/**
Prints an assert message containing a filename, line number, and description.
This may be followed by a breakpoint or a dead loop.
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recusrsion. If DebugAssert() is called while
processing another DebugAssert(), then DebugAssert() must return immediately.
If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.
If Description is NULL, then a <Description> string of "(NULL) Description" is printed.
@param FileName Pointer to the name of the source file that generated the assert condition.
@param LineNumber The line number in the source file that generated the assert condition
@param Description Pointer to the description of the assert condition.
**/
VOID
EFIAPI
DebugAssert (
IN CONST CHAR8 *FileName,
IN UINTN LineNumber,
IN CONST CHAR8 *Description
)
{
UINT64 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof(UINT64)];
EFI_DEBUG_ASSERT_DATA *AssertData;
UINTN TotalSize;
CHAR8 *Temp;
UINTN FileNameLength;
UINTN DescriptionLength;
//
// Make sure it will all fit in the passed in buffer
//
FileNameLength = AsciiStrLen (FileName);
DescriptionLength = AsciiStrLen (Description);
TotalSize = sizeof (EFI_DEBUG_ASSERT_DATA) + FileNameLength + 1 + DescriptionLength + 1;
if (TotalSize <= EFI_STATUS_CODE_DATA_MAX_SIZE) {
//
// Fill in EFI_DEBUG_ASSERT_DATA
//
AssertData = (EFI_DEBUG_ASSERT_DATA *)Buffer;
AssertData->LineNumber = (UINT32)LineNumber;
//
// Copy Ascii FileName including NULL.
//
Temp = AsciiStrCpy ((CHAR8 *)(AssertData + 1), FileName);
//
// Copy Ascii Description
//
AsciiStrCpy (Temp + AsciiStrLen (FileName) + 1, Description);
REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
(EFI_ERROR_CODE | EFI_ERROR_UNRECOVERED),
(EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_EC_ILLEGAL_SOFTWARE_STATE),
AssertData,
TotalSize
);
}
//
// Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
//
if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {
CpuBreakpoint ();
} else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {
CpuDeadLoop ();
}
}
/**
This is the main Dispatcher for SMM and it exits when there are no more
drivers to run. Drain the mScheduledQueue and load and start a PE
image for each driver. Search the mDiscoveredList to see if any driver can
be placed on the mScheduledQueue. If no drivers are placed on the
mScheduledQueue exit the function.
@retval EFI_SUCCESS All of the SMM Drivers that could be dispatched
have been run and the SMM Entry Point has been
registered.
@retval EFI_NOT_READY The SMM Driver that registered the SMM Entry Point
was just dispatched.
@retval EFI_NOT_FOUND There are no SMM Drivers available to be dispatched.
@retval EFI_ALREADY_STARTED The SMM Dispatcher is already running
**/
EFI_STATUS
SmmDispatcher (
VOID
)
{
EFI_STATUS Status;
LIST_ENTRY *Link;
EFI_SMM_DRIVER_ENTRY *DriverEntry;
BOOLEAN ReadyToRun;
BOOLEAN PreviousSmmEntryPointRegistered;
if (!gRequestDispatch) {
return EFI_NOT_FOUND;
}
if (gDispatcherRunning) {
//
// If the dispatcher is running don't let it be restarted.
//
return EFI_ALREADY_STARTED;
}
gDispatcherRunning = TRUE;
do {
//
// Drain the Scheduled Queue
//
while (!IsListEmpty (&mScheduledQueue)) {
DriverEntry = CR (
mScheduledQueue.ForwardLink,
EFI_SMM_DRIVER_ENTRY,
ScheduledLink,
EFI_SMM_DRIVER_ENTRY_SIGNATURE
);
//
// Load the SMM Driver image into memory. If the Driver was transitioned from
// Untrused to Scheduled it would have already been loaded so we may need to
// skip the LoadImage
//
if (DriverEntry->ImageHandle == NULL) {
Status = SmmLoadImage (DriverEntry);
//
// Update the driver state to reflect that it's been loaded
//
if (EFI_ERROR (Status)) {
//
// The SMM Driver could not be loaded, and do not attempt to load or start it again.
// Take driver from Scheduled to Initialized.
