void r200TclPrimitive( struct gl_context *ctx,
GLenum prim,
int hw_prim )
{
r200ContextPtr rmesa = R200_CONTEXT(ctx);
GLuint newprim = hw_prim | R200_VF_TCL_OUTPUT_VTX_ENABLE;
radeon_prepare_render(&rmesa->radeon);
if (rmesa->radeon.NewGLState)
r200ValidateState( ctx );
if (newprim != rmesa->tcl.hw_primitive ||
!discrete_prim[hw_prim&0xf]) {
/* need to disable perspective-correct texturing for point sprites */
if ((prim & PRIM_MODE_MASK) == GL_POINTS && ctx->Point.PointSprite) {
if (rmesa->hw.set.cmd[SET_RE_CNTL] & R200_PERSPECTIVE_ENABLE) {
R200_STATECHANGE( rmesa, set );
rmesa->hw.set.cmd[SET_RE_CNTL] &= ~R200_PERSPECTIVE_ENABLE;
}
}
else if (!(rmesa->hw.set.cmd[SET_RE_CNTL] & R200_PERSPECTIVE_ENABLE)) {
R200_STATECHANGE( rmesa, set );
rmesa->hw.set.cmd[SET_RE_CNTL] |= R200_PERSPECTIVE_ENABLE;
}
R200_NEWPRIM( rmesa );
rmesa->tcl.hw_primitive = newprim;
}
}
static void transition_to_swtnl( struct gl_context *ctx )
{
r200ContextPtr rmesa = R200_CONTEXT(ctx);
TNLcontext *tnl = TNL_CONTEXT(ctx);
R200_NEWPRIM( rmesa );
r200ChooseVertexState( ctx );
r200ChooseRenderState( ctx );
_tnl_validate_shine_tables( ctx );
tnl->Driver.NotifyMaterialChange =
_tnl_validate_shine_tables;
radeonReleaseArrays( ctx, ~0 );
/* Still using the D3D based hardware-rasterizer from the radeon;
* need to put the card into D3D mode to make it work:
*/
R200_STATECHANGE( rmesa, vap );
rmesa->hw.vap.cmd[VAP_SE_VAP_CNTL] &= ~(R200_VAP_TCL_ENABLE|R200_VAP_PROG_VTX_SHADER_ENABLE);
}
/* Begin/End
*/
static void r200_Begin( GLenum mode )
{
GET_CURRENT_CONTEXT(ctx);
r200ContextPtr rmesa = R200_CONTEXT(ctx);
if (R200_DEBUG & DEBUG_VFMT)
fprintf(stderr, "%s( %s )\n", __FUNCTION__,
_mesa_lookup_enum_by_nr( mode ));
if (mode > GL_POLYGON) {
_mesa_error( ctx, GL_INVALID_ENUM, "glBegin" );
return;
}
if (rmesa->vb.prim[0] != GL_POLYGON+1) {
_mesa_error( ctx, GL_INVALID_OPERATION, "glBegin" );
return;
}
if (ctx->NewState)
_mesa_update_state( ctx );
if (rmesa->NewGLState)
r200ValidateState( ctx );
if (rmesa->vb.recheck)
r200VtxfmtValidate( ctx );
if (!rmesa->vb.installed) {
CALL_Begin(GET_DISPATCH(), (mode));
return;
}
if (rmesa->dma.flush && rmesa->vb.counter < 12) {
if (R200_DEBUG & DEBUG_VFMT)
fprintf(stderr, "%s: flush almost-empty buffers\n", __FUNCTION__);
flush_prims( rmesa );
}
/* Need to arrange to save vertices here? Or always copy from dma (yuk)?
*/
if (!rmesa->dma.flush) {
if (rmesa->dma.current.ptr + 12*rmesa->vb.vertex_size*4 >
rmesa->dma.current.end) {
R200_NEWPRIM( rmesa );
r200RefillCurrentDmaRegion( rmesa );
}
rmesa->vb.dmaptr = (int *)(rmesa->dma.current.address + rmesa->dma.current.ptr);
rmesa->vb.counter = (rmesa->dma.current.end - rmesa->dma.current.ptr) /
(rmesa->vb.vertex_size * 4);
rmesa->vb.counter--;
rmesa->vb.initial_counter = rmesa->vb.counter;
rmesa->vb.notify = wrap_buffer;
rmesa->dma.flush = flush_prims;
ctx->Driver.NeedFlush |= FLUSH_STORED_VERTICES;
}
rmesa->vb.prim[0] = mode;
start_prim( rmesa, mode | PRIM_BEGIN );
}
/**
* Determines the hardware vertex format based on the current state vector.
*
* \returns
* If the hardware TCL unit is capable of handling the current state vector,
* \c GL_TRUE is returned. Otherwise, \c GL_FALSE is returned.
*
* \todo
* Make this color format selection data driven. If we receive only ubytes,
* send color as ubytes. Also check if converting (with free checking for
* overflow) is cheaper than sending floats directly.
