void KVSpectroDetector::AddAbsorberLayer( TGeoVolume *vol, Bool_t active){
// Add an absorber layer to the detector made from the shape of the
// volume.
// If active = kTRUE the layer is set active.
TGeoMaterial* material = vol->GetMaterial();
KVIonRangeTableMaterial* irmat = KVMaterial::GetRangeTable()->GetMaterial(material);
if(!irmat){
Warning("AddAbsorberLayer", "Unknown material %s/%s used in layer %s of detector %s",
material->GetName(), material->GetTitle(), vol->GetName(), GetName());
return;
}
TGeoBBox* sh = dynamic_cast<TGeoBBox*>(vol->GetShape());
if(!sh) {
Warning("AddAbsorberLayer", "Unknown shape class %s used in layer %s of detector %s",
vol->GetShape()->ClassName(), vol->GetName(), GetName());
return; // just in case - for now, all shapes derive from TGeoBBox...
}
Double_t width = 2.*sh->GetDZ(); // thickness in centimetres
KVMaterial* absorber;
if( irmat->IsGas() ){
Double_t p = material->GetPressure();
Double_t T = material->GetTemperature();
absorber = new KVMaterial(irmat->GetType(), width, p, T);
}
else
absorber = new KVMaterial(irmat->GetType(), width);
KVDetector::AddAbsorber(absorber);
ClearHits();
if( active ) SetActiveLayer( GetListOfAbsorbers()->GetEntries()-1 );
}
bool GERBVIEW_FRAME::Clear_DrawLayers( bool query )
{
if( GetGerberLayout() == NULL )
return false;
if( query && GetScreen()->IsModify() )
{
if( !IsOK( this, _( "Current data will be lost?" ) ) )
return false;
}
if( auto canvas = GetGalCanvas() )
{
canvas->GetView()->Clear();
}
GetImagesList()->DeleteAllImages();
GetGerberLayout()->SetBoundingBox( EDA_RECT() );
SetActiveLayer( 0 );
ReFillLayerWidget();
syncLayerBox();
return true;
}
bool GERBVIEW_FRAME::LoadZipArchiveFile( const wxString& aFullFileName )
{
#define ZipFileExtension "zip"
wxFileName filename = aFullFileName;
wxString currentPath;
if( !filename.IsOk() )
{
// Use the current working directory if the file name path does not exist.
if( filename.DirExists() )
currentPath = filename.GetPath();
else
currentPath = m_mruPath;
wxFileDialog dlg( this,
_( "Open Zip File" ),
currentPath,
filename.GetFullName(),
ZipFileWildcard(),
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
return false;
filename = dlg.GetPath();
currentPath = wxGetCwd();
m_mruPath = currentPath;
}
else
{
currentPath = filename.GetPath();
m_mruPath = currentPath;
}
wxString msg;
WX_STRING_REPORTER reporter( &msg );
if( filename.IsOk() )
unarchiveFiles( filename.GetFullPath(), &reporter );
Zoom_Automatique( false );
// Synchronize layers tools with actual active layer:
ReFillLayerWidget();
SetActiveLayer( GetActiveLayer() );
m_LayersManager->UpdateLayerIcons();
syncLayerBox();
if( !msg.IsEmpty() )
{
wxSafeYield(); // Allows slice of time to redraw the screen
// to refresh widgets, before displaying messages
HTML_MESSAGE_BOX mbox( this, _( "Messages" ) );
mbox.ListSet( msg );
mbox.ShowModal();
}
return true;
}
KVBIC::KVBIC(Float_t pressure, Float_t bomb): KVChIo()
{
//BIC detector.
//Give pressure in Torr
//
//Segmentation index = 1
//because particles passing through BIC can only hit 1 detector - SIB - behind it
//this is analogous to the Si-CsI telescopes of ring 1.
//The type of these detectors is "BIC"
//Pressure units are Torr
SetType("BIC");
SetSegment(1);
fLinCal = 0;
fBomb = bomb;
//build detector
AddAbsorber(new KVMaterial("Myl", 1.5 * KVUnits::um)); //mylar entry window
Float_t e = GetEffectiveEntryThickness();
KVMaterial* gas = new KVMaterial("CF4", e * KVUnits::mm, pressure);
AddAbsorber(gas); //gas between two windows
AddAbsorber(new KVMaterial("Myl", 1.0 * KVUnits::um)); //interior window
gas = new KVMaterial("CF4", 60 * KVUnits::mm, pressure);
AddAbsorber(gas); //main body of gas
SetActiveLayer(gas); //active layer - energy loss is measured
AddAbsorber(new KVMaterial("Myl", 1.0 * KVUnits::um)); //2nd interor window
gas = new KVMaterial("CF4", e * KVUnits::mm, pressure);
AddAbsorber(gas); //gas between two exit windows
AddAbsorber(new KVMaterial("Myl", 1.5 * KVUnits::um)); //exit window
}
void KVSpectroDetector::init(){
//default initialisations
SetActiveLayer(-1); // Necessary to remove some warning with GetPressure and GetTemperature.
