void GLVertexDecompilerThread::Task()
{
m_parr.params.clear();
m_instr_count = 0;
for (int i = 0; i < m_max_instr_count; ++i)
m_instructions[i].reset();
for (u32 i = 0; m_instr_count < m_max_instr_count; m_instr_count++)
{
m_cur_instr = &m_instructions[m_instr_count];
d0.HEX = m_data[i++];
d1.HEX = m_data[i++];
d2.HEX = m_data[i++];
d3.HEX = m_data[i++];
src[0].src0l = d2.src0l;
src[0].src0h = d1.src0h;
src[1].src1 = d2.src1;
src[2].src2l = d3.src2l;
src[2].src2h = d2.src2h;
if(!d1.sca_opcode && !d1.vec_opcode)
{
m_body.push_back("//nop");
}
switch(d1.sca_opcode)
{
case 0x00: break; // NOP
case 0x01: SetDSTSca("$s"); break; // MOV
case 0x02: SetDSTSca("(1.0 / $s)"); break; // RCP
case 0x03: SetDSTSca("clamp(1.0 / $s, 5.42101e-20, 1.884467e19)"); break; // RCC
case 0x04: SetDSTSca("inversesqrt(abs($s))"); break; // RSQ
case 0x05: SetDSTSca("exp($s)"); break; // EXP
case 0x06: SetDSTSca("log($s)"); break; // LOG
case 0x07: SetDSTSca("vec4(1.0, $s.x, ($s.x > 0 ? exp2($s.w * log2($s.y)) : 0.0), 1.0)"); break; // LIT
//case 0x08: break; // BRA
case 0x09: // BRI : works differently (BRI o[1].x(TR) L0;)
//AddCode("$ifcond { $f(); return; }");
if (GetAddr() > m_instr_count)
{
AddCode("if(!$cond)");
AddCode("{");
m_cur_instr->open_scopes++;
m_instructions[GetAddr()].put_close_scopes++;
}
else
{
AddCode("} while ($cond);");
m_cur_instr->close_scopes++;
m_instructions[GetAddr()].do_count++;
}
break;
//case 0x0a: AddCode("$ifcond $f(); //CAL"); break; // CAL : works same as BRI
case 0x0b: AddCode("$ifcond $f(); //CLI"); break; // CLI : works same as BRI
case 0x0c: AddCode("$ifcond return;"); break; // RET : works like BRI but shorter (RET o[1].x(TR);)
case 0x0d: SetDSTSca("log2($s)"); break; // LG2
case 0x0e: SetDSTSca("exp2($s)"); break; // EX2
case 0x0f: SetDSTSca("sin($s)"); break; // SIN
case 0x10: SetDSTSca("cos($s)"); break; // COS
//case 0x11: break; // BRB : works differently (BRB o[1].x !b0, L0;)
//case 0x12: break; // CLB : works same as BRB
//case 0x13: break; // PSH : works differently (PSH o[1].x A0;)
//case 0x14: break; // POP : works differently (POP o[1].x;)
default:
m_body.push_back(fmt::Format("//Unknown vp sca_opcode 0x%x", fmt::by_value(d1.sca_opcode)));
ConLog.Error("Unknown vp sca_opcode 0x%x", fmt::by_value(d1.sca_opcode));
Emu.Pause();
break;
}
switch(d1.vec_opcode)
{
case 0x00: break; //NOP
case 0x01: SetDSTVec("$0"); break; //MOV
case 0x02: SetDSTVec("($0 * $1)"); break; //MUL
case 0x03: SetDSTVec("($0 + $2)"); break; //ADD
case 0x04: SetDSTVec("($0 * $1 + $2)"); break; //MAD
case 0x05: SetDSTVec("vec2(dot($0.xyz, $1.xyz), 0.0).xxxx"); break; //DP3
case 0x06: SetDSTVec("vec2(dot(vec4($0.xyz, 1.0), $1), 0.0).xxxx"); break; //DPH
case 0x07: SetDSTVec("vec2(dot($0, $1), 0.0).xxxx"); break; //DP4
case 0x08: SetDSTVec("vec2(distance($0, $1), 0.0).xxxx"); break; //DST
case 0x09: SetDSTVec("min($0, $1)"); break; //MIN
