// internal
void Thermocycler::Loop() {
digitalWrite(6, (lamp)?HIGH:LOW);
digitalWrite(5, (!lamp)?HIGH:LOW);
lamp = !lamp;
switch (iProgramState) {
case EStartup:
if (millis() > STARTUP_DELAY) {
iProgramState = EStopped;
iRestarted = false;
if (!iRestarted && !ipSerialControl->CommandReceived()) {
//check for stored program
SCommand command;
if (ProgramStore::RetrieveProgram(command, (char*)ipSerialControl->GetBuffer()))
ProcessCommand(command);
}
}
break;
case ELidWait:
if (GetLidTemp() >= iTargetLidTemp - LID_START_TOLERANCE) {
//lid has warmed, begin program
iThermalDirection = OFF;
iPeltierPwm = 0;
PreprocessProgram();
iProgramState = ERunning;
ipProgram->BeginIteration();
AdvanceToNextStep();
iProgramStartTimeMs = millis();
}
break;
case ERunning:
//update program
if (iProgramState == ERunning) {
if (iRamping && abs(ipCurrentStep->GetTemp() - GetPlateTemp()) <= CYCLE_START_TOLERANCE && GetRampElapsedTimeMs() > ipCurrentStep->GetRampDurationS() * 1000) {
//begin step hold
//eta updates
if (ipCurrentStep->GetRampDurationS() == 0) {
//fast ramp
iElapsedFastRampDegrees += absf(GetPlateTemp() - iRampStartTemp);
iTotalElapsedFastRampDurationMs += millis() - iRampStartTime;
}
if (iRampStartTemp > GetPlateTemp()) {
iHasCooled = true;
}
iRamping = false;
iCycleStartTime = millis();
}
else if (!iRamping && !ipCurrentStep->IsFinal() && millis() - iCycleStartTime > (unsigned long)ipCurrentStep->GetStepDurationS() * 1000) {
//begin next step
AdvanceToNextStep();
//check for program completion
if (ipCurrentStep == NULL || ipCurrentStep->IsFinal()) {
iProgramState = EComplete;
}
}
}
break;
case EComplete:
if (iRamping && ipCurrentStep != NULL && abs(ipCurrentStep->GetTemp() - GetPlateTemp()) <= CYCLE_START_TOLERANCE)
iRamping = false;
break;
}
//lid
iLidThermistor.ReadTemp();
ControlLid();
//plate
iPlateThermistor.ReadTemp();
CalcPlateTarget();
ControlPeltier();
//program
UpdateEta();
ipDisplay->Update();
ipSerialControl->Process();
}
// internal
boolean Thermocycler::Loop() {
ipCommunicator->Process();
unsigned long loopElapsedTimeMs = millis() - iPrevLoopStartTimeMs;
iPrevLoopStartTimeMs = millis();
switch (iProgramState) {
case EStartup:
iTempUpdated = false;
if (millis() > STARTUP_DELAY) {
iProgramState = EStopped;
iRestarted = false;
if (!iRestarted && !ipCommunicator->CommandReceived()) {
//check for stored program
SCommand command;
/*
if (ProgramStore::RetrieveProgram(command, (char*)ipCommunicator->GetBuffer())) {
ProcessCommand(command);
}
*/
}
}
break;
case ELidWait:
if (GetLidTemp() >= iTargetLidTemp - LID_START_TOLERANCE) {
//lid has warmed, begin program
iThermalDirection = OFF;
iPeltierPwm = 0;
PreprocessProgram();
iProgramState = ERunning;
ipProgram->BeginIteration();
AdvanceToNextStep();
iProgramStartTimeMs = millis();
}
break;
case ERunning:
//update program
if (!iPaused) {
if (iRamping) {
// Increment ramping time
iRampElapsedTimeMs += loopElapsedTimeMs;
} else {
// Increment holding time
iCycleElapsedTimeMs += loopElapsedTimeMs;
}
if (iProgramState == ERunning) {
if (!ipCurrentStep->IsFinal() && (iNextStepPending || iNextCyclePending)) {
if (iNextStepPending) {
iNextStepPending = false;
AdvanceToNextStep();
}
if (iNextCyclePending) {
iNextCyclePending = false;
AdvanceToNextCycle();
}
//check for program completion
if (ipCurrentStep == NULL || ipCurrentStep->IsFinal()) {
iProgramState = EComplete;
}
} else if (iRamping && abs(ipCurrentStep->GetTemp() - GetTemp()) <= CYCLE_START_TOLERANCE && GetRampElapsedTimeMs() > ipCurrentStep->GetRampDurationS() * 1000) {
//begin step hold
//eta updates
if (ipCurrentStep->GetRampDurationS() == 0) {
//fast ramp
iElapsedFastRampDegrees += absf(GetTemp() - iRampStartTemp);
iTotalElapsedFastRampDurationMs += iRampElapsedTimeMs;
}
if (iRampStartTemp > GetTemp()) {
iHasCooled = true;
}
iRamping = false;
iCycleElapsedTimeMs = 0;
}
else if (!iRamping && !ipCurrentStep->IsFinal() && iCycleElapsedTimeMs > (unsigned long)ipCurrentStep->GetStepDurationS() * 1000) {
//begin next step
