Esempi in C++ (Cpp) per RTMP_SET_PACKET_NET_DEVICE_MBSSID

Esempio n. 1

File: ap_mbss.c Progetto: schidler/flyzjhz-rt-n56u

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
	pPktSrc			points to our adapter
	pDev			which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_PacketSend(
	IN PNDIS_PACKET		pPktSrc, 
	IN PNET_DEV		pDev)
{
	RTMP_ADAPTER     *pAd;
	MULTISSID_STRUCT *pMbss;
	PNDIS_PACKET     pPkt = (PNDIS_PACKET)pPktSrc;
	INT              IdBss;

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	ASSERT(pAd);

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
	{
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}
#endif // RALINK_ATE //

	if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))          ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
	{
		/* wlan is scanning/disabled/reset */
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}

	if(!(RTMP_OS_NETDEV_STATE_RUNNING(pDev)))
	{
		/* the interface is down */
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}

	/* 0 is main BSS, dont handle it here */
	/* FIRST_MBSSID = 1 */
	pMbss = pAd->ApCfg.MBSSID;

	for(IdBss=FIRST_MBSSID; IdBss<pAd->ApCfg.BssidNum; IdBss++)
	{
		/* find the device in our MBSS list */
		if (pMbss[IdBss].MSSIDDev == pDev)
		{
			NdisZeroMemory((PUCHAR)&(RTPKT_TO_OSPKT(pPktSrc))->cb[CB_OFF], 15);
			RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPktSrc, IdBss);
//			SET_OS_PKT_NETDEV(pPktSrc, pDev); /* MBSS used original interface for TX */
			
			/* transmit the packet */
			return rt28xx_packet_xmit(pPktSrc);
		}
	}

	/* can not find the BSS so discard the packet */
	RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);

	return 0;
} /* End of MBSS_VirtualIF_PacketSend */

Esempio n. 2

File: ap_mbss.c Progetto: derekcentrico/m6.kernel.3.x

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
	pPktSrc			points to our adapter
	pDev			which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
int MBSS_PacketSend(
	IN	PNDIS_PACKET				pPktSrc, 
	IN	PNET_DEV					pDev,
	IN	RTMP_NET_PACKET_TRANSMIT	Func)
{
    RTMP_ADAPTER     *pAd;
    MULTISSID_STRUCT *pMbss;
    PNDIS_PACKET     pPkt = (PNDIS_PACKET)pPktSrc;
    int              IdBss;


	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	ASSERT(pAd);

#ifdef RALINK_ATE
    if (ATE_ON(pAd))
    {
        RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
        return 0;
    }
#endif /* RALINK_ATE */

	if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))          ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
	{
		/* wlan is scanning/disabled/reset */
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}


    /* 0 is main BSS, dont handle it here */
    /* FIRST_MBSSID = 1 */
    pMbss = pAd->ApCfg.MBSSID;

    for(IdBss=FIRST_MBSSID; IdBss<pAd->ApCfg.BssidNum; IdBss++)
    {
	/* find the device in our MBSS list */
	if (pMbss[IdBss].MSSIDDev == pDev)
	{
/*			NdisZeroMemory((PUCHAR)&(RTPKT_TO_OSPKT(pPktSrc))->cb[CB_OFF], 15); */
			NdisZeroMemory((PUCHAR)(GET_OS_PKT_CB(pPktSrc) + CB_OFF), 15);
            RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPktSrc, IdBss);
/*			SET_OS_PKT_NETDEV(pPktSrc, pDev); */
		 

            /* transmit the packet */
            return Func(pPktSrc);
		}
	}

    /* can not find the BSS so discard the packet */
	RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);

    return 0;
}

Esempio n. 3

File: rt_main_dev.c Progetto: mikuhatsune001/linux2.6.32

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
    skb_p           points to our adapter
    dev_p           which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
static int rt28xx_send_packets(
	IN struct sk_buff		*skb_p,
	IN struct net_device	*net_dev)
{
	RTMP_ADAPTER *pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);

	if (!(net_dev->flags & IFF_UP))
	{
		RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
		return 0;
	}

	NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
	RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);

	return rt28xx_packet_xmit(skb_p);
}

Esempio n. 4

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
    skb_p           points to our adapter
    dev_p           which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
static int rt28xx_send_packets(IN struct sk_buff *skb_p,
			       IN struct net_device *net_dev)
{
	struct rt_rtmp_adapter *pAd = NULL;