fActiveVolumes = NULL;
fFocalToTarget = NULL;
fNabsorbers = 0;
fTotThick = 0;
//use by default random position
SetBit( kRdmPos );
//a KVSpectroDetector can be used in a ID telescope
SetBit( kOKforID );
}
//______________________________________________________________________________
KVChIo::KVChIo(Float_t pressure, Float_t thick):KVINDRADetector("Myl", 2.5*KVUnits::um)
{
// Make an INDRA ChIo: 2.5micron mylar windows enclosing 'thick' cm of C3F8,
// give gas pressure in mbar
// By default 'thick'=5cm
// The type of these detectors is "CI"
//gas layer
KVMaterial *mat = new KVMaterial("C3F8", thick, pressure*KVUnits::mbar);
AddAbsorber(mat);
SetActiveLayer(mat); //gas is the active layer
// mylar for second window
mat = new KVMaterial("Myl", 2.5*KVUnits::um);
AddAbsorber(mat);
SetType("CI");
init();
}
void PCB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
{
int id = event.GetId();
wxFileName fn;
switch( id )
{
case ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG:
m_show_layer_manager_tools = ! m_show_layer_manager_tools;
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG,
m_show_layer_manager_tools ?
_("Hide &Layers Manager" ) : _("Show &Layers Manager" ));
break;
case ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR:
m_show_microwave_tools = ! m_show_microwave_tools;
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR,
m_show_microwave_tools ?
_( "Hide Microwave Toolbar" ): _( "Show Microwave Toolbar" ));
break;
case ID_PCB_LAYERS_SETUP:
if( InvokeLayerSetup( this, GetBoard() ) )
{
LAYER_ID cur_layer = GetActiveLayer();
// If after showing the dialog the user has removed the active layer,
// then select a new active layer (front copper layer).
if( !GetBoard()->GetEnabledLayers()[ cur_layer ] )
cur_layer = F_Cu;
SetActiveLayer( cur_layer );
OnModify();
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
}
break;
case ID_PCB_LIB_WIZARD:
case ID_PCB_LIB_TABLE_EDIT:
{
bool tableChanged = false;
int r = 0;
if( id == ID_PCB_LIB_TABLE_EDIT )
r = InvokePcbLibTableEditor( this, &GFootprintTable, Prj().PcbFootprintLibs() );
else
r = InvokeFootprintWizard( this, &GFootprintTable, Prj().PcbFootprintLibs() );
if( r & 1 )
{
try
{
FILE_OUTPUTFORMATTER sf( FP_LIB_TABLE::GetGlobalTableFileName() );
GFootprintTable.Format( &sf, 0 );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving the global footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText.GetData() )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
// If no board file is defined, do not save the project specific library table. It
// is kept in memory and created in the path when the new board is saved.
if( (r & 2) && !GetBoard()->GetFileName().IsEmpty() )
{
wxString tblName = Prj().FootprintLibTblName();
try
{
Prj().PcbFootprintLibs()->Save( tblName );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving project specific footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
FOOTPRINT_VIEWER_FRAME* viewer;
if( tableChanged && (viewer = (FOOTPRINT_VIEWER_FRAME*)Kiway().Player( FRAME_PCB_MODULE_VIEWER, false )) != NULL )
{
viewer->ReCreateLibraryList();
}
}
break;
case ID_PCB_3DSHAPELIB_WIZARD:
#ifdef BUILD_GITHUB_PLUGIN
Invoke3DShapeLibsDownloaderWizard( this );
#endif
break;
case ID_PCB_MASK_CLEARANCE:
{
DIALOG_PADS_MASK_CLEARANCE dlg( this );
if( dlg.ShowModal() == 1 && IsGalCanvasActive() )
{
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
module->ViewUpdate();
GetGalCanvas()->Refresh();
}
}
break;
case wxID_PREFERENCES:
{
DIALOG_GENERALOPTIONS dlg( this );
dlg.ShowModal();
}
break;
case ID_PCB_PAD_SETUP:
InstallPadOptionsFrame( NULL );
break;
case ID_CONFIG_SAVE:
SaveProjectSettings( true );
break;
case ID_CONFIG_READ:
{
fn = GetBoard()->GetFileName();
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
break;
if( !wxFileExists( dlg.GetPath() ) )
{
wxString msg = wxString::Format( _(
"File %s not found" ),
GetChars( dlg.GetPath() )
);
DisplayError( this, msg );
break;
}
wxString pro_file = dlg.GetPath();
Prj().ConfigLoad( Kiface().KifaceSearch(), GROUP_PCB, GetProjectFileParameters(), pro_file );
}
break;
// Hotkey IDs
case ID_PREFERENCES_HOTKEY_EXPORT_CONFIG:
ExportHotkeyConfigToFile( g_Board_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_IMPORT_CONFIG:
ImportHotkeyConfigFromFile( g_Board_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_SHOW_EDITOR:
InstallHotkeyFrame( this, g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
// Display current hotkey list for Pcbnew.
