// Tries detecting a memory leak on the particular input that we have just
// executed before calling this function.
void Fuzzer::TryDetectingAMemoryLeak(uint8_t *Data, size_t Size) {
if (!HasMoreMallocsThanFrees) return; // mallocs==frees, a leak is unlikely.
if (!Options.DetectLeaks) return;
if (!&__lsan_enable || !&__lsan_disable || !__lsan_do_recoverable_leak_check)
return; // No lsan.
// Run the target once again, but with lsan disabled so that if there is
// a real leak we do not report it twice.
__lsan_disable();
RunOneAndUpdateCorpus(Data, Size);
__lsan_enable();
if (!HasMoreMallocsThanFrees) return; // a leak is unlikely.
if (NumberOfLeakDetectionAttempts++ > 1000) {
Options.DetectLeaks = false;
Printf("INFO: libFuzzer disabled leak detection after every mutation.\n"
" Most likely the target function accumulates allocated\n"
" memory in a global state w/o actually leaking it.\n"
" If LeakSanitizer is enabled in this process it will still\n"
" run on the process shutdown.\n");
return;
}
// Now perform the actual lsan pass. This is expensive and we must ensure
// we don't call it too often.
if (__lsan_do_recoverable_leak_check()) { // Leak is found, report it.
CurrentUnitData = Data;
CurrentUnitSize = Size;
DumpCurrentUnit("leak-");
PrintFinalStats();
_Exit(Options.ErrorExitCode); // not exit() to disable lsan further on.
}
}
void Fuzzer::AlarmCallback() {
assert(Options.UnitTimeoutSec > 0);
if (!CurrentUnitSize)
return; // We have not started running units yet.
size_t Seconds =
duration_cast<seconds>(system_clock::now() - UnitStartTime).count();
if (Seconds == 0)
return;
if (Options.Verbosity >= 2)
Printf("AlarmCallback %zd\n", Seconds);
if (Seconds >= (size_t)Options.UnitTimeoutSec) {
Printf("ALARM: working on the last Unit for %zd seconds\n", Seconds);
Printf(" and the timeout value is %d (use -timeout=N to change)\n",
Options.UnitTimeoutSec);
if (CurrentUnitSize <= kMaxUnitSizeToPrint) {
PrintHexArray(CurrentUnitData, CurrentUnitSize, "\n");
PrintASCII(CurrentUnitData, CurrentUnitSize, "\n");
}
WriteUnitToFileWithPrefix(
{CurrentUnitData, CurrentUnitData + CurrentUnitSize}, "timeout-");
Printf("==%d== ERROR: libFuzzer: timeout after %d seconds\n", GetPid(),
Seconds);
if (__sanitizer_print_stack_trace)
__sanitizer_print_stack_trace();
Printf("SUMMARY: libFuzzer: timeout\n");
PrintFinalStats();
if (Options.AbortOnTimeout)
abort();
exit(Options.TimeoutExitCode);
}
}
NO_SANITIZE_MEMORY
void Fuzzer::DeathCallback() {
if (!CurrentUnitSize) return;
Printf("DEATH:\n");
DumpCurrentUnit("crash-");
PrintFinalStats();
}
static int SolveIt(void *kmem, N_Vector u, N_Vector s, int glstr, int mset)
{
int flag;
printf("\n");
if (mset==1)
printf("Exact Newton");
else
printf("Modified Newton");
if (glstr == KIN_NONE)
printf("\n");
else
printf(" with line search\n");
flag = KINSetMaxSetupCalls(kmem, mset);
if (check_flag(&flag, "KINSetMaxSetupCalls", 1)) return(1);
flag = KINSol(kmem, u, glstr, s, s);
if (check_flag(&flag, "KINSol", 1)) return(1);
printf("Solution:\n [x1,x2] = ");
PrintOutput(u);
PrintFinalStats(kmem);
return(0);
}
void Fuzzer::DeathCallback() {
if (!CurrentUnitSize) return;
Printf("DEATH:\n");
if (CurrentUnitSize <= kMaxUnitSizeToPrint) {
PrintHexArray(CurrentUnitData, CurrentUnitSize, "\n");
PrintASCII(CurrentUnitData, CurrentUnitSize, "\n");
}
WriteUnitToFileWithPrefix(
{CurrentUnitData, CurrentUnitData + CurrentUnitSize}, "crash-");
PrintFinalStats();
}
void Fuzzer::CrashCallback() {
Printf("==%d== ERROR: libFuzzer: deadly signal\n", GetPid());
if (__sanitizer_print_stack_trace)
__sanitizer_print_stack_trace();
Printf("NOTE: libFuzzer has rudimentary signal handlers.\n"
" Combine libFuzzer with AddressSanitizer or similar for better "
"crash reports.\n");
Printf("SUMMARY: libFuzzer: deadly signal\n");
DumpCurrentUnit("crash-");
PrintFinalStats();
exit(Options.ErrorExitCode);
}
int main(void)
{
realtype dx, dy, reltol, abstol, t, tout, umax;
N_Vector u, up;
UserData data;
void *cvode_mem;
int iout, flag;
long int nst;
u = NULL;
data = NULL;
cvode_mem = NULL;
u = N_VNew_Serial(NEQ);
up = N_VNew_Serial(NEQ);
reltol = ZERO;
abstol = ATOL;
data = (UserData) malloc(sizeof *data);
dx = data->dx = XMAX/(MX+1);
dy = data->dy = YMAX/(MY+1);
data->hdcoef = ONE/(dx*dx);
data->hacoef = HALF/(TWO*dx);
data->vdcoef = ONE/(dy*dy);
SetIC(u, data);
cvode_mem = CPodeCreate(CP_EXPL, CP_BDF, CP_NEWTON);
flag = CPodeInit(cvode_mem, (void *)f, data, T0, u, NULL, CP_SS, reltol, &abstol);
flag = CPLapackBand(cvode_mem, NEQ, MY, MY);
flag = CPDlsSetJacFn(cvode_mem, (void *)Jac, data);
/* In loop over output points: call CPode, print results, test for errors */
umax = N_VMaxNorm(u);
PrintHeader(reltol, abstol, umax);
for(iout=1, tout=T1; iout <= NOUT; iout++, tout += DTOUT) {
flag = CPode(cvode_mem, tout, &t, u, up, CP_NORMAL);
umax = N_VMaxNorm(u);
flag = CPodeGetNumSteps(cvode_mem, &nst);
PrintOutput(t, umax, nst);
}
PrintFinalStats(cvode_mem);
N_VDestroy_Serial(u);
CPodeFree(&cvode_mem);
free(data);
return(0);
}
NO_SANITIZE_MEMORY
void Fuzzer::AlarmCallback() {
assert(Options.UnitTimeoutSec > 0);
if (InOOMState) {
Printf("==%d== ERROR: libFuzzer: out-of-memory (used: %zdMb; limit: %zdMb)\n",
GetPid(), GetPeakRSSMb(), Options.RssLimitMb);
Printf(" To change the out-of-memory limit use -rss_limit_mb=<N>\n");
if (CurrentUnitSize && CurrentUnitData) {
DumpCurrentUnit("oom-");
if (__sanitizer_print_stack_trace)
__sanitizer_print_stack_trace();
}
Printf("SUMMARY: libFuzzer: out-of-memory\n");
PrintFinalStats();
_Exit(Options.ErrorExitCode); // Stop right now.
}
if (!CurrentUnitSize)
return; // We have not started running units yet.
size_t Seconds =
duration_cast<seconds>(system_clock::now() - UnitStartTime).count();
if (Seconds == 0)
return;
if (Options.Verbosity >= 2)
Printf("AlarmCallback %zd\n", Seconds);
if (Seconds >= (size_t)Options.UnitTimeoutSec) {
Printf("ALARM: working on the last Unit for %zd seconds\n", Seconds);
Printf(" and the timeout value is %d (use -timeout=N to change)\n",
Options.UnitTimeoutSec);
DumpCurrentUnit("timeout-");
Printf("==%d== ERROR: libFuzzer: timeout after %d seconds\n", GetPid(),
Seconds);
if (__sanitizer_print_stack_trace)
__sanitizer_print_stack_trace();
Printf("SUMMARY: libFuzzer: timeout\n");
PrintFinalStats();
_Exit(Options.TimeoutExitCode); // Stop right now.
}
}
// Tries to call lsan, and if there are leaks exits. We call this right after
// the initial corpus was read because if there are leaky inputs in the corpus
// further fuzzing will likely hit OOMs.
