Esempio n. 1
0
/* phase in the luts based on the current and max step */
static void nvsd_phase_in_luts(struct tegra_dc_sd_settings *settings,
	struct tegra_dc *dc)
{
	u32 val;
	u8 bw_idx;
	int i;
	u16 phase_settings_step = settings->phase_settings_step;
	u16 num_phase_in_steps = settings->num_phase_in_steps;

	bw_idx = nvsd_get_bw_idx(settings);

	/* Phase in Final LUT */
	for (i = 0; i < DC_DISP_SD_LUT_NUM; i++) {
		val = SD_LUT_R((settings->lut[bw_idx][i].r *
				phase_settings_step)/num_phase_in_steps) |
			SD_LUT_G((settings->lut[bw_idx][i].g *
				phase_settings_step)/num_phase_in_steps) |
			SD_LUT_B((settings->lut[bw_idx][i].b *
				phase_settings_step)/num_phase_in_steps);

		tegra_dc_writel(dc, val, DC_DISP_SD_LUT(i));
	}
	/* Phase in Final BLTF */
	for (i = 0; i < DC_DISP_SD_BL_TF_NUM; i++) {
		val = SD_BL_TF_POINT_0(255-((255-settings->bltf[bw_idx][i][0])
				* phase_settings_step)/num_phase_in_steps) |
			SD_BL_TF_POINT_1(255-((255-settings->bltf[bw_idx][i][1])
				* phase_settings_step)/num_phase_in_steps) |
			SD_BL_TF_POINT_2(255-((255-settings->bltf[bw_idx][i][2])
				* phase_settings_step)/num_phase_in_steps) |
			SD_BL_TF_POINT_3(255-((255-settings->bltf[bw_idx][i][3])
				* phase_settings_step)/num_phase_in_steps);

		tegra_dc_writel(dc, val, DC_DISP_SD_BL_TF(i));
	}
}
Esempio n. 2
0
/* Functional initialization */
void nvsd_init(struct tegra_dc *dc, struct tegra_dc_sd_settings *settings)
{
	u32 i = 0;
	u32 val = 0;
	u32 bw_idx = 0;
	/* TODO: check if HW says SD's available */

	/* If SD's not present or disabled, clear the register and return. */
	if (!settings || settings->enable == 0) {
		/* clear the brightness val, too. */
		if (sd_brightness)
			atomic_set(sd_brightness, 255);

		sd_brightness = NULL;

		if (settings)
			settings->phase_settings_step = 0;
		tegra_dc_writel(dc, 0, DC_DISP_SD_CONTROL);
		return;
	}

	dev_dbg(&dc->ndev->dev, "NVSD Init:\n");

	/* init agg_priorities */
	if (!settings->agg_priorities.agg[0])
		settings->agg_priorities.agg[0] = settings->aggressiveness;

	/* WAR: Settings will not be valid until the next flip.
	 * Thus, set manual K to either HW's current value (if
	 * we're already enabled) or a non-effective value (if
	 * we're about to enable). */
	val = tegra_dc_readl(dc, DC_DISP_SD_CONTROL);

	if (val & SD_ENABLE_NORMAL)
		if (settings->phase_in_adjustments)
			i = tegra_dc_readl(dc, DC_DISP_SD_MAN_K_VALUES);
		else
			i = tegra_dc_readl(dc, DC_DISP_SD_HW_K_VALUES);
	else
		i = 0; /* 0 values for RGB = 1.0, i.e. non-affected */

	tegra_dc_writel(dc, i, DC_DISP_SD_MAN_K_VALUES);
	/* Enable manual correction mode here so that changing the
	 * settings won't immediately impact display dehavior. */
	val |= SD_CORRECTION_MODE_MAN;
	tegra_dc_writel(dc, val, DC_DISP_SD_CONTROL);

	bw_idx = nvsd_get_bw_idx(settings);

	/* Values of SD LUT & BL TF are different according to bin_width on T30
	 * due to HW bug. Therefore we use bin_width to select the correct table
	 * on T30. */