DisplayHotkeyList( this, g_Board_Editor_Hokeys_Descr );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::Process_Config error" ) );
}
}
bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
unsigned itmp;
if( aTrack == NULL )
{
if( GetActiveLayer() != GetScreen()->m_Route_Layer_TOP )
SetActiveLayer( GetScreen()->m_Route_Layer_TOP );
else
SetActiveLayer( GetScreen()->m_Route_Layer_BOTTOM );
UpdateStatusBar();
return true;
}
// Avoid more than one via on the current location:
if( GetBoard()->GetViaByPosition( g_CurrentTrackSegment->GetEnd(),
g_CurrentTrackSegment->GetLayer() ) )
return false;
for( TRACK* segm = g_FirstTrackSegment; segm; segm = segm->Next() )
{
if( segm->Type() == PCB_VIA_T && g_CurrentTrackSegment->GetEnd() == segm->GetStart() )
return false;
}
// Is the current segment Ok (no DRC error) ?
if( g_Drc_On )
{
if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
// DRC error, the change layer is not made
return false;
// Handle 2 segments.
if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
{
if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(), GetBoard()->m_Track ) )
return false;
}
}
/* Save current state before placing a via.
* If the via cannot be placed this current state will be reused
*/
itmp = g_CurrentTrackList.GetCount();
Begin_Route( g_CurrentTrackSegment, DC );
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// create the via
VIA* via = new VIA( GetBoard() );
via->SetFlags( IS_NEW );
via->SetViaType( GetDesignSettings().m_CurrentViaType );
via->SetNetCode( GetBoard()->GetHighLightNetCode() );
via->SetPosition( g_CurrentTrackSegment->GetEnd() );
// for microvias, the size and hole will be changed later.
via->SetWidth( GetDesignSettings().GetCurrentViaSize());
via->SetDrill( GetDesignSettings().GetCurrentViaDrill() );
// Usual via is from copper to component.
// layer pair is B_Cu and F_Cu.
via->SetLayerPair( B_Cu, F_Cu );
LAYER_ID first_layer = GetActiveLayer();
LAYER_ID last_layer;
// prepare switch to new active layer:
if( first_layer != GetScreen()->m_Route_Layer_TOP )
last_layer = GetScreen()->m_Route_Layer_TOP;
else
last_layer = GetScreen()->m_Route_Layer_BOTTOM;
// Adjust the actual via layer pair
switch( via->GetViaType() )
{
case VIA_BLIND_BURIED:
via->SetLayerPair( first_layer, last_layer );
break;
case VIA_MICROVIA: // from external to the near neighbor inner layer
{
LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );
if( first_layer == B_Cu )
last_layer = last_inner_layer;
else if( first_layer == F_Cu )
last_layer = In1_Cu;
else if( first_layer == last_inner_layer )
last_layer = B_Cu;
else if( first_layer == In1_Cu )
last_layer = F_Cu;
// else error: will be removed later
via->SetLayerPair( first_layer, last_layer );
// Update diameter and hole size, which where set previously
// for normal vias
NETINFO_ITEM* net = via->GetNet();
via->SetWidth( net->GetMicroViaSize() );
via->SetDrill( net->GetMicroViaDrillSize() );
}
break;
default:
break;
}
if( g_Drc_On && BAD_DRC == m_drc->Drc( via, GetBoard()->m_Track ) )
{
// DRC fault: the Via cannot be placed here ...
delete via;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// delete the track(s) added in Begin_Route()
while( g_CurrentTrackList.GetCount() > itmp )
{
Delete_Segment( DC, g_CurrentTrackSegment );
}
SetCurItem( g_CurrentTrackSegment, false );
// Refresh DRC diag, erased by previous calls
if( m_drc->GetCurrentMarker() )
SetMsgPanel( m_drc->GetCurrentMarker() );
return false;
}
SetActiveLayer( last_layer );
TRACK* lastNonVia = g_CurrentTrackSegment;
/* A new via was created. It was Ok.