AdvanceToNextStep();
//check for program completion
if (ipCurrentStep == NULL || ipCurrentStep->IsFinal()) {
iProgramState = EComplete;
}
}
}
break;
case EComplete:
PCR_DEBUG_LINE(ipCurrentStep->GetTemp());
if (iRamping && ipCurrentStep != NULL && abs(ipCurrentStep->GetTemp() - GetTemp()) <= CYCLE_START_TOLERANCE) {
iRamping = false;
}
break;
}
}
statusBuff[statusIndex].timestamp = millis();
//Read lid and well temp
statusBuff[statusIndex].hardwareStatus = HARD_NO_ERROR;
HardwareStatus result = iPlateThermistor.ReadTemp();
if (result!=HARD_NO_ERROR) {
statusBuff[statusIndex].hardwareStatus = result;
}
result = iLidThermistor.ReadTemp();
if (result!=HARD_NO_ERROR) {
statusBuff[statusIndex].hardwareStatus = result;
}
statusBuff[statusIndex].lidTemp = GetLidTemp();
statusBuff[statusIndex].wellTemp = GetPlateTemp();
float lidTemp = 0;
float wellTemp = 0;
CheckHardware(&lidTemp, &wellTemp);
PCR_DEBUG("L=");
PCR_DEBUG(lidTemp);
PCR_DEBUG(" W=wellTemp");
PCR_DEBUG_LINE(wellTemp);
iLidThermistor.setTemp(lidTemp);
iPlateThermistor.setTemp(wellTemp);
double estimatedAirTemp = wellTemp * 0.4 + lidTemp * 0.6;
// Estimated delta to next 1 sec
double diff = ((wellTemp - iEstimatedSampleTemp)/THETA_WELL + (estimatedAirTemp-iEstimatedSampleTemp)/THETA_LID ) / CAPACITY_TUBE;
if (!iTempUpdated) {
iTempUpdated = true;
iEstimatedSampleTemp = estimatedAirTemp;
} else if ( 5>diff && diff > -5) {
iEstimatedSampleTemp += diff;
}
CalcPlateTarget();
// Check error
//if (iHardwareStatus==HARD_NO_ERROR || true) { //TODO WELL_TEST (dummy line)
if (iHardwareStatus==HARD_NO_ERROR) { //TODO WELL_TEST
ControlLid();
ControlPeltier();
if (iHardwareStatus!=HARD_NO_ERROR) {
PCR_DEBUG("ERR=");
PCR_DEBUG_LINE(iHardwareStatus);
}
} else {
PCR_DEBUG_LINE("ALL OFF");
iProgramState = EError;
SetPeltier(OFF, 0);
SetLidOutput(0);
}
//program
UpdateEta();
#ifdef USE_LCD
ipDisplay->Update();
#endif
statusIndex = (statusIndex+1) % CyclerStatusBuffSize;
statusCount++;
return true;
}
void Thermocycler::Loop()
{
switch (m_program_state)
{
case EStartup:
if (millis() > STARTUP_DELAY) {
m_program_state = EStopped;
//if (!m_is_restarted && !m_serial_control->CommandReceived())
{
//check for stored program
//SCommand command;
//if (ProgramStore::RetrieveProgram(command, (char*)m_serial_control->GetBuffer()))
// ProcessCommand(command);
}
}
break;
case ELidWait:
if (GetLidTemp() >= m_target_lid_temp - LID_START_TOLERANCE) {
//lid has warmed, begin program
m_thermal_direction = OFF;
m_peltier_pwm = 0;
PreprocessProgram();
m_program_state = ERunning;
m_program->BeginIteration();
AdvanceToNextStep();
m_program_start_time_ms = millis();
}
break;
case ERunning:
//update program
if (m_program_state == ERunning) {
if (m_is_ramping && abs(m_current_step->GetTemp() - GetPlateTemp()) <= CYCLE_START_TOLERANCE && GetRampElapsedTimeMs() > m_current_step->GetRampDurationS() * 1000) {
//begin step hold
//eta updates
if (m_current_step->GetRampDurationS() == 0) {
//fast ramp
m_elapsed_fast_ramp_degrees += fabs(GetPlateTemp() - m_ramp_start_temp);
m_total_elapsed_fast_ramp_duration_ms += millis() - m_ramp_start_time;
}
if (m_ramp_start_temp > GetPlateTemp())
m_has_cooled = true;
m_is_ramping = false;
m_cycle_start_time = millis();
} else if (!m_is_ramping && !m_current_step->IsFinal() && millis() - m_cycle_start_time > (unsigned long)m_current_step->GetStepDurationS() * 1000) {
//begin next step
AdvanceToNextStep();
//check for program completion
if (m_current_step == NULL || m_current_step->IsFinal())
m_program_state = EComplete;
}
}
break;
case EComplete:
if (m_is_ramping && m_current_step != NULL && abs(m_current_step->GetTemp() - GetPlateTemp()) <= CYCLE_START_TOLERANCE)
m_is_ramping = false;
break;
case EStopped: //Nothing
case EError: //Nothing
case EClear: //Nothing
break;
}
//lid
m_lid_thermistor.ReadTemp();
ControlLid();
//plate
m_plate_thermistor.ReadTemp();
CalcPlateTarget();
ControlPeltier();
//program
UpdateEta();
m_display->Update();
m_serial_control->Process();
}