#ifdef CONFIG_TEGRA_SD_GEN2
	bw_idx = 0;
#endif

	/* Write LUT */
	if (!settings->cmd) {
		dev_dbg(&dc->ndev->dev, "  LUT:\n");

		for (i = 0; i < DC_DISP_SD_LUT_NUM; i++) {
			val = SD_LUT_R(settings->lut[bw_idx][i].r) |
				SD_LUT_G(settings->lut[bw_idx][i].g) |
				SD_LUT_B(settings->lut[bw_idx][i].b);
			tegra_dc_writel(dc, val, DC_DISP_SD_LUT(i));

			dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
		}
	}

	/* Write BL TF */
	if (!settings->cmd) {
		dev_dbg(&dc->ndev->dev, "  BL_TF:\n");

		for (i = 0; i < DC_DISP_SD_BL_TF_NUM; i++) {
			val = SD_BL_TF_POINT_0(settings->bltf[bw_idx][i][0]) |
				SD_BL_TF_POINT_1(settings->bltf[bw_idx][i][1]) |
				SD_BL_TF_POINT_2(settings->bltf[bw_idx][i][2]) |
				SD_BL_TF_POINT_3(settings->bltf[bw_idx][i][3]);

			tegra_dc_writel(dc, val, DC_DISP_SD_BL_TF(i));

			dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
		}
	} else if ((settings->cmd & PHASE_IN)) {
		settings->cmd &= ~PHASE_IN;
		/* Write NO_OP values for BLTF */
		for (i = 0; i < DC_DISP_SD_BL_TF_NUM; i++) {
			val = SD_BL_TF_POINT_0(0xFF) |
				SD_BL_TF_POINT_1(0xFF) |
				SD_BL_TF_POINT_2(0xFF) |
				SD_BL_TF_POINT_3(0xFF);

			tegra_dc_writel(dc, val, DC_DISP_SD_BL_TF(i));

			dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
		}
	}

	/* Set step correctly on init */
	if (!settings->cmd && settings->phase_in_settings) {
		settings->num_phase_in_steps = STEPS_PER_AGG_LVL *
			settings->aggressiveness;
		settings->phase_settings_step = settings->enable ?
			settings->num_phase_in_steps : 0;
	}

	/* Write Coeff */
	val = SD_CSC_COEFF_R(settings->coeff.r) |
		SD_CSC_COEFF_G(settings->coeff.g) |
		SD_CSC_COEFF_B(settings->coeff.b);
	tegra_dc_writel(dc, val, DC_DISP_SD_CSC_COEFF);
	dev_dbg(&dc->ndev->dev, "  COEFF: 0x%08x\n", val);

	/* Write BL Params */
	val = SD_BLP_TIME_CONSTANT(settings->blp.time_constant) |
		SD_BLP_STEP(settings->blp.step);
	tegra_dc_writel(dc, val, DC_DISP_SD_BL_PARAMETERS);
	dev_dbg(&dc->ndev->dev, "  BLP: 0x%08x\n", val);

	/* Write Auto/Manual PWM */
	val = (settings->use_auto_pwm) ? SD_BLC_MODE_AUTO : SD_BLC_MODE_MAN;
	tegra_dc_writel(dc, val, DC_DISP_SD_BL_CONTROL);
	dev_dbg(&dc->ndev->dev, "  BL_CONTROL: 0x%08x\n", val);

	/* Write Flicker Control */
	val = SD_FC_TIME_LIMIT(settings->fc.time_limit) |
		SD_FC_THRESHOLD(settings->fc.threshold);
	tegra_dc_writel(dc, val, DC_DISP_SD_FLICKER_CONTROL);
	dev_dbg(&dc->ndev->dev, "  FLICKER_CONTROL: 0x%08x\n", val);