*/
g_CurrentTrackList.PushBack( via );
/* The via is now in linked list and we need a new track segment
* after the via, starting at via location.
* it will become the new current segment (from via to the mouse cursor)
*/
TRACK* track = (TRACK*)lastNonVia->Clone();
/* the above creates a new segment from the last entered segment, with the
* current width, flags, netcode, etc... values.
* layer, start and end point are not correct,
* and will be modified next
*/
// set the layer to the new value
track->SetLayer( GetActiveLayer() );
/* the start point is the via position and the end point is the cursor
* which also is on the via (will change when moving mouse)
*/
track->SetEnd( via->GetStart() );
track->SetStart( via->GetStart() );
g_CurrentTrackList.PushBack( track );
if( g_TwoSegmentTrackBuild )
{
// Create a second segment (we must have 2 track segments to adjust)
g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
}
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
SetMsgPanel( via );
UpdateStatusBar();
return true;
}
bool GERBVIEW_FRAME::unarchiveFiles( const wxString& aFullFileName, REPORTER* aReporter )
{
wxString msg;
// Extract the path of aFullFileName. We use it to store temporary files
wxFileName fn( aFullFileName );
wxString unzipDir = fn.GetPath();
wxFFileInputStream zipFile( aFullFileName );
if( !zipFile.IsOk() )
{
if( aReporter )
{
msg.Printf( _( "Zip file \"%s\" cannot be opened" ), GetChars( aFullFileName ) );
aReporter->Report( msg, REPORTER::RPT_ERROR );
}
return false;
}
// Update the list of recent zip files.
UpdateFileHistory( aFullFileName, &m_zipFileHistory );
// The unzipped file in only a temporary file. Give it a filename
// which cannot conflict with an usual filename.
// TODO: make Read_GERBER_File() and Read_EXCELLON_File() able to
// accept a stream, and avoid using a temp file.
wxFileName temp_fn( "$tempfile.tmp" );
temp_fn.MakeAbsolute( unzipDir );
wxString unzipped_tempfile = temp_fn.GetFullPath();
bool success = true;
wxZipInputStream zipArchive( zipFile );
wxZipEntry* entry;
bool reported_no_more_layer = false;
while( ( entry = zipArchive.GetNextEntry() ) )
{
wxString fname = entry->GetName();
wxFileName uzfn = fname;
wxString curr_ext = uzfn.GetExt().Lower();
// The archive contains Gerber and/or Excellon drill files. Use the right loader.
// However it can contain a few other files (reports, pdf files...),
// which will be skipped.
// Gerber files ext is usually "gbr", but can be also an other value, starting by "g"
// old gerber files ext from kicad is .pho
// drill files do not have a well defined ext
// It is .drl in kicad, but .txt in Altium for instance
// Allows only .drl for drill files.
if( curr_ext[0] != 'g' && curr_ext != "pho" && curr_ext != "drl" )
{
if( aReporter )
{
msg.Printf( _( "Info: skip file <i>\"%s\"</i> (unknown type)\n" ),
GetChars( entry->GetName() ) );
aReporter->Report( msg, REPORTER::RPT_WARNING );
}
continue;
}
int layer = GetActiveLayer();
if( layer == NO_AVAILABLE_LAYERS )
{
success = false;
if( aReporter )
{
if( !reported_no_more_layer )
aReporter->Report( MSG_NO_MORE_LAYER, REPORTER::RPT_ERROR );
reported_no_more_layer = true;
// Report the name of not loaded files:
msg.Printf( MSG_NOT_LOADED, GetChars( entry->GetName() ) );
aReporter->Report( msg, REPORTER::RPT_ERROR );
}
delete entry;
continue;
}
// Create the unzipped temporary file:
{
wxFFileOutputStream temporary_ofile( unzipped_tempfile );
if( temporary_ofile.Ok() )
temporary_ofile.Write( zipArchive );
else
{
success = false;
if( aReporter )
{
msg.Printf( _( "<b>Unable to create temporary file \"%s\"</b>\n"),
GetChars( unzipped_tempfile ) );
aReporter->Report( msg, REPORTER::RPT_ERROR );
}
}
}
bool read_ok = true;
if( curr_ext[0] == 'g' || curr_ext == "pho" )
{
// Read gerber files: each file is loaded on a new GerbView layer
read_ok = Read_GERBER_File( unzipped_tempfile );
}
else // if( curr_ext == "drl" )
{
read_ok = Read_EXCELLON_File( unzipped_tempfile );
}
delete entry;
// The unzipped file is only a temporary file, delete it.