//
DriverEntry->Initialized = TRUE;
DriverEntry->Scheduled = FALSE;
RemoveEntryList (&DriverEntry->ScheduledLink);
//
// If it's an error don't try the StartImage
//
continue;
}
}
DriverEntry->Scheduled = FALSE;
DriverEntry->Initialized = TRUE;
RemoveEntryList (&DriverEntry->ScheduledLink);
REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
EFI_PROGRESS_CODE,
EFI_SOFTWARE_SMM_DRIVER | EFI_SW_PC_INIT_BEGIN,
&DriverEntry->ImageHandle,
sizeof (DriverEntry->ImageHandle)
);
//
// Cache state of SmmEntryPointRegistered before calling entry point
//
PreviousSmmEntryPointRegistered = gSmmCorePrivate->SmmEntryPointRegistered;
//
// For each SMM driver, pass NULL as ImageHandle
//
Status = ((EFI_IMAGE_ENTRY_POINT)(UINTN)DriverEntry->ImageEntryPoint)(DriverEntry->ImageHandle, gST);
if (EFI_ERROR(Status)){
SmmFreePages(DriverEntry->ImageBuffer, DriverEntry->NumberOfPage);
}
REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
EFI_PROGRESS_CODE,
EFI_SOFTWARE_SMM_DRIVER | EFI_SW_PC_INIT_END,
&DriverEntry->ImageHandle,
sizeof (DriverEntry->ImageHandle)
);
if (!PreviousSmmEntryPointRegistered && gSmmCorePrivate->SmmEntryPointRegistered) {
//
// Return immediately if the SMM Entry Point was registered by the SMM
// Driver that was just dispatched. The SMM IPL will reinvoke the SMM
// Core Dispatcher. This is required so SMM Mode may be enabled as soon
// as all the dependent SMM Drivers for SMM Mode have been dispatched.
// Once the SMM Entry Point has been registered, then SMM Mode will be
// used.
//
gRequestDispatch = TRUE;
gDispatcherRunning = FALSE;
return EFI_NOT_READY;
}
}
//
// Search DriverList for items to place on Scheduled Queue
//
ReadyToRun = FALSE;
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
DriverEntry = CR (Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);
if (DriverEntry->DepexProtocolError){
//
// If Section Extraction Protocol did not let the Depex be read before retry the read
//
Status = SmmGetDepexSectionAndPreProccess (DriverEntry);
}
if (DriverEntry->Dependent) {
if (SmmIsSchedulable (DriverEntry)) {
SmmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);
ReadyToRun = TRUE;
}
}
}
} while (ReadyToRun);
//
// If there is no more SMM driver to dispatch, stop the dispatch request
//
gRequestDispatch = FALSE;
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
DriverEntry = CR (Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);
if (!DriverEntry->Initialized){
//
// We have SMM driver pending to dispatch
//
gRequestDispatch = TRUE;
break;
}
}
gDispatcherRunning = FALSE;
return EFI_SUCCESS;
}
/**
This is the main Dispatcher for SMM and it exits when there are no more
drivers to run. Drain the mScheduledQueue and load and start a PE
image for each driver. Search the mDiscoveredList to see if any driver can
be placed on the mScheduledQueue. If no drivers are placed on the
mScheduledQueue exit the function. On exit it is assumed the Bds()
will be called, and when the Bds() exits the Dispatcher will be called
again.
@retval EFI_ALREADY_STARTED The SMM Dispatcher is already running
@retval EFI_NOT_FOUND No SMM Drivers were dispatched
@retval EFI_SUCCESS One or more SMM Drivers were dispatched
**/
EFI_STATUS
SmmDispatcher (
VOID
)
{
EFI_STATUS Status;
EFI_STATUS ReturnStatus;
LIST_ENTRY *Link;
EFI_SMM_DRIVER_ENTRY *DriverEntry;
BOOLEAN ReadyToRun;
if (!gRequestDispatch) {
return EFI_NOT_FOUND;
}
if (gDispatcherRunning) {
//
// If the dispatcher is running don't let it be restarted.
//
return EFI_ALREADY_STARTED;
}
gDispatcherRunning = TRUE;
ReturnStatus = EFI_NOT_FOUND;
do {
//
// Drain the Scheduled Queue
//
while (!IsListEmpty (&mScheduledQueue)) {
DriverEntry = CR (
mScheduledQueue.ForwardLink,
EFI_SMM_DRIVER_ENTRY,
ScheduledLink,
EFI_SMM_DRIVER_ENTRY_SIGNATURE
);
//
// Load the SMM Driver image into memory. If the Driver was transitioned from
// Untrused to Scheduled it would have already been loaded so we may need to
// skip the LoadImage
//
if (DriverEntry->ImageHandle == NULL) {
Status = SmmLoadImage (DriverEntry);
//
// Update the driver state to reflect that it's been loaded
//
if (EFI_ERROR (Status)) {
if (Status == EFI_SECURITY_VIOLATION) {
//
// Take driver from Scheduled to Untrused state
//
DriverEntry->Untrusted = TRUE;
} else {
//
// The SMM Driver could not be loaded, and do not attempt to load or start it again.
