/*
* Handle rmgr STANDBY_ID records for DecodeRecordIntoReorderBuffer().
*/
static void
DecodeStandbyOp(LogicalDecodingContext *ctx, XLogRecordBuffer *buf)
{
SnapBuild *builder = ctx->snapshot_builder;
XLogRecord *r = &buf->record;
uint8 info = r->xl_info & ~XLR_INFO_MASK;
ReorderBufferProcessXid(ctx->reorder, r->xl_xid, buf->origptr);
switch (info)
{
case XLOG_RUNNING_XACTS:
{
xl_running_xacts *running = (xl_running_xacts *) buf->record_data;
SnapBuildProcessRunningXacts(builder, buf->origptr, running);
/*
* Abort all transactions that we keep track of, that are
* older than the record's oldestRunningXid. This is the most
* convenient spot for doing so since, in contrast to shutdown
* or end-of-recovery checkpoints, we have information about
* all running transactions which includes prepared ones,
* while shutdown checkpoints just know that no non-prepared
* transactions are in progress.
*/
ReorderBufferAbortOld(ctx->reorder, running->oldestRunningXid);
}
break;
case XLOG_STANDBY_LOCK:
break;
default:
elog(ERROR, "unexpected RM_STANDBY_ID record type: %u", info);
}
}
/*
* Handle rmgr HEAP2_ID records for DecodeRecordIntoReorderBuffer().
*/
static void
DecodeHeap2Op(LogicalDecodingContext *ctx, XLogRecordBuffer *buf)
{
uint8 info = buf->record.xl_info & XLOG_HEAP_OPMASK;
TransactionId xid = buf->record.xl_xid;
SnapBuild *builder = ctx->snapshot_builder;
ReorderBufferProcessXid(ctx->reorder, xid, buf->origptr);
/* no point in doing anything yet */
if (SnapBuildCurrentState(builder) < SNAPBUILD_FULL_SNAPSHOT)
return;
switch (info)
{
case XLOG_HEAP2_MULTI_INSERT:
if (SnapBuildProcessChange(builder, xid, buf->origptr))
DecodeMultiInsert(ctx, buf);
break;
case XLOG_HEAP2_NEW_CID:
{
xl_heap_new_cid *xlrec;
xlrec = (xl_heap_new_cid *) buf->record_data;
SnapBuildProcessNewCid(builder, xid, buf->origptr, xlrec);
break;
}
case XLOG_HEAP2_REWRITE:
/*
* Although these records only exist to serve the needs of logical
* decoding, all the work happens as part of crash or archive
* recovery, so we don't need to do anything here.
*/
break;
/*
* Everything else here is just low level physical stuff we're not
* interested in.
*/
case XLOG_HEAP2_FREEZE_PAGE:
case XLOG_HEAP2_CLEAN:
case XLOG_HEAP2_CLEANUP_INFO:
case XLOG_HEAP2_VISIBLE:
case XLOG_HEAP2_LOCK_UPDATED:
break;
default:
elog(ERROR, "unexpected RM_HEAP2_ID record type: %u", info);
}
}
/*
* Handle rmgr LOGICALMSG_ID records for DecodeRecordIntoReorderBuffer().
*/
static void
DecodeLogicalMsgOp(LogicalDecodingContext *ctx, XLogRecordBuffer *buf)
{
SnapBuild *builder = ctx->snapshot_builder;
XLogReaderState *r = buf->record;
TransactionId xid = XLogRecGetXid(r);
uint8 info = XLogRecGetInfo(r) & ~XLR_INFO_MASK;
RepOriginId origin_id = XLogRecGetOrigin(r);
Snapshot snapshot;
xl_logical_message *message;
if (info != XLOG_LOGICAL_MESSAGE)
elog(ERROR, "unexpected RM_LOGICALMSG_ID record type: %u", info);
ReorderBufferProcessXid(ctx->reorder, XLogRecGetXid(r), buf->origptr);
/* No point in doing anything yet. */
if (SnapBuildCurrentState(builder) < SNAPBUILD_FULL_SNAPSHOT)
return;
message = (xl_logical_message *) XLogRecGetData(r);
if (message->dbId != ctx->slot->data.database ||
FilterByOrigin(ctx, origin_id))
return;
if (message->transactional &&
!SnapBuildProcessChange(builder, xid, buf->origptr))
return;
else if (!message->transactional &&
(SnapBuildCurrentState(builder) != SNAPBUILD_CONSISTENT ||
SnapBuildXactNeedsSkip(builder, buf->origptr)))
return;
snapshot = SnapBuildGetOrBuildSnapshot(builder, xid);
ReorderBufferQueueMessage(ctx->reorder, xid, snapshot, buf->endptr,
message->transactional,
message->message, /* first part of message is
* prefix */
message->message_size,
message->message + message->prefix_size);
}
/*
* Handle rmgr XLOG_ID records for DecodeRecordIntoReorderBuffer().