wxRemoveFile( unzipped_tempfile );
if( !read_ok )
{
success = false;
if( aReporter )
{
msg.Printf( _("<b>unzipped file %s read error</b>\n"),
GetChars( unzipped_tempfile ) );
aReporter->Report( msg, REPORTER::RPT_ERROR );
}
}
else
{
GERBER_FILE_IMAGE* gerber_image = GetGbrImage( layer );
if( gerber_image )
gerber_image->m_FileName = fname;
layer = getNextAvailableLayer( layer );
SetActiveLayer( layer, false );
}
}
return success;
}
bool GERBVIEW_FRAME::LoadExcellonFiles( const wxString& aFullFileName )
{
wxString filetypes;
wxArrayString filenamesList;
wxFileName filename = aFullFileName;
wxString currentPath;
if( !filename.IsOk() )
{
filetypes = DrillFileWildcard();
filetypes << wxT( "|" );
/* All filetypes */
filetypes += wxGetTranslation( AllFilesWildcard );
/* Use the current working directory if the file name path does not exist. */
if( filename.DirExists() )
currentPath = filename.GetPath();
else
currentPath = m_mruPath;
wxFileDialog dlg( this, _( "Open Drill File" ),
currentPath, filename.GetFullName(), filetypes,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_MULTIPLE | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
return false;
dlg.GetPaths( filenamesList );
currentPath = wxGetCwd();
m_mruPath = currentPath;
}
else
{
filenamesList.Add( aFullFileName );
currentPath = filename.GetPath();
m_mruPath = currentPath;
}
// Read Excellon drill files: each file is loaded on a new GerbView layer
bool success = true;
int layer = GetActiveLayer();
// Manage errors when loading files
wxString msg;
WX_STRING_REPORTER reporter( &msg );
for( unsigned ii = 0; ii < filenamesList.GetCount(); ii++ )
{
filename = filenamesList[ii];
if( !filename.IsAbsolute() )
filename.SetPath( currentPath );
m_lastFileName = filename.GetFullPath();
SetActiveLayer( layer, false );
if( Read_EXCELLON_File( filename.GetFullPath() ) )
{
// Update the list of recent drill files.
UpdateFileHistory( filename.GetFullPath(), &m_drillFileHistory );
layer = getNextAvailableLayer( layer );
if( layer == NO_AVAILABLE_LAYERS && ii < filenamesList.GetCount()-1 )
{
success = false;
reporter.Report( MSG_NO_MORE_LAYER, REPORTER::RPT_ERROR );
// Report the name of not loaded files:
ii += 1;
while( ii < filenamesList.GetCount() )
{
filename = filenamesList[ii++];
wxString txt;
txt.Printf( MSG_NOT_LOADED,
GetChars( filename.GetFullName() ) );
reporter.Report( txt, REPORTER::RPT_ERROR );
}
break;
}
SetActiveLayer( layer, false );
}
}
if( !success )
{
HTML_MESSAGE_BOX mbox( this, _( "Errors" ) );
mbox.ListSet( msg );
mbox.ShowModal();
}
Zoom_Automatique( false );
// Synchronize layers tools with actual active layer:
ReFillLayerWidget();
SetActiveLayer( GetActiveLayer() );
m_LayersManager->UpdateLayerIcons();
syncLayerBox();
return success;
}
bool GERBVIEW_FRAME::LoadGerberFiles( const wxString& aFullFileName )
{
wxString filetypes;
wxArrayString filenamesList;
wxFileName filename = aFullFileName;
wxString currentPath;
if( !filename.IsOk() )
{
/* Standard gerber filetypes
* (See http://en.wikipedia.org/wiki/Gerber_File)
* the .gbr (.pho in legacy files) extension is the default used in Pcbnew
* However there are a lot of other extensions used for gerber files
* Because the first letter is usually g, we accept g* as extension
* (Mainly internal copper layers do not have specific extension,
* and filenames are like *.g1, *.g2 *.gb1 ...).
