void CPageAdvanced::DlgOK(HWND hWnd)
{
// Update save-state filename
{
char szFilename[MAX_PATH];
memset(szFilename, 0, sizeof(szFilename));
* (USHORT*) szFilename = sizeof(szFilename);
UINT nLineLength = SendDlgItemMessage(hWnd, IDC_SAVESTATE_FILENAME, EM_LINELENGTH, 0, 0);
SendDlgItemMessage(hWnd, IDC_SAVESTATE_FILENAME, EM_GETLINE, 0, (LPARAM)szFilename);
nLineLength = nLineLength > sizeof(szFilename)-1 ? sizeof(szFilename)-1 : nLineLength;
szFilename[nLineLength] = 0x00;
m_PropertySheetHelper.SaveStateUpdate();
}
// Update printer dump filename
{
char szFilename[MAX_PATH];
memset(szFilename, 0, sizeof(szFilename));
* (USHORT*) szFilename = sizeof(szFilename);
UINT nLineLength = SendDlgItemMessage(hWnd, IDC_PRINTER_DUMP_FILENAME, EM_LINELENGTH, 0, 0);
SendDlgItemMessage(hWnd, IDC_PRINTER_DUMP_FILENAME, EM_GETLINE, 0, (LPARAM)szFilename);
nLineLength = nLineLength > sizeof(szFilename)-1 ? sizeof(szFilename)-1 : nLineLength;
szFilename[nLineLength] = 0x00;
Printer_SetFilename(szFilename);
RegSaveString(TEXT(REG_CONFIG), REGVALUE_PRINTER_FILENAME, 1, Printer_GetFilename());
}
g_bSaveStateOnExit = IsDlgButtonChecked(hWnd, IDC_SAVESTATE_ON_EXIT) ? true : false;
REGSAVE(TEXT(REGVALUE_SAVE_STATE_ON_EXIT), g_bSaveStateOnExit ? 1 : 0);
g_bDumpToPrinter = IsDlgButtonChecked(hWnd, IDC_DUMPTOPRINTER ) ? true : false;
REGSAVE(TEXT(REGVALUE_DUMP_TO_PRINTER), g_bDumpToPrinter ? 1 : 0);
g_bConvertEncoding = IsDlgButtonChecked(hWnd, IDC_PRINTER_CONVERT_ENCODING ) ? true : false;
REGSAVE(TEXT(REGVALUE_CONVERT_ENCODING), g_bConvertEncoding ? 1 : 0);
g_bFilterUnprintable = IsDlgButtonChecked(hWnd, IDC_PRINTER_FILTER_UNPRINTABLE ) ? true : false;
REGSAVE(TEXT(REGVALUE_FILTER_UNPRINTABLE), g_bFilterUnprintable ? 1 : 0);
g_bPrinterAppend = IsDlgButtonChecked(hWnd, IDC_PRINTER_APPEND) ? true : false;
REGSAVE(TEXT(REGVALUE_PRINTER_APPEND), g_bPrinterAppend ? 1 : 0);
//
Printer_SetIdleLimit((short)SendDlgItemMessage(hWnd, IDC_SPIN_PRINTER_IDLE , UDM_GETPOS, 0, 0));
REGSAVE(TEXT(REGVALUE_PRINTER_IDLE_LIMIT),Printer_GetIdleLimit());
m_PropertySheetHelper.PostMsgAfterClose(hWnd, m_Page);
}
//Reads configuration from the registry entries
void LoadConfiguration(void)
{
DWORD dwComputerType;
if (REGLOAD(TEXT(REGVALUE_APPLE2_TYPE), &dwComputerType))
{
if ((dwComputerType >= A2TYPE_MAX) || (dwComputerType >= A2TYPE_UNDEFINED && dwComputerType < A2TYPE_CLONE))
dwComputerType = A2TYPE_APPLE2EENHANCED;
g_Apple2Type = (eApple2Type) dwComputerType;
}
else // Support older AppleWin registry entries
{
REGLOAD(TEXT(REGVALUE_OLD_APPLE2_TYPE), &dwComputerType);
switch (dwComputerType)
{
// NB. No A2TYPE_APPLE2E (this is correct)
case 0: g_Apple2Type = A2TYPE_APPLE2;
case 1: g_Apple2Type = A2TYPE_APPLE2PLUS;
case 2: g_Apple2Type = A2TYPE_APPLE2EENHANCED;
default: g_Apple2Type = A2TYPE_APPLE2EENHANCED;
}
}
switch (g_Apple2Type) //Sets the character set for the Apple model/clone
{
case A2TYPE_APPLE2: g_nCharsetType = 0; break;
case A2TYPE_APPLE2PLUS: g_nCharsetType = 0; break;
case A2TYPE_APPLE2E: g_nCharsetType = 0; break;
case A2TYPE_APPLE2EENHANCED:g_nCharsetType = 0; break;
case A2TYPE_PRAVETS82: g_nCharsetType = 1; break;
case A2TYPE_PRAVETS8A: g_nCharsetType = 2; break;
case A2TYPE_PRAVETS8M: g_nCharsetType = 3; break; //This charset has a very small difference with the PRAVETS82 one an probably has some misplaced characters. Still the Pravets82 charset is used, because setting charset to 3 results in some problems.