*/
static void
DecodeXLogOp(LogicalDecodingContext *ctx, XLogRecordBuffer *buf)
{
SnapBuild *builder = ctx->snapshot_builder;
uint8 info = XLogRecGetInfo(buf->record) & ~XLR_INFO_MASK;
ReorderBufferProcessXid(ctx->reorder, XLogRecGetXid(buf->record),
buf->origptr);
switch (info)
{
/* this is also used in END_OF_RECOVERY checkpoints */
case XLOG_CHECKPOINT_SHUTDOWN:
case XLOG_END_OF_RECOVERY:
SnapBuildSerializationPoint(builder, buf->origptr);
break;
case XLOG_CHECKPOINT_ONLINE:
/*
* a RUNNING_XACTS record will have been logged near to this, we
* can restart from there.
*/
break;
case XLOG_NOOP:
case XLOG_NEXTOID:
case XLOG_SWITCH:
case XLOG_BACKUP_END:
case XLOG_PARAMETER_CHANGE:
case XLOG_RESTORE_POINT:
case XLOG_FPW_CHANGE:
case XLOG_FPI_FOR_HINT:
case XLOG_FPI:
break;
default:
elog(ERROR, "unexpected RM_XLOG_ID record type: %u", info);
}
}
/*
* Take every XLogReadRecord()ed record and perform the actions required to
* decode it using the output plugin already setup in the logical decoding
* context.
*
* NB: Note that every record's xid needs to be processed by reorderbuffer
* (xids contained in the content of records are not relevant for this rule).
* That means that for records which'd otherwise not go through the
* reorderbuffer ReorderBufferProcessXid() has to be called. We don't want to
* call ReorderBufferProcessXid for each record type by default, because
* e.g. empty xacts can be handled more efficiently if there's no previous
* state for them.
*/
void
LogicalDecodingProcessRecord(LogicalDecodingContext *ctx, XLogRecord *record)
{
XLogRecordBuffer buf;
buf.origptr = ctx->reader->ReadRecPtr;
buf.endptr = ctx->reader->EndRecPtr;
buf.record = *record;
buf.record_data = XLogRecGetData(record);
/* cast so we get a warning when new rmgrs are added */
switch ((RmgrIds) buf.record.xl_rmid)
{
/*
* Rmgrs we care about for logical decoding. Add new rmgrs in
* rmgrlist.h's order.
*/
case RM_XLOG_ID:
DecodeXLogOp(ctx, &buf);
break;
case RM_XACT_ID:
DecodeXactOp(ctx, &buf);
break;
case RM_STANDBY_ID:
DecodeStandbyOp(ctx, &buf);
break;
case RM_HEAP2_ID:
DecodeHeap2Op(ctx, &buf);
break;
case RM_HEAP_ID:
DecodeHeapOp(ctx, &buf);
break;
/*
* Rmgrs irrelevant for logical decoding; they describe stuff not
* represented in logical decoding. Add new rmgrs in rmgrlist.h's
* order.
*/
case RM_SMGR_ID:
case RM_CLOG_ID:
case RM_DBASE_ID:
case RM_TBLSPC_ID:
case RM_MULTIXACT_ID:
case RM_RELMAP_ID:
case RM_BTREE_ID:
case RM_HASH_ID:
case RM_GIN_ID:
case RM_GIST_ID:
case RM_SEQ_ID:
case RM_SPGIST_ID:
case RM_BITMAP_ID:
case RM_DISTRIBUTEDLOG_ID:
/* just deal with xid, and done */
ReorderBufferProcessXid(ctx->reorder, record->xl_xid,
buf.origptr);
break;
case RM_APPEND_ONLY_ID:
/*
* GPDB_94_MERGE_FIXME: logical decoding hasn't been implemented for
* append-only tables yet.
