void printTempAndHumidity(void)
{
unsigned char noError = 1;
value humi_val,temp_val;
// Wait at least 11ms after power-up (chapter 3.1)
delay(20);
// Set up the SHT1x Data and Clock Pins
SHT1x_InitPins();
// Reset the SHT1x
SHT1x_Reset();
// Request Temperature measurement
noError = SHT1x_Measure_Start( SHT1xMeaT );
if (!noError) {
return;
}
// Read Temperature measurement
noError = SHT1x_Get_Measure_Value( (unsigned short int*) &temp_val.i );
if (!noError) {
return;
}
// Request Humidity Measurement
noError = SHT1x_Measure_Start( SHT1xMeaRh );
if (!noError) {
return;
}
// Read Humidity measurement
noError = SHT1x_Get_Measure_Value( (unsigned short int*) &humi_val.i );
if (!noError) {
return;
}
// Convert intergers to float and calculate true values
temp_val.f = (float)temp_val.i;
humi_val.f = (float)humi_val.i;
// Calculate Temperature and Humidity
SHT1x_Calc(&humi_val.f, &temp_val.f);
//Print the Temperature to the console
printf("Temperature: %0.2f%cC\n",temp_val.f,0x00B0);
//Print the Temperature in Fahrenheight
printf("Temperature: %0.2f%cF\n", ((temp_val.f*9)/5)+32,0x00B0);
//Print the Humidity to the console
printf("Humidity: %0.2f%%\n",humi_val.f);
//Calculate and print the Dew Point
float fDewPoint;
SHT1x_CalcDewpoint(humi_val.f ,temp_val.f, &fDewPoint);
printf("Dewpoint: %0.2f%cC\n",fDewPoint,0x00B0);
}
void printTempAndHumidity(void)
{
unsigned char noError = 1;
value humi_val,temp_val;
// Wait at least 11ms after power-up (chapter 3.1)
delay(20);
// Set up the SHT1x Data and Clock Pins
SHT1x_InitPins();
// Reset the SHT1x
SHT1x_Reset();
// Request Humidity Measurement
noError = SHT1x_Measure_Start( SHT1xMeaRh );
if (!noError) {
printf("\nError: Requesting humidity!\n");
return;
}
// Read Humidity measurement
noError = SHT1x_Get_Measure_Value( (unsigned short int*) &humi_val.i );
if (!noError) {
printf("\nError: Reading humidity!\n");
return;
}
// Convert intergers to float and calculate true values
humi_val.f = (float)humi_val.i;
// Calculate Temperature and Humidity
SHT1x_Calc(&humi_val.f, &temp_val.f);
//Print the Humidity to the console
printf("%0.2f\n",humi_val.f);
}