void LIB_EDIT_FRAME::OnExportBody( wxCommandEvent& aEvent )
{
m_toolManager->DeactivateTool();
SetToolID( ID_LIBEDIT_EXPORT_BODY_BUTT, GetGalCanvas()->GetDefaultCursor(), _( "Export" ) );
SaveOneSymbol();
SetNoToolSelected();
m_canvas->SetIgnoreMouseEvents( false );
}
void WinEDA_GerberFrame::OnLeftClick(wxDC * DC, const wxPoint& MousePos)
/************************************************************************/
/* Traite les commandes declenchée par le bouton gauche de la souris,
quand un outil est deja selectionné
*/
{
EDA_BaseStruct * DrawStruct = GetScreen()->m_CurrentItem;
wxString msg;
if ( m_ID_current_state == 0 )
{
if ( DrawStruct && DrawStruct->m_Flags ) // Commande "POPUP" en cours
{
switch (DrawStruct->m_StructType )
{
default:
msg.Printf(
wxT("WinEDA_GerberFrame::ProcessCommand err: Struct %d, m_Flags = %X"),
(unsigned) DrawStruct->m_StructType,
(unsigned) DrawStruct->m_Flags);
DisplayError(this, msg );
}
}
else
{
GetScreen()->m_CurrentItem =
DrawStruct = GerberGeneralLocateAndDisplay();
}
}
switch ( m_ID_current_state )
{
case 0:
break;
case ID_NO_SELECT_BUTT:
break;
case ID_PCB_DELETE_ITEM_BUTT:
DrawStruct = GerberGeneralLocateAndDisplay();
if ( DrawStruct == NULL ) break;
if ( DrawStruct->m_StructType == TYPETRACK )
{
Delete_Segment(DC, (TRACK *) DrawStruct );
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
}
break;
default :
DisplayError(this, wxT("WinEDA_GerberFrame::ProcessCommand error"));
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
}
}
void EDA_DRAW_FRAME::SetNoToolSelected()
{
// Select the ID_NO_TOOL_SELECTED id tool (Idle tool)
int defaultCursor = wxCURSOR_DEFAULT;
// Change GAL canvas cursor if requested.
defaultCursor = GetGalCanvas()->GetDefaultCursor();
SetToolID( ID_NO_TOOL_SELECTED, defaultCursor, wxEmptyString );
}
void EDA_DRAW_FRAME::UseGalCanvas( bool aEnable )
{
KIGFX::VIEW* view = GetGalCanvas()->GetView();
KIGFX::GAL* gal = GetGalCanvas()->GetGAL();
double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
// Display the same view after canvas switching
if( aEnable )
{
BASE_SCREEN* screen = GetScreen();
// Switch to GAL rendering
if( !IsGalCanvasActive() )
{
// Set up viewport
double zoom = 1.0 / ( zoomFactor * m_canvas->GetZoom() );
view->SetScale( zoom );
view->SetCenter( VECTOR2D( m_canvas->GetScreenCenterLogicalPosition() ) );
}
// Set up grid settings
gal->SetGridVisibility( IsGridVisible() );
gal->SetGridSize( VECTOR2D( screen->GetGridSize().x, screen->GetGridSize().y ) );
gal->SetGridOrigin( VECTOR2D( GetGridOrigin() ) );
}
else
{
// Switch to standard rendering
if( IsGalCanvasActive() )
{
// Change view settings only if GAL was active previously
double zoom = 1.0 / ( zoomFactor * view->GetScale() );
m_canvas->SetZoom( zoom );
VECTOR2D center = view->GetCenter();
RedrawScreen( wxPoint( center.x, center.y ), false );
}
}
m_canvas->SetEvtHandlerEnabled( !aEnable );
GetGalCanvas()->SetEvtHandlerEnabled( aEnable );
// Switch panes
m_auimgr.GetPane( wxT( "DrawFrame" ) ).Show( !aEnable );
m_auimgr.GetPane( wxT( "DrawFrameGal" ) ).Show( aEnable );
m_auimgr.Update();
// Reset current tool on switch();
SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
m_galCanvasActive = aEnable;
}
void WinEDA_DrawFrame::ToPrinter(wxCommandEvent& event)
/*******************************************************/
/* Prepare les structures de données de gestion de l'impression
et affiche la fenetre de dialogue de gestion de l'impression des feuilles
*/
{
wxPoint pos = GetPosition();
bool PrinterError = FALSE;
// Arret des commandes en cours
if( m_CurrentScreen->ManageCurseur && m_CurrentScreen->ForceCloseManageCurseur )
{
wxClientDC dc(DrawPanel);
DrawPanel->PrepareDC(dc);
m_CurrentScreen->ForceCloseManageCurseur(this, &dc);
}
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
if ( g_PrintData == NULL ) // Premier appel a l'impression
{
g_PrintData = new wxPrintData();
if ( ! g_PrintData->Ok() )
{
PrinterError = TRUE;
DisplayError( this, _("Error Init Printer info") );
}
g_PrintData->SetQuality(wxPRINT_QUALITY_HIGH); // Default resolution = HIGHT;
g_PrintData->SetOrientation(DEFAULT_ORIENTATION_PAPER);
}
if ( g_PageSetupData == NULL ) // Premier appel a l'impression
{
g_PageSetupData = new wxPageSetupDialogData;
#ifdef EESCHEMA
#define MARGE_MINI 10 // marge mini en mm (Eeschema has no buidin margin)
#else
#define MARGE_MINI 0 // marge mini en mm (Pcbnew has a buidin margin (g_PlotMarge)
#endif
g_PageSetupData->SetMarginTopLeft(wxPoint(MARGE_MINI,MARGE_MINI));
g_PageSetupData->SetMarginBottomRight(wxPoint(MARGE_MINI,MARGE_MINI));
}
pos.x += 10; pos.y += 10;
WinEDA_PrintFrame * frame = new WinEDA_PrintFrame(this, pos);
frame->ShowModal(); frame->Destroy();
#ifdef EESCHEMA
g_PrintFillMask = 0;
#endif
}
//-----------------------------------------------------------------------------
BOOL CLayerManager::Create (CWnd *pParent, LPCTSTR lpszTitle) {
CString strWndClass ;
strWndClass =AfxRegisterWndClass (CS_DBLCLKS, LoadCursor (NULL, IDC_ARROW)) ;
CRect rect (0, 0, 200, 150) ;
if (!CAcUiDockControlBar::Create (strWndClass, lpszTitle, WS_VISIBLE | WS_CHILD | WS_CLIPCHILDREN,rect, pParent, 0))
return (FALSE) ;
SetToolID (&clsCLayerManager) ;
CLayerManager::EnableDocking(CBRS_ALIGN_LEFT | CBRS_ALIGN_RIGHT);// | CBRS_ALIGN_TOP
CLayerManager::DockControlBar(CBRS_ALIGN_LEFT,CRect(0, 0, 200, 150));
CLayerManager::RestoreControlBar();
return (TRUE) ;
}
//-----------------------------------------------------------------------------
BOOL RcuDesiginDockBarDlg::Create ( CWnd* pParent, LPCTSTR lpszTitle )
{
CString strWndClass ;
strWndClass = AfxRegisterWndClass ( CS_DBLCLKS, LoadCursor ( NULL, IDC_ARROW ) ) ;
CRect rect ( 0, 0, 350, 285 ) ;
if ( !CAcUiDockControlBar::Create (
strWndClass, lpszTitle, WS_VISIBLE | WS_CHILD | WS_CLIPCHILDREN,
rect, pParent, 0