void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMaskLayer,
bool aPrintMirrorMode,
void * aData)
{
const GR_DRAWMODE drawmode = (GR_DRAWMODE) 0;
int defaultPenSize = Millimeter2iu( 0.2 );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
DISPLAY_OPTIONS save_opt;
PRINT_PARAMETERS * printParameters = (PRINT_PARAMETERS*) aData; // can be null
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
defaultPenSize = printParameters->m_PenDefaultSize;
save_opt = *displ_opts;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
wxSize pageSizeIU = GetPageSizeIU() / 2;
wxPoint offset( pageSizeIU.x, pageSizeIU.y );
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
{
module->Move( offset );
Print_Module( m_canvas, aDC, module, drawmode, aPrintMaskLayer, drillShapeOpt );
module->Move( -offset );
}
D_PAD::m_PadSketchModePenSize = tmp;
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
}
void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMask,
bool aPrintMirrorMode,
void* aData)
{
const GR_DRAWMODE drawmode = (GR_DRAWMODE) 0;
DISPLAY_OPTIONS save_opt;
BOARD* Pcb = GetBoard();
int defaultPenSize = Millimeter2iu( 0.2 );
bool onePagePerLayer = false;
PRINT_PARAMETERS* printParameters = (PRINT_PARAMETERS*) aData; // can be null
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( printParameters && printParameters->m_OptionPrintPage == 0 )
onePagePerLayer = true;
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
{
drillShapeOpt = printParameters->m_DrillShapeOpt;
defaultPenSize = printParameters->m_PenDefaultSize;
}
save_opt = *displ_opts;
LAYER_ID activeLayer = GetScreen()->m_Active_Layer;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
if( !( aPrintMask & LSET::AllCuMask() ).any() )
{
if( onePagePerLayer )
{
// We can print mask layers (solder mask and solder paste) with the actual
// pad sizes. To do that, we must set ContrastModeDisplay to true and set
// the GetScreen()->m_Active_Layer to the current printed layer
displ_opts->m_ContrastModeDisplay = true;
displ_opts->m_DisplayPadFill = true;
// Calculate the active layer number to print from its mask layer:
GetScreen()->m_Active_Layer = B_Cu;
for( LAYER_NUM id = LAYER_ID_COUNT-1; id >= 0; --id )
{
if( aPrintMask[id] )
{
GetScreen()->m_Active_Layer = LAYER_ID( id );
break;
}
}
// pads on Silkscreen layer are usually plot in sketch mode:
if( GetScreen()->m_Active_Layer == B_SilkS ||
GetScreen()->m_Active_Layer == F_SilkS )
{
displ_opts->m_DisplayPadFill = false;
}
}
else
{
displ_opts->m_DisplayPadFill = false;
}
}
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible( NO_CONNECTS_VISIBLE );
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, false );
bool anchorsTmp = GetBoard()->IsElementVisible( ANCHOR_VISIBLE );
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, false );
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
for( BOARD_ITEM* item = Pcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
case PCB_DIMENSION_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
if( aPrintMask[item->GetLayer()] )
item->Draw( m_canvas, aDC, drawmode );
break;
case PCB_MARKER_T:
default:
break;
}
}
// Print tracks
for( TRACK* track = Pcb->m_Track; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
if( track->Type() == PCB_VIA_T ) // VIA encountered.
{
int radius = track->GetWidth() / 2;
const VIA* via = static_cast<const VIA*>( track );
EDA_COLOR_T color = g_ColorsSettings.GetItemColor( VIAS_VISIBLE + via->GetViaType() );
GRFilledCircle( m_canvas->GetClipBox(), aDC,
via->GetStart().x,
via->GetStart().y,
radius,
0, color, color );
}
else
{
track->Draw( m_canvas, aDC, drawmode );
}
}
// Outdated: only for compatibility to old boards
for( TRACK* track = Pcb->m_Zone; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
track->Draw( m_canvas, aDC, drawmode );
}
// Draw filled areas (i.e. zones)
for( int ii = 0; ii < Pcb->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = Pcb->GetArea( ii );
if( aPrintMask[zone->GetLayer()] )
zone->DrawFilledArea( m_canvas, aDC, drawmode );
}
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
for( MODULE* module = (MODULE*) Pcb->m_Modules; module; module = module->Next() )
{
Print_Module( m_canvas, aDC, module, drawmode, aPrintMask, drillShapeOpt );
}
D_PAD::m_PadSketchModePenSize = tmp;
/* Print via holes in bg color: Not sure it is good for buried or blind
* vias */
if( drillShapeOpt != PRINT_PARAMETERS::NO_DRILL_SHAPE )
{
TRACK* track = Pcb->m_Track;
EDA_COLOR_T color = WHITE;
bool blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
for( ; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
if( track->Type() == PCB_VIA_T ) // VIA encountered.
{
int diameter;
const VIA *via = static_cast<const VIA*>( track );
if( drillShapeOpt == PRINT_PARAMETERS::SMALL_DRILL_SHAPE )
diameter = std::min( SMALL_DRILL, via->GetDrillValue() );
else
diameter = via->GetDrillValue();
GRFilledCircle( m_canvas->GetClipBox(), aDC,
track->GetStart().x, track->GetStart().y,
diameter/2,
0, color, color );
}
}
GRForceBlackPen( blackpenstate );
}
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetScreen()->m_Active_Layer = activeLayer;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, anchorsTmp );
}
void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMaskLayer,
bool aPrintMirrorMode,
void * aData)
{
GR_DRAWMODE drawmode = GR_COPY;
int defaultPenSize = Millimeter2iu( 0.2 );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
DISPLAY_OPTIONS save_opt;
PRINT_PARAMETERS * printParameters = (PRINT_PARAMETERS*) aData; // can be null
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
defaultPenSize = printParameters->m_PenDefaultSize;
save_opt = *displ_opts;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
// The OR mode is used in color mode, but be aware the background *must be
// BLACK. In the print page dialog, we first print in BLACK, and after
// reprint in color, on the black "local" background, in OR mode the black
// print is not made before, only a white page is printed
if( GetGRForceBlackPenState() == false )
drawmode = GR_OR;
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
wxSize pageSizeIU = GetPageSizeIU() / 2;
wxPoint offset( pageSizeIU.x, pageSizeIU.y );
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
{
module->Move( offset );
Print_Module( m_canvas, aDC, module, drawmode, aPrintMaskLayer, drillShapeOpt );
module->Move( -offset );
}
D_PAD::m_PadSketchModePenSize = tmp;
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
}