* Now (2014) Ucamco (the company which manages the Gerber format) encourages
* use of .gbr only and the Gerber X2 file format.
*/
filetypes = _( "Gerber files (.g* .lgr .pho)" );
filetypes << wxT("|");
filetypes += wxT("*.g*;*.G*;*.pho;*.PHO" );
filetypes << wxT("|");
/* Special gerber filetypes */
filetypes += _( "Top layer (*.GTL)|*.GTL;*.gtl|" );
filetypes += _( "Bottom layer (*.GBL)|*.GBL;*.gbl|" );
filetypes += _( "Bottom solder resist (*.GBS)|*.GBS;*.gbs|" );
filetypes += _( "Top solder resist (*.GTS)|*.GTS;*.gts|" );
filetypes += _( "Bottom overlay (*.GBO)|*.GBO;*.gbo|" );
filetypes += _( "Top overlay (*.GTO)|*.GTO;*.gto|" );
filetypes += _( "Bottom paste (*.GBP)|*.GBP;*.gbp|" );
filetypes += _( "Top paste (*.GTP)|*.GTP;*.gtp|" );
filetypes += _( "Keep-out layer (*.GKO)|*.GKO;*.gko|" );
filetypes += _( "Mechanical layers (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|" );
filetypes += _( "Top Pad Master (*.GPT)|*.GPT;*.gpt|" );
filetypes += _( "Bottom Pad Master (*.GPB)|*.GPB;*.gpb|" );
// All filetypes
filetypes += AllFilesWildcard;
// Use the current working directory if the file name path does not exist.
if( filename.DirExists() )
currentPath = filename.GetPath();
else
{
currentPath = m_mruPath;
// On wxWidgets 3.1 (bug?) the path in wxFileDialog is ignored when
// finishing by the dir separator. Remove it if any:
if( currentPath.EndsWith( '\\' ) || currentPath.EndsWith( '/' ) )
currentPath.RemoveLast();
}
wxFileDialog dlg( this, _( "Open Gerber File" ),
currentPath,
filename.GetFullName(),
filetypes,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_MULTIPLE | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
return false;
dlg.GetPaths( filenamesList );
// @todo Take a closer look at the CWD switching here. The current working directory
// gets changed by wxFileDialog because the wxFD_CHANGE_DIR flag is set. Is this the
// appropriate behavior? The current working directory is not returned to the previous
// value so this may be an issue elsewhere.
currentPath = wxGetCwd();
m_mruPath = currentPath;
}
else
{
filenamesList.Add( aFullFileName );
currentPath = filename.GetPath();
m_mruPath = currentPath;
}
// Set the busy cursor
wxBusyCursor wait;
// Read gerber files: each file is loaded on a new GerbView layer
bool success = true;
int layer = GetActiveLayer();
// Manage errors when loading files
wxString msg;
WX_STRING_REPORTER reporter( &msg );
for( unsigned ii = 0; ii < filenamesList.GetCount(); ii++ )
{
filename = filenamesList[ii];
if( !filename.IsAbsolute() )
filename.SetPath( currentPath );
m_lastFileName = filename.GetFullPath();
SetActiveLayer( layer, false );
if( Read_GERBER_File( filename.GetFullPath() ) )
{
UpdateFileHistory( m_lastFileName );
layer = getNextAvailableLayer( layer );
if( layer == NO_AVAILABLE_LAYERS && ii < filenamesList.GetCount()-1 )
{
success = false;
reporter.Report( MSG_NO_MORE_LAYER, REPORTER::RPT_ERROR );
// Report the name of not loaded files:
ii += 1;
while( ii < filenamesList.GetCount() )
{
filename = filenamesList[ii++];
wxString txt;
txt.Printf( MSG_NOT_LOADED,
GetChars( filename.GetFullName() ) );
reporter.Report( txt, REPORTER::RPT_ERROR );
}
break;
}
SetActiveLayer( layer, false );
}
}
if( !success )
{
HTML_MESSAGE_BOX mbox( this, _( "Errors" ) );
mbox.ListSet( msg );
mbox.ShowModal();
}
Zoom_Automatique( false );
// Synchronize layers tools with actual active layer:
ReFillLayerWidget();
SetActiveLayer( GetActiveLayer() );
m_LayersManager->UpdateLayerIcons();
syncLayerBox();
return success;
}
TRACK* PCB_EDIT_FRAME::Delete_Segment( wxDC* DC, TRACK* aTrack )
{
int current_net_code;
if( aTrack == NULL )
return NULL;
if( aTrack->IsNew() ) // Trace in progress, erase the last segment
{
if( g_CurrentTrackList.GetCount() > 0 )
{
LAYER_NUM previous_layer = GetActiveLayer();
DBG( g_CurrentTrackList.VerifyListIntegrity(); )
// Delete the current trace
ShowNewTrackWhenMovingCursor( m_canvas, DC, wxDefaultPosition, false );
// delete the most recently entered
delete g_CurrentTrackList.PopBack();
if( g_TwoSegmentTrackBuild )
{
// if in 2 track mode, and the next most recent is a segment
// not a via, and the one previous to that is a via, then
// delete up to the via.