// Take driver from Scheduled to Initialized.
//
// This case include the Never Trusted state if EFI_ACCESS_DENIED is returned
//
DriverEntry->Initialized = TRUE;
}
DriverEntry->Scheduled = FALSE;
RemoveEntryList (&DriverEntry->ScheduledLink);
//
// If it's an error don't try the StartImage
//
continue;
}
}
DriverEntry->Scheduled = FALSE;
DriverEntry->Initialized = TRUE;
RemoveEntryList (&DriverEntry->ScheduledLink);
REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
EFI_PROGRESS_CODE,
EFI_SOFTWARE_SMM_DRIVER | EFI_SW_PC_INIT_BEGIN,
&DriverEntry->ImageHandle,
sizeof (DriverEntry->ImageHandle)
);
//
// For each SMM driver, pass NULL as ImageHandle
//
Status = ((EFI_IMAGE_ENTRY_POINT)(UINTN)DriverEntry->ImageEntryPoint)(DriverEntry->ImageHandle, gST);
if (EFI_ERROR(Status)){
SmmFreePages(DriverEntry->ImageBuffer, DriverEntry->NumberOfPage);
}
REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
EFI_PROGRESS_CODE,
EFI_SOFTWARE_SMM_DRIVER | EFI_SW_PC_INIT_END,
&DriverEntry->ImageHandle,
sizeof (DriverEntry->ImageHandle)
);
ReturnStatus = EFI_SUCCESS;
}
//
// Search DriverList for items to place on Scheduled Queue
//
ReadyToRun = FALSE;
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
DriverEntry = CR (Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);
if (DriverEntry->DepexProtocolError){
//
// If Section Extraction Protocol did not let the Depex be read before retry the read
//
Status = SmmGetDepexSectionAndPreProccess (DriverEntry);
}
if (DriverEntry->Dependent) {
if (SmmIsSchedulable (DriverEntry)) {
SmmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);
ReadyToRun = TRUE;
}
}
}
} while (ReadyToRun);
//
// If there is no more SMM driver to dispatch, stop the dispatch request
//
gRequestDispatch = FALSE;
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
DriverEntry = CR (Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);
if (!DriverEntry->Initialized){
//
// We have SMM driver pending to dispatch
//
gRequestDispatch = TRUE;
break;
}
}
gDispatcherRunning = FALSE;
return ReturnStatus;
}
/**
Submits the I/O and memory resource requirements for the specified PCI Host Bridge.
@param PciResAlloc Point to protocol instance of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL.
@retval EFI_SUCCESS Successfully finished resource allocation.
@retval EFI_NOT_FOUND Cannot get root bridge instance.
@retval EFI_OUT_OF_RESOURCES Platform failed to program the resources if no hot plug supported.
@retval other Some error occurred when allocating resources for the PCI Host Bridge.
@note Feature flag PcdPciBusHotplugDeviceSupport determine whether need support hotplug.