*/
break;
case RM_NEXT_ID:
elog(ERROR, "unexpected RM_NEXT_ID rmgr_id: %u", (RmgrIds) buf.record.xl_rmid);
}
}
/*
* Handle rmgr HEAP_ID records for DecodeRecordIntoReorderBuffer().
*/
static void
DecodeHeapOp(LogicalDecodingContext *ctx, XLogRecordBuffer *buf)
{
uint8 info = buf->record.xl_info & XLOG_HEAP_OPMASK;
TransactionId xid = buf->record.xl_xid;
SnapBuild *builder = ctx->snapshot_builder;
ReorderBufferProcessXid(ctx->reorder, xid, buf->origptr);
/* no point in doing anything yet */
if (SnapBuildCurrentState(builder) < SNAPBUILD_FULL_SNAPSHOT)
return;
switch (info)
{
case XLOG_HEAP_INSERT:
if (SnapBuildProcessChange(builder, xid, buf->origptr))
DecodeInsert(ctx, buf);
break;
/*
* Treat HOT update as normal updates. There is no useful
* information in the fact that we could make it a HOT update
* locally and the WAL layout is compatible.
*/
case XLOG_HEAP_HOT_UPDATE:
case XLOG_HEAP_UPDATE:
if (SnapBuildProcessChange(builder, xid, buf->origptr))
DecodeUpdate(ctx, buf);
break;
case XLOG_HEAP_DELETE:
if (SnapBuildProcessChange(builder, xid, buf->origptr))
DecodeDelete(ctx, buf);
break;
case XLOG_HEAP_NEWPAGE:
/*
* This is only used in places like indexams and CLUSTER which
* don't contain changes relevant for logical replication.
*/
break;
case XLOG_HEAP_INPLACE:
/*
* Inplace updates are only ever performed on catalog tuples and
* can, per definition, not change tuple visibility. Since we
* don't decode catalog tuples, we're not interested in the
* record's contents.
*
* In-place updates can be used either by XID-bearing transactions
* (e.g. in CREATE INDEX CONCURRENTLY) or by XID-less
* transactions (e.g. VACUUM). In the former case, the commit
* record will include cache invalidations, so we mark the
* transaction as catalog modifying here. Currently that's
* redundant because the commit will do that as well, but once we
* support decoding in-progress relations, this will be important.
*/
if (!TransactionIdIsValid(xid))
break;
SnapBuildProcessChange(builder, xid, buf->origptr);
ReorderBufferXidSetCatalogChanges(ctx->reorder, xid, buf->origptr);
break;
case XLOG_HEAP_LOCK:
/* we don't care about row level locks for now */
break;
default:
elog(ERROR, "unexpected RM_HEAP_ID record type: %u", info);
break;
}
}
/*
* Handle rmgr XACT_ID records for DecodeRecordIntoReorderBuffer().
*/
static void
DecodeXactOp(LogicalDecodingContext *ctx, XLogRecordBuffer *buf)
{
SnapBuild *builder = ctx->snapshot_builder;
ReorderBuffer *reorder = ctx->reorder;
XLogRecord *r = &buf->record;
uint8 info = r->xl_info & ~XLR_INFO_MASK;
/*
* No point in doing anything yet, data could not be decoded anyway. It's
* ok not to call ReorderBufferProcessXid() in that case, except in the
* assignment case there'll not be any later records with the same xid;
* and in the assignment case we'll not decode those xacts.