*
* \todo
* When intializing texture coordinates, it might be faster to just copy the
* entire \c VERT_ATTRIB_TEX0 vector into the vertex buffer. It may mean that
* some of the data (i.e., the last texture coordinate components) get copied
* over, but that still may be faster than the conditional branching. If
* nothing else, the code will be smaller and easier to follow.
*/
static GLboolean check_vtx_fmt( GLcontext *ctx )
{
r200ContextPtr rmesa = R200_CONTEXT(ctx);
GLuint ind0 = R200_VTX_Z0;
GLuint ind1 = 0;
GLuint i;
GLuint count[R200_MAX_TEXTURE_UNITS];
if (rmesa->TclFallback || rmesa->vb.fell_back || ctx->CompileFlag)
return GL_FALSE;
if (ctx->Driver.NeedFlush & FLUSH_UPDATE_CURRENT)
ctx->Driver.FlushVertices( ctx, FLUSH_UPDATE_CURRENT );
/* Make all this event-driven:
*/
if (ctx->Light.Enabled) {
ind0 |= R200_VTX_N0;
if (ctx->Light.ColorMaterialEnabled)
ind0 |= R200_VTX_FP_RGBA << R200_VTX_COLOR_0_SHIFT;
else
ind0 |= R200_VTX_PK_RGBA << R200_VTX_COLOR_0_SHIFT;
}
else {
/* TODO: make this data driven?
*/
ind0 |= R200_VTX_PK_RGBA << R200_VTX_COLOR_0_SHIFT;
if (ctx->_TriangleCaps & DD_SEPARATE_SPECULAR) {
ind0 |= R200_VTX_PK_RGBA << R200_VTX_COLOR_1_SHIFT;
}
}
if ( ctx->Fog.FogCoordinateSource == GL_FOG_COORD ) {
ind0 |= R200_VTX_DISCRETE_FOG;
}
for ( i = 0 ; i < ctx->Const.MaxTextureUnits ; i++ ) {
count[i] = 0;
if (ctx->Texture.Unit[i]._ReallyEnabled) {
if (rmesa->TexGenNeedNormals[i]) {
ind0 |= R200_VTX_N0;
}
else {
switch( ctx->Texture.Unit[i]._ReallyEnabled ) {
case TEXTURE_CUBE_BIT:
case TEXTURE_3D_BIT:
count[i] = 3;
break;
case TEXTURE_2D_BIT:
case TEXTURE_RECT_BIT:
count[i] = 2;
break;
case TEXTURE_1D_BIT:
count[i] = 1;
break;
}
ind1 |= count[i] << (3 * i);
}
}
}
if (R200_DEBUG & (DEBUG_VFMT|DEBUG_STATE))
fprintf(stderr, "%s: format: 0x%x, 0x%x\n", __FUNCTION__, ind0, ind1 );
R200_NEWPRIM(rmesa);
rmesa->vb.vtxfmt_0 = ind0;
rmesa->vb.vtxfmt_1 = ind1;
rmesa->vb.prim = &ctx->Driver.CurrentExecPrimitive;
rmesa->vb.vertex_size = 3;
rmesa->vb.normalptr = ctx->Current.Attrib[VERT_ATTRIB_NORMAL];
rmesa->vb.colorptr = NULL;
rmesa->vb.floatcolorptr = ctx->Current.Attrib[VERT_ATTRIB_COLOR0];
rmesa->vb.fogptr = ctx->Current.Attrib[VERT_ATTRIB_FOG];
rmesa->vb.specptr = NULL;
rmesa->vb.floatspecptr = ctx->Current.Attrib[VERT_ATTRIB_COLOR1];
rmesa->vb.texcoordptr[0] = ctx->Current.Attrib[VERT_ATTRIB_TEX0];
rmesa->vb.texcoordptr[1] = ctx->Current.Attrib[VERT_ATTRIB_TEX1];
rmesa->vb.texcoordptr[2] = ctx->Current.Attrib[VERT_ATTRIB_TEX2];
rmesa->vb.texcoordptr[3] = ctx->Current.Attrib[VERT_ATTRIB_TEX3];
rmesa->vb.texcoordptr[4] = ctx->Current.Attrib[VERT_ATTRIB_TEX4];
rmesa->vb.texcoordptr[5] = ctx->Current.Attrib[VERT_ATTRIB_TEX5];
rmesa->vb.texcoordptr[6] = ctx->Current.Attrib[VERT_ATTRIB_TEX0]; /* dummy */
rmesa->vb.texcoordptr[7] = ctx->Current.Attrib[VERT_ATTRIB_TEX0]; /* dummy */
/* Run through and initialize the vertex components in the order
* the hardware understands:
*/
if (ind0 & R200_VTX_N0) {