void Fuzzer::CheckForMemoryLeaks() {
if (!Options.DetectLeaks) return;
if (!__lsan_do_recoverable_leak_check)
return;
if (__lsan_do_recoverable_leak_check()) {
Printf("==%d== ERROR: libFuzzer: initial corpus triggers memory leaks.\n"
"Exiting now. Use -detect_leaks=0 to disable leak detection here.\n"
"LeakSanitizer will still check for leaks at the process exit.\n",
GetPid());
PrintFinalStats();
_Exit(Options.ErrorExitCode);
}
}
static void Problem2(void)
{
void *fct;
void *cpode_mem;
N_Vector y, yp;
realtype reltol=RTOL, abstol=ATOL, t, tout, erm, hu;
int flag, iout, qu;
y = NULL;
yp = NULL;
cpode_mem = NULL;
y = N_VNew_Serial(P2_NEQ);
N_VConst(ZERO, y);
NV_Ith_S(y,0) = ONE;
yp = N_VNew_Serial(P2_NEQ);
if (ODE == CP_EXPL) {
fct = (void *)f2;
} else {
fct = (void *)res2;
f2(P2_T0, y, yp, NULL);
}
cpode_mem = CPodeCreate(ODE, CP_ADAMS, CP_FUNCTIONAL);
/* flag = CPodeSetInitStep(cpode_mem, 2.0e-9);*/
flag = CPodeInit(cpode_mem, fct, NULL, P2_T0, y, yp, CP_SS, reltol, &abstol);
printf("\n t max.err qu hu \n");
for(iout=1, tout=P2_T1; iout <= P2_NOUT; iout++, tout*=P2_TOUT_MULT) {
flag = CPode(cpode_mem, tout, &t, y, yp, CP_NORMAL);
if (flag != CP_SUCCESS) break;
erm = MaxError(y, t);
flag = CPodeGetLastOrder(cpode_mem, &qu);
flag = CPodeGetLastStep(cpode_mem, &hu);
printf("%10.3f %12.4le %2d %12.4le\n", t, erm, qu, hu);
}
PrintFinalStats(cpode_mem);
CPodeFree(&cpode_mem);
N_VDestroy_Serial(y);
N_VDestroy_Serial(yp);
return;
}
int main()
{
void *fct;
void *cpode_mem;
N_Vector y, yp;
realtype reltol=RTOL, abstol=ATOL, t, tout, hu;
int flag, iout, qu;
y = NULL;
yp = NULL;
cpode_mem = NULL;
y = N_VNew_Serial(P1_NEQ);
NV_Ith_S(y,0) = TWO;
NV_Ith_S(y,1) = ZERO;
yp = N_VNew_Serial(P1_NEQ);
if (ODE == CP_EXPL) {
fct = (void *)f;
} else {
fct = (void *)res;
f(P1_T0, y, yp, NULL);
}
cpode_mem = CPodeCreate(ODE, CP_ADAMS, CP_FUNCTIONAL);
/* flag = CPodeSetInitStep(cpode_mem, 4.0e-9);*/
flag = CPodeInit(cpode_mem, fct, NULL, P1_T0, y, yp, CP_SS, reltol, &abstol);
printf("\n t x xdot qu hu \n");
for(iout=1, tout=P1_T1; iout <= P1_NOUT; iout++, tout += P1_DTOUT) {
flag = CPode(cpode_mem, tout, &t, y, yp, CP_NORMAL);
if (flag != CP_SUCCESS) break;
flag = CPodeGetLastOrder(cpode_mem, &qu);
flag = CPodeGetLastStep(cpode_mem, &hu);
printf("%10.5f %12.5le %12.5le %2d %6.4le\n", t, NV_Ith_S(y,0), NV_Ith_S(y,1), qu, hu);
}
PrintFinalStats(cpode_mem);
CPodeFree(&cpode_mem);
N_VDestroy_Serial(y);
N_VDestroy_Serial(yp);
return 0;
}
int main()
{
realtype fnormtol, scsteptol;
N_Vector y, scale, constraints;
int mset, flag, i;
void *kmem;
SUNMatrix J;
SUNLinearSolver LS;
y = scale = constraints = NULL;
kmem = NULL;
J = NULL;
LS = NULL;
printf("\nRobot Kinematics Example\n");
printf("8 variables; -1 <= x_i <= 1\n");
printf("KINSOL problem size: 8 + 2*8 = 24 \n\n");
/* Create vectors for solution, scales, and constraints */
y = N_VNew_Serial(NEQ);
if (check_flag((void *)y, "N_VNew_Serial", 0)) return(1);
scale = N_VNew_Serial(NEQ);
if (check_flag((void *)scale, "N_VNew_Serial", 0)) return(1);
constraints = N_VNew_Serial(NEQ);
if (check_flag((void *)constraints, "N_VNew_Serial", 0)) return(1);
/* Initialize and allocate memory for KINSOL */
kmem = KINCreate();
if (check_flag((void *)kmem, "KINCreate", 0)) return(1);
flag = KINInit(kmem, func, y); /* y passed as a template */
if (check_flag(&flag, "KINInit", 1)) return(1);
/* Set optional inputs */
N_VConst_Serial(ZERO,constraints);
for (i = NVAR+1; i <= NEQ; i++) Ith(constraints, i) = ONE;
flag = KINSetConstraints(kmem, constraints);
if (check_flag(&flag, "KINSetConstraints", 1)) return(1);
fnormtol = FTOL;
flag = KINSetFuncNormTol(kmem, fnormtol);
if (check_flag(&flag, "KINSetFuncNormTol", 1)) return(1);
scsteptol = STOL;
flag = KINSetScaledStepTol(kmem, scsteptol);
if (check_flag(&flag, "KINSetScaledStepTol", 1)) return(1);
/* Create dense SUNMatrix */
J = SUNDenseMatrix(NEQ, NEQ);
if(check_flag((void *)J, "SUNDenseMatrix", 0)) return(1);
/* Create dense SUNLinearSolver object */
LS = SUNLinSol_Dense(y, J);
if(check_flag((void *)LS, "SUNLinSol_Dense", 0)) return(1);
/* Attach the matrix and linear solver to KINSOL */
flag = KINSetLinearSolver(kmem, LS, J);
if(check_flag(&flag, "KINSetLinearSolver", 1)) return(1);
/* Set the Jacobian function */
flag = KINSetJacFn(kmem, jac);
if (check_flag(&flag, "KINSetJacFn", 1)) return(1);
/* Indicate exact Newton */
mset = 1;
flag = KINSetMaxSetupCalls(kmem, mset);
if (check_flag(&flag, "KINSetMaxSetupCalls", 1)) return(1);
/* Initial guess */
N_VConst_Serial(ONE, y);
for(i = 1; i <= NVAR; i++) Ith(y,i) = SUNRsqrt(TWO)/TWO;
printf("Initial guess:\n");
PrintOutput(y);
/* Call KINSol to solve problem */
N_VConst_Serial(ONE,scale);
flag = KINSol(kmem, /* KINSol memory block */
y, /* initial guess on input; solution vector */
KIN_LINESEARCH, /* global strategy choice */
scale, /* scaling vector, for the variable cc */
scale); /* scaling vector for function values fval */
if (check_flag(&flag, "KINSol", 1)) return(1);
printf("\nComputed solution:\n");
PrintOutput(y);
/* Print final statistics and free memory */
PrintFinalStats(kmem);
N_VDestroy_Serial(y);
N_VDestroy_Serial(scale);
N_VDestroy_Serial(constraints);
KINFree(&kmem);
SUNLinSolFree(LS);
SUNMatDestroy(J);
return(0);
}
void Fuzzer::InterruptCallback() {
Printf("==%d== libFuzzer: run interrupted; exiting\n", GetPid());
PrintFinalStats();
_Exit(0); // Stop right now, don't perform any at-exit actions.
}
int main()
{
realtype abstol=ATOL, reltol=RTOL, t, tout;
N_Vector c;
WebData wdata;
void *cvode_mem;
booleantype firstrun;
int jpre, gstype, flag;
int ns, mxns, iout;
c = NULL;
wdata = NULL;
cvode_mem = NULL;
/* Initializations */
c = N_VNew_Serial(NEQ);
if(check_flag((void *)c, "N_VNew_Serial", 0)) return(1);
wdata = AllocUserData();
if(check_flag((void *)wdata, "AllocUserData", 2)) return(1);
InitUserData(wdata);
ns = wdata->ns;
mxns = wdata->mxns;
/* Print problem description */
PrintIntro();
/* Loop over jpre and gstype (four cases) */
for (jpre = PREC_LEFT; jpre <= PREC_RIGHT; jpre++) {
for (gstype = MODIFIED_GS; gstype <= CLASSICAL_GS; gstype++) {
/* Initialize c and print heading */
CInit(c, wdata);
PrintHeader(jpre, gstype);
/* Call CVodeInit or CVodeReInit, then CVSpgmr to set up problem */
firstrun = (jpre == PREC_LEFT) && (gstype == MODIFIED_GS);
if (firstrun) {
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
wdata->cvode_mem = cvode_mem;
flag = CVodeSetUserData(cvode_mem, wdata);
if(check_flag(&flag, "CVodeSetUserData", 1)) return(1);
flag = CVodeInit(cvode_mem, f, T0, c);
if(check_flag(&flag, "CVodeInit", 1)) return(1);
flag = CVodeSStolerances(cvode_mem, reltol, abstol);
if (check_flag(&flag, "CVodeSStolerances", 1)) return(1);
flag = CVSpgmr(cvode_mem, jpre, MAXL);
if(check_flag(&flag, "CVSpgmr", 1)) return(1);
flag = CVSpilsSetGSType(cvode_mem, gstype);
if(check_flag(&flag, "CVSpilsSetGSType", 1)) return(1);
flag = CVSpilsSetEpsLin(cvode_mem, DELT);
if(check_flag(&flag, "CVSpilsSetEpsLin", 1)) return(1);
flag = CVSpilsSetPreconditioner(cvode_mem, Precond, PSolve);
if(check_flag(&flag, "CVSpilsSetPreconditioner", 1)) return(1);
} else {
flag = CVodeReInit(cvode_mem, T0, c);
if(check_flag(&flag, "CVodeReInit", 1)) return(1);
flag = CVSpilsSetPrecType(cvode_mem, jpre);
check_flag(&flag, "CVSpilsSetPrecType", 1);
flag = CVSpilsSetGSType(cvode_mem, gstype);
if(check_flag(&flag, "CVSpilsSetGSType", 1)) return(1);
}
/* Print initial values */
if (firstrun) PrintAllSpecies(c, ns, mxns, T0);
/* Loop over output points, call CVode, print sample solution values. */
tout = T1;
for (iout = 1; iout <= NOUT; iout++) {
flag = CVode(cvode_mem, tout, c, &t, CV_NORMAL);
PrintOutput(cvode_mem, t);
if (firstrun && (iout % 3 == 0)) PrintAllSpecies(c, ns, mxns, t);
if(check_flag(&flag, "CVode", 1)) break;
if (tout > RCONST(0.9)) tout += DTOUT;
else tout *= TOUT_MULT;
}
/* Print final statistics, and loop for next case */
PrintFinalStats(cvode_mem);
}
}
/* Free all memory */
CVodeFree(&cvode_mem);
N_VDestroy_Serial(c);
FreeUserData(wdata);
return(0);
}
int main()
{
realtype t, tout;
N_Vector y;
void *cvode_mem;
int flag, flagr, iout;
int rootsfound[2];
y = NULL;
cvode_mem = NULL;
/* Create serial vector of length NEQ for I.C. */
y = N_VNew_Serial(NEQ);
if (check_flag((void *)y, "N_VNew_Serial", 0)) return(1);
/* Initialize y */
Ith(y,1) = Y1;
Ith(y,2) = Y2;
Ith(y,3) = Y3;
/* Call CVodeCreate to create the solver memory and specify the
* Backward Differentiation Formula and the use of a Newton iteration */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if (check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
/* Call CVodeInit to initialize the integrator memory and specify the
* user's right hand side function in y'=f(t,y), the inital time T0, and
* the initial dependent variable vector y. */
flag = CVodeInit(cvode_mem, f, T0, y);
if (check_flag(&flag, "CVodeInit", 1)) return(1);
/* Use private function to compute error weights */
flag = CVodeWFtolerances(cvode_mem, ewt);
if (check_flag(&flag, "CVodeSetEwtFn", 1)) return(1);
/* Call CVodeRootInit to specify the root function g with 2 components */
flag = CVodeRootInit(cvode_mem, 2, g);
if (check_flag(&flag, "CVodeRootInit", 1)) return(1);
/* Call CVDense to specify the CVDENSE dense linear solver */
flag = CVDense(cvode_mem, NEQ);
if (check_flag(&flag, "CVDense", 1)) return(1);
/* Set the Jacobian routine to Jac (user-supplied) */
flag = CVDlsSetDenseJacFn(cvode_mem, Jac);
if (check_flag(&flag, "CVDlsSetDenseJacFn", 1)) return(1);
/* In loop, call CVode, print results, and test for error.