*/
if (SnapBuildCurrentState(builder) < SNAPBUILD_FULL_SNAPSHOT)
return;
switch (info)
{
case XLOG_XACT_COMMIT:
{
xl_xact_commit *xlrec;
TransactionId *subxacts = NULL;
SharedInvalidationMessage *invals = NULL;
xlrec = (xl_xact_commit *) buf->record_data;
subxacts = (TransactionId *) &(xlrec->xnodes[xlrec->nrels]);
invals = (SharedInvalidationMessage *) &(subxacts[xlrec->nsubxacts]);
DecodeCommit(ctx, buf, r->xl_xid, xlrec->dbId,
xlrec->xact_time,
xlrec->nsubxacts, subxacts,
xlrec->nmsgs, invals);
break;
}
case XLOG_XACT_COMMIT_PREPARED:
{
xl_xact_commit_prepared *prec;
xl_xact_commit *xlrec;
TransactionId *subxacts;
SharedInvalidationMessage *invals = NULL;
/* Prepared commits contain a normal commit record... */
prec = (xl_xact_commit_prepared *) buf->record_data;
xlrec = &prec->crec;
subxacts = (TransactionId *) &(xlrec->xnodes[xlrec->nrels]);
invals = (SharedInvalidationMessage *) &(subxacts[xlrec->nsubxacts]);
DecodeCommit(ctx, buf, prec->xid, xlrec->dbId,
xlrec->xact_time,
xlrec->nsubxacts, subxacts,
xlrec->nmsgs, invals);
break;
}
case XLOG_XACT_COMMIT_COMPACT:
{
xl_xact_commit_compact *xlrec;
xlrec = (xl_xact_commit_compact *) buf->record_data;
DecodeCommit(ctx, buf, r->xl_xid, InvalidOid,
xlrec->xact_time,
xlrec->nsubxacts, xlrec->subxacts,
0, NULL);
break;
}
case XLOG_XACT_ABORT:
{
xl_xact_abort *xlrec;
TransactionId *sub_xids;
xlrec = (xl_xact_abort *) buf->record_data;
sub_xids = (TransactionId *) &(xlrec->xnodes[xlrec->nrels]);
DecodeAbort(ctx, buf->origptr, r->xl_xid,
sub_xids, xlrec->nsubxacts);
break;
}
case XLOG_XACT_ABORT_PREPARED:
{
xl_xact_abort_prepared *prec;
xl_xact_abort *xlrec;
TransactionId *sub_xids;
/* prepared abort contain a normal commit abort... */
prec = (xl_xact_abort_prepared *) buf->record_data;
xlrec = &prec->arec;
sub_xids = (TransactionId *) &(xlrec->xnodes[xlrec->nrels]);
/* r->xl_xid is committed in a separate record */
DecodeAbort(ctx, buf->origptr, prec->xid,
sub_xids, xlrec->nsubxacts);
break;
}
case XLOG_XACT_ASSIGNMENT:
{
xl_xact_assignment *xlrec;
int i;
TransactionId *sub_xid;
xlrec = (xl_xact_assignment *) buf->record_data;
sub_xid = &xlrec->xsub[0];
for (i = 0; i < xlrec->nsubxacts; i++)
{
ReorderBufferAssignChild(reorder, xlrec->xtop,
*(sub_xid++), buf->origptr);
}
break;
}
case XLOG_XACT_PREPARE:
/*
* Currently decoding ignores PREPARE TRANSACTION and will just
* decode the transaction when the COMMIT PREPARED is sent or
* throw away the transaction's contents when a ROLLBACK PREPARED
* is received. In the future we could add code to expose prepared
* transactions in the changestream allowing for a kind of
* distributed 2PC.
*/
ReorderBufferProcessXid(reorder, r->xl_xid, buf->origptr);
break;
default:
elog(ERROR, "unexpected RM_XACT_ID record type: %u", info);
}
}
/*
* Take every XLogReadRecord()ed record and perform the actions required to
* decode it using the output plugin already setup in the logical decoding
* context.
*
* NB: Note that every record's xid needs to be processed by reorderbuffer
* (xids contained in the content of records are not relevant for this rule).
* That means that for records which'd otherwise not go through the
* reorderbuffer ReorderBufferProcessXid() has to be called. We don't want to
* call ReorderBufferProcessXid for each record type by default, because
* e.g. empty xacts can be handled more efficiently if there's no previous
* state for them.
*/
void
LogicalDecodingProcessRecord(LogicalDecodingContext *ctx, XLogReaderState *record)
{
XLogRecordBuffer buf;
buf.origptr = ctx->reader->ReadRecPtr;
buf.endptr = ctx->reader->EndRecPtr;
buf.record = record;
/* cast so we get a warning when new rmgrs are added */
switch ((RmgrIds) XLogRecGetRmid(record))
{
/*
* Rmgrs we care about for logical decoding. Add new rmgrs in
* rmgrlist.h's order.