case 0x0a: SetDSTVec("max($0, $1)"); break; //MAX
case 0x0b: SetDSTVec("vec4(lessThan($0, $1))"); break; //SLT
case 0x0c: SetDSTVec("vec4(greaterThanEqual($0, $1))"); break; //SGE
case 0x0d: AddCode("$ifcond $a = ivec4($0)$am;"); break; //ARL
case 0x0e: SetDSTVec("fract($0)"); break; //FRC
case 0x0f: SetDSTVec("floor($0)"); break; //FLR
case 0x10: SetDSTVec("vec4(equal($0, $1))"); break; //SEQ
case 0x11: SetDSTVec("vec4(equal($0, vec4(0.0)))"); break; //SFL
case 0x12: SetDSTVec("vec4(greaterThan($0, $1))"); break; //SGT
case 0x13: SetDSTVec("vec4(lessThanEqual($0, $1))"); break; //SLE
case 0x14: SetDSTVec("vec4(notEqual($0, $1))"); break; //SNE
case 0x15: SetDSTVec("vec4(equal($0, vec4(1.0)))"); break; //STR
case 0x16: SetDSTVec("sign($0)"); break; //SSG
default:
m_body.push_back(fmt::Format("//Unknown vp opcode 0x%x", fmt::by_value(d1.vec_opcode)));
ConLog.Error("Unknown vp opcode 0x%x", fmt::by_value(d1.vec_opcode));
Emu.Pause();
break;
}
if(d3.end)
{
m_instr_count++;
if(i < m_data.size())
ConLog.Error("Program end before buffer end.");
break;
}
}
m_shader = BuildCode();
m_body.clear();
if (m_funcs.size() > 2)
{
m_funcs.erase(m_funcs.begin()+2, m_funcs.end());
}
}
std::string VertexProgramDecompiler::Decompile()
{
for (unsigned i = 0; i < PF_PARAM_COUNT; i++)
m_parr.params[i].clear();
m_instr_count = 0;
for (int i = 0; i < m_max_instr_count; ++i)
{
m_instructions[i].reset();
}
bool is_has_BRA = false;
for (u32 i = 1; m_instr_count < m_max_instr_count; m_instr_count++)
{
m_cur_instr = &m_instructions[m_instr_count];
if (is_has_BRA)
{
d3.HEX = m_data[i];
i += 4;
}
else
{
d1.HEX = m_data[i++];
switch (d1.sca_opcode)
{
case 0x08: //BRA
LOG_ERROR(RSX, "BRA found. Please report to RPCS3 team.");
is_has_BRA = true;
m_jump_lvls.clear();
d3.HEX = m_data[++i];
i += 4;
break;
case 0x09: //BRI
d2.HEX = m_data[i++];
d3.HEX = m_data[i];
i += 2;
m_jump_lvls.emplace(GetAddr());
break;
default:
d3.HEX = m_data[++i];
i += 2;
break;
}
}
if (d3.end)
{
m_instr_count++;
if (i < m_data.size())
{
LOG_ERROR(RSX, "Program end before buffer end.");
}
break;
}
}
uint jump_position = 0;
if (is_has_BRA || !m_jump_lvls.empty())
{
m_cur_instr = &m_instructions[0];
AddCode("int jump_position = 0;");
AddCode("while (true)");
AddCode("{");
m_cur_instr->open_scopes++;
AddCode(fmt::format("if (jump_position <= %u)", jump_position++));
AddCode("{");
m_cur_instr->open_scopes++;
}
for (u32 i = 0; i < m_instr_count; ++i)
{
m_cur_instr = &m_instructions[i];
d0.HEX = m_data[i * 4 + 0];
d1.HEX = m_data[i * 4 + 1];
d2.HEX = m_data[i * 4 + 2];
d3.HEX = m_data[i * 4 + 3];
src[0].src0l = d2.src0l;
src[0].src0h = d1.src0h;
src[1].src1 = d2.src1;
src[2].src2l = d3.src2l;
src[2].src2h = d2.src2h;
if (i && (is_has_BRA || std::find(m_jump_lvls.begin(), m_jump_lvls.end(), i) != m_jump_lvls.end()))
{
m_cur_instr->close_scopes++;