Break out of loop when NOUT preset output times have been reached. */
printf(" \n3-species kinetics problem\n\n");
iout = 0; tout = T1;
while(1) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
PrintOutput(t, Ith(y,1), Ith(y,2), Ith(y,3));
if (flag == CV_ROOT_RETURN) {
flagr = CVodeGetRootInfo(cvode_mem, rootsfound);
check_flag(&flagr, "CVodeGetRootInfo", 1);
PrintRootInfo(rootsfound[0],rootsfound[1]);
}
if (check_flag(&flag, "CVode", 1)) break;
if (flag == CV_SUCCESS) {
iout++;
tout *= TMULT;
}
if (iout == NOUT) break;
}
/* Print some final statistics */
PrintFinalStats(cvode_mem);
/* Free y vector */
N_VDestroy_Serial(y);
/* Free integrator memory */
CVodeFree(&cvode_mem);
return(0);
}
static int Problem1(void)
{
realtype reltol=RTOL, abstol=ATOL, t, tout, ero, er;
int miter, flag, temp_flag, iout, nerr=0;
N_Vector y;
void *cvode_mem;
booleantype firstrun;
int qu;
realtype hu;
y = NULL;
cvode_mem = NULL;
y = N_VNew_Serial(P1_NEQ);
if(check_flag((void *)y, "N_VNew_Serial", 0)) return(1);
PrintIntro1();
cvode_mem = CVodeCreate(CV_ADAMS, CV_FUNCTIONAL);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
for (miter=FUNC; miter <= DIAG; miter++) {
ero = ZERO;
NV_Ith_S(y,0) = TWO;
NV_Ith_S(y,1) = ZERO;
firstrun = (miter==FUNC);
if (firstrun) {
flag = CVodeMalloc(cvode_mem, f1, P1_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeMalloc", 1)) return(1);
} else {
flag = CVodeSetIterType(cvode_mem, CV_NEWTON);
if(check_flag(&flag, "CVodeSetIterType", 1)) ++nerr;
flag = CVodeReInit(cvode_mem, f1, P1_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeReInit", 1)) return(1);
}
flag = PrepareNextRun(cvode_mem, CV_ADAMS, miter, 0, 0);
if(check_flag(&flag, "PrepareNextRun", 1)) return(1);
PrintHeader1();
for(iout=1, tout=P1_T1; iout <= P1_NOUT; iout++, tout += P1_DTOUT) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
check_flag(&flag, "CVode", 1);
temp_flag = CVodeGetLastOrder(cvode_mem, &qu);
if(check_flag(&temp_flag, "CVodeGetLastOrder", 1)) ++nerr;
temp_flag = CVodeGetLastStep(cvode_mem, &hu);
if(check_flag(&temp_flag, "CVodeGetLastStep", 1)) ++nerr;
PrintOutput1(t, NV_Ith_S(y,0), NV_Ith_S(y,1), qu, hu);
if (flag != CV_SUCCESS) {
nerr++;
break;
}
if (iout%2 == 0) {
er = ABS(NV_Ith_S(y,0)) / abstol;
if (er > ero) ero = er;
if (er > P1_TOL_FACTOR) {
nerr++;
PrintErrOutput(P1_TOL_FACTOR);
}
}
}
PrintFinalStats(cvode_mem, miter, ero);
}
CVodeFree(cvode_mem);
cvode_mem = CVodeCreate(CV_BDF, CV_FUNCTIONAL);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
for (miter=FUNC; miter <= DIAG; miter++) {
ero = ZERO;
NV_Ith_S(y,0) = TWO;
NV_Ith_S(y,1) = ZERO;
firstrun = (miter==FUNC);
if (firstrun) {
flag = CVodeMalloc(cvode_mem, f1, P1_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeMalloc", 1)) return(1);
} else {
flag = CVodeSetIterType(cvode_mem, CV_NEWTON);
if(check_flag(&flag, "CVodeSetIterType", 1)) ++nerr;
flag = CVodeReInit(cvode_mem, f1, P1_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeReInit", 1)) return(1);
}
flag = PrepareNextRun(cvode_mem, CV_BDF, miter, 0, 0);
if(check_flag(&flag, "PrepareNextRun", 1)) return(1);
PrintHeader1();
for(iout=1, tout=P1_T1; iout <= P1_NOUT; iout++, tout += P1_DTOUT) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
check_flag(&flag, "CVode", 1);
temp_flag = CVodeGetLastOrder(cvode_mem, &qu);
if(check_flag(&temp_flag, "CVodeGetLastOrder", 1)) ++nerr;
temp_flag = CVodeGetLastStep(cvode_mem, &hu);
if(check_flag(&temp_flag, "CVodeGetLastStep", 1)) ++nerr;
PrintOutput1(t, NV_Ith_S(y,0), NV_Ith_S(y,1), qu, hu);
if (flag != CV_SUCCESS) {
nerr++;
break;
}
if (iout%2 == 0) {
er = ABS(NV_Ith_S(y,0)) / abstol;
if (er > ero) ero = er;
if (er > P1_TOL_FACTOR) {
nerr++;
PrintErrOutput(P1_TOL_FACTOR);
}
}
}
PrintFinalStats(cvode_mem, miter, ero);
}
CVodeFree(cvode_mem);
N_VDestroy_Serial(y);
return(nerr);
}
int main(void)
{
int globalstrategy;
realtype fnormtol, scsteptol;
N_Vector cc, sc, constraints;
UserData data;
int flag, maxl, maxlrst;
void *kmem;
cc = sc = constraints = NULL;
kmem = NULL;
data = NULL;
/* Allocate memory, and set problem data, initial values, tolerances */
globalstrategy = KIN_NONE;
data = AllocUserData();
if (check_flag((void *)data, "AllocUserData", 2)) return(1);
InitUserData(data);
/* Create serial vectors of length NEQ */
cc = N_VNew_Serial(NEQ);
if (check_flag((void *)cc, "N_VNew_Serial", 0)) return(1);
sc = N_VNew_Serial(NEQ);
if (check_flag((void *)sc, "N_VNew_Serial", 0)) return(1);
data->rates = N_VNew_Serial(NEQ);
if (check_flag((void *)data->rates, "N_VNew_Serial", 0)) return(1);
constraints = N_VNew_Serial(NEQ);
if (check_flag((void *)constraints, "N_VNew_Serial", 0)) return(1);
N_VConst(TWO, constraints);
SetInitialProfiles(cc, sc);
fnormtol=FTOL; scsteptol=STOL;
/* Call KINCreate/KINInit to initialize KINSOL.
A pointer to KINSOL problem memory is returned and stored in kmem. */
kmem = KINCreate();
if (check_flag((void *)kmem, "KINCreate", 0)) return(1);
/* Vector cc passed as template vector. */
flag = KINInit(kmem, func, cc);
if (check_flag(&flag, "KINInit", 1)) return(1);
flag = KINSetUserData(kmem, data);
if (check_flag(&flag, "KINSetUserData", 1)) return(1);
flag = KINSetConstraints(kmem, constraints);
if (check_flag(&flag, "KINSetConstraints", 1)) return(1);
flag = KINSetFuncNormTol(kmem, fnormtol);
if (check_flag(&flag, "KINSetFuncNormTol", 1)) return(1);
flag = KINSetScaledStepTol(kmem, scsteptol);
if (check_flag(&flag, "KINSetScaledStepTol", 1)) return(1);
/* We no longer need the constraints vector since KINSetConstraints
creates a private copy for KINSOL to use. */
N_VDestroy_Serial(constraints);
/* Call KINSpgmr to specify the linear solver KINSPGMR with preconditioner
routines PrecSetupBD and PrecSolveBD. */
maxl = 15;
maxlrst = 2;
flag = KINSpgmr(kmem, maxl);
if (check_flag(&flag, "KINSpgmr", 1)) return(1);
flag = KINSpilsSetMaxRestarts(kmem, maxlrst);
if (check_flag(&flag, "KINSpilsSetMaxRestarts", 1)) return(1);
flag = KINSpilsSetPreconditioner(kmem,
PrecSetupBD,
PrecSolveBD);
if (check_flag(&flag, "KINSpilsSetPreconditioner", 1)) return(1);
/* Print out the problem size, solution parameters, initial guess. */
PrintHeader(globalstrategy, maxl, maxlrst, fnormtol, scsteptol);
/* Call KINSol and print output concentration profile */
flag = KINSol(kmem, /* KINSol memory block */
cc, /* initial guess on input; solution vector */
globalstrategy, /* global stragegy choice */
sc, /* scaling vector, for the variable cc */
sc); /* scaling vector for function values fval */
if (check_flag(&flag, "KINSol", 1)) return(1);
printf("\n\nComputed equilibrium species concentrations:\n");
PrintOutput(cc);
/* Print final statistics and free memory */
PrintFinalStats(kmem);
N_VDestroy_Serial(cc);
N_VDestroy_Serial(sc);
KINFree(&kmem);
FreeUserData(data);
return(0);
}
int main(void)
{
realtype dx, dy, reltol, abstol, t, tout, umax;
N_Vector u;
UserData data;
void *cvode_mem;
int iout, flag;
long int nst;
u = NULL;
data = NULL;
cvode_mem = NULL;
/* Create a serial vector */
u = N_VNew_Serial(NEQ); /* Allocate u vector */
if(check_flag((void*)u, "N_VNew_Serial", 0)) return(1);
reltol = ZERO; /* Set the tolerances */
abstol = ATOL;
data = (UserData) malloc(sizeof *data); /* Allocate data memory */
if(check_flag((void *)data, "malloc", 2)) return(1);
dx = data->dx = XMAX/(MX+1); /* Set grid coefficients in data */
dy = data->dy = YMAX/(MY+1);
data->hdcoef = ONE/(dx*dx);
data->hacoef = HALF/(TWO*dx);
data->vdcoef = ONE/(dy*dy);
SetIC(u, data); /* Initialize u vector */
/* Call CVodeCreate to create the solver memory and specify the
* Backward Differentiation Formula and the use of a Newton iteration */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
/* Call CVodeInit to initialize the integrator memory and specify the
* user's right hand side function in u'=f(t,u), the inital time T0, and
* the initial dependent variable vector u. */
flag = CVodeInit(cvode_mem, f, T0, u);
if(check_flag(&flag, "CVodeInit", 1)) return(1);
/* Call CVodeSStolerances to specify the scalar relative tolerance
* and scalar absolute tolerance */
flag = CVodeSStolerances(cvode_mem, reltol, abstol);
if (check_flag(&flag, "CVodeSStolerances", 1)) return(1);
/* Set the pointer to user-defined data */
flag = CVodeSetUserData(cvode_mem, data);
if(check_flag(&flag, "CVodeSetUserData", 1)) return(1);
/* Call CVLapackBand to specify the CVBAND band linear solver */
flag = CVLapackBand(cvode_mem, NEQ, MY, MY);
if(check_flag(&flag, "CVLapackBand", 1)) return(1);
/* Set the user-supplied Jacobian routine Jac */
flag = CVDlsSetBandJacFn(cvode_mem, Jac);
if(check_flag(&flag, "CVDlsSetBandJacFn", 1)) return(1);
/* In loop over output points: call CVode, print results, test for errors */
umax = N_VMaxNorm(u);
PrintHeader(reltol, abstol, umax);
for(iout=1, tout=T1; iout <= NOUT; iout++, tout += DTOUT) {
