void WinEDA_ModuleEditFrame::OnSelectOptionToolbar(wxCommandEvent& event) /***********************************************************************/ { int id = event.GetId(); wxClientDC dc(DrawPanel); DrawPanel->PrepareGraphicContext(&dc); switch ( id ) { case ID_TB_OPTIONS_SHOW_GRID: m_Draw_Grid = m_OptionsToolBar->GetToolState(id); DrawPanel->ReDraw(&dc, TRUE); break; case ID_TB_OPTIONS_SELECT_UNIT_MM: UnitMetric = MILLIMETRE; case ID_TB_OPTIONS_SELECT_UNIT_INCH: if ( id == ID_TB_OPTIONS_SELECT_UNIT_INCH ) UnitMetric = INCHES; Affiche_Status_Box(); /* Reaffichage des coord curseur */ ReCreateAuxiliaryToolbar(); break; case ID_TB_OPTIONS_SHOW_POLAR_COORD: Affiche_Message(wxEmptyString); DisplayOpt.DisplayPolarCood = m_OptionsToolBar->GetToolState(id); Affiche_Status_Box(); /* Reaffichage des coord curseur */ break; case ID_TB_OPTIONS_SELECT_CURSOR: GetScreen()->Trace_Curseur(DrawPanel, &dc); g_CursorShape = m_OptionsToolBar->GetToolState(id); GetScreen()->Trace_Curseur(DrawPanel, &dc); break; case ID_TB_OPTIONS_SHOW_PADS_SKETCH: m_DisplayPadFill = ! m_OptionsToolBar->GetToolState(id); DrawPanel->ReDraw(&dc, TRUE); break; case ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH: m_DisplayModText = m_OptionsToolBar->GetToolState(id) ? SKETCH : FILLED; DrawPanel->ReDraw(&dc, TRUE); break; case ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH: m_DisplayModEdge = m_OptionsToolBar->GetToolState(id) ? SKETCH : FILLED; DrawPanel->ReDraw(&dc, TRUE); break; default: DisplayError(this, wxT("WinEDA_ModuleEditFrame::OnSelectOptionToolbar error") ); break; } SetToolbars(); }
bool PCB_EDIT_FRAME::SetCurrentNetClass( const wxString& aNetClassName ) { bool change = GetDesignSettings().SetCurrentNetClass( aNetClassName ); if( change ) { ReCreateAuxiliaryToolbar(); } return change; }
void PCB_EDIT_FRAME::ShowDesignRulesEditor( wxCommandEvent& event ) { DIALOG_DESIGN_RULES dR_editor( this ); int returncode = dR_editor.ShowModal(); if( returncode == wxID_OK ) // New rules, or others changes. { ReCreateLayerBox(); ReCreateAuxiliaryToolbar(); OnModify(); } }
void PCB_BASE_FRAME::ShowChangedLanguage() { // call my base class EDA_DRAW_FRAME::ShowChangedLanguage(); // tooltips in toolbars ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); // status bar UpdateMsgPanel(); }
void PCB_BASE_FRAME::CommonSettingsChanged() { EDA_DRAW_FRAME::CommonSettingsChanged(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); EDA_3D_VIEWER* viewer = Get3DViewerFrame(); if( viewer ) { // The 3D viewer isn't in the Kiway, so send its update manually viewer->CommonSettingsChanged(); } }
WinEDA_ModuleEditFrame::WinEDA_ModuleEditFrame(wxWindow * father, WinEDA_App *parent, const wxString & title, const wxPoint& pos, const wxSize& size) : WinEDA_BasePcbFrame(father, parent, MODULE_EDITOR_FRAME, wxEmptyString, pos, size) { m_FrameName = wxT("ModEditFrame"); m_Draw_Axes = TRUE; // TRUE pour avoir les axes dessines m_Draw_Grid = TRUE; // TRUE pour avoir la axes dessinee m_Draw_Sheet_Ref = FALSE; // TRUE pour avoir le cartouche dessiné // Give an icon SetIcon(wxICON(icon_modedit)); SetTitle( wxT("Module Editor (lib: ") + m_CurrentLib + wxT(")") ); if ( ScreenModule == NULL ) { ScreenModule = new PCB_SCREEN(NULL, this, PCB_FRAME); ActiveScreen = ScreenModule; } ScreenModule->SetParentFrame(this); ScreenModule->m_UndoRedoCountMax = 10; if( g_ModuleEditor_Pcb == NULL ) g_ModuleEditor_Pcb = new BOARD(NULL, this); m_Pcb = g_ModuleEditor_Pcb; m_Pcb->m_PcbFrame = this; m_CurrentScreen = ScreenModule; GetScreen()->m_CurrentItem = NULL; GetSettings(); if ( m_Parent && m_Parent->m_EDA_Config ) { m_Parent->m_EDA_Config->Read( wxT("ModEditGrid_X"), &g_ModEditGrid.x, 500); m_Parent->m_EDA_Config->Read( wxT("ModEditGrid_Y"), &g_ModEditGrid.y, 500); } GetScreen()->SetGrid(g_ModEditGrid); SetSize(m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); }