AddCode("}");
AddCode("");
AddCode(fmt::format("if (jump_position <= %u)", jump_position++));
AddCode("{");
m_cur_instr->open_scopes++;
}
if (!d1.sca_opcode && !d1.vec_opcode)
{
AddCode("//nop");
}
switch (d1.sca_opcode)
{
case RSX_SCA_OPCODE_NOP: break;
case RSX_SCA_OPCODE_MOV: SetDSTSca("$s"); break;
case RSX_SCA_OPCODE_RCP: SetDSTSca("(1.0 / $s)"); break;
case RSX_SCA_OPCODE_RCC: SetDSTSca("clamp(1.0 / $s, 5.42101e-20, 1.884467e19)"); break;
case RSX_SCA_OPCODE_RSQ: SetDSTSca("(1.f / sqrt($s))"); break;
case RSX_SCA_OPCODE_EXP: SetDSTSca("exp($s)"); break;
case RSX_SCA_OPCODE_LOG: SetDSTSca("log($s)"); break;
case RSX_SCA_OPCODE_LIT: SetDSTSca(getFloatTypeName(4) + "(1.0, $s.x, ($s.x > 0.0 ? exp($s.w * log2($s.y)) : 0.0), 1.0)"); break;
case RSX_SCA_OPCODE_BRA:
{
AddCode("$if ($cond)");
AddCode("{");
m_cur_instr->open_scopes++;
AddCode("jump_position = $a$am;");
AddCode("continue;");
m_cur_instr->close_scopes++;
AddCode("}");
}
break;
case RSX_SCA_OPCODE_BRI: // works differently (BRI o[1].x(TR) L0;)
{
u32 jump_position = 1;
if (is_has_BRA)
{
jump_position = GetAddr();
}
else
{
u32 addr = GetAddr();
for (auto pos : m_jump_lvls)
{
if (addr == pos)
break;
++jump_position;
}
}
AddCode("$ifcond ");
AddCode("{");
m_cur_instr->open_scopes++;
AddCode(fmt::format("jump_position = %u;", jump_position));
AddCode("continue;");
m_cur_instr->close_scopes++;
AddCode("}");
}
break;
case RSX_SCA_OPCODE_CAL:
// works same as BRI
AddCode("$ifcond $f(); //CAL");
break;
case RSX_SCA_OPCODE_CLI:
// works same as BRI
AddCode("$ifcond $f(); //CLI");
break;
case RSX_SCA_OPCODE_RET:
// works like BRI but shorter (RET o[1].x(TR);)
AddCode("$ifcond return;");
break;
case RSX_SCA_OPCODE_LG2: SetDSTSca("log2($s)"); break;
case RSX_SCA_OPCODE_EX2: SetDSTSca("exp2($s)"); break;
case RSX_SCA_OPCODE_SIN: SetDSTSca("sin($s)"); break;
case RSX_SCA_OPCODE_COS: SetDSTSca("cos($s)"); break;
case RSX_SCA_OPCODE_BRB:
// works differently (BRB o[1].x !b0, L0;)
LOG_ERROR(RSX, "Unimplemented sca_opcode BRB");
break;
case RSX_SCA_OPCODE_CLB: break;
// works same as BRB
LOG_ERROR(RSX, "Unimplemented sca_opcode CLB");
break;
case RSX_SCA_OPCODE_PSH: break;
// works differently (PSH o[1].x A0;)
LOG_ERROR(RSX, "Unimplemented sca_opcode PSH");
break;
case RSX_SCA_OPCODE_POP: break;
// works differently (POP o[1].x;)
LOG_ERROR(RSX, "Unimplemented sca_opcode POP");
break;
default:
AddCode(fmt::format("//Unknown vp sca_opcode 0x%x", u32{ d1.sca_opcode }));
LOG_ERROR(RSX, "Unknown vp sca_opcode 0x%x", u32{ d1.sca_opcode });
Emu.Pause();
break;
}
switch (d1.vec_opcode)
{
case RSX_VEC_OPCODE_NOP: break;
case RSX_VEC_OPCODE_MOV: SetDSTVec("$0"); break;
case RSX_VEC_OPCODE_MUL: SetDSTVec("($0 * $1)"); break;
case RSX_VEC_OPCODE_ADD: SetDSTVec("($0 + $2)"); break;
case RSX_VEC_OPCODE_MAD: SetDSTVec("($0 * $1 + $2)"); break;