rmesa->vb.normalptr = &rmesa->vb.vertex[rmesa->vb.vertex_size].f;
rmesa->vb.vertex_size += 3;
rmesa->vb.normalptr[0] = ctx->Current.Attrib[VERT_ATTRIB_NORMAL][0];
rmesa->vb.normalptr[1] = ctx->Current.Attrib[VERT_ATTRIB_NORMAL][1];
rmesa->vb.normalptr[2] = ctx->Current.Attrib[VERT_ATTRIB_NORMAL][2];
}
if (ind0 & R200_VTX_DISCRETE_FOG) {
rmesa->vb.fogptr = &rmesa->vb.vertex[rmesa->vb.vertex_size].f;
rmesa->vb.vertex_size += 1;
rmesa->vb.fogptr[0] = ctx->Current.Attrib[VERT_ATTRIB_FOG][0];
}
if (VTX_COLOR(ind0, 0) == R200_VTX_PK_RGBA) {
rmesa->vb.colorptr = &rmesa->vb.vertex[rmesa->vb.vertex_size].color;
rmesa->vb.vertex_size += 1;
UNCLAMPED_FLOAT_TO_CHAN( rmesa->vb.colorptr->red, ctx->Current.Attrib[VERT_ATTRIB_COLOR0][0] );
UNCLAMPED_FLOAT_TO_CHAN( rmesa->vb.colorptr->green, ctx->Current.Attrib[VERT_ATTRIB_COLOR0][1] );
UNCLAMPED_FLOAT_TO_CHAN( rmesa->vb.colorptr->blue, ctx->Current.Attrib[VERT_ATTRIB_COLOR0][2] );
UNCLAMPED_FLOAT_TO_CHAN( rmesa->vb.colorptr->alpha, ctx->Current.Attrib[VERT_ATTRIB_COLOR0][3] );
}
else if (VTX_COLOR(ind0, 0) == R200_VTX_FP_RGBA) {
rmesa->vb.floatcolorptr = &rmesa->vb.vertex[rmesa->vb.vertex_size].f;
rmesa->vb.vertex_size += 4;
rmesa->vb.floatcolorptr[0] = ctx->Current.Attrib[VERT_ATTRIB_COLOR0][0];
rmesa->vb.floatcolorptr[1] = ctx->Current.Attrib[VERT_ATTRIB_COLOR0][1];
rmesa->vb.floatcolorptr[2] = ctx->Current.Attrib[VERT_ATTRIB_COLOR0][2];
rmesa->vb.floatcolorptr[3] = ctx->Current.Attrib[VERT_ATTRIB_COLOR0][3];
}
else if (VTX_COLOR(ind0, 0) == R200_VTX_FP_RGB) {
rmesa->vb.floatcolorptr = &rmesa->vb.vertex[rmesa->vb.vertex_size].f;
rmesa->vb.vertex_size += 3;
rmesa->vb.floatcolorptr[0] = ctx->Current.Attrib[VERT_ATTRIB_COLOR0][0];
rmesa->vb.floatcolorptr[1] = ctx->Current.Attrib[VERT_ATTRIB_COLOR0][1];
rmesa->vb.floatcolorptr[2] = ctx->Current.Attrib[VERT_ATTRIB_COLOR0][2];
}
if (VTX_COLOR(ind0, 1) == R200_VTX_PK_RGBA) {
rmesa->vb.specptr = &rmesa->vb.vertex[rmesa->vb.vertex_size].color;
rmesa->vb.vertex_size += 1;
UNCLAMPED_FLOAT_TO_CHAN( rmesa->vb.specptr->red, ctx->Current.Attrib[VERT_ATTRIB_COLOR1][0] );
UNCLAMPED_FLOAT_TO_CHAN( rmesa->vb.specptr->green, ctx->Current.Attrib[VERT_ATTRIB_COLOR1][1] );
UNCLAMPED_FLOAT_TO_CHAN( rmesa->vb.specptr->blue, ctx->Current.Attrib[VERT_ATTRIB_COLOR1][2] );
}
for ( i = 0 ; i < ctx->Const.MaxTextureUnits ; i++ ) {
if ( count[i] != 0 ) {
float * const attr = ctx->Current.Attrib[VERT_ATTRIB_TEX0+i];
unsigned j;
rmesa->vb.texcoordptr[i] = &rmesa->vb.vertex[rmesa->vb.vertex_size].f;
for ( j = 0 ; j < count[i] ; j++ ) {
rmesa->vb.texcoordptr[i][j] = attr[j];
}
rmesa->vb.vertex_size += count[i];
}
}
if (rmesa->vb.installed_vertex_format != rmesa->vb.vtxfmt_0) {
if (R200_DEBUG & DEBUG_VFMT)
fprintf(stderr, "reinstall on vertex_format change\n");
_mesa_install_exec_vtxfmt( ctx, &rmesa->vb.vtxfmt );
rmesa->vb.installed_vertex_format = rmesa->vb.vtxfmt_0;
}
if (R200_DEBUG & DEBUG_VFMT)
fprintf(stderr, "%s -- success\n", __FUNCTION__);
return GL_TRUE;
}