if( g_CurrentTrackList.GetCount() >= 2
&& g_CurrentTrackSegment->Type() != PCB_VIA_T
&& g_CurrentTrackSegment->Back()->Type() == PCB_VIA_T )
{
delete g_CurrentTrackList.PopBack();
}
}
while( g_CurrentTrackSegment && g_CurrentTrackSegment->Type() == PCB_VIA_T )
{
delete g_CurrentTrackList.PopBack();
if( g_CurrentTrackSegment && g_CurrentTrackSegment->Type() != PCB_VIA_T )
previous_layer = g_CurrentTrackSegment->GetLayer();
}
// Correct active layer which could change if a via
// has been erased
SetActiveLayer( previous_layer );
UpdateStatusBar();
if( g_TwoSegmentTrackBuild ) // We must have 2 segments or more, or 0
{
if( g_CurrentTrackList.GetCount() == 1
&& g_CurrentTrackSegment->Type() != PCB_VIA_T )
{
delete g_CurrentTrackList.PopBack();
}
}
if( g_CurrentTrackList.GetCount() == 0 )
{
m_canvas->SetMouseCapture( NULL, NULL );
if( GetBoard()->IsHighLightNetON() )
HighLight( DC );
SetCurItem( NULL );
return NULL;
}
else
{
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
return g_CurrentTrackSegment;
}
}
int PCB_EDIT_FRAME::Begin_Zone( wxDC* DC )
{
ZONE_SETTINGS zoneInfo = GetZoneSettings();
// verify if s_CurrentZone exists (could be deleted since last selection) :
int ii;
for( ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
if( s_CurrentZone == GetBoard()->GetArea( ii ) )
break;
}
if( ii >= GetBoard()->GetAreaCount() ) // Not found: could be deleted since last selection
{
s_AddCutoutToCurrentZone = false;
s_CurrentZone = NULL;
}
ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour;
// Verify if a new zone is allowed on this layer:
if( zone == NULL )
{
if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT && !IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this,
_( "Error: a keepout area is allowed only on copper layers" ) );
return 0;
}
}
// If no zone contour in progress, a new zone is being created,
if( zone == NULL )
{
zone = GetBoard()->m_CurrentZoneContour = new ZONE_CONTAINER( GetBoard() );
zone->SetFlags( IS_NEW );
zone->SetTimeStamp( GetNewTimeStamp() );
}
if( zone->GetNumCorners() == 0 ) // Start a new contour: init zone params (net, layer ...)
{
if( !s_CurrentZone ) // A new outline is created, from scratch
{
ZONE_EDIT_T edited;
// Init zone params to reasonable values
zone->SetLayer( GetActiveLayer() );
// Prompt user for parameters:
m_canvas->SetIgnoreMouseEvents( true );
if( zone->IsOnCopperLayer() )
{
// Put a zone on a copper layer
if( GetBoard()->GetHighLightNetCode() > 0 )
{
zoneInfo.m_NetcodeSelection = GetBoard()->GetHighLightNetCode();
zone->SetNetCode( zoneInfo.m_NetcodeSelection );
}
double tmp = ZONE_THERMAL_RELIEF_GAP_MIL;
wxConfigBase* cfg = Kiface().KifaceSettings();
cfg->Read( ZONE_THERMAL_RELIEF_GAP_STRING_KEY, &tmp );
zoneInfo.m_ThermalReliefGap = KiROUND( tmp * IU_PER_MILS);
tmp = ZONE_THERMAL_RELIEF_COPPER_WIDTH_MIL;
cfg->Read( ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY, &tmp );
zoneInfo.m_ThermalReliefCopperBridge = KiROUND( tmp * IU_PER_MILS );
tmp = ZONE_CLEARANCE_MIL;
cfg->Read( ZONE_CLEARANCE_WIDTH_STRING_KEY, &tmp );
zoneInfo.m_ZoneClearance = KiROUND( tmp * IU_PER_MILS );
tmp = ZONE_THICKNESS_MIL;
cfg->Read( ZONE_MIN_THICKNESS_WIDTH_STRING_KEY, &tmp );
zoneInfo.m_ZoneMinThickness = KiROUND( tmp * IU_PER_MILS );
zoneInfo.m_CurrentZone_Layer = zone->GetLayer();