case RSX_VEC_OPCODE_DP3: SetDSTVec(getFunction(FUNCTION::FUNCTION_DP3)); break;
case RSX_VEC_OPCODE_DPH: SetDSTVec(getFunction(FUNCTION::FUNCTION_DPH)); break;
case RSX_VEC_OPCODE_DP4: SetDSTVec(getFunction(FUNCTION::FUNCTION_DP4)); break;
case RSX_VEC_OPCODE_DST: SetDSTVec("vec4(distance($0, $1))"); break;
case RSX_VEC_OPCODE_MIN: SetDSTVec("min($0, $1)"); break;
case RSX_VEC_OPCODE_MAX: SetDSTVec("max($0, $1)"); break;
case RSX_VEC_OPCODE_SLT: SetDSTVec(getFloatTypeName(4) + "(" + compareFunction(COMPARE::FUNCTION_SLT, "$0", "$1") + ")"); break;
case RSX_VEC_OPCODE_SGE: SetDSTVec(getFloatTypeName(4) + "(" + compareFunction(COMPARE::FUNCTION_SGE, "$0", "$1") + ")"); break;
// Note: It looks like ARL opcode ignore input/output swizzle mask (SH3)
case RSX_VEC_OPCODE_ARL: AddCode("$ifcond $awm = " + getIntTypeName(4) + "($0);"); break;
case RSX_VEC_OPCODE_FRC: SetDSTVec(getFunction(FUNCTION::FUNCTION_FRACT)); break;
case RSX_VEC_OPCODE_FLR: SetDSTVec("floor($0)"); break;
case RSX_VEC_OPCODE_SEQ: SetDSTVec(getFloatTypeName(4) + "(" + compareFunction(COMPARE::FUNCTION_SEQ, "$0", "$1") + ")"); break;
case RSX_VEC_OPCODE_SFL: SetDSTVec(getFunction(FUNCTION::FUNCTION_SFL)); break;
case RSX_VEC_OPCODE_SGT: SetDSTVec(getFloatTypeName(4) + "(" + compareFunction(COMPARE::FUNCTION_SGT, "$0", "$1") + ")"); break;
case RSX_VEC_OPCODE_SLE: SetDSTVec(getFloatTypeName(4) + "(" + compareFunction(COMPARE::FUNCTION_SLE, "$0", "$1") + ")"); break;
case RSX_VEC_OPCODE_SNE: SetDSTVec(getFloatTypeName(4) + "(" + compareFunction(COMPARE::FUNCTION_SNE, "$0", "$1") + ")"); break;
case RSX_VEC_OPCODE_STR: SetDSTVec(getFunction(FUNCTION::FUNCTION_STR)); break;
case RSX_VEC_OPCODE_SSG: SetDSTVec("sign($0)"); break;
case RSX_VEC_OPCODE_TXL: SetDSTVec("texture($t, $0.xy)"); break;
default:
AddCode(fmt::format("//Unknown vp opcode 0x%x", u32{ d1.vec_opcode }));
LOG_ERROR(RSX, "Unknown vp opcode 0x%x", u32{ d1.vec_opcode });
Emu.Pause();
break;
}
}
if (is_has_BRA || !m_jump_lvls.empty())
{
m_cur_instr = &m_instructions[m_instr_count - 1];
m_cur_instr->close_scopes++;
AddCode("}");
AddCode("break;");
m_cur_instr->close_scopes++;
AddCode("}");
}
std::string result = BuildCode();
m_jump_lvls.clear();
m_body.clear();
if (m_funcs.size() > 2)
{
m_funcs.erase(m_funcs.begin() + 2, m_funcs.end());
}
return result;
}
void GLVertexDecompilerThread::Task()
{
m_parr.params.clear();
m_instr_count = 0;
for (int i = 0; i < m_max_instr_count; ++i)
{
m_instructions[i].reset();
}
bool is_has_BRA = false;
for (u32 i = 1; m_instr_count < m_max_instr_count; m_instr_count++)
{
m_cur_instr = &m_instructions[m_instr_count];
if (is_has_BRA)
{
d3.HEX = m_data[i];
i += 4;
}
else
{
d1.HEX = m_data[i++];
switch (d1.sca_opcode)
{
case 0x08: //BRA
LOG_WARNING(RSX, "BRA found. Please report to RPCS3 team.");
is_has_BRA = true;
m_jump_lvls.clear();
d3.HEX = m_data[++i];
i += 4;
break;
case 0x09: //BRI