flag = CVode(cvode_mem, tout, u, &t, CV_NORMAL);
if(check_flag(&flag, "CVode", 1)) break;
umax = N_VMaxNorm(u);
flag = CVodeGetNumSteps(cvode_mem, &nst);
check_flag(&flag, "CVodeGetNumSteps", 1);
PrintOutput(t, umax, nst);
}
PrintFinalStats(cvode_mem); /* Print some final statistics */
N_VDestroy_Serial(u); /* Free the u vector */
CVodeFree(&cvode_mem); /* Free the integrator memory */
free(data); /* Free the user data */
return(0);
}
int main(int argc, char *argv[])
{
ProblemData d;
MPI_Comm comm;
int npes, npes_needed;
int myId;
long int neq, l_neq;
void *cvode_mem;
N_Vector y, q;
realtype abstol, reltol, abstolQ, reltolQ;
long int mudq, mldq, mukeep, mlkeep;
int indexB;
N_Vector yB, qB;
realtype abstolB, reltolB, abstolQB, reltolQB;
long int mudqB, mldqB, mukeepB, mlkeepB;
realtype tret, *qdata, G;
int ncheckpnt, flag;
booleantype output;
/* Initialize MPI and set Ids */
MPI_Init(&argc, &argv);
comm = MPI_COMM_WORLD;
MPI_Comm_rank(comm, &myId);
/* Check number of processes */
npes_needed = NPX * NPY;
#ifdef USE3D
npes_needed *= NPZ;
#endif
MPI_Comm_size(comm, &npes);
if (npes_needed != npes) {
if (myId == 0)
fprintf(stderr,"I need %d processes but I only got %d\n",
npes_needed, npes);
MPI_Abort(comm, EXIT_FAILURE);
}
/* Test if matlab output is requested */
if (argc > 1) output = TRUE;
else output = FALSE;
/* Allocate and set problem data structure */
d = (ProblemData) malloc(sizeof *d);
SetData(d, comm, npes, myId, &neq, &l_neq);
if (myId == 0) PrintHeader();
/*--------------------------
Forward integration phase
--------------------------*/
/* Allocate space for y and set it with the I.C. */
y = N_VNew_Parallel(comm, l_neq, neq);
N_VConst(ZERO, y);
/* Allocate and initialize qB (local contribution to cost) */
q = N_VNew_Parallel(comm, 1, npes);
N_VConst(ZERO, q);
/* Create CVODES object, attach user data, and allocate space */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
flag = CVodeSetUserData(cvode_mem, d);
flag = CVodeInit(cvode_mem, f, ti, y);
abstol = ATOL;
reltol = RTOL;
flag = CVodeSStolerances(cvode_mem, reltol, abstol);
/* attach linear solver */
flag = CVSpgmr(cvode_mem, PREC_LEFT, 0);
/* Attach preconditioner and linear solver modules */
mudq = mldq = d->l_m[0]+1;
mukeep = mlkeep = 2;
flag = CVBBDPrecInit(cvode_mem, l_neq, mudq, mldq,
mukeep, mlkeep, ZERO,
f_local, NULL);
/* Initialize quadrature calculations */
abstolQ = ATOL_Q;
reltolQ = RTOL_Q;
flag = CVodeQuadInit(cvode_mem, fQ, q);
flag = CVodeQuadSStolerances(cvode_mem, reltolQ, abstolQ);
flag = CVodeSetQuadErrCon(cvode_mem, TRUE);
/* Allocate space for the adjoint calculation */
flag = CVodeAdjInit(cvode_mem, STEPS, CV_HERMITE);
/* Integrate forward in time while storing check points */
if (myId == 0) printf("Begin forward integration... ");
flag = CVodeF(cvode_mem, tf, y, &tret, CV_NORMAL, &ncheckpnt);
if (myId == 0) printf("done. ");
/* Extract quadratures */
flag = CVodeGetQuad(cvode_mem, &tret, q);
qdata = NV_DATA_P(q);
MPI_Allreduce(&qdata[0], &G, 1, PVEC_REAL_MPI_TYPE, MPI_SUM, comm);
#if defined(SUNDIALS_EXTENDED_PRECISION)
if (myId == 0) printf(" G = %Le\n",G);
#elif defined(SUNDIALS_DOUBLE_PRECISION)
if (myId == 0) printf(" G = %e\n",G);
#else
if (myId == 0) printf(" G = %e\n",G);
#endif
/* Print statistics for forward run */
if (myId == 0) PrintFinalStats(cvode_mem);
/*--------------------------
Backward integration phase
--------------------------*/
/* Allocate and initialize yB */
yB = N_VNew_Parallel(comm, l_neq, neq);
N_VConst(ZERO, yB);
/* Allocate and initialize qB (gradient) */
qB = N_VNew_Parallel(comm, l_neq, neq);
N_VConst(ZERO, qB);
/* Create and allocate backward CVODE memory */
flag = CVodeCreateB(cvode_mem, CV_BDF, CV_NEWTON, &indexB);
flag = CVodeSetUserDataB(cvode_mem, indexB, d);
flag = CVodeInitB(cvode_mem, indexB, fB, tf, yB);
abstolB = ATOL_B;
reltolB = RTOL_B;
flag = CVodeSStolerancesB(cvode_mem, indexB, reltolB, abstolB);
/* Attach preconditioner and linear solver modules */
flag = CVSpgmrB(cvode_mem, indexB, PREC_LEFT, 0);
mudqB = mldqB = d->l_m[0]+1;
mukeepB = mlkeepB = 2;
flag = CVBBDPrecInitB(cvode_mem, indexB, l_neq, mudqB, mldqB,
mukeepB, mlkeepB, ZERO, fB_local, NULL);
/* Initialize quadrature calculations */
abstolQB = ATOL_QB;
reltolQB = RTOL_QB;
flag = CVodeQuadInitB(cvode_mem, indexB, fQB, qB);
flag = CVodeQuadSStolerancesB(cvode_mem, indexB, reltolQB, abstolQB);
flag = CVodeSetQuadErrConB(cvode_mem, indexB, TRUE);
/* Integrate backwards */
if (myId == 0) printf("Begin backward integration... ");
flag = CVodeB(cvode_mem, ti, CV_NORMAL);
if (myId == 0) printf("done.\n");
/* Extract solution */
flag = CVodeGetB(cvode_mem, indexB, &tret, yB);
/* Extract quadratures */
flag = CVodeGetQuadB(cvode_mem, indexB, &tret, qB);
/* Print statistics for backward run */
if (myId == 0) {
PrintFinalStats(CVodeGetAdjCVodeBmem(cvode_mem, indexB));
}
/* Process 0 collects the gradient components and prints them */
if (output) {
OutputGradient(myId, qB, d);
if (myId == 0) printf("Wrote matlab file 'grad.m'.\n");
}
/* Free memory */
N_VDestroy_Parallel(y);
N_VDestroy_Parallel(q);
N_VDestroy_Parallel(qB);
N_VDestroy_Parallel(yB);
CVodeFree(&cvode_mem);
MPI_Finalize();
return(0);
}
int main(int narg, char **args)
{
realtype reltol, t, tout;
N_Vector state, abstol;
void *cvode_mem;
int flag, flagr;
int rootsfound[NRF];
int rootdir[] = {1,};
FILE *pout;
if(!(pout = fopen("results/iaf_v.dat", "w"))){
fprintf(stderr, "Cannot open file results/iaf_v.dat. Are you trying to write to a non-existent directory? Exiting...\n");
exit(1);
}
state = abstol = NULL;
cvode_mem = NULL;
state = N_VNew_Serial(NEQ);
if (check_flag((void *)state, "N_VNew_Serial", 0)) return(1);
abstol = N_VNew_Serial(NEQ);
if (check_flag((void *)abstol, "N_VNew_Serial", 0)) return(1);
realtype reset = -0.07;
realtype C = 3.2e-12;
realtype thresh = -0.055;
realtype gleak = 2e-10;
realtype eleak = -0.053;
realtype p[] = {reset, C, thresh, gleak, eleak, };
realtype v = reset;
NV_Ith_S(state, 0) = reset;
reltol = RTOL;
NV_Ith_S(abstol,0) = ATOL0;
/* Allocations and initializations */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if (check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
flag = CVodeInit(cvode_mem, dstate_dt, T0, state);
if (check_flag(&flag, "CVodeInit", 1)) return(1);
flag = CVodeSetUserData(cvode_mem, p);
if (check_flag(&flag, "CVodeSetUserData", 1)) return(1);
flag = CVodeSVtolerances(cvode_mem, reltol, abstol);
if (check_flag(&flag, "CVodeSVtolerances", 1)) return(1);
flag = CVodeRootInit(cvode_mem, NRF, root_functions);
if (check_flag(&flag, "CVodeRootInit", 1)) return(1);
CVodeSetRootDirection(cvode_mem, rootdir);
if (check_flag(&flag, "CVodeSetRootDirection", 1)) return(1);
flag = CVDense(cvode_mem, NEQ);
if (check_flag(&flag, "CVDense", 1)) return(1);
printf(" \n Integrating iaf \n\n");
printf("#t v, \n");
PrintOutput(pout, t, state);
tout = DT;
while(1) {
flag = CVode(cvode_mem, tout, state, &t, CV_NORMAL);
if(flag == CV_ROOT_RETURN) {
/* Event detected */
flagr = CVodeGetRootInfo(cvode_mem, rootsfound);
if (check_flag(&flagr, "CVodeGetRootInfo", 1)) return(1);
PrintRootInfo(t, state, rootsfound);
if(rootsfound[0]){
//condition_0
v = NV_Ith_S(state, 0);
NV_Ith_S(state, 0) = reset;
}
/* Restart integration with event-corrected state */
flag = CVodeSetUserData(cvode_mem, p);
if (check_flag(&flag, "CVodeSetUserData", 1)) return(1);
CVodeReInit(cvode_mem, t, state);
//PrintRootInfo(t, state, rootsfound);
}
else
{
PrintOutput(pout, t, state);
if(check_flag(&flag, "CVode", 1)) break;
if(flag == CV_SUCCESS) {
tout += DT;
}
if (t >= T1) break;
}
}
PrintFinalStats(cvode_mem);
N_VDestroy_Serial(state);
N_VDestroy_Serial(abstol);
CVodeFree(&cvode_mem);
fclose(pout);
return(0);
}
int main(int argc, char *argv[])
{
MPI_Comm comm;
void *mem;
UserData webdata;
long int SystemSize, local_N, mudq, mldq, mukeep, mlkeep;
realtype rtol, atol, t0, tout, tret;
N_Vector cc, cp, res, id;
int thispe, npes, maxl, iout, retval;
cc = cp = res = id = NULL;
webdata = NULL;
mem = NULL;
/* Set communicator, and get processor number and total number of PE's. */
MPI_Init(&argc, &argv);
comm = MPI_COMM_WORLD;
MPI_Comm_rank(comm, &thispe);
MPI_Comm_size(comm, &npes);
if (npes != NPEX*NPEY) {
if (thispe == 0)
fprintf(stderr,
"\nMPI_ERROR(0): npes = %d not equal to NPEX*NPEY = %d\n",
npes, NPEX*NPEY);
MPI_Finalize();
return(1);
}
/* Set local length (local_N) and global length (SystemSize). */
local_N = MXSUB*MYSUB*NUM_SPECIES;
SystemSize = NEQ;
/* Set up user data block webdata. */
webdata = (UserData) malloc(sizeof *webdata);
webdata->rates = N_VNew_Parallel(comm, local_N, SystemSize);
webdata->acoef = newDenseMat(NUM_SPECIES, NUM_SPECIES);
InitUserData(webdata, thispe, npes, comm);
/* Create needed vectors, and load initial values.