*/
case RM_XLOG_ID:
DecodeXLogOp(ctx, &buf);
break;
case RM_XACT_ID:
DecodeXactOp(ctx, &buf);
break;
case RM_STANDBY_ID:
DecodeStandbyOp(ctx, &buf);
break;
case RM_HEAP2_ID:
DecodeHeap2Op(ctx, &buf);
break;
case RM_HEAP_ID:
DecodeHeapOp(ctx, &buf);
break;
case RM_LOGICALMSG_ID:
DecodeLogicalMsgOp(ctx, &buf);
break;
/*
* Rmgrs irrelevant for logical decoding; they describe stuff not
* represented in logical decoding. Add new rmgrs in rmgrlist.h's
* order.
*/
case RM_SMGR_ID:
case RM_CLOG_ID:
case RM_DBASE_ID:
case RM_TBLSPC_ID:
case RM_MULTIXACT_ID:
case RM_RELMAP_ID:
case RM_BTREE_ID:
case RM_HASH_ID:
case RM_GIN_ID:
case RM_GIST_ID:
case RM_SEQ_ID:
case RM_SPGIST_ID:
case RM_BRIN_ID:
case RM_COMMIT_TS_ID:
case RM_REPLORIGIN_ID:
case RM_GENERIC_ID:
/* just deal with xid, and done */
ReorderBufferProcessXid(ctx->reorder, XLogRecGetXid(record),
buf.origptr);
break;
case RM_NEXT_ID:
elog(ERROR, "unexpected RM_NEXT_ID rmgr_id: %u", (RmgrIds) XLogRecGetRmid(buf.record));
}
}
/*
* Handle rmgr XACT_ID records for DecodeRecordIntoReorderBuffer().
*/
static void
DecodeXactOp(LogicalDecodingContext *ctx, XLogRecordBuffer *buf)
{
SnapBuild *builder = ctx->snapshot_builder;
ReorderBuffer *reorder = ctx->reorder;
XLogReaderState *r = buf->record;
uint8 info = XLogRecGetInfo(r) & XLOG_XACT_OPMASK;
/*
* No point in doing anything yet, data could not be decoded anyway. It's
* ok not to call ReorderBufferProcessXid() in that case, except in the
* assignment case there'll not be any later records with the same xid;
* and in the assignment case we'll not decode those xacts.
*/
if (SnapBuildCurrentState(builder) < SNAPBUILD_FULL_SNAPSHOT)
return;
switch (info)
{
case XLOG_XACT_COMMIT:
case XLOG_XACT_COMMIT_PREPARED:
{
xl_xact_commit *xlrec;
xl_xact_parsed_commit parsed;
TransactionId xid;
xlrec = (xl_xact_commit *) XLogRecGetData(r);
ParseCommitRecord(XLogRecGetInfo(buf->record), xlrec, &parsed);
if (!TransactionIdIsValid(parsed.twophase_xid))
xid = XLogRecGetXid(r);
else
xid = parsed.twophase_xid;
DecodeCommit(ctx, buf, &parsed, xid);
break;
}
case XLOG_XACT_ABORT:
case XLOG_XACT_ABORT_PREPARED:
{
xl_xact_abort *xlrec;
xl_xact_parsed_abort parsed;
TransactionId xid;
xlrec = (xl_xact_abort *) XLogRecGetData(r);
ParseAbortRecord(XLogRecGetInfo(buf->record), xlrec, &parsed);
if (!TransactionIdIsValid(parsed.twophase_xid))
xid = XLogRecGetXid(r);
else
xid = parsed.twophase_xid;
DecodeAbort(ctx, buf, &parsed, xid);
break;
}
case XLOG_XACT_ASSIGNMENT:
{
xl_xact_assignment *xlrec;
int i;
TransactionId *sub_xid;
xlrec = (xl_xact_assignment *) XLogRecGetData(r);
sub_xid = &xlrec->xsub[0];
for (i = 0; i < xlrec->nsubxacts; i++)
{
ReorderBufferAssignChild(reorder, xlrec->xtop,
*(sub_xid++), buf->origptr);
}
break;
}
case XLOG_XACT_PREPARE:
/*
* Currently decoding ignores PREPARE TRANSACTION and will just
* decode the transaction when the COMMIT PREPARED is sent or
* throw away the transaction's contents when a ROLLBACK PREPARED
* is received. In the future we could add code to expose prepared
* transactions in the changestream allowing for a kind of
* distributed 2PC.
*/
ReorderBufferProcessXid(reorder, XLogRecGetXid(r), buf->origptr);
break;
default:
elog(ERROR, "unexpected RM_XACT_ID record type: %u", info);
}
}