d2.HEX = m_data[i++];
d3.HEX = m_data[i];
i += 2;
m_jump_lvls.emplace(GetAddr());
break;
default:
d3.HEX = m_data[++i];
i += 2;
break;
}
}
if (d3.end)
{
m_instr_count++;
if (i < m_data.size())
{
LOG_ERROR(RSX, "Program end before buffer end.");
}
break;
}
}
uint jump_position = 0;
if (is_has_BRA || !m_jump_lvls.empty())
{
m_cur_instr = &m_instructions[0];
AddCode("int jump_position = 0;");
AddCode("while (true)");
AddCode("{");
m_cur_instr->open_scopes++;
AddCode(fmt::Format("if (jump_position <= %u)", jump_position++));
AddCode("{");
m_cur_instr->open_scopes++;
}
for (u32 i = 0; i < m_instr_count; ++i)
{
m_cur_instr = &m_instructions[i];
d0.HEX = m_data[i * 4 + 0];
d1.HEX = m_data[i * 4 + 1];
d2.HEX = m_data[i * 4 + 2];
d3.HEX = m_data[i * 4 + 3];
src[0].src0l = d2.src0l;
src[0].src0h = d1.src0h;
src[1].src1 = d2.src1;
src[2].src2l = d3.src2l;
src[2].src2h = d2.src2h;
if (i && (is_has_BRA || std::find(m_jump_lvls.begin(), m_jump_lvls.end(), i) != m_jump_lvls.end()))
{
m_cur_instr->close_scopes++;
AddCode("}");
AddCode("");
AddCode(fmt::Format("if (jump_position <= %u)", jump_position++));
AddCode("{");
m_cur_instr->open_scopes++;
}
if (!d1.sca_opcode && !d1.vec_opcode)
{
AddCode("//nop");
}
switch (d1.sca_opcode)
{
case RSX_SCA_OPCODE_NOP: break;
case RSX_SCA_OPCODE_MOV: SetDSTSca("$s"); break;
case RSX_SCA_OPCODE_RCP: SetDSTSca("(1.0 / $s)"); break;
case RSX_SCA_OPCODE_RCC: SetDSTSca("clamp(1.0 / $s, 5.42101e-20, 1.884467e19)"); break;
case RSX_SCA_OPCODE_RSQ: SetDSTSca("inversesqrt(abs($s))"); break;
case RSX_SCA_OPCODE_EXP: SetDSTSca("exp($s)"); break;
case RSX_SCA_OPCODE_LOG: SetDSTSca("log($s)"); break;
case RSX_SCA_OPCODE_LIT: SetDSTSca("vec4(1.0, $s.x, ($s.x > 0.0 ? exp($s.w * log2($s.y)) : 0.0), 1.0)"); break;
case RSX_SCA_OPCODE_BRA:
{
AddCode("$if ($cond)");
AddCode("{");
m_cur_instr->open_scopes++;
AddCode("jump_position = $a$am;");
AddCode("continue;");
m_cur_instr->close_scopes++;
AddCode("}");
}
break;
/* This triggers opengl driver lost connection error code 7
case RSX_SCA_OPCODE_BRI: // works differently (BRI o[1].x(TR) L0;)
{
uint jump_position;
if (is_has_BRA)
{
jump_position = GetAddr();
}
else
{
int addr = GetAddr();
jump_position = 0;
for (auto pos : m_jump_lvls)
{
if (addr == pos)
break;
++jump_position;
}
}
AddCode("$ifcond ");
AddCode("{");
m_cur_instr->open_scopes++;
AddCode(fmt::Format("jump_position = %u;", jump_position));
AddCode("continue;");
m_cur_instr->close_scopes++;
AddCode("}");
}
break;
*/
case RSX_SCA_OPCODE_CAL:
// works same as BRI
AddCode("$ifcond $f(); //CAL");
break;
case RSX_SCA_OPCODE_CLI:
// works same as BRI
AddCode("$ifcond $f(); //CLI");
break;
case RSX_SCA_OPCODE_RET:
// works like BRI but shorter (RET o[1].x(TR);)
AddCode("$ifcond return;");
break;
case RSX_SCA_OPCODE_LG2: SetDSTSca("log2($s)"); break;
case RSX_SCA_OPCODE_EX2: SetDSTSca("exp2($s)"); break;