The vector res is used temporarily only. */
cc = N_VNew_Parallel(comm, local_N, SystemSize);
if(check_flag((void *)cc, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
cp = N_VNew_Parallel(comm, local_N, SystemSize);
if(check_flag((void *)cp, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
res = N_VNew_Parallel(comm, local_N, SystemSize);
if(check_flag((void *)res, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
id = N_VNew_Parallel(comm, local_N, SystemSize);
if(check_flag((void *)id, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
SetInitialProfiles(cc, cp, id, res, webdata);
N_VDestroy_Parallel(res);
/* Set remaining inputs to IDAMalloc. */
t0 = ZERO;
rtol = RTOL;
atol = ATOL;
/* Call IDACreate and IDAMalloc to initialize solution */
mem = IDACreate();
if(check_flag((void *)mem, "IDACreate", 0, thispe)) MPI_Abort(comm, 1);
retval = IDASetUserData(mem, webdata);
if(check_flag(&retval, "IDASetUserData", 1, thispe)) MPI_Abort(comm, 1);
retval = IDASetId(mem, id);
if(check_flag(&retval, "IDASetId", 1, thispe)) MPI_Abort(comm, 1);
retval = IDAInit(mem, resweb, t0, cc, cp);
if(check_flag(&retval, "IDAInit", 1, thispe)) MPI_Abort(comm, 1);
retval = IDASStolerances(mem, rtol, atol);
if(check_flag(&retval, "IDASStolerances", 1, thispe)) MPI_Abort(comm, 1);
/* Call IDASpgmr to specify the IDA linear solver IDASPGMR */
maxl = 16;
retval = IDASpgmr(mem, maxl);
if(check_flag(&retval, "IDASpgmr", 1, thispe)) MPI_Abort(comm, 1);
/* Call IDABBDPrecInit to initialize the band-block-diagonal preconditioner.
The half-bandwidths for the difference quotient evaluation are exact
for the system Jacobian, but only a 5-diagonal band matrix is retained. */
mudq = mldq = NSMXSUB;
mukeep = mlkeep = 2;
retval = IDABBDPrecInit(mem, local_N, mudq, mldq, mukeep, mlkeep,
ZERO, reslocal, NULL);
if(check_flag(&retval, "IDABBDPrecInit", 1, thispe)) MPI_Abort(comm, 1);
/* Call IDACalcIC (with default options) to correct the initial values. */
tout = RCONST(0.001);
retval = IDACalcIC(mem, IDA_YA_YDP_INIT, tout);
if(check_flag(&retval, "IDACalcIC", 1, thispe)) MPI_Abort(comm, 1);
/* On PE 0, print heading, basic parameters, initial values. */
if (thispe == 0) PrintHeader(SystemSize, maxl,
mudq, mldq, mukeep, mlkeep,
rtol, atol);
PrintOutput(mem, cc, t0, webdata, comm);
/* Call IDA in tout loop, normal mode, and print selected output. */
for (iout = 1; iout <= NOUT; iout++) {
retval = IDASolve(mem, tout, &tret, cc, cp, IDA_NORMAL);
if(check_flag(&retval, "IDASolve", 1, thispe)) MPI_Abort(comm, 1);
PrintOutput(mem, cc, tret, webdata, comm);
if (iout < 3) tout *= TMULT;
else tout += TADD;
}
/* On PE 0, print final set of statistics. */
if (thispe == 0) PrintFinalStats(mem);
/* Free memory. */
N_VDestroy_Parallel(cc);
N_VDestroy_Parallel(cp);
N_VDestroy_Parallel(id);
IDAFree(&mem);
destroyMat(webdata->acoef);
N_VDestroy_Parallel(webdata->rates);
free(webdata);
MPI_Finalize();
return(0);
}
int main()
{
realtype abstol, reltol, t, tout;
N_Vector u;
UserData data;
void *cvode_mem;
int flag, iout, jpre;
long int ml, mu;
u = NULL;
data = NULL;
cvode_mem = NULL;
/* Allocate and initialize u, and set problem data and tolerances */
u = N_VNew_Serial(NEQ);
if(check_flag((void *)u, "N_VNew_Serial", 0)) return(1);
data = (UserData) malloc(sizeof *data);
if(check_flag((void *)data, "malloc", 2)) return(1);
InitUserData(data);
SetInitialProfiles(u, data->dx, data->dy);
abstol = ATOL;
reltol = RTOL;
/* Call CVodeCreate to create the solver memory and specify the
* Backward Differentiation Formula and the use of a Newton iteration */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
/* Set the pointer to user-defined data */
flag = CVodeSetUserData(cvode_mem, data);
if(check_flag(&flag, "CVodeSetUserData", 1)) return(1);
/* Call CVodeInit to initialize the integrator memory and specify the
* user's right hand side function in u'=f(t,u), the inital time T0, and
* the initial dependent variable vector u. */
flag = CVodeInit(cvode_mem, f, T0, u);
if(check_flag(&flag, "CVodeInit", 1)) return(1);
/* Call CVodeSStolerances to specify the scalar relative tolerance
* and scalar absolute tolerances */
flag = CVodeSStolerances(cvode_mem, reltol, abstol);
if (check_flag(&flag, "CVodeSStolerances", 1)) return(1);
/* Call CVSpgmr to specify the linear solver CVSPGMR
with left preconditioning and the maximum Krylov dimension maxl */
flag = CVSpgmr(cvode_mem, PREC_LEFT, 0);
if(check_flag(&flag, "CVSpgmr", 1)) return(1);
/* Call CVBandPreInit to initialize band preconditioner */
ml = mu = 2;
flag = CVBandPrecInit(cvode_mem, NEQ, mu, ml);
if(check_flag(&flag, "CVBandPrecInit", 0)) return(1);
PrintIntro(mu, ml);
/* Loop over jpre (= PREC_LEFT, PREC_RIGHT), and solve the problem */
for (jpre = PREC_LEFT; jpre <= PREC_RIGHT; jpre++) {
/* On second run, re-initialize u, the solver, and CVSPGMR */
if (jpre == PREC_RIGHT) {
SetInitialProfiles(u, data->dx, data->dy);
flag = CVodeReInit(cvode_mem, T0, u);
if(check_flag(&flag, "CVodeReInit", 1)) return(1);
flag = CVSpilsSetPrecType(cvode_mem, PREC_RIGHT);
check_flag(&flag, "CVSpilsSetPrecType", 1);
printf("\n\n-------------------------------------------------------");
printf("------------\n");
}
printf("\n\nPreconditioner type is: jpre = %s\n\n",
(jpre == PREC_LEFT) ? "PREC_LEFT" : "PREC_RIGHT");
/* In loop over output points, call CVode, print results, test for error */
for (iout = 1, tout = TWOHR; iout <= NOUT; iout++, tout += TWOHR) {
flag = CVode(cvode_mem, tout, u, &t, CV_NORMAL);
check_flag(&flag, "CVode", 1);
PrintOutput(cvode_mem, u, t);
if (flag != CV_SUCCESS) {
break;
}
}
/* Print final statistics */
PrintFinalStats(cvode_mem);
} /* End of jpre loop */
/* Free memory */
N_VDestroy_Serial(u);
free(data);
CVodeFree(&cvode_mem);
return(0);
}
int main(int argc, char *argv[])
{
realtype dx, reltol, abstol, t, tout, umax;
N_Vector u;
UserData data;
void *cvode_mem;
int iout, retval, my_pe, npes;
sunindextype local_N, nperpe, nrem, my_base;
long int nst;
MPI_Comm comm;
u = NULL;
data = NULL;
cvode_mem = NULL;
/* Get processor number, total number of pe's, and my_pe. */
MPI_Init(&argc, &argv);
comm = MPI_COMM_WORLD;
MPI_Comm_size(comm, &npes);
MPI_Comm_rank(comm, &my_pe);
/* Set local vector length. */
nperpe = NEQ/npes;
nrem = NEQ - npes*nperpe;
local_N = (my_pe < nrem) ? nperpe+1 : nperpe;
my_base = (my_pe < nrem) ? my_pe*local_N : my_pe*nperpe + nrem;
data = (UserData) malloc(sizeof *data); /* Allocate data memory */
if(check_retval((void *)data, "malloc", 2, my_pe)) MPI_Abort(comm, 1);
data->comm = comm;
data->npes = npes;
data->my_pe = my_pe;
u = N_VNew_Parallel(comm, local_N, NEQ); /* Allocate u vector */
if(check_retval((void *)u, "N_VNew", 0, my_pe)) MPI_Abort(comm, 1);
reltol = ZERO; /* Set the tolerances */
abstol = ATOL;
dx = data->dx = XMAX/((realtype)(MX+1)); /* Set grid coefficients in data */
data->hdcoef = RCONST(1.0)/(dx*dx);
data->hacoef = RCONST(0.5)/(RCONST(2.0)*dx);
SetIC(u, dx, local_N, my_base); /* Initialize u vector */
/* Call CVodeCreate to create the solver memory and specify the
* Adams-Moulton LMM */
cvode_mem = CVodeCreate(CV_ADAMS);
if(check_retval((void *)cvode_mem, "CVodeCreate", 0, my_pe)) MPI_Abort(comm, 1);
retval = CVodeSetUserData(cvode_mem, data);
if(check_retval(&retval, "CVodeSetUserData", 1, my_pe)) MPI_Abort(comm, 1);
/* Call CVodeInit to initialize the integrator memory and specify the
* user's right hand side function in u'=f(t,u), the inital time T0, and
* the initial dependent variable vector u. */
retval = CVodeInit(cvode_mem, f, T0, u);
if(check_retval(&retval, "CVodeInit", 1, my_pe)) return(1);
/* Call CVodeSStolerances to specify the scalar relative tolerance
* and scalar absolute tolerances */
retval = CVodeSStolerances(cvode_mem, reltol, abstol);
if (check_retval(&retval, "CVodeSStolerances", 1, my_pe)) return(1);
/* Call CVDiag to create and attach CVODE-specific diagonal linear solver */
retval = CVDiag(cvode_mem);
if(check_retval(&retval, "CVDiag", 1, my_pe)) return(1);
if (my_pe == 0) PrintIntro(npes);
umax = N_VMaxNorm(u);
if (my_pe == 0) {
t = T0;
PrintData(t, umax, 0);
}
/* In loop over output points, call CVode, print results, test for error */
for (iout=1, tout=T1; iout <= NOUT; iout++, tout += DTOUT) {
retval = CVode(cvode_mem, tout, u, &t, CV_NORMAL);
if(check_retval(&retval, "CVode", 1, my_pe)) break;
umax = N_VMaxNorm(u);
retval = CVodeGetNumSteps(cvode_mem, &nst);
check_retval(&retval, "CVodeGetNumSteps", 1, my_pe);
if (my_pe == 0) PrintData(t, umax, nst);
}
if (my_pe == 0)
PrintFinalStats(cvode_mem); /* Print some final statistics */
N_VDestroy_Parallel(u); /* Free the u vector */
CVodeFree(&cvode_mem); /* Free the integrator memory */
free(data); /* Free user data */
MPI_Finalize();
return(0);
}
static int Problem2(void)
{
realtype reltol=RTOL, abstol=ATOL, t, tout, er, erm, ero;
int miter, flag, temp_flag, nerr=0;
N_Vector y;
void *cvode_mem;
booleantype firstrun;
int qu, iout;
realtype hu;