**/
EFI_STATUS
PciHostBridgeResourceAllocator (
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *PciResAlloc
)
{
PCI_IO_DEVICE *RootBridgeDev;
EFI_HANDLE RootBridgeHandle;
VOID *AcpiConfig;
EFI_STATUS Status;
UINT64 IoBase;
UINT64 Mem32Base;
UINT64 PMem32Base;
UINT64 Mem64Base;
UINT64 PMem64Base;
UINT64 IoResStatus;
UINT64 Mem32ResStatus;
UINT64 PMem32ResStatus;
UINT64 Mem64ResStatus;
UINT64 PMem64ResStatus;
UINT64 MaxOptionRomSize;
PCI_RESOURCE_NODE *IoBridge;
PCI_RESOURCE_NODE *Mem32Bridge;
PCI_RESOURCE_NODE *PMem32Bridge;
PCI_RESOURCE_NODE *Mem64Bridge;
PCI_RESOURCE_NODE *PMem64Bridge;
PCI_RESOURCE_NODE IoPool;
PCI_RESOURCE_NODE Mem32Pool;
PCI_RESOURCE_NODE PMem32Pool;
PCI_RESOURCE_NODE Mem64Pool;
PCI_RESOURCE_NODE PMem64Pool;
BOOLEAN ReAllocate;
EFI_DEVICE_HANDLE_EXTENDED_DATA_PAYLOAD HandleExtendedData;
EFI_RESOURCE_ALLOC_FAILURE_ERROR_DATA_PAYLOAD AllocFailExtendedData;
//
// Reallocate flag
//
ReAllocate = FALSE;
//
// It may try several times if the resource allocation fails
//
while (TRUE) {
//
// Initialize resource pool
//
InitializeResourcePool (&IoPool, PciBarTypeIo16);
InitializeResourcePool (&Mem32Pool, PciBarTypeMem32);
InitializeResourcePool (&PMem32Pool, PciBarTypePMem32);
InitializeResourcePool (&Mem64Pool, PciBarTypeMem64);
InitializeResourcePool (&PMem64Pool, PciBarTypePMem64);
RootBridgeDev = NULL;
RootBridgeHandle = 0;
while (PciResAlloc->GetNextRootBridge (PciResAlloc, &RootBridgeHandle) == EFI_SUCCESS) {
//
// Get Root Bridge Device by handle
//
RootBridgeDev = GetRootBridgeByHandle (RootBridgeHandle);
if (RootBridgeDev == NULL) {
return EFI_NOT_FOUND;
}
//
// Create the entire system resource map from the information collected by
// enumerator. Several resource tree was created
//
//
// If non-stardard PCI Bridge I/O window alignment is supported,
// set I/O aligment to minimum possible alignment for root bridge.
//
IoBridge = CreateResourceNode (
RootBridgeDev,
0,
FeaturePcdGet (PcdPciBridgeIoAlignmentProbe) ? 0x1FF: 0xFFF,
RB_IO_RANGE,
PciBarTypeIo16,
PciResUsageTypical
);
Mem32Bridge = CreateResourceNode (
RootBridgeDev,
0,
0xFFFFF,
RB_MEM32_RANGE,
PciBarTypeMem32,
PciResUsageTypical
);
PMem32Bridge = CreateResourceNode (
RootBridgeDev,
0,
0xFFFFF,
RB_PMEM32_RANGE,
PciBarTypePMem32,
PciResUsageTypical
);
Mem64Bridge = CreateResourceNode (
RootBridgeDev,
0,
0xFFFFF,
RB_MEM64_RANGE,
PciBarTypeMem64,
PciResUsageTypical
);
PMem64Bridge = CreateResourceNode (
RootBridgeDev,
0,
0xFFFFF,
RB_PMEM64_RANGE,
PciBarTypePMem64,
PciResUsageTypical
);
//
// Create resourcemap by going through all the devices subject to this root bridge
//
CreateResourceMap (
RootBridgeDev,
IoBridge,
Mem32Bridge,
PMem32Bridge,
Mem64Bridge,
PMem64Bridge
);
//
// Get the max ROM size that the root bridge can process
//
RootBridgeDev->RomSize = Mem32Bridge->Length;
//
// Skip to enlarge the resource request during realloction
//
if (!ReAllocate) {
//
// Get Max Option Rom size for current root bridge
//
MaxOptionRomSize = GetMaxOptionRomSize (RootBridgeDev);
//
// Enlarger the mem32 resource to accomdate the option rom
// if the mem32 resource is not enough to hold the rom
//
if (MaxOptionRomSize > Mem32Bridge->Length) {
Mem32Bridge->Length = MaxOptionRomSize;
RootBridgeDev->RomSize = MaxOptionRomSize;
//
// Alignment should be adjusted as well
//
if (Mem32Bridge->Alignment < MaxOptionRomSize - 1) {
Mem32Bridge->Alignment = MaxOptionRomSize - 1;
}
}
}
//
// Based on the all the resource tree, contruct ACPI resource node to
// submit the resource aperture to pci host bridge protocol
//
Status = ConstructAcpiResourceRequestor (
RootBridgeDev,
IoBridge,
Mem32Bridge,
PMem32Bridge,
Mem64Bridge,
PMem64Bridge,
&AcpiConfig
);
//
// Insert these resource nodes into the database
//
InsertResourceNode (&IoPool, IoBridge);
InsertResourceNode (&Mem32Pool, Mem32Bridge);
InsertResourceNode (&PMem32Pool, PMem32Bridge);
InsertResourceNode (&Mem64Pool, Mem64Bridge);
InsertResourceNode (&PMem64Pool, PMem64Bridge);
if (Status == EFI_SUCCESS) {
//
// Submit the resource requirement
//
Status = PciResAlloc->SubmitResources (
PciResAlloc,
RootBridgeDev->Handle,
AcpiConfig
);
//
// If SubmitResources returns error, PciBus isn't able to start.