case RSX_SCA_OPCODE_SIN: SetDSTSca("sin($s)"); break;
case RSX_SCA_OPCODE_COS: SetDSTSca("cos($s)"); break;
case RSX_SCA_OPCODE_BRB:
// works differently (BRB o[1].x !b0, L0;)
LOG_ERROR(RSX, "Unimplemented sca_opcode BRB");
break;
case RSX_SCA_OPCODE_CLB: break;
// works same as BRB
LOG_ERROR(RSX, "Unimplemented sca_opcode CLB");
break;
case RSX_SCA_OPCODE_PSH: break;
// works differently (PSH o[1].x A0;)
LOG_ERROR(RSX, "Unimplemented sca_opcode PSH");
break;
case RSX_SCA_OPCODE_POP: break;
// works differently (POP o[1].x;)
LOG_ERROR(RSX, "Unimplemented sca_opcode POP");
break;
default:
AddCode(fmt::Format("//Unknown vp sca_opcode 0x%x", fmt::by_value(d1.sca_opcode)));
LOG_ERROR(RSX, "Unknown vp sca_opcode 0x%x", fmt::by_value(d1.sca_opcode));
Emu.Pause();
break;
}
switch (d1.vec_opcode)
{
case RSX_VEC_OPCODE_NOP: break;
case RSX_VEC_OPCODE_MOV: SetDSTVec("$0"); break;
case RSX_VEC_OPCODE_MUL: SetDSTVec("($0 * $1)"); break;
case RSX_VEC_OPCODE_ADD: SetDSTVec("($0 + $2)"); break;
case RSX_VEC_OPCODE_MAD: SetDSTVec("($0 * $1 + $2)"); break;
case RSX_VEC_OPCODE_DP3: SetDSTVec("vec4(dot($0.xyz, $1.xyz))"); break;
case RSX_VEC_OPCODE_DPH: SetDSTVec("vec4(dot(vec4($0.xyz, 1.0), $1))"); break;
case RSX_VEC_OPCODE_DP4: SetDSTVec("vec4(dot($0, $1))"); break;
case RSX_VEC_OPCODE_DST: SetDSTVec("vec4(distance($0, $1))"); break;
case RSX_VEC_OPCODE_MIN: SetDSTVec("min($0, $1)"); break;
case RSX_VEC_OPCODE_MAX: SetDSTVec("max($0, $1)"); break;
case RSX_VEC_OPCODE_SLT: SetDSTVec("vec4(lessThan($0, $1))"); break;
case RSX_VEC_OPCODE_SGE: SetDSTVec("vec4(greaterThanEqual($0, $1))"); break;
case RSX_VEC_OPCODE_ARL: AddCode("$ifcond $a = ivec4($0)$am;"); break;
case RSX_VEC_OPCODE_FRC: SetDSTVec("fract($0)"); break;
case RSX_VEC_OPCODE_FLR: SetDSTVec("floor($0)"); break;
case RSX_VEC_OPCODE_SEQ: SetDSTVec("vec4(equal($0, $1))"); break;
case RSX_VEC_OPCODE_SFL: SetDSTVec("vec4(equal($0, vec4(0.0)))"); break;
case RSX_VEC_OPCODE_SGT: SetDSTVec("vec4(greaterThan($0, $1))"); break;
case RSX_VEC_OPCODE_SLE: SetDSTVec("vec4(lessThanEqual($0, $1))"); break;
case RSX_VEC_OPCODE_SNE: SetDSTVec("vec4(notEqual($0, $1))"); break;
case RSX_VEC_OPCODE_STR: SetDSTVec("vec4(equal($0, vec4(1.0)))"); break;
case RSX_VEC_OPCODE_SSG: SetDSTVec("sign($0)"); break;
case RSX_VEC_OPCODE_TEX: SetDSTVec("texture($t, $0.xy)"); break;
default:
AddCode(fmt::Format("//Unknown vp opcode 0x%x", fmt::by_value(d1.vec_opcode)));
LOG_ERROR(RSX, "Unknown vp opcode 0x%x", fmt::by_value(d1.vec_opcode));
Emu.Pause();
break;
}
}
if (is_has_BRA || !m_jump_lvls.empty())
{
m_cur_instr = &m_instructions[m_instr_count - 1];
m_cur_instr->close_scopes++;
AddCode("}");
AddCode("break;");
m_cur_instr->close_scopes++;
AddCode("}");
}
m_shader = BuildCode();
m_jump_lvls.clear();
m_body.clear();
if (m_funcs.size() > 2)
{
m_funcs.erase(m_funcs.begin() + 2, m_funcs.end());
}
}