y = NULL;
cvode_mem = NULL;
y = N_VNew_Serial(P2_NEQ);
if(check_flag((void *)y, "N_VNew", 0)) return(1);
PrintIntro2();
cvode_mem = CVodeCreate(CV_ADAMS, CV_FUNCTIONAL);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
for (miter=FUNC; miter <= BAND_DQ; miter++) {
if ((miter==DENSE_USER) || (miter==DENSE_DQ)) continue;
ero = ZERO;
N_VConst(ZERO, y);
NV_Ith_S(y,0) = ONE;
firstrun = (miter==FUNC);
if (firstrun) {
flag = CVodeMalloc(cvode_mem, f2, P2_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeMalloc", 1)) return(1);
} else {
flag = CVodeSetIterType(cvode_mem, CV_NEWTON);
if(check_flag(&flag, "CVodeSetIterType", 1)) ++nerr;
flag = CVodeReInit(cvode_mem, f2, P2_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeReInit", 1)) return(1);
}
flag = PrepareNextRun(cvode_mem, CV_ADAMS, miter, P2_MU, P2_ML);
if(check_flag(&flag, "PrepareNextRun", 1)) return(1);
PrintHeader2();
for(iout=1, tout=P2_T1; iout <= P2_NOUT; iout++, tout*=P2_TOUT_MULT) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
check_flag(&flag, "CVode", 1);
erm = MaxError(y, t);
temp_flag = CVodeGetLastOrder(cvode_mem, &qu);
if(check_flag(&temp_flag, "CVodeGetLastOrder", 1)) ++nerr;
temp_flag = CVodeGetLastStep(cvode_mem, &hu);
if(check_flag(&temp_flag, "CVodeGetLastStep", 1)) ++nerr;
PrintOutput2(t, erm, qu, hu);
if (flag != CV_SUCCESS) {
nerr++;
break;
}
er = erm / abstol;
if (er > ero) ero = er;
if (er > P2_TOL_FACTOR) {
nerr++;
PrintErrOutput(P2_TOL_FACTOR);
}
}
PrintFinalStats(cvode_mem, miter, ero);
}
CVodeFree(cvode_mem);
cvode_mem = CVodeCreate(CV_BDF, CV_FUNCTIONAL);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
for (miter=FUNC; miter <= BAND_DQ; miter++) {
if ((miter==DENSE_USER) || (miter==DENSE_DQ)) continue;
ero = ZERO;
N_VConst(ZERO, y);
NV_Ith_S(y,0) = ONE;
firstrun = (miter==FUNC);
if (firstrun) {
flag = CVodeMalloc(cvode_mem, f2, P2_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeMalloc", 1)) return(1);
} else {
flag = CVodeSetIterType(cvode_mem, CV_NEWTON);
if(check_flag(&flag, "CVodeSetIterType", 1)) ++nerr;
flag = CVodeReInit(cvode_mem, f2, P2_T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeReInit", 1)) return(1);
}
flag = PrepareNextRun(cvode_mem, CV_BDF, miter, P2_MU, P2_ML);
if(check_flag(&flag, "PrepareNextRun", 1)) return(1);
PrintHeader2();
for(iout=1, tout=P2_T1; iout <= P2_NOUT; iout++, tout*=P2_TOUT_MULT) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
check_flag(&flag, "CVode", 1);
erm = MaxError(y, t);
temp_flag = CVodeGetLastOrder(cvode_mem, &qu);
if(check_flag(&temp_flag, "CVodeGetLastOrder", 1)) ++nerr;
temp_flag = CVodeGetLastStep(cvode_mem, &hu);
if(check_flag(&temp_flag, "CVodeGetLastStep", 1)) ++nerr;
PrintOutput2(t, erm, qu, hu);
if (flag != CV_SUCCESS) {
nerr++;
break;
}
er = erm / abstol;
if (er > ero) ero = er;
if (er > P2_TOL_FACTOR) {
nerr++;
PrintErrOutput(P2_TOL_FACTOR);
}
}
PrintFinalStats(cvode_mem, miter, ero);
}
CVodeFree(cvode_mem);
N_VDestroy_Serial(y);
return(nerr);
}
int main()
{
realtype abstol, reltol, t, tout;
N_Vector u;
UserData data;
void *cvode_mem;
int iout, flag;
u = NULL;
data = NULL;
cvode_mem = NULL;
/* Allocate memory, and set problem data, initial values, tolerances */
u = N_VNew_Serial(NEQ);
if(check_flag((void *)u, "N_VNew_Serial", 0)) return(1);
data = AllocUserData();
if(check_flag((void *)data, "AllocUserData", 2)) return(1);
InitUserData(data);
SetInitialProfiles(u, data->dx, data->dy);
abstol=ATOL;
reltol=RTOL;
/* Call CvodeCreate to create the solver memory
CV_BDF specifies the Backward Differentiation Formula
CV_NEWTON specifies a Newton iteration
A pointer to the integrator memory is returned and stored in cvode_mem. */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
/* Set the pointer to user-defined data */
flag = CVodeSetFdata(cvode_mem, data);
if(check_flag(&flag, "CVodeSetFdata", 1)) return(1);
/* Call CVodeMalloc to initialize the integrator memory:
f is the user's right hand side function in u'=f(t,u)
T0 is the initial time
u is the initial dependent variable vector
CV_SS specifies scalar relative and absolute tolerances
reltol is the relative tolerance
&abstol is a pointer to the scalar absolute tolerance */
flag = CVodeMalloc(cvode_mem, f, T0, u, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeMalloc", 1)) return(1);
/* Call CVSpgmr to specify the linear solver CVSPGMR
with left preconditioning and the maximum Krylov dimension maxl */
flag = CVSpgmr(cvode_mem, PREC_LEFT, 0);
if(check_flag(&flag, "CVSpgmr", 1)) return(1);
/* Set modified Gram-Schmidt orthogonalization, preconditioner
setup and solve routines Precond and PSolve, and the pointer
to the user-defined block data */
flag = CVSpgmrSetGSType(cvode_mem, MODIFIED_GS);
if(check_flag(&flag, "CVSpgmrSetGSType", 1)) return(1);
flag = CVSpgmrSetPreconditioner(cvode_mem, Precond, PSolve, data);
if(check_flag(&flag, "CVSpgmrSetPreconditioner", 1)) return(1);
/* In loop over output points, call CVode, print results, test for error */
printf(" \n2-species diurnal advection-diffusion problem\n\n");
for (iout=1, tout = TWOHR; iout <= NOUT; iout++, tout += TWOHR) {
flag = CVode(cvode_mem, tout, u, &t, CV_NORMAL);
PrintOutput(cvode_mem, u, t);
if(check_flag(&flag, "CVode", 1)) break;
}
PrintFinalStats(cvode_mem);
/* Free memory */
N_VDestroy_Serial(u);
FreeUserData(data);
CVodeFree(cvode_mem);
return(0);
}
int main(int argc, char *argv[])
{
void *cvode_mem;
UserData data;
realtype t, tout;
N_Vector y;
int iout, flag, nthreads, nnz;
realtype pbar[NS];
int is;
N_Vector *yS;
booleantype sensi, err_con;
int sensi_meth;
cvode_mem = NULL;
data = NULL;
y = NULL;
yS = NULL;
/* Process arguments */
ProcessArgs(argc, argv, &sensi, &sensi_meth, &err_con);
/* User data structure */
data = (UserData) malloc(sizeof *data);
if (check_flag((void *)data, "malloc", 2)) return(1);
data->p[0] = RCONST(0.04);
data->p[1] = RCONST(1.0e4);
data->p[2] = RCONST(3.0e7);
/* Initial conditions */
y = N_VNew_Serial(NEQ);
if (check_flag((void *)y, "N_VNew_Serial", 0)) return(1);
Ith(y,1) = Y1;
Ith(y,2) = Y2;
Ith(y,3) = Y3;
/* Call CVodeCreate to create the solver memory and specify the
Backward Differentiation Formula and the use of a Newton iteration */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if (check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
/* Call CVodeInit to initialize the integrator memory and specify the
user's right hand side function in y'=f(t,y), the initial time T0, and
the initial dependent variable vector y. */
flag = CVodeInit(cvode_mem, f, T0, y);
if (check_flag(&flag, "CVodeInit", 1)) return(1);
/* Call CVodeWFtolerances to specify a user-supplied function ewt that sets
the multiplicative error weights W_i for use in the weighted RMS norm */
flag = CVodeWFtolerances(cvode_mem, ewt);
if (check_flag(&flag, "CVodeSetEwtFn", 1)) return(1);
/* Attach user data */
flag = CVodeSetUserData(cvode_mem, data);
if (check_flag(&flag, "CVodeSetUserData", 1)) return(1);
/* Call CVKLU to specify the CVKLU sparse direct linear solver */
nthreads = 1; /* no. of threads to use when factoring the system*/
nnz = NEQ * NEQ; /* max no. of nonzeros entries in the Jac */
flag = CVSuperLUMT(cvode_mem, nthreads, NEQ, nnz);
if (check_flag(&flag, "CVSuperLUMT", 1)) return(1);
/* Set the Jacobian routine to Jac (user-supplied) */
flag = CVSlsSetSparseJacFn(cvode_mem, Jac);
if (check_flag(&flag, "CVSlsSetSparseJacFn", 1)) return(1);
printf("\n3-species chemical kinetics problem\n");
/* Sensitivity-related settings */
if (sensi) {
/* Set parameter scaling factor */
pbar[0] = data->p[0];
pbar[1] = data->p[1];
pbar[2] = data->p[2];
/* Set sensitivity initial conditions */
yS = N_VCloneVectorArray_Serial(NS, y);
if (check_flag((void *)yS, "N_VCloneVectorArray_Serial", 0)) return(1);
for (is=0;is<NS;is++) N_VConst(ZERO, yS[is]);
/* Call CVodeSensInit1 to activate forward sensitivity computations
and allocate internal memory for COVEDS related to sensitivity
calculations. Computes the right-hand sides of the sensitivity
ODE, one at a time */
flag = CVodeSensInit1(cvode_mem, NS, sensi_meth, fS, yS);
if(check_flag(&flag, "CVodeSensInit", 1)) return(1);
/* Call CVodeSensEEtolerances to estimate tolerances for sensitivity
variables based on the rolerances supplied for states variables and
the scaling factor pbar */
flag = CVodeSensEEtolerances(cvode_mem);
if(check_flag(&flag, "CVodeSensEEtolerances", 1)) return(1);
/* Set sensitivity analysis optional inputs */
/* Call CVodeSetSensErrCon to specify the error control strategy for
sensitivity variables */
flag = CVodeSetSensErrCon(cvode_mem, err_con);
if (check_flag(&flag, "CVodeSetSensErrCon", 1)) return(1);
/* Call CVodeSetSensParams to specify problem parameter information for
sensitivity calculations */
flag = CVodeSetSensParams(cvode_mem, NULL, pbar, NULL);
if (check_flag(&flag, "CVodeSetSensParams", 1)) return(1);
printf("Sensitivity: YES ");
if(sensi_meth == CV_SIMULTANEOUS)