// It's a fatal error so assertion is added.
//
DEBUG ((EFI_D_INFO, "PciBus: HostBridge->SubmitResources() - %r\n", Status));
ASSERT_EFI_ERROR (Status);
}
//
// Free acpi resource node
//
if (AcpiConfig != NULL) {
FreePool (AcpiConfig);
}
if (EFI_ERROR (Status)) {
//
// Destroy all the resource tree
//
DestroyResourceTree (&IoPool);
DestroyResourceTree (&Mem32Pool);
DestroyResourceTree (&PMem32Pool);
DestroyResourceTree (&Mem64Pool);
DestroyResourceTree (&PMem64Pool);
return Status;
}
}
//
// End while, at least one Root Bridge should be found.
//
ASSERT (RootBridgeDev != NULL);
//
// Notify platform to start to program the resource
//
Status = NotifyPhase (PciResAlloc, EfiPciHostBridgeAllocateResources);
DEBUG ((EFI_D_INFO, "PciBus: HostBridge->NotifyPhase(AllocateResources) - %r\n", Status));
if (!FeaturePcdGet (PcdPciBusHotplugDeviceSupport)) {
//
// If Hot Plug is not supported
//
if (EFI_ERROR (Status)) {
//
// Allocation failed, then return
//
return EFI_OUT_OF_RESOURCES;
}
//
// Allocation succeed.
// Get host bridge handle for status report, and then skip the main while
//
HandleExtendedData.Handle = RootBridgeDev->PciRootBridgeIo->ParentHandle;
break;
} else {
//
// If Hot Plug is supported
//
if (!EFI_ERROR (Status)) {
//
// Allocation succeed, then continue the following
//
break;
}
//
// If the resource allocation is unsuccessful, free resources on bridge
//
RootBridgeDev = NULL;
RootBridgeHandle = 0;
IoResStatus = EFI_RESOURCE_SATISFIED;
Mem32ResStatus = EFI_RESOURCE_SATISFIED;
PMem32ResStatus = EFI_RESOURCE_SATISFIED;
Mem64ResStatus = EFI_RESOURCE_SATISFIED;
PMem64ResStatus = EFI_RESOURCE_SATISFIED;
while (PciResAlloc->GetNextRootBridge (PciResAlloc, &RootBridgeHandle) == EFI_SUCCESS) {
//
// Get RootBridg Device by handle
//
RootBridgeDev = GetRootBridgeByHandle (RootBridgeHandle);
if (RootBridgeDev == NULL) {
return EFI_NOT_FOUND;
}
//
// Get host bridge handle for status report
//
HandleExtendedData.Handle = RootBridgeDev->PciRootBridgeIo->ParentHandle;
//
// Get acpi resource node for all the resource types
//
AcpiConfig = NULL;
Status = PciResAlloc->GetProposedResources (
PciResAlloc,
RootBridgeDev->Handle,
&AcpiConfig
);
if (EFI_ERROR (Status)) {
return Status;
}
if (AcpiConfig != NULL) {
//
// Adjust resource allocation policy for each RB
//
GetResourceAllocationStatus (
AcpiConfig,
&IoResStatus,
&Mem32ResStatus,
&PMem32ResStatus,
&Mem64ResStatus,
&PMem64ResStatus
);
FreePool (AcpiConfig);
}
}
//
// End while
//
//
// Raise the EFI_IOB_EC_RESOURCE_CONFLICT status code
//
//
// It is very difficult to follow the spec here
// Device path , Bar index can not be get here
//
ZeroMem (&AllocFailExtendedData, sizeof (AllocFailExtendedData));
REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
EFI_PROGRESS_CODE,
EFI_IO_BUS_PCI | EFI_IOB_EC_RESOURCE_CONFLICT,
(VOID *) &AllocFailExtendedData,
sizeof (AllocFailExtendedData)
);
Status = PciHostBridgeAdjustAllocation (
&IoPool,
&Mem32Pool,
&PMem32Pool,
&Mem64Pool,
&PMem64Pool,
IoResStatus,
Mem32ResStatus,
PMem32ResStatus,
Mem64ResStatus,