void GERBVIEW_FRAME::ReFillLayerWidget() { m_LayersManager->ReFill(); m_SelLayerBox->Resync(); ReCreateAuxiliaryToolbar(); wxAuiPaneInfo& lyrs = m_auimgr.GetPane( m_LayersManager ); wxSize bestz = m_LayersManager->GetBestSize(); bestz.x += 5; // gives a little margin lyrs.MinSize( bestz ); lyrs.BestSize( bestz ); lyrs.FloatingSize( bestz ); if( lyrs.IsDocked() ) m_auimgr.Update(); else m_LayersManager->SetSize( bestz ); syncLayerWidget(); }
WinEDA_PcbFrame::WinEDA_PcbFrame(wxWindow * father, WinEDA_App *parent, const wxString & title, const wxPoint& pos, const wxSize& size) : WinEDA_BasePcbFrame(father, parent, PCB_FRAME, title, pos, size) { m_FrameName = wxT("PcbFrame"); m_Draw_Axes = TRUE; // TRUE pour avoir les axes dessines m_Draw_Grid = g_ShowGrid; // TRUE pour avoir la grille dessinee m_Draw_Sheet_Ref = TRUE; // TRUE pour avoir le cartouche dessiné m_Draw_Auxiliary_Axe = TRUE; m_SelTrackWidthBox = NULL; m_SelViaSizeBox = NULL; m_SelLayerBox = NULL; m_SelTrackWidthBox_Changed = FALSE; m_SelViaSizeBox_Changed = FALSE; m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill; m_DisplayPadFill = DisplayOpt.DisplayPadFill; m_DisplayPadNum = DisplayOpt.DisplayPadNum; m_DisplayModEdge = DisplayOpt.DisplayModEdge; m_DisplayModText = DisplayOpt.DisplayModText; // Give an icon SetIcon( wxICON(a_icon_pcbnew) ); m_InternalUnits = PCB_INTERNAL_UNIT; // Unites internes = 1/10000 inch m_CurrentScreen = ScreenPcb; if ( GetScreen() ) GetScreen()->SetParentFrame(this); GetSettings(); SetSize(m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y); if ( DrawPanel ) DrawPanel->m_Block_Enable = TRUE; ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); }
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString, wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() ) { m_showBorderAndTitleBlock = false; // true to show the frame references m_showAxis = true; // true to show X and Y axis on screen m_showGridAxis = true; // show the grid origin axis m_hotkeysDescrList = g_Module_Editor_Hokeys_Descr; // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) ); SetIcon( icon ); // Show a title (frame title + footprint name): updateTitle(); // Create GAL canvas PCB_BASE_FRAME* parentFrame = static_cast<PCB_BASE_FRAME*>( Kiway().Player( FRAME_PCB, true ) ); PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize, parentFrame->GetGalCanvas()->GetBackend() ); SetGalCanvas( drawPanel ); SetBoard( new BOARD() ); // In modedit, the default net clearance is not known. // (it depends on the actual board) // So we do not show the default clearance, by setting it to 0 // The footprint or pad specific clearance will be shown GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0); // restore the last footprint from the project, if any restoreLastFootprint(); // Ensure all layers and items are visible: // In footprint editor, some layers have no meaning or // cannot be used, but we show all of them, at least to be able // to edit a bad layer GetBoard()->SetVisibleAlls(); wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), font.GetPointSize(), true ); LoadSettings( config() ); SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) ); GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax ); GetScreen()->SetCurItem( NULL ); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); // In modedit, set the default paper size to A4: // this should be OK for all footprint to plot/print SetPageSettings( PAGE_INFO( PAGE_INFO::A4 ) ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg_pane; mesg_pane.