	GET_PAD_FROM_NET_DEV(pAd, net_dev);

	if (!(net_dev->flags & IFF_UP)) {
		RELEASE_NDIS_PACKET(pAd, (void *)skb_p,
				    NDIS_STATUS_FAILURE);
		return NETDEV_TX_OK;
	}

	NdisZeroMemory((u8 *)& skb_p->cb[CB_OFF], 15);
	RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);

	return rt28xx_packet_xmit(skb_p);
}

Esempio n. 5

File: cfg80211_inf.c Progetto: pierce1234/rt-n56u

static INT CFG80211_PacketSend(PNDIS_PACKET pPktSrc, PNET_DEV pDev, RTMP_NET_PACKET_TRANSMIT Func)
{
    	PRTMP_ADAPTER pAd;
    	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
    	ASSERT(pAd);

	/* To Indicate from Which VIF */
	switch (pDev->ieee80211_ptr->iftype)
	{
		case RT_CMD_80211_IFTYPE_AP:
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_AP;
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;

		case RT_CMD_80211_IFTYPE_P2P_GO:;
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_P2P_GO;
			if(!OPSTATUS_TEST_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED)) 
			{
			        DBGPRINT(RT_DEBUG_TRACE, ("Drop the Packet due P2P GO not in ready state\n"));
			        RELEASE_NDIS_PACKET(pAd, pPktSrc, NDIS_STATUS_FAILURE);
				return 0;
			}
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;	

		case RT_CMD_80211_IFTYPE_P2P_CLIENT:
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_P2P_CLI;
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;				

		case RT_CMD_80211_IFTYPE_STATION:
		default:
			DBGPRINT(RT_DEBUG_TRACE, ("Unknown CFG80211 I/F Type(%d)\n", pDev->ieee80211_ptr->iftype));	
			RELEASE_NDIS_PACKET(pAd, pPktSrc, NDIS_STATUS_FAILURE);
			return 0;
	}	

	DBGPRINT(RT_DEBUG_INFO, ("CFG80211 Packet Type  [%s](%d)\n", 
					pDev->name, pDev->ieee80211_ptr->iftype));

	RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPktSrc, MAIN_MBSSID);
	
	return Func(RTPKT_TO_OSPKT(pPktSrc));
}

Esempio n. 6

File: cfg80211_inf.c Progetto: ulli-kroll/mt7612u

static INT CFG80211_PacketSend(struct sk_buff *pPktSrc, struct net_device *pDev, RTMP_NET_PACKET_TRANSMIT Func)
{
    	struct rtmp_adapter *pAd;
    	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
    	ASSERT(pAd);

	/* To Indicate from Which VIF */
	switch (pDev->ieee80211_ptr->iftype)
	{
		case RT_CMD_80211_IFTYPE_AP:
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_AP;
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;

		case RT_CMD_80211_IFTYPE_P2P_GO:;
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_P2P_GO;
			if(!OPSTATUS_TEST_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED))
			{
			        DBGPRINT(RT_DEBUG_TRACE, ("Drop the Packet due P2P GO not in ready state\n"));
			        dev_kfree_skb_any(pPktSrc);
				return 0;
			}
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;

		case RT_CMD_80211_IFTYPE_P2P_CLIENT:
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_P2P_CLI;
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;

		case RT_CMD_80211_IFTYPE_STATION:
		default:
			DBGPRINT(RT_DEBUG_TRACE, ("Unknown CFG80211 I/F Type(%d)\n", pDev->ieee80211_ptr->iftype));
			dev_kfree_skb_any(pPktSrc);
			return 0;
	}

	DBGPRINT(RT_DEBUG_INFO, ("CFG80211 Packet Type  [%s](%d)\n",
					pDev->name, pDev->ieee80211_ptr->iftype));

	RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPktSrc, MAIN_MBSSID);

	return Func(pPktSrc);
}

Esempio n. 7

File: rt_main_dev.c Progetto: jing-git/rt-n56u

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
    skb_p           points to our adapter
    dev_p           which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
static int rt28xx_send_packets(
	IN struct sk_buff 		*skb_p, 
	IN struct net_device 	*net_dev)
{
	RTMP_ADAPTER *pAd = NULL;

	GET_PAD_FROM_NET_DEV(pAd, net_dev);	

	if (!(RTMP_OS_NETDEV_STATE_RUNNING(net_dev)))
	{
		RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
		return 0;
	}

	NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
	RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);

	MEM_DBG_PKT_ALLOC_INC(pAd);

	return rt28xx_packet_xmit(skb_p);
}