#ifdef CONFIG_TEGRA_SD_GEN2
	/* Write K limit */
	if (settings->k_limit_enable) {
		val = settings->k_limit;
		if (val < 128)
			val = 128;
		else if (val > 255)
			val = 255;
		val = SD_K_LIMIT(val);
		tegra_dc_writel(dc, val, DC_DISP_SD_K_LIMIT);
		dev_dbg(&dc->ndev->dev, "  K_LIMIT: 0x%08x\n", val);
	}

	if (settings->sd_window_enable) {
		/* Write sd window */
		val = SD_WIN_H_POSITION(settings->sd_window.h_position) |
			SD_WIN_V_POSITION(settings->sd_window.v_position);
		tegra_dc_writel(dc, val, DC_DISP_SD_WINDOW_POSITION);
		dev_dbg(&dc->ndev->dev, "  SD_WINDOW_POSITION: 0x%08x\n", val);

		val = SD_WIN_H_POSITION(settings->sd_window.h_size) |
			SD_WIN_V_POSITION(settings->sd_window.v_size);
		tegra_dc_writel(dc, val, DC_DISP_SD_WINDOW_SIZE);
		dev_dbg(&dc->ndev->dev, "  SD_WINDOW_SIZE: 0x%08x\n", val);
	}

	if (settings->soft_clipping_enable) {
		/* Write soft clipping */
		val = (64 * 1024) / (256 - settings->soft_clipping_threshold);
		val = SD_SOFT_CLIPPING_RECIP(val) |
		SD_SOFT_CLIPPING_THRESHOLD(settings->soft_clipping_threshold);
		tegra_dc_writel(dc, val, DC_DISP_SD_SOFT_CLIPPING);
		dev_dbg(&dc->ndev->dev, "  SOFT_CLIPPING: 0x%08x\n", val);
	}

	if (settings->smooth_k_enable) {
		/* Write K incr value */
		val = SD_SMOOTH_K_INCR(settings->smooth_k_incr);
		tegra_dc_writel(dc, val, DC_DISP_SD_SMOOTH_K);
		dev_dbg(&dc->ndev->dev, "  SMOOTH_K: 0x%08x\n", val);
	}
#endif

	/* Manage SD Control */
	val = 0;
	/* Stay in manual correction mode until the next flip. */
	val |= SD_CORRECTION_MODE_MAN;
	/* Enable / One-Shot */
	val |= (settings->enable == 2) ?
		(SD_ENABLE_ONESHOT | SD_ONESHOT_ENABLE) :
		SD_ENABLE_NORMAL;
	/* HW Update Delay */
	val |= SD_HW_UPDATE_DLY(settings->hw_update_delay);
	/* Video Luma */
	val |= (settings->use_vid_luma) ? SD_USE_VID_LUMA : 0;
	/* Aggressiveness */
	val |= SD_AGGRESSIVENESS(settings->aggressiveness);
	/* Bin Width (value derived from bw_idx) */
	val |= bw_idx << 3;
#ifdef CONFIG_TEGRA_SD_GEN2
	/* K limit enable */
	val |= (settings->k_limit_enable) ? SD_K_LIMIT_ENABLE : 0;
	/* Programmable sd window enable */
	val |= (settings->sd_window_enable) ? SD_WINDOW_ENABLE : 0;
	/* Soft clipping enable */
	val |= (settings->soft_clipping_enable) ? SD_SOFT_CLIPPING_ENABLE : 0;
	/* Smooth K enable */
	val |= (settings->smooth_k_enable) ? SD_SMOOTH_K_ENABLE : 0;
	/* SD proc control */
	val |= (settings->use_vpulse2) ? SD_VPULSE2 : SD_VSYNC;
#endif
	/* Finally, Write SD Control */
	tegra_dc_writel(dc, val, DC_DISP_SD_CONTROL);
	dev_dbg(&dc->ndev->dev, "  SD_CONTROL: 0x%08x\n", val);

	/* set the brightness pointer */
	sd_brightness = settings->sd_brightness;

	/* note that we're in manual K until the next flip */
	atomic_set(&man_k_until_blank, 1);
}
Esempio n. 3
0
/* Functional initialization */
void nvsd_init(struct tegra_dc *dc, struct tegra_dc_sd_settings *settings)
{
	u32 i = 0;
	u32 val = 0;
	u32 bw_idx = 0;
	u32 bw = 0;
	/* TODO: check if HW says SD's available */

	/* If SD's not present or disabled, clear the register and return. */
	if (!settings || settings->enable == 0) {
		/* clear the brightness val, too. */
		if (sd_brightness)
			atomic_set(sd_brightness, 255);

		sd_brightness = NULL;

		tegra_dc_writel(dc, 0, DC_DISP_SD_CONTROL);
		return;
	}

	dev_dbg(&dc->ndev->dev, "NVSD Init:\n");