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // LAYER_WIDGET is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget lyrs.BestSize( m_Layers->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) ); m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer(1) ); // Add the layer manager ( most right side of pcbframe ) m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 2 ) ); // Layers manager is visible m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( true ); // The left vertical toolbar (fast acces to display options) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left().Layer(1) ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( (wxWindow*) GetGalCanvas(), wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); // Create the manager and dispatcher & route draw panel events to the dispatcher setupTools(); UseGalCanvas( parentFrame->IsGalCanvasActive() ); if( m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).IsShown() ) { m_Layers->ReFill(); m_Layers->ReFillRender(); GetScreen()->m_Active_Layer = F_SilkS; m_Layers->SelectLayer( F_SilkS ); m_Layers->OnLayerSelected(); } m_auimgr.Update(); Raise(); // On some window managers, this is needed Show( true ); Zoom_Automatique( false ); }
GERBVIEW_FRAME::GERBVIEW_FRAME( KIWAY* aKiway, wxWindow* aParent ): EDA_DRAW_FRAME( aKiway, aParent, FRAME_GERBER, wxT( "GerbView" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GERBVIEW_FRAME_NAME ) { m_auxiliaryToolBar = NULL; m_colorsSettings = &g_ColorsSettings; m_gerberLayout = NULL; m_zoomLevelCoeff = ZOOM_FACTOR( 110 ); // Adjusted to roughly displays zoom level = 1 // when the screen shows a 1:1 image // obviously depends on the monitor, // but this is an acceptable value PAGE_INFO pageInfo( wxT( "GERBER" ) ); SetPageSettings( pageInfo ); m_show_layer_manager_tools = true; m_showAxis = true; // true to show X and Y axis on screen m_showBorderAndTitleBlock = false; // true for reference drawings. m_hotkeysDescrList = GerbviewHokeysDescr; m_SelLayerBox = NULL; m_DCodeSelector = NULL; m_displayMode = 0; m_drillFileHistory.SetBaseId( ID_GERBVIEW_DRILL_FILE1 ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_gerbview_xpm ) ); SetIcon( icon ); SetLayout( new GBR_LAYOUT() ); SetVisibleLayers( -1 ); // All draw layers visible. SetScreen( new GBR_SCREEN( GetPageSettings().GetSizeIU() ) ); // Create the PCB_LAYER_WIDGET *after* SetLayout(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_LayersManager = new GERBER_LAYER_WIDGET( this, m_canvas, pointSize ); // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings( config() ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); if( m_LastGridSizeId < 0 ) m_LastGridSizeId = 0; if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000; GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateOptToolbar(); ReCreateAuxiliaryToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // the Layers Manager is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_LayersManager->GetBestSize() ); lyrs.BestSize( m_LayersManager->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); lyrs.TopDockable( false ).BottomDockable( false ); if( m_mainToolBar ) m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows component and netname lists { m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); } if( m_drawToolBar ) m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) ); m_auimgr.AddPane( m_LayersManager, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 0 ) ); if( m_optionsToolBar ) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) ); ReFillLayerWidget(); // this is near end because contents establish size m_LayersManager->ReFillRender(); // Update colors in Render after the config is read m_auimgr.Update(); setActiveLayer( 0, true ); Zoom_Automatique( false ); // Gives a default zoom value UpdateTitleAndInfo(); }
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : PCB_BASE_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString, wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() ) { m_FrameName = GetFootprintEditorFrameName(); m_showBorderAndTitleBlock = false; // true to show the frame references m_showAxis = true; // true to show X and Y axis on screen m_showGridAxis = true; // show the grid origin axis m_HotkeysZoomAndGridList = g_Module_Editor_Hokeys_Descr; // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) ); SetIcon( icon ); // Show a title (frame title + footprint name): updateTitle(); if( !s_Pcb ) { s_Pcb = new BOARD(); // Ensure all layers and items are visible: s_Pcb->SetVisibleAlls(); } SetBoard( s_Pcb ); if( !s_screenModule ) s_screenModule = new PCB_SCREEN( GetPageSettings().GetSizeIU() ); SetScreen( s_screenModule ); GetScreen()->SetCurItem( NULL ); LoadSettings( config() ); GetBoard()->SetVisibleAlls(); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); // In modedit, set the default paper size to A4: // this should be OK for all footprint to plot/print SetPageSettings( PAGE_INFO::A4 ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg_pane; mesg_pane.MessageToolbarPane(); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) ); m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer(1) ); // The left vertical toolbar (fast acces to display options) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left().Layer(1) ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); m_auimgr.Update(); }
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl ) { // This is for python: if( aFileSet.size() != 1 ) { UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ ); DisplayError( this, msg ); return false; } wxString fullFileName( aFileSet[0] ); // We insist on caller sending us an absolute path, if it does not, we say it's a bug. wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(), wxT( "bug in single_top.cpp or project manager." ) ); if( !LockFile( fullFileName ) ) { wxString msg = wxString::Format( _( "PCB file '%s' is already open." ), GetChars( fullFileName ) ); DisplayError( this, msg ); return false; } if( GetScreen()->IsModify() ) { int response = YesNoCancelDialog( this, _( "The current board has been modified. Do you wish to save the changes?" ), wxEmptyString, _( "Save and Load" ), _( "Load Without Saving" ) ); if( response == wxID_CANCEL ) return false; else if( response == wxID_YES ) SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE ); else { // response == wxID_NO, fall thru } } wxFileName pro = fullFileName; pro.SetExt( ProjectFileExtension ); bool is_new = !wxFileName::IsFileReadable( fullFileName ); // If its a non-existent schematic and caller thinks it exists if( is_new && !( aCtl & KICTL_CREATE ) ) { // notify user that fullFileName does not exist, ask if user wants to create it. wxString ask = wxString::Format( _( "Board '%s' does not exist. Do you wish to create it?" ), GetChars( fullFileName ) ); if( !IsOK( this, ask ) ) return false; } Clear_Pcb( false ); // pass false since we prompted above for a modified board IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl ); bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD; if( !converted ) { // PROJECT::SetProjectFullName() is an impactful function. It should only be // called under carefully considered circumstances. // The calling code should know not to ask me here to change projects unless // it knows what consequences that will have on other KIFACEs running and using // this same PROJECT. It can be very harmful if that calling code is stupid. Prj().SetProjectFullName( pro.GetFullPath() ); // load project settings before BOARD LoadProjectSettings(); } if( is_new ) { OnModify(); } else { BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) ); try { PROPERTIES props; char xbuf[30]; char ybuf[30]; // EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet. sprintf( xbuf, "%d", GetPageSizeIU().x ); sprintf( ybuf, "%d", GetPageSizeIU().y ); props["page_width"] = xbuf; props["page_height"] = ybuf; #if USE_INSTRUMENTATION // measure the time to load a BOARD. unsigned startTime = GetRunningMicroSecs(); #endif loadedBoard = pi->Load( fullFileName, NULL, &props ); #if USE_INSTRUMENTATION unsigned stopTime = GetRunningMicroSecs(); printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime ); #endif } catch( const IO_ERROR& ioe ) { wxString msg = wxString::Format( _( "Error loading board.