}
//
if (!REGLOAD(TEXT(REGVALUE_JOYSTICK0_EMU_TYPE), &joytype[JN_JOYSTICK0]))
LoadConfigOldJoystick(JN_JOYSTICK0);
if (!REGLOAD(TEXT(REGVALUE_JOYSTICK1_EMU_TYPE), &joytype[JN_JOYSTICK1]))
LoadConfigOldJoystick(JN_JOYSTICK1);
REGLOAD(TEXT("Sound Emulation") ,&soundtype);
char aySerialPortName[ CSuperSerialCard::SIZEOF_SERIALCHOICE_ITEM ];
if (RegLoadString( TEXT("Configuration"),
TEXT(REGVALUE_SERIAL_PORT_NAME),
TRUE,
aySerialPortName,
sizeof(aySerialPortName) ) )
{
sg_SSC.SetSerialPortName(aySerialPortName);
}
REGLOAD(TEXT(REGVALUE_EMULATION_SPEED) ,&g_dwSpeed);
REGLOAD(TEXT(REGVALUE_ENHANCE_DISK_SPEED),(DWORD *)&enhancedisk);
Config_Load_Video();
REGLOAD(TEXT("Uthernet Active") ,(DWORD *)&tfe_enabled);
SetCurrentCLK6502();
//
DWORD dwTmp;
if(REGLOAD(TEXT(REGVALUE_THE_FREEZES_F8_ROM), &dwTmp))
sg_PropertySheet.SetTheFreezesF8Rom(dwTmp);
if(REGLOAD(TEXT(REGVALUE_SPKR_VOLUME), &dwTmp))
SpkrSetVolume(dwTmp, sg_PropertySheet.GetVolumeMax());
if(REGLOAD(TEXT(REGVALUE_MB_VOLUME), &dwTmp))
MB_SetVolume(dwTmp, sg_PropertySheet.GetVolumeMax());
if(REGLOAD(TEXT(REGVALUE_SAVE_STATE_ON_EXIT), &dwTmp))
g_bSaveStateOnExit = dwTmp ? true : false;
if(REGLOAD(TEXT(REGVALUE_DUMP_TO_PRINTER), &dwTmp))
g_bDumpToPrinter = dwTmp ? true : false;
if(REGLOAD(TEXT(REGVALUE_CONVERT_ENCODING), &dwTmp))
g_bConvertEncoding = dwTmp ? true : false;
if(REGLOAD(TEXT(REGVALUE_FILTER_UNPRINTABLE), &dwTmp))
g_bFilterUnprintable = dwTmp ? true : false;
if(REGLOAD(TEXT(REGVALUE_PRINTER_APPEND), &dwTmp))
g_bPrinterAppend = dwTmp ? true : false;
if(REGLOAD(TEXT(REGVALUE_HDD_ENABLED), &dwTmp))
HD_SetEnabled(dwTmp ? true : false);
char szHDVPathname[MAX_PATH] = {0};
if(RegLoadString(TEXT(REG_PREFS), TEXT(REGVALUE_PREF_LAST_HARDDISK_1), 1, szHDVPathname, sizeof(szHDVPathname)))
HD_InsertDisk(HARDDISK_1, szHDVPathname);
if(RegLoadString(TEXT(REG_PREFS), TEXT(REGVALUE_PREF_LAST_HARDDISK_2), 1, szHDVPathname, sizeof(szHDVPathname)))
HD_InsertDisk(HARDDISK_2, szHDVPathname);
if(REGLOAD(TEXT(REGVALUE_PDL_XTRIM), &dwTmp))
JoySetTrim((short)dwTmp, true);
if(REGLOAD(TEXT(REGVALUE_PDL_YTRIM), &dwTmp))
JoySetTrim((short)dwTmp, false);