	/* WAR: Settings will not be valid until the next flip.
	 * Thus, set manual K to either HW's current value (if
	 * we're already enabled) or a non-effective value (if
	 * we're about to enable). */
	val = tegra_dc_readl(dc, DC_DISP_SD_CONTROL);

	if (val & SD_ENABLE_NORMAL)
		i = tegra_dc_readl(dc, DC_DISP_SD_HW_K_VALUES);
	else
		i = 0; /* 0 values for RGB = 1.0, i.e. non-affected */

	tegra_dc_writel(dc, i, DC_DISP_SD_MAN_K_VALUES);
	/* Enable manual correction mode here so that changing the
	 * settings won't immediately impact display dehavior. */
	val |= SD_CORRECTION_MODE_MAN;
	tegra_dc_writel(dc, val, DC_DISP_SD_CONTROL);

	switch (settings->bin_width) {
	default:
	case -1:
		/* A -1 bin-width indicates 'automatic'
		 * based upon aggressiveness. */
		settings->bin_width = -1;

		switch (settings->aggressiveness) {
		default:
		case 0:
		case 1:
			bw = SD_BIN_WIDTH_ONE;
			break;
		case 2:
		case 3:
		case 4:
			bw = SD_BIN_WIDTH_TWO;
			break;
		case 5:
			bw = SD_BIN_WIDTH_FOUR;
			break;
		}

		break;
	case 1:
		bw = SD_BIN_WIDTH_ONE;
		break;
	case 2:
		bw = SD_BIN_WIDTH_TWO;
		break;
	case 4:
		bw = SD_BIN_WIDTH_FOUR;
		break;
	case 8:
		bw = SD_BIN_WIDTH_EIGHT;
		break;
	}

	bw_idx = bw >> 3;

	/* Write LUT */
	dev_dbg(&dc->ndev->dev, "  LUT:\n");

	for (i = 0; i < DC_DISP_SD_LUT_NUM; i++) {
		val = SD_LUT_R(settings->lut[bw_idx][i].r) |
			SD_LUT_G(settings->lut[bw_idx][i].g) |
			SD_LUT_B(settings->lut[bw_idx][i].b);
		tegra_dc_writel(dc, val, DC_DISP_SD_LUT(i));

		dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
	}

	/* Write BL TF */
	dev_dbg(&dc->ndev->dev, "  BL_TF:\n");

	for (i = 0; i < DC_DISP_SD_BL_TF_NUM; i++) {
		val = SD_BL_TF_POINT_0(settings->bltf[bw_idx][i][0]) |
			SD_BL_TF_POINT_1(settings->bltf[bw_idx][i][1]) |
			SD_BL_TF_POINT_2(settings->bltf[bw_idx][i][2]) |
			SD_BL_TF_POINT_3(settings->bltf[bw_idx][i][3]);
		tegra_dc_writel(dc, val, DC_DISP_SD_BL_TF(i));

		dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
	}

	/* Write Coeff */
	val = SD_CSC_COEFF_R(settings->coeff.r) |
		SD_CSC_COEFF_G(settings->coeff.g) |
		SD_CSC_COEFF_B(settings->coeff.b);
	tegra_dc_writel(dc, val, DC_DISP_SD_CSC_COEFF);
	dev_dbg(&dc->ndev->dev, "  COEFF: 0x%08x\n", val);

	/* Write BL Params */
	val = SD_BLP_TIME_CONSTANT(settings->blp.time_constant) |
		SD_BLP_STEP(settings->blp.step);
	tegra_dc_writel(dc, val, DC_DISP_SD_BL_PARAMETERS);
	dev_dbg(&dc->ndev->dev, "  BLP: 0x%08x\n", val);

	/* Write Auto/Manual PWM */
	val = (settings->use_auto_pwm) ? SD_BLC_MODE_AUTO : SD_BLC_MODE_MAN;
	tegra_dc_writel(dc, val, DC_DISP_SD_BL_CONTROL);
	dev_dbg(&dc->ndev->dev, "  BL_CONTROL: 0x%08x\n", val);

