/*
** RTC configuration function
*/
static void RTCSetupAndEnable(void)
{
/* Performing the System Clock configuration for RTC. */
RTCModuleClkConfig();
/* Disabling Write Protection for RTC registers.*/
RTCWriteProtectDisable(SOC_RTC_0_REGS);
/* Selecting Internal Clock source for RTC. */
RTC32KClkSourceSelect(SOC_RTC_0_REGS, RTC_INTERNAL_CLK_SRC_SELECT);
/* Enabling RTC to receive the Clock inputs. */
RTC32KClkClockControl(SOC_RTC_0_REGS, RTC_32KCLK_ENABLE);
/* Enable the RTC module. */
RTCEnable(SOC_RTC_0_REGS);
/* Dummy: Programming calendar information in the Calendar registers. */
RTCCalendarSet(SOC_RTC_0_REGS, 0x29111000 | RTC_DOTW_MON);
/* Dummy: Programming the time information in the Time registers. */
RTCTimeSet(SOC_RTC_0_REGS, (0x08473100 | RTC_ANTE_MERIDIEM));
/* Set the 32KHz counter to run. */
RTCRun(SOC_RTC_0_REGS);
/* Enabling RTC interrupts. Configuring RTC to interrupt every second.*/
RTCIntTimerEnable(SOC_RTC_0_REGS, RTC_INT_EVERY_SECOND);
/* Enabling the system interrupt in AINTC for RTC. */
IntSystemEnable(SYS_INT_RTCINT);
}
/*
** RTC configuration function
*/
static void RTCSetupAndEnable(void)
{
/* Performing the System Clock configuration for RTC. */
RTCModuleClkConfig();
/* Disabling Write Protection for RTC registers.*/
RTCWriteProtectDisable(RTC_INST_BASE);
/* Selecting Internal Clock source for RTC. */
RTC32KClkSourceSelect(RTC_INST_BASE, RTC_INTERNAL_CLK_SRC_SELECT);
/* Enabling RTC to receive the Clock inputs. */
RTC32KClkClockControl(RTC_INST_BASE, RTC_32KCLK_ENABLE);
/* Enable the RTC module. */
RTCEnable(RTC_INST_BASE);
/* Dummy: Programming calendar information in the Calendar registers. */
RTCCalendarSet(RTC_INST_BASE, RTC_CAL_VAL_DUMMY);
/* Dummy: Programming the time information in the Time registers. */
RTCTimeSet(RTC_INST_BASE, RTC_TIME_VAL_DUMMY);
/* Set the 32KHz counter to run. */
RTCRun(RTC_INST_BASE);
/* Enabling RTC interrupts. Configuring RTC to interrupt every second.*/
RTCIntTimerEnable(RTC_INST_BASE, RTC_INT_EVERY_SECOND);
/* Enabling the system interrupt in AINTC for RTC. */
IntSystemEnable(RTC_INT_NUM);
}
/*
** Enable all the peripherals in use
*/
static void PeripheralsSetUp(void)
{
DMTimer2ModuleClkConfig();
DMTimer3ModuleClkConfig();
DMTimer4ModuleClkConfig();
RTCModuleClkConfig();
CPSWPinMuxSetup();
CPSWClkEnable();
EDMAModuleClkConfig();
GPIO1ModuleClkConfig();
GPIO1Pin23PinMuxSetup();
HSMMCSDPinMuxSetup();
HSMMCSDModuleClkConfig();
}
/*
** Enable all the peripherals in use
*/
static void PeripheralsSetUp(void)
{
enableModuleClock(CLK_UART0);
enableModuleClock(CLK_I2C0);
/* Timer6 is used for Standby wakeup */
enableModuleClock(CLK_TIMER6);
GPIO0ModuleClkConfig();
DMTimer2ModuleClkConfig();
DMTimer3ModuleClkConfig();
DMTimer4ModuleClkConfig();
RTCModuleClkConfig();
CPSWPinMuxSetup();
CPSWClkEnable();
EDMAModuleClkConfig();
GPIO1ModuleClkConfig();
GPIO1Pin23PinMuxSetup();
HSMMCSDPinMuxSetup();
HSMMCSDModuleClkConfig();
I2CPinMuxSetup(0);
}