if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT )
{
zoneInfo.SetIsKeepout( true );
// Netcode, netname and some other settings are irrelevant,
// so ensure they are cleared
zone->SetNetCode( NETINFO_LIST::UNCONNECTED );
zoneInfo.SetCornerSmoothingType( ZONE_SETTINGS::SMOOTHING_NONE );
zoneInfo.SetCornerRadius( 0 );
edited = InvokeKeepoutAreaEditor( this, &zoneInfo );
}
else
{
zoneInfo.SetIsKeepout( false );
edited = InvokeCopperZonesEditor( this, &zoneInfo );
}
}
else // Put a zone on a non copper layer (technical layer)
{
zoneInfo.SetIsKeepout( false );
zoneInfo.m_NetcodeSelection = 0; // No net for non copper zones
edited = InvokeNonCopperZonesEditor( this, zone, &zoneInfo );
}
m_canvas->MoveCursorToCrossHair();
m_canvas->SetIgnoreMouseEvents( false );
if( edited == ZONE_ABORT )
{
GetBoard()->m_CurrentZoneContour = NULL;
delete zone;
return 0;
}
// Switch active layer to the selected zone layer
SetActiveLayer( zoneInfo.m_CurrentZone_Layer );
SetZoneSettings( zoneInfo );
}
else
{
// Start a new contour: init zone params (net and layer) from an existing
// zone (add cutout or similar zone)
zoneInfo.m_CurrentZone_Layer = s_CurrentZone->GetLayer();
SetActiveLayer( s_CurrentZone->GetLayer() );
zoneInfo << *s_CurrentZone;
SetZoneSettings( zoneInfo );
}
// Show the Net for zones on copper layers
if( IsCopperLayer( zoneInfo.m_CurrentZone_Layer ) &&
!zoneInfo.GetIsKeepout() )
{
if( s_CurrentZone )
{
zoneInfo.m_NetcodeSelection = s_CurrentZone->GetNetCode();
GetBoard()->SetZoneSettings( zoneInfo );
}
if( GetBoard()->IsHighLightNetON() )
{
HighLight( DC ); // Remove old highlight selection
}
GetBoard()->SetHighLightNet( zoneInfo.m_NetcodeSelection );
HighLight( DC );
}
if( !s_AddCutoutToCurrentZone )
s_CurrentZone = NULL; // the zone is used only once ("add similar zone" command)
}
// if first segment
if( zone->GetNumCorners() == 0 )
{
zoneInfo.ExportSetting( *zone );
zone->Outline()->Start( zoneInfo.m_CurrentZone_Layer,
GetCrossHairPosition().x,
GetCrossHairPosition().y,
zone->GetHatchStyle() );
zone->AppendCorner( GetCrossHairPosition() );
if( g_Drc_On && (m_drc->Drc( zone, 0 ) == BAD_DRC) && zone->IsOnCopperLayer() )
{
zone->ClearFlags();
zone->RemoveAllContours();
// use the form of SetCurItem() which does not write to the msg panel,
// SCREEN::SetCurItem(), so the DRC error remains on screen.
// PCB_EDIT_FRAME::SetCurItem() calls DisplayInfo().
GetScreen()->SetCurItem( NULL );
DisplayError( this,
_( "DRC error: this start point is inside or too close an other area" ) );
return 0;
}
SetCurItem( zone );
m_canvas->SetMouseCapture( Show_New_Edge_While_Move_Mouse, Abort_Zone_Create_Outline );
}
else // edge in progress:
{
ii = zone->GetNumCorners() - 1;
// edge in progress : the current corner coordinate was set
// by Show_New_Edge_While_Move_Mouse
if( zone->GetCornerPosition( ii - 1 ) != zone->GetCornerPosition( ii ) )
{
if( !g_Drc_On || !zone->IsOnCopperLayer() || ( m_drc->Drc( zone, ii - 1 ) == OK_DRC ) )
{
// Ok, we can add a new corner
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( DC, wxPoint(0,0), false );
zone->AppendCorner( GetCrossHairPosition() );
SetCurItem( zone ); // calls DisplayInfo().
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( DC, wxPoint(0,0), false );
}
}
}
return zone->GetNumCorners();
}