	/* Write Flicker Control */
	val = SD_FC_TIME_LIMIT(settings->fc.time_limit) |
		SD_FC_THRESHOLD(settings->fc.threshold);
	tegra_dc_writel(dc, val, DC_DISP_SD_FLICKER_CONTROL);
	dev_dbg(&dc->ndev->dev, "  FLICKER_CONTROL: 0x%08x\n", val);

	/* Manage SD Control */
	val = 0;
	/* Stay in manual correction mode until the next flip. */
	val |= SD_CORRECTION_MODE_MAN;
	/* Enable / One-Shot */
	val |= (settings->enable == 2) ?
		(SD_ENABLE_ONESHOT | SD_ONESHOT_ENABLE) :
		SD_ENABLE_NORMAL;
	/* HW Update Delay */
	val |= SD_HW_UPDATE_DLY(settings->hw_update_delay);
	/* Video Luma */
	val |= (settings->use_vid_luma) ? SD_USE_VID_LUMA : 0;
	/* Aggressiveness */
	val |= SD_AGGRESSIVENESS(settings->aggressiveness);
	/* Bin Width (value derived above) */
	val |= bw;
	/* Finally, Write SD Control */
	tegra_dc_writel(dc, val, DC_DISP_SD_CONTROL);
	dev_dbg(&dc->ndev->dev, "  SD_CONTROL: 0x%08x\n", val);

	/* set the brightness pointer */
	sd_brightness = settings->sd_brightness;

	/* note that we're in manual K until the next flip */
	atomic_set(&man_k_until_blank, 1);
}
/* Functional initialization */
void nvsd_init(struct tegra_dc *dc, struct tegra_dc_sd_settings *settings)
{
	u32 i = 0;
	u32 val = 0;
	u32 bw_idx = 0;
	/* TODO: check if HW says SD's available */

	/* If SD's not present or disabled, clear the register and return. */
	if (!settings || settings->enable == 0) {
		/* clear the brightness val, too. */
		if (sd_brightness)
			atomic_set(sd_brightness, 255);

		sd_brightness = NULL;

		if (settings)
			settings->phase_settings_step = 0;
		tegra_dc_writel(dc, 0, DC_DISP_SD_CONTROL);
		return;
	}

	dev_dbg(&dc->ndev->dev, "NVSD Init:\n");

	/* init agg_priorities */
	if (!settings->agg_priorities.agg[0])
		settings->agg_priorities.agg[0] = settings->aggressiveness;

	/* WAR: Settings will not be valid until the next flip.
	 * Thus, set manual K to either HW's current value (if
	 * we're already enabled) or a non-effective value (if
	 * we're about to enable). */
	val = tegra_dc_readl(dc, DC_DISP_SD_CONTROL);

	if (val & SD_ENABLE_NORMAL)
		i = tegra_dc_readl(dc, DC_DISP_SD_HW_K_VALUES);
	else
		i = 0; /* 0 values for RGB = 1.0, i.e. non-affected */

	tegra_dc_writel(dc, i, DC_DISP_SD_MAN_K_VALUES);
	/* Enable manual correction mode here so that changing the
	 * settings won't immediately impact display dehavior. */
	val |= SD_CORRECTION_MODE_MAN;
	tegra_dc_writel(dc, val, DC_DISP_SD_CONTROL);

	bw_idx = nvsd_get_bw_idx(settings);

	/* Write LUT */
	if (!settings->cmd) {
		dev_dbg(&dc->ndev->dev, "  LUT:\n");

		for (i = 0; i < DC_DISP_SD_LUT_NUM; i++) {
			val = SD_LUT_R(settings->lut[bw_idx][i].r) |
				SD_LUT_G(settings->lut[bw_idx][i].g) |
				SD_LUT_B(settings->lut[bw_idx][i].b);
			tegra_dc_writel(dc, val, DC_DISP_SD_LUT(i));

			dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
		}
	}

	/* Write BL TF */
	if (!settings->cmd) {
		dev_dbg(&dc->ndev->dev, "  BL_TF:\n");