\n%s" ), GetChars( ioe.errorText ) ); DisplayError( this, msg ); return false; } SetBoard( loadedBoard ); // we should not ask PLUGINs to do these items: loadedBoard->BuildListOfNets(); loadedBoard->SynchronizeNetsAndNetClasses(); SetStatusText( wxEmptyString ); BestZoom(); // update the layer names in the listbox ReCreateLayerBox( false ); GetScreen()->ClrModify(); { wxFileName fn = fullFileName; CheckForAutoSaveFile( fullFileName, fn.GetExt() ); } if( pluginType == IO_MGR::LEGACY && loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION ) { DisplayInfoMessage( this, _( "This file was created by an older version of Pcbnew.\n" "It will be stored in the new file format when you save this file again." ) ); } } { wxFileName fn = fullFileName; if( converted ) fn.SetExt( PcbFileExtension ); wxString fname = fn.GetFullPath(); fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP ); GetBoard()->SetFileName( fname ); } UpdateTitle(); if( !converted ) UpdateFileHistory( GetBoard()->GetFileName() ); // Rebuild the new pad list (for drc and ratsnet control ...) GetBoard()->m_Status_Pcb = 0; // Update info shown by the horizontal toolbars SetCurrentNetClass( NETCLASS::Default ); ReFillLayerWidget(); ReCreateLayerBox(); // upate the layer widget to match board visibility states, both layers and render columns. syncLayerVisibilities(); syncLayerWidgetLayer(); syncRenderStates(); // Update the tracks / vias available sizes list: ReCreateAuxiliaryToolbar(); // Update the RATSNEST items, which were not loaded at the time // BOARD::SetVisibleElements() was called from within any PLUGIN. // See case RATSNEST_VISIBLE: in BOARD::SetElementVisibility() GetBoard()->SetVisibleElements( GetBoard()->GetVisibleElements() ); // Display the loaded board: Zoom_Automatique( false ); // Compile ratsnest and displays net info { wxBusyCursor dummy; // Displays an Hourglass while building connectivity Compile_Ratsnest( NULL, true ); GetBoard()->GetRatsnest()->ProcessBoard(); } SetMsgPanel( GetBoard() ); // Refresh the 3D view, if any if( m_Draw3DFrame ) m_Draw3DFrame->NewDisplay(); #if 0 && defined(DEBUG) // Output the board object tree to stdout, but please run from command prompt: GetBoard()->Show( 0, std::cout ); #endif // from EDA_APPL which was first loaded BOARD only: { /* For an obscure reason the focus is lost after loading a board file * when starting up the process. * (seems due to the recreation of the layer manager after loading the file) * Give focus to main window and Drawpanel * must be done for these 2 windows (for an obscure reason ...) * Linux specific * This is more a workaround than a fix. */ SetFocus(); GetCanvas()->SetFocus(); } return true; }
void PCB_EDIT_FRAME::unitsChangeRefresh() { PCB_BASE_FRAME::unitsChangeRefresh(); // Update the grid size select box. ReCreateAuxiliaryToolbar(); }
PCB_EDIT_FRAME::PCB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB, wxT( "Pcbnew" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PCB_EDIT_FRAME_NAME ) { m_showBorderAndTitleBlock = true; // true to display sheet references m_showAxis = false; // true to display X and Y axis m_showOriginAxis = true; m_showGridAxis = true; m_SelTrackWidthBox = NULL; m_SelViaSizeBox = NULL; m_SelLayerBox = NULL; m_show_microwave_tools = false; m_show_layer_manager_tools = true; m_hotkeysDescrList = g_Board_Editor_Hokeys_Descr; m_hasAutoSave = true; m_RecordingMacros = -1; m_microWaveToolBar = NULL; m_rotationAngle = 900; for ( int i = 0; i < 10; i++ ) m_Macros[i].m_Record.clear(); // Create GAL canvas EDA_DRAW_PANEL_GAL* galCanvas = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize, EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE ); SetGalCanvas( galCanvas ); SetBoard( new BOARD() ); // Create the PCB_LAYER_WIDGET *after* SetBoard(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); // printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize ); m_drc = new DRC( this ); // these 2 objects point to each other wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) ); SetIcon( icon ); // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings( config() ); SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) ); GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax ); // PCB drawings start in the upper left corner. GetScreen()->m_Center = false; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); ReCreateMicrowaveVToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // LAYER_WIDGET is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget lyrs.BestSize( m_Layers->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); lyrs.TopDockable( false ).BottomDockable( false ); if( m_mainToolBar ) // The main horizontal toolbar { m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); } if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...) { m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); } if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools) m_auimgr.AddPane( m_microWaveToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ). Right().Layer( 1 ).Position(1).Hide() ); if( m_drawToolBar ) // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) ); // Add the layer manager ( most right side of pcbframe ) m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) ); if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew) { m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) ); m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools ); m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools ); } if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( GetGalCanvas() ) m_auimgr.AddPane( (wxWindow*) GetGalCanvas(), wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); ReFillLayerWidget(); // this is near end because contents establish size m_Layers->ReFillRender(); // Update colors in Render after the config is read syncLayerWidgetLayer(); m_auimgr.Update(); setupTools(); Zoom_Automatique( false ); EDA_DRAW_PANEL_GAL::GAL_TYPE canvasType = LoadCanvasTypeSetting(); if( canvasType != EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE ) { if( GetGalCanvas()->SwitchBackend( canvasType ) ) UseGalCanvas( true ); } enableGALSpecificMenus(); }
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( PCB_EDIT_FRAME* aParent, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : PCB_BASE_FRAME( aParent, MODULE_EDITOR_FRAME, wxEmptyString, pos, size, style ) { m_FrameName = wxT( "ModEditFrame" ); m_showBorderAndTitleBlock = false; // true to show the frame references m_showAxis = true; // true to show X and Y axis on screen m_showGridAxis = true; // show the grid origin axis m_HotkeysZoomAndGridList = g_Module_Editor_Hokeys_Descr; // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) ); SetIcon( icon ); UpdateTitle(); if( !s_Pcb ) { s_Pcb = new BOARD(); // Ensure all layers and items are visible: s_Pcb->SetVisibleAlls(); } SetBoard( s_Pcb ); if( !s_screenModule ) s_screenModule = new PCB_SCREEN( GetPageSettings().GetSizeIU() ); SetScreen( s_screenModule ); GetScreen()->SetCurItem( NULL ); LoadSettings(); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg_pane; mesg_pane.MessageToolbarPane(); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) ); m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() ); m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left() ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); m_auimgr.Update(); }
PCB_EDIT_FRAME::PCB_EDIT_FRAME( wxWindow* parent, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : PCB_BASE_FRAME( parent, PCB_FRAME_TYPE, title, pos, size, style, PCB_EDIT_FRAME_NAME ) { m_FrameName = PCB_EDIT_FRAME_NAME; m_showBorderAndTitleBlock = true; // true to display sheet references m_showAxis = false; // true to display X and Y axis m_showOriginAxis = true; m_showGridAxis = true; m_SelTrackWidthBox = NULL; m_SelViaSizeBox = NULL; m_SelLayerBox = NULL; m_show_microwave_tools = false; m_show_layer_manager_tools = true; m_HotkeysZoomAndGridList = g_Board_Editor_Hokeys_Descr; m_hasAutoSave = true; m_RecordingMacros = -1; m_microWaveToolBar = NULL; m_useCmpFileForFpNames = true; m_footprintLibTable = NULL; m_globalFootprintTable = NULL; m_rotationAngle = 900; #ifdef KICAD_SCRIPTING_WXPYTHON m_pythonPanel = NULL; #endif