rt_uint8_t battery_adc_initialize(void)
{
ROM_SysCtlADCSpeedSet(SYSCTL_ADCSPEED_1MSPS);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_ADC0);
ROM_ADCHardwareOversampleConfigure(ADC0_BASE,64);
ROM_GPIOPinTypeADC(GPIO_PORTE_BASE, GPIO_PIN_2);
ADCSequenceConfigure(ADC0_BASE, 3,ADC_TRIGGER_PROCESSOR, 0);
ROM_ADCSequenceStepConfigure(ADC0_BASE,3, 0, ADC_CTL_CH1| ADC_CTL_IE |ADC_CTL_END);
ROM_ADCSequenceEnable(ADC0_BASE, 3);
rt_kprintf("battery_adc_initialize\n");
return 0;
}
//*****************************************************************************
//
// Initializes the ADC.
//
//*****************************************************************************
void
ADCInit(void)
{
//
// Set the ADC speed to 1 Msps.
//
ROM_SysCtlADCSpeedSet(SYSCTL_ADCSPEED_1MSPS);
//
// Configure the GPIOs used with the analog inputs.
//
GPIOPinTypeADC(ADC_POSITION_PORT, ADC_POSITION_PIN);
GPIOPinTypeADC(ADC_CURRENT_PORT, ADC_CURRENT_PIN);
GPIOPinTypeADC(ADC_VBUS_PORT, ADC_VBUS_PIN);
GPIOPinTypeADC(ADC_VBOOTA_PORT, ADC_VBOOTA_PIN);
GPIOPinTypeADC(ADC_VBOOTB_PORT, ADC_VBOOTB_PIN);
//
// Configure the ADC sample sequence that is triggered by PWM
// generator 2
//
ROM_ADCSequenceConfigure(ADC0_BASE, 0, ADC_TRIGGER_PWM0, 0);
ROM_ADCSequenceStepConfigure(ADC0_BASE, 0, 0, ADC_CURRENT_CH);
ROM_ADCSequenceStepConfigure(ADC0_BASE, 0, 1, ADC_VBUS_CH);
ROM_ADCSequenceStepConfigure(ADC0_BASE, 0, 2, ADC_POSITION_CH);
ROM_ADCSequenceStepConfigure(ADC0_BASE, 0, 3,
(ADC_CTL_TS | ADC_CTL_IE | ADC_CTL_END));
ROM_ADCSequenceEnable(ADC0_BASE, 0);
//
// Enable interrupts
//
ROM_ADCIntEnable(ADC0_BASE, 0);
ROM_IntEnable(INT_ADC0SS0);
//
// Set the zero current to indicate that the initial sampling has just
// begun.
//
g_usCurrentZero = 0xffff;
}
//*****************************************************************************
//
// This function initializes the ADC hardware in preparation for data
// acquisition.
//
//*****************************************************************************
void
AcquireInit(void)
{
unsigned long ulChan;
//
// Enable the ADC peripherals and the associated GPIO port
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_ADC0);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOP);
ROM_SysCtlADCSpeedSet(SYSCTL_ADCSPEED_125KSPS);
ROM_GPIOPinTypeADC(GPIO_PORTE_BASE, GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 |GPIO_PIN_7 | GPIO_PIN_3);
ROM_GPIOPinTypeADC(GPIO_PORTP_BASE, GPIO_PIN_0);
// ROM_ADCReferenceSet(ADC0_BASE, ADC_REF_EXT_3V);
//ROM_ADCR
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
HWREG(GPIO_PORTB_BASE + GPIO_O_AMSEL) |= GPIO_PIN_6;
ADCSequenceDisable(ADC0_BASE,SEQUENCER);
ROM_ADCSequenceConfigure(ADC0_BASE, SEQUENCER, ADC_TRIGGER_TIMER, 0);
for(ulChan = 0; ulChan < 2; ulChan++)
{
unsigned long ulChCtl;
if (ulChan ==1)
{
ROM_ADCSequenceStepConfigure(ADC0_BASE, SEQUENCER, ulChan, ADC_CTL_CH1|ADC_CTL_IE | ADC_CTL_END);
}
else if(ulChan==0)
{
ulChCtl = ADC_CTL_CH0;
ROM_ADCSequenceStepConfigure(ADC0_BASE, SEQUENCER, ulChan, ADC_CTL_CH0);
}
}
ADCHardwareOversampleConfigure(ADC0_BASE, 1);
SysCtlPeripheralEnable(SYSCTL_PERIPH_TIMER0);
//SysCtlPeripheralEnable(SYSCTL_PERIPH_TIMER1);
ROM_TimerConfigure(TIMER0_BASE,TIMER_CFG_32_BIT_PER );
//100 micro
unsigned long freq=SAMPLING_FREQUENCY;
unsigned long period=(2*ROM_SysCtlClockGet()/(freq));
ROM_TimerLoadSet(TIMER0_BASE, TIMER_A,period);
ROM_TimerControlTrigger(TIMER0_BASE, TIMER_A, true);
//ROM_TimerConfigure(TIMER1_BASE, TIMER_CFG_PERIODIC);
//ROM_TimerLoadSet(TIMER1_BASE, TIMER_A, ROM_SysCtlClockGet() /2);
CFAL96x64x16Init();
GrContextInit(&sDisplayContext, &g_sCFAL96x64x16);
sRect1.sXMin = 0;
sRect1.sYMin = 0;
sRect1.sXMax = GrContextDpyWidthGet(&sDisplayContext) - 1;
sRect1.sYMax = 23;
sRect2.sXMin = 0;
sRect2.sYMin = 23;
sRect2.sXMax = GrContextDpyWidthGet(&sDisplayContext) - 1;
sRect2.sYMax = GrContextDpyHeightGet(&sDisplayContext) - 1;
snprintf(text,sizeof(text),"STart");
GrContextForegroundSet(&sDisplayContext, ClrDarkBlue);
GrRectFill(&sDisplayContext, &sRect1);
GrContextForegroundSet(&sDisplayContext, ClrWhite);
//GrRectDraw(&sDisplayContext, &sRect1);
GrContextFontSet(&sDisplayContext, g_pFontCm12);
GrStringDrawCentered(&sDisplayContext,text, -1,
GrContextDpyWidthGet(&sDisplayContext) / 2, 10, 0);
//GrContextForegroundSet(&sDisplayContext, ClrDarkBlue);
//GrRectFill(&sDisplayContext, &sRect1);
//GrContextForegroundSet(&sDisplayContext, ClrWhite);
//GrRectDraw(&sDisplayContext, &sRect1);
/*GrContextForegroundSet(&sDisplayContext, ClrDarkBlue);
GrRectFill(&sDisplayContext, &sRect2);
GrContextForegroundSet(&sDisplayContext, ClrWhite);
GrRectDraw(&sDisplayContext, &sRect2);
*/
compute_filter();
maxi1=0;
maxi2=0;
max1=0;
max2=0;
res=0;
res1=0;
g_ulADCCount=0;
buffer_index=0;
ulLastADCCount=0;
}