printf("( SIMULTANEOUS +");
else
if(sensi_meth == CV_STAGGERED) printf("( STAGGERED +");
else printf("( STAGGERED1 +");
if(err_con) printf(" FULL ERROR CONTROL )");
else printf(" PARTIAL ERROR CONTROL )");
} else {
printf("Sensitivity: NO ");
}
/* In loop over output points, call CVode, print results, test for error */
printf("\n\n");
printf("===========================================");
printf("============================\n");
printf(" T Q H NST y1");
printf(" y2 y3 \n");
printf("===========================================");
printf("============================\n");
for (iout=1, tout=T1; iout <= NOUT; iout++, tout *= TMULT) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
if (check_flag(&flag, "CVode", 1)) break;
PrintOutput(cvode_mem, t, y);
/* Call CVodeGetSens to get the sensitivity solution vector after a
successful return from CVode */
if (sensi) {
flag = CVodeGetSens(cvode_mem, &t, yS);
if (check_flag(&flag, "CVodeGetSens", 1)) break;
PrintOutputS(yS);
}
printf("-----------------------------------------");
printf("------------------------------\n");
}
/* Print final statistics */
PrintFinalStats(cvode_mem, sensi);
/* Free memory */
N_VDestroy_Serial(y); /* Free y vector */
if (sensi) {
N_VDestroyVectorArray_Serial(yS, NS); /* Free yS vector */
}
free(data); /* Free user data */
CVodeFree(&cvode_mem); /* Free CVODES memory */
return(0);
}
int main(int argc, char *argv[])
{
void *cvode_mem;
UserData data;
realtype t, tout;
N_Vector y;
int iout, flag;
realtype pbar[NS];
int is;
N_Vector *yS;
booleantype sensi, err_con;
int sensi_meth;
cvode_mem = NULL;
data = NULL;
y = NULL;
yS = NULL;
/* Process arguments */
ProcessArgs(argc, argv, &sensi, &sensi_meth, &err_con);
/* User data structure */
data = (UserData) malloc(sizeof *data);
if (check_flag((void *)data, "malloc", 2)) return(1);
data->p[0] = RCONST(0.04);
data->p[1] = RCONST(1.0e4);
data->p[2] = RCONST(3.0e7);
/* Initial conditions */
y = N_VNew_Serial(NEQ);
if (check_flag((void *)y, "N_VNew_Serial", 0)) return(1);
Ith(y,1) = Y1;
Ith(y,2) = Y2;
Ith(y,3) = Y3;
/* Create CVODES object */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if (check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
/* Allocate space for CVODES */
flag = CVodeMalloc(cvode_mem, f, T0, y, CV_WF, 0.0, NULL);
if (check_flag(&flag, "CVodeMalloc", 1)) return(1);
/* Use private function to compute error weights */
flag = CVodeSetEwtFn(cvode_mem, ewt, NULL);
if (check_flag(&flag, "CVodeSetEwtFn", 1)) return(1);
/* Attach user data */
flag = CVodeSetFdata(cvode_mem, data);
if (check_flag(&flag, "CVodeSetFdata", 1)) return(1);
/* Attach linear solver */
flag = CVDense(cvode_mem, NEQ);
if (check_flag(&flag, "CVDense", 1)) return(1);
flag = CVDenseSetJacFn(cvode_mem, Jac, data);
if (check_flag(&flag, "CVDenseSetJacFn", 1)) return(1);
printf("\n3-species chemical kinetics problem\n");
/* Sensitivity-related settings */
if (sensi) {
pbar[0] = data->p[0];
pbar[1] = data->p[1];
pbar[2] = data->p[2];
yS = N_VNewVectorArray_Serial(NS, NEQ);
if (check_flag((void *)yS, "N_VNewVectorArray_Serial", 0)) return(1);
for (is=0;is<NS;is++) N_VConst(ZERO, yS[is]);
flag = CVodeSensMalloc(cvode_mem, NS, sensi_meth, yS);
if(check_flag(&flag, "CVodeSensMalloc", 1)) return(1);
flag = CVodeSetSensRhs1Fn(cvode_mem, fS);
if (check_flag(&flag, "CVodeSetSensRhs1Fn", 1)) return(1);
flag = CVodeSetSensErrCon(cvode_mem, err_con);
if (check_flag(&flag, "CVodeSetSensFdata", 1)) return(1);
flag = CVodeSetSensFdata(cvode_mem, data);
if (check_flag(&flag, "CVodeSetSensFdata", 1)) return(1);
flag = CVodeSetSensParams(cvode_mem, NULL, pbar, NULL);
if (check_flag(&flag, "CVodeSetSensParams", 1)) return(1);
printf("Sensitivity: YES ");
if(sensi_meth == CV_SIMULTANEOUS)
printf("( SIMULTANEOUS +");
else
if(sensi_meth == CV_STAGGERED) printf("( STAGGERED +");
else printf("( STAGGERED1 +");
if(err_con) printf(" FULL ERROR CONTROL )");
else printf(" PARTIAL ERROR CONTROL )");
} else {
printf("Sensitivity: NO ");
}
/* In loop over output points, call CVode, print results, test for error */
printf("\n\n");
printf("===================================================");
printf("============================\n");
printf(" T Q H NST y1");
printf(" y2 y3 \n");
printf("===================================================");
printf("============================\n");
for (iout=1, tout=T1; iout <= NOUT; iout++, tout *= TMULT) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
if (check_flag(&flag, "CVode", 1)) break;
PrintOutput(cvode_mem, t, y);
if (sensi) {
flag = CVodeGetSens(cvode_mem, t, yS);
if (check_flag(&flag, "CVodeGetSens", 1)) break;
PrintOutputS(yS);
}
printf("-------------------------------------------------");
printf("------------------------------\n");
}
/* Print final statistics */
PrintFinalStats(cvode_mem, sensi);
/* Free memory */
N_VDestroy_Serial(y); /* Free y vector */
if (sensi) {
N_VDestroyVectorArray_Serial(yS, NS); /* Free yS vector */
}
free(data); /* Free user data */
CVodeFree(cvode_mem); /* Free CVODES memory */
return(0);
}
int main(int argc, char *argv[])
{
void *cvode_mem;
UserData data;
realtype abstol, reltol, t, tout;
N_Vector y;
int iout, flag;
realtype *pbar;
int is, *plist;
N_Vector *uS;
booleantype sensi, err_con;
int sensi_meth;
pbar = NULL;
plist = NULL;
uS = NULL;
y = NULL;
data = NULL;
cvode_mem = NULL;
/* Process arguments */
ProcessArgs(argc, argv, &sensi, &sensi_meth, &err_con);
/* Problem parameters */
data = AllocUserData();
if(check_flag((void *)data, "AllocUserData", 2)) return(1);
InitUserData(data);
/* Initial states */
y = N_VNew_Serial(NEQ);
if(check_flag((void *)y, "N_VNew_Serial", 0)) return(1);
SetInitialProfiles(y, data->dx, data->dz);
/* Tolerances */
abstol=ATOL;
reltol=RTOL;
/* Create CVODES object */
cvode_mem = CVodeCreate(CV_BDF, CV_NEWTON);
if(check_flag((void *)cvode_mem, "CVodeCreate", 0)) return(1);
flag = CVodeSetFdata(cvode_mem, data);
if(check_flag(&flag, "CVodeSetFdata", 1)) return(1);
flag = CVodeSetMaxNumSteps(cvode_mem, 2000);
if(check_flag(&flag, "CVodeSetMaxNumSteps", 1)) return(1);
/* Allocate CVODES memory */
flag = CVodeMalloc(cvode_mem, f, T0, y, CV_SS, reltol, &abstol);
if(check_flag(&flag, "CVodeMalloc", 1)) return(1);
/* Attach CVSPGMR linear solver */
flag = CVSpgmr(cvode_mem, PREC_LEFT, 0);
if(check_flag(&flag, "CVSpgmr", 1)) return(1);
flag = CVSpilsSetPreconditioner(cvode_mem, Precond, PSolve, data);
if(check_flag(&flag, "CVSpilsSetPreconditioner", 1)) return(1);
printf("\n2-species diurnal advection-diffusion problem\n");
/* Forward sensitivity analysis */
if(sensi) {
plist = (int *) malloc(NS * sizeof(int));
if(check_flag((void *)plist, "malloc", 2)) return(1);
for(is=0; is<NS; is++) plist[is] = is;
pbar = (realtype *) malloc(NS * sizeof(realtype));
if(check_flag((void *)pbar, "malloc", 2)) return(1);
for(is=0; is<NS; is++) pbar[is] = data->p[plist[is]];
uS = N_VCloneVectorArray_Serial(NS, y);
if(check_flag((void *)uS, "N_VCloneVectorArray_Serial", 0)) return(1);
for(is=0;is<NS;is++)
N_VConst(ZERO,uS[is]);
flag = CVodeSensMalloc(cvode_mem, NS, sensi_meth, uS);
if(check_flag(&flag, "CVodeSensMalloc", 1)) return(1);
flag = CVodeSetSensErrCon(cvode_mem, err_con);
if(check_flag(&flag, "CVodeSetSensErrCon", 1)) return(1);
flag = CVodeSetSensRho(cvode_mem, ZERO);
if(check_flag(&flag, "CVodeSetSensRho", 1)) return(1);
flag = CVodeSetSensParams(cvode_mem, data->p, pbar, plist);
if(check_flag(&flag, "CVodeSetSensParams", 1)) return(1);
printf("Sensitivity: YES ");
if(sensi_meth == CV_SIMULTANEOUS)
printf("( SIMULTANEOUS +");
else
if(sensi_meth == CV_STAGGERED) printf("( STAGGERED +");
else printf("( STAGGERED1 +");
if(err_con) printf(" FULL ERROR CONTROL )");
else printf(" PARTIAL ERROR CONTROL )");
} else {
printf("Sensitivity: NO ");
}
/* In loop over output points, call CVode, print results, test for error */
printf("\n\n");
printf("========================================================================\n");
printf(" T Q H NST Bottom left Top right \n");
printf("========================================================================\n");
for (iout=1, tout = TWOHR; iout <= NOUT; iout++, tout += TWOHR) {
flag = CVode(cvode_mem, tout, y, &t, CV_NORMAL);
if(check_flag(&flag, "CVode", 1)) break;
PrintOutput(cvode_mem, t, y);
if (sensi) {
flag = CVodeGetSens(cvode_mem, t, uS);
if(check_flag(&flag, "CVodeGetSens", 1)) break;
PrintOutputS(uS);
}
printf("------------------------------------------------------------------------\n");
}
/* Print final statistics */
PrintFinalStats(cvode_mem, sensi);
/* Free memory */
N_VDestroy_Serial(y);
if (sensi) {
N_VDestroyVectorArray_Serial(uS, NS);
free(pbar);
free(plist);
}
FreeUserData(data);
CVodeFree(&cvode_mem);
return(0);
}
int main(int argc, char *argv[])
{
MPI_Comm comm;
void *mem;
UserData data;
int thispe, iout, ier, npes;
long int Neq, local_N, mudq, mldq, mukeep, mlkeep;
realtype rtol, atol, t0, t1, tout, tret;
N_Vector uu, up, constraints, id, res;