for ( int i = 0; i < 10; i++ ) m_Macros[i].m_Record.clear(); SetBoard( new BOARD() ); if( GetGalCanvas() ) { ViewReloadBoard( m_Pcb ); // update the tool manager with the new board and its view. if( m_toolManager ) m_toolManager->SetEnvironment( m_Pcb, GetGalCanvas()->GetView(), GetGalCanvas()->GetViewControls(), this ); } // Create the PCB_LAYER_WIDGET *after* SetBoard(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); // printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize ); m_drc = new DRC( this ); // these 2 objects point to each other wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) ); SetIcon( icon ); SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) ); // PCB drawings start in the upper left corner. GetScreen()->m_Center = false; // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings(); // Be sure options are updated m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill; m_DisplayPadFill = DisplayOpt.DisplayPadFill; m_DisplayViaFill = DisplayOpt.DisplayViaFill; m_DisplayPadNum = DisplayOpt.DisplayPadNum; m_DisplayModEdge = DisplayOpt.DisplayModEdge; m_DisplayModText = DisplayOpt.DisplayModText; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); ReCreateMicrowaveVToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // LAYER_WIDGET is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget lyrs.BestSize( m_Layers->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); if( m_mainToolBar ) // The main horizontal toolbar { m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); } if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...) { m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); } if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools) m_auimgr.AddPane( m_microWaveToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ).Right().Layer( 1 ).Position(1).Hide() ); if( m_drawToolBar ) // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) ); // Add the layer manager ( most right side of pcbframe ) m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) ); if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew) { m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) ); m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools ); m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools ); } if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( GetGalCanvas() ) m_auimgr.AddPane( (wxWindow*) GetGalCanvas(), wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); #ifdef KICAD_SCRIPTING_WXPYTHON // Add the scripting panel EDA_PANEINFO pythonAuiInfo; pythonAuiInfo.ScriptingToolbarPane(); pythonAuiInfo.Caption( wxT( "Python Scripting" ) ); pythonAuiInfo.MinSize( wxSize( 200, 100 ) ); pythonAuiInfo.BestSize( wxSize( GetClientSize().x/2, 200 ) ); pythonAuiInfo.Hide(); m_pythonPanel = CreatePythonShellWindow( this ); m_auimgr.AddPane( m_pythonPanel, pythonAuiInfo.Name( wxT( "PythonPanel" ) ).Bottom().Layer(9) ); m_pythonPanelHidden = true; #endif ReFillLayerWidget(); // this is near end because contents establish size m_Layers->ReFillRender(); // Update colors in Render after the config is read syncLayerWidgetLayer(); m_auimgr.Update(); if( m_globalFootprintTable == NULL ) { try { m_globalFootprintTable = new FP_LIB_TABLE(); if( !FP_LIB_TABLE::LoadGlobalTable( *m_globalFootprintTable ) ) { DisplayInfoMessage( this, wxT( "You have run Pcbnew for the first time using the " "new footprint library table method for finding " "footprints. Pcbnew has either copied the default " "table or created an empty table in your home " "folder. You must first configure the library " "table to include all footprint libraries not " "included with KiCad. See the \"Footprint Library " "Table\" section of the CvPcb documentation for " "more information." ) ); } } catch( IO_ERROR ioe ) { wxString msg; msg.Printf( _( "An error occurred attempting to load the global footprint library " "table:\n\n%s" ), GetChars( ioe.errorText ) ); DisplayError( this, msg ); } } setupTools(); }