if(REGLOAD(TEXT(REGVALUE_SCROLLLOCK_TOGGLE), &dwTmp))
sg_PropertySheet.SetScrollLockToggle(dwTmp);
if(REGLOAD(TEXT(REGVALUE_CURSOR_CONTROL), &dwTmp))
sg_PropertySheet.SetJoystickCursorControl(dwTmp);
if(REGLOAD(TEXT(REGVALUE_AUTOFIRE), &dwTmp))
sg_PropertySheet.SetAutofire(dwTmp);
if(REGLOAD(TEXT(REGVALUE_CENTERING_CONTROL), &dwTmp))
sg_PropertySheet.SetJoystickCenteringControl(dwTmp);
if(REGLOAD(TEXT(REGVALUE_MOUSE_CROSSHAIR), &dwTmp))
sg_PropertySheet.SetMouseShowCrosshair(dwTmp);
if(REGLOAD(TEXT(REGVALUE_MOUSE_RESTRICT_TO_WINDOW), &dwTmp))
sg_PropertySheet.SetMouseRestrictToWindow(dwTmp);
if(REGLOAD(TEXT(REGVALUE_SLOT4), &dwTmp))
g_Slot4 = (SS_CARDTYPE) dwTmp;
if(REGLOAD(TEXT(REGVALUE_SLOT5), &dwTmp))
g_Slot5 = (SS_CARDTYPE) dwTmp;
if (g_Slot4 == CT_MockingboardC || g_Slot4 == CT_Phasor)
MB_SetSoundcardType(g_Slot4);
else
MB_SetSoundcardType(CT_Empty);
//
char szFilename[MAX_PATH] = {0};
// Current/Starting Dir is the "root" of where the user keeps his disk images
RegLoadString(TEXT(REG_PREFS), TEXT(REGVALUE_PREF_START_DIR), 1, szFilename, MAX_PATH);
if (szFilename[0] == 0)
GetCurrentDirectory(sizeof(szFilename), szFilename);
SetCurrentImageDir(szFilename);
Disk_LoadLastDiskImage(DRIVE_1);
Disk_LoadLastDiskImage(DRIVE_2);
//
szFilename[0] = 0;
RegLoadString(TEXT(REG_CONFIG),TEXT(REGVALUE_SAVESTATE_FILENAME),1,szFilename,sizeof(szFilename));
Snapshot_SetFilename(szFilename); // If not in Registry than default will be used (ie. g_sCurrentDir + default filename)
szFilename[0] = 0;
RegLoadString(TEXT(REG_CONFIG),TEXT(REGVALUE_PRINTER_FILENAME),1,szFilename,sizeof(szFilename));
Printer_SetFilename(szFilename); // If not in Registry than default will be used
dwTmp = 10;
REGLOAD(TEXT(REGVALUE_PRINTER_IDLE_LIMIT), &dwTmp);
Printer_SetIdleLimit(dwTmp);
char szUthernetInt[MAX_PATH] = {0};
RegLoadString(TEXT(REG_CONFIG),TEXT("Uthernet Interface"),1,szUthernetInt,MAX_PATH);
update_tfe_interface(szUthernetInt,NULL);
if (REGLOAD(TEXT(REGVALUE_WINDOW_SCALE), &dwTmp))
SetViewportScale(dwTmp);
if (REGLOAD(TEXT(REGVALUE_CONFIRM_REBOOT), &dwTmp))
g_bConfirmReboot = dwTmp;
}