PMem64ResStatus
);
//
// Destroy all the resource tree
//
DestroyResourceTree (&IoPool);
DestroyResourceTree (&Mem32Pool);
DestroyResourceTree (&PMem32Pool);
DestroyResourceTree (&Mem64Pool);
DestroyResourceTree (&PMem64Pool);
NotifyPhase (PciResAlloc, EfiPciHostBridgeFreeResources);
if (EFI_ERROR (Status)) {
return Status;
}
ReAllocate = TRUE;
}
}
//
// End main while
//
//
// Raise the EFI_IOB_PCI_RES_ALLOC status code
//
REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
EFI_PROGRESS_CODE,
EFI_IO_BUS_PCI | EFI_IOB_PCI_RES_ALLOC,
(VOID *) &HandleExtendedData,
sizeof (HandleExtendedData)
);
//
// Notify pci bus driver starts to program the resource
//
Status = NotifyPhase (PciResAlloc, EfiPciHostBridgeSetResources);
if (EFI_ERROR (Status)) {
return Status;
}
RootBridgeDev = NULL;
RootBridgeHandle = 0;
while (PciResAlloc->GetNextRootBridge (PciResAlloc, &RootBridgeHandle) == EFI_SUCCESS) {
//
// Get RootBridg Device by handle
//
RootBridgeDev = GetRootBridgeByHandle (RootBridgeHandle);
if (RootBridgeDev == NULL) {
return EFI_NOT_FOUND;
}
//
// Get acpi resource node for all the resource types
//
AcpiConfig = NULL;
Status = PciResAlloc->GetProposedResources (
PciResAlloc,
RootBridgeDev->Handle,
&AcpiConfig
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Get the resource base by interpreting acpi resource node
//
//
GetResourceBase (
AcpiConfig,
&IoBase,
&Mem32Base,
&PMem32Base,
&Mem64Base,
&PMem64Base
);
//
// Process option rom for this root bridge
//
ProcessOptionRom (RootBridgeDev, Mem32Base, RootBridgeDev->RomSize);
//
// Create the entire system resource map from the information collected by
// enumerator. Several resource tree was created
//
IoBridge = FindResourceNode (RootBridgeDev, &IoPool);
Mem32Bridge = FindResourceNode (RootBridgeDev, &Mem32Pool);
PMem32Bridge = FindResourceNode (RootBridgeDev, &PMem32Pool);
Mem64Bridge = FindResourceNode (RootBridgeDev, &Mem64Pool);
PMem64Bridge = FindResourceNode (RootBridgeDev, &PMem64Pool);
ASSERT (IoBridge != NULL);
ASSERT (Mem32Bridge != NULL);
ASSERT (PMem32Bridge != NULL);
ASSERT (Mem64Bridge != NULL);
ASSERT (PMem64Bridge != NULL);
//
// Program IO resources
//
ProgramResource (
IoBase,
IoBridge
);
//
// Program Mem32 resources
//
ProgramResource (
Mem32Base,
Mem32Bridge
);
//
// Program PMem32 resources
//
ProgramResource (
PMem32Base,
PMem32Bridge
);
//
// Program Mem64 resources
//
ProgramResource (
Mem64Base,
Mem64Bridge
);
//
// Program PMem64 resources
//
ProgramResource (
PMem64Base,
PMem64Bridge
);
IoBridge ->PciDev->PciBar[IoBridge ->Bar].BaseAddress = IoBase;
Mem32Bridge ->PciDev->PciBar[Mem32Bridge ->Bar].BaseAddress = Mem32Base;
PMem32Bridge->PciDev->PciBar[PMem32Bridge->Bar].BaseAddress = PMem32Base;
Mem64Bridge ->PciDev->PciBar[Mem64Bridge ->Bar].BaseAddress = Mem64Base;
PMem64Bridge->PciDev->PciBar[PMem64Bridge->Bar].BaseAddress = PMem64Base;
//
// Dump the resource map for current root bridge
//
DEBUG_CODE (
DumpResourceMap (
RootBridgeDev,
IoBridge,
Mem32Bridge,
PMem32Bridge,
Mem64Bridge,
PMem64Bridge
);
);
FreePool (AcpiConfig);
}