		for (i = 0; i < DC_DISP_SD_BL_TF_NUM; i++) {
			val = SD_BL_TF_POINT_0(settings->bltf[bw_idx][i][0]) |
				SD_BL_TF_POINT_1(settings->bltf[bw_idx][i][1]) |
				SD_BL_TF_POINT_2(settings->bltf[bw_idx][i][2]) |
				SD_BL_TF_POINT_3(settings->bltf[bw_idx][i][3]);

			tegra_dc_writel(dc, val, DC_DISP_SD_BL_TF(i));

			dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
		}
	} else if ((settings->cmd & PHASE_IN)) {
		settings->cmd &= ~PHASE_IN;
		/* Write NO_OP values for BLTF */
		for (i = 0; i < DC_DISP_SD_BL_TF_NUM; i++) {
			val = SD_BL_TF_POINT_0(0xFF) |
				SD_BL_TF_POINT_1(0xFF) |
				SD_BL_TF_POINT_2(0xFF) |
				SD_BL_TF_POINT_3(0xFF);

			tegra_dc_writel(dc, val, DC_DISP_SD_BL_TF(i));

			dev_dbg(&dc->ndev->dev, "    %d: 0x%08x\n", i, val);
		}
	}

	/* Set step correctly on init */
	if (!settings->cmd && settings->phase_in_settings) {
		settings->num_phase_in_steps = STEPS_PER_AGG_LVL *
			settings->aggressiveness;
		settings->phase_settings_step = settings->enable ?
			settings->num_phase_in_steps : 0;
	}

	/* Write Coeff */
	val = SD_CSC_COEFF_R(settings->coeff.r) |
		SD_CSC_COEFF_G(settings->coeff.g) |
		SD_CSC_COEFF_B(settings->coeff.b);
	tegra_dc_writel(dc, val, DC_DISP_SD_CSC_COEFF);
	dev_dbg(&dc->ndev->dev, "  COEFF: 0x%08x\n", val);

	/* Write BL Params */
	val = SD_BLP_TIME_CONSTANT(settings->blp.time_constant) |
		SD_BLP_STEP(settings->blp.step);
	tegra_dc_writel(dc, val, DC_DISP_SD_BL_PARAMETERS);
	dev_dbg(&dc->ndev->dev, "  BLP: 0x%08x\n", val);

	/* Write Auto/Manual PWM */
	val = (settings->use_auto_pwm) ? SD_BLC_MODE_AUTO : SD_BLC_MODE_MAN;
	tegra_dc_writel(dc, val, DC_DISP_SD_BL_CONTROL);
	dev_dbg(&dc->ndev->dev, "  BL_CONTROL: 0x%08x\n", val);

	/* Write Flicker Control */
	val = SD_FC_TIME_LIMIT(settings->fc.time_limit) |
		SD_FC_THRESHOLD(settings->fc.threshold);
	tegra_dc_writel(dc, val, DC_DISP_SD_FLICKER_CONTROL);
	dev_dbg(&dc->ndev->dev, "  FLICKER_CONTROL: 0x%08x\n", val);

	/* Manage SD Control */
	val = 0;
	/* Stay in manual correction mode until the next flip. */
	val |= SD_CORRECTION_MODE_MAN;
	/* Enable / One-Shot */
	val |= (settings->enable == 2) ?
		(SD_ENABLE_ONESHOT | SD_ONESHOT_ENABLE) :
		SD_ENABLE_NORMAL;
	/* HW Update Delay */
	val |= SD_HW_UPDATE_DLY(settings->hw_update_delay);
	/* Video Luma */
	val |= (settings->use_vid_luma) ? SD_USE_VID_LUMA : 0;
	/* Aggressiveness */
	val |= SD_AGGRESSIVENESS(settings->aggressiveness);
	/* Bin Width (value derived from bw_idx) */
	val |= bw_idx << 3;
	/* Finally, Write SD Control */
	tegra_dc_writel(dc, val, DC_DISP_SD_CONTROL);
	dev_dbg(&dc->ndev->dev, "  SD_CONTROL: 0x%08x\n", val);

	/* set the brightness pointer */
	sd_brightness = settings->sd_brightness;

	/* note that we're in manual K until the next flip */
	atomic_set(&man_k_until_blank, 1);
}