mem = NULL;
data = NULL;
uu = up = constraints = id = res = NULL;
/* Get processor number and total number of pe's. */
MPI_Init(&argc, &argv);
comm = MPI_COMM_WORLD;
MPI_Comm_size(comm, &npes);
MPI_Comm_rank(comm, &thispe);
if (npes != NPEX*NPEY) {
if (thispe == 0)
fprintf(stderr,
"\nMPI_ERROR(0): npes = %d is not equal to NPEX*NPEY = %d\n",
npes,NPEX*NPEY);
MPI_Finalize();
return(1);
}
/* Set local length local_N and global length Neq. */
local_N = MXSUB*MYSUB;
Neq = MX * MY;
/* Allocate N-vectors. */
uu = N_VNew_Parallel(comm, local_N, Neq);
if(check_flag((void *)uu, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
up = N_VNew_Parallel(comm, local_N, Neq);
if(check_flag((void *)up, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
res = N_VNew_Parallel(comm, local_N, Neq);
if(check_flag((void *)res, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
constraints = N_VNew_Parallel(comm, local_N, Neq);
if(check_flag((void *)constraints, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
id = N_VNew_Parallel(comm, local_N, Neq);
if(check_flag((void *)id, "N_VNew_Parallel", 0, thispe)) MPI_Abort(comm, 1);
/* Allocate and initialize the data structure. */
data = (UserData) malloc(sizeof *data);
if(check_flag((void *)data, "malloc", 2, thispe)) MPI_Abort(comm, 1);
InitUserData(thispe, comm, data);
/* Initialize the uu, up, id, and constraints profiles. */
SetInitialProfile(uu, up, id, res, data);
N_VConst(ONE, constraints);
t0 = ZERO; t1 = RCONST(0.01);
/* Scalar relative and absolute tolerance. */
rtol = ZERO;
atol = RCONST(1.0e-3);
/* Call IDACreate and IDAMalloc to initialize solution */
mem = IDACreate();
if(check_flag((void *)mem, "IDACreate", 0, thispe)) MPI_Abort(comm, 1);
ier = IDASetUserData(mem, data);
if(check_flag(&ier, "IDASetUserData", 1, thispe)) MPI_Abort(comm, 1);
ier = IDASetSuppressAlg(mem, TRUE);
if(check_flag(&ier, "IDASetSuppressAlg", 1, thispe)) MPI_Abort(comm, 1);
ier = IDASetId(mem, id);
if(check_flag(&ier, "IDASetId", 1, thispe)) MPI_Abort(comm, 1);
ier = IDASetConstraints(mem, constraints);
if(check_flag(&ier, "IDASetConstraints", 1, thispe)) MPI_Abort(comm, 1);
N_VDestroy_Parallel(constraints);
ier = IDAInit(mem, heatres, t0, uu, up);
if(check_flag(&ier, "IDAInit", 1, thispe)) MPI_Abort(comm, 1);
ier = IDASStolerances(mem, rtol, atol);
if(check_flag(&ier, "IDASStolerances", 1, thispe)) MPI_Abort(comm, 1);
mudq = MXSUB;
mldq = MXSUB;
mukeep = 1;
mlkeep = 1;
/* Print problem description */
if (thispe == 0 ) PrintHeader(Neq, rtol, atol);
/*
* -----------------------------
* Case 1 -- mldq = mudq = MXSUB
* -----------------------------
*/
/* Call IDASpgmr to specify the linear solver. */
ier = IDASpgmr(mem, 0);
if(check_flag(&ier, "IDASpgmr", 1, thispe)) MPI_Abort(comm, 1);
/* Call IDABBDPrecInit to initialize BBD preconditioner. */
ier = IDABBDPrecInit(mem, local_N, mudq, mldq, mukeep, mlkeep,
ZERO, reslocal, NULL);
if(check_flag(&ier, "IDABBDPrecAlloc", 1, thispe)) MPI_Abort(comm, 1);
/* Print output heading (on processor 0 only) and initial solution. */
if (thispe == 0) PrintCase(1, mudq, mukeep);
/* Loop over tout, call IDASolve, print output. */
for (tout = t1, iout = 1; iout <= NOUT; iout++, tout *= TWO) {
ier = IDASolve(mem, tout, &tret, uu, up, IDA_NORMAL);
if(check_flag(&ier, "IDASolve", 1, thispe)) MPI_Abort(comm, 1);
PrintOutput(thispe, mem, tret, uu);
}
/* Print final statistics */
if (thispe == 0) PrintFinalStats(mem);
/*
* -----------------------------
* Case 2 -- mldq = mudq = 1
* -----------------------------
*/
mudq = 1;
mldq = 1;
/* Re-initialize the uu and up profiles. */
SetInitialProfile(uu, up, id, res, data);
/* Call IDAReInit to re-initialize IDA. */
ier = IDAReInit(mem, t0, uu, up);
if(check_flag(&ier, "IDAReInit", 1, thispe)) MPI_Abort(comm, 1);
/* Call IDABBDPrecReInit to re-initialize BBD preconditioner. */
ier = IDABBDPrecReInit(mem, mudq, mldq, ZERO);
if(check_flag(&ier, "IDABBDPrecReInit", 1, thispe)) MPI_Abort(comm, 1);
/* Print output heading (on processor 0 only). */
if (thispe == 0) PrintCase(2, mudq, mukeep);
/* Loop over tout, call IDASolve, print output. */
for (tout = t1, iout = 1; iout <= NOUT; iout++, tout *= TWO) {
ier = IDASolve(mem, tout, &tret, uu, up, IDA_NORMAL);
if(check_flag(&ier, "IDASolve", 1, thispe)) MPI_Abort(comm, 1);
PrintOutput(thispe, mem, tret, uu);
}
/* Print final statistics */
if (thispe == 0) PrintFinalStats(mem);
/* Free Memory */
IDAFree(&mem);
free(data);
N_VDestroy_Parallel(id);
N_VDestroy_Parallel(res);
N_VDestroy_Parallel(up);
N_VDestroy_Parallel(uu);
MPI_Finalize();
return(0);
}
int main(int argc, char *argv[])
{
MPI_Comm comm;
void *kmem;
UserData data;
N_Vector cc, sc, constraints;
int globalstrategy;
long int Nlocal;
realtype fnormtol, scsteptol, dq_rel_uu;
int flag, maxl, maxlrst;
long int mudq, mldq, mukeep, mlkeep;
int my_pe, npes, npelast = NPEX*NPEY-1;
data = NULL;
kmem = NULL;
cc = sc = constraints = NULL;
/* Get processor number and total number of pe's */
MPI_Init(&argc, &argv);
comm = MPI_COMM_WORLD;
MPI_Comm_size(comm, &npes);
MPI_Comm_rank(comm, &my_pe);
if (npes != NPEX*NPEY) {
if (my_pe == 0)
printf("\nMPI_ERROR(0): npes=%d is not equal to NPEX*NPEY=%d\n", npes,
NPEX*NPEY);
return(1);
}
/* Allocate memory, and set problem data, initial values, tolerances */
/* Set local length */
Nlocal = NUM_SPECIES*MXSUB*MYSUB;
/* Allocate and initialize user data block */
data = AllocUserData();
if (check_flag((void *)data, "AllocUserData", 2, my_pe)) MPI_Abort(comm, 1);
InitUserData(my_pe, Nlocal, comm, data);
/* Choose global strategy */
globalstrategy = KIN_NONE;
/* Allocate and initialize vectors */
cc = N_VNew_Parallel(comm, Nlocal, NEQ);
if (check_flag((void *)cc, "N_VNew_Parallel", 0, my_pe)) MPI_Abort(comm, 1);
sc = N_VNew_Parallel(comm, Nlocal, NEQ);
if (check_flag((void *)sc, "N_VNew_Parallel", 0, my_pe)) MPI_Abort(comm, 1);
data->rates = N_VNew_Parallel(comm, Nlocal, NEQ);
if (check_flag((void *)data->rates, "N_VNew_Parallel", 0, my_pe))
MPI_Abort(comm, 1);
constraints = N_VNew_Parallel(comm, Nlocal, NEQ);
if (check_flag((void *)constraints, "N_VNew_Parallel", 0, my_pe))
MPI_Abort(comm, 1);
N_VConst(ZERO, constraints);
SetInitialProfiles(cc, sc);
fnormtol = FTOL; scsteptol = STOL;
/* Call KINCreate/KINInit to initialize KINSOL:
nvSpec points to machine environment data
A pointer to KINSOL problem memory is returned and stored in kmem. */
kmem = KINCreate();
if (check_flag((void *)kmem, "KINCreate", 0, my_pe)) MPI_Abort(comm, 1);
/* Vector cc passed as template vector. */
flag = KINInit(kmem, func, cc);
if (check_flag(&flag, "KINInit", 1, my_pe)) MPI_Abort(comm, 1);
flag = KINSetUserData(kmem, data);
if (check_flag(&flag, "KINSetUserData", 1, my_pe)) MPI_Abort(comm, 1);
flag = KINSetConstraints(kmem, constraints);
if (check_flag(&flag, "KINSetConstraints", 1, my_pe)) MPI_Abort(comm, 1);
/* We no longer need the constraints vector since KINSetConstraints
creates a private copy for KINSOL to use. */
N_VDestroy_Parallel(constraints);
flag = KINSetFuncNormTol(kmem, fnormtol);
if (check_flag(&flag, "KINSetFuncNormTol", 1, my_pe)) MPI_Abort(comm, 1);
flag = KINSetScaledStepTol(kmem, scsteptol);
if (check_flag(&flag, "KINSetScaledStepTol", 1, my_pe)) MPI_Abort(comm, 1);
/* Call KINBBDPrecInit to initialize and allocate memory for the
band-block-diagonal preconditioner, and specify the local and
communication functions func_local and gcomm=NULL (all communication
needed for the func_local is already done in func). */
dq_rel_uu = ZERO;
mudq = mldq = 2*NUM_SPECIES - 1;
mukeep = mlkeep = NUM_SPECIES;
/* Call KINBBDSpgmr to specify the linear solver KINSPGMR */
maxl = 20; maxlrst = 2;
flag = KINSpgmr(kmem, maxl);
if (check_flag(&flag, "KINSpgmr", 1, my_pe)) MPI_Abort(comm, 1);
/* Initialize BBD preconditioner */
flag = KINBBDPrecInit(kmem, Nlocal, mudq, mldq, mukeep, mlkeep,
dq_rel_uu, func_local, NULL);
if (check_flag(&flag, "KINBBDPrecInit", 1, my_pe)) MPI_Abort(comm, 1);
flag = KINSpilsSetMaxRestarts(kmem, maxlrst);
if (check_flag(&flag, "KINSpilsSetMaxRestarts", 1, my_pe))
MPI_Abort(comm, 1);
/* Print out the problem size, solution parameters, initial guess. */
if (my_pe == 0)
PrintHeader(globalstrategy, maxl, maxlrst, mudq, mldq, mukeep,
mlkeep, fnormtol, scsteptol);
/* call KINSol and print output concentration profile */
flag = KINSol(kmem, /* KINSol memory block */
cc, /* initial guesss on input; solution vector */
globalstrategy, /* global stragegy choice */
sc, /* scaling vector, for the variable cc */
sc); /* scaling vector for function values fval */
if (check_flag(&flag, "KINSol", 1, my_pe)) MPI_Abort(comm, 1);
if (my_pe == 0) printf("\n\nComputed equilibrium species concentrations:\n");
if (my_pe == 0 || my_pe==npelast) PrintOutput(my_pe, comm, cc);
/* Print final statistics and free memory */
if (my_pe == 0)
PrintFinalStats(kmem);
N_VDestroy_Parallel(cc);
N_VDestroy_Parallel(sc);
KINFree(&kmem);
FreeUserData(data);
MPI_Finalize();
return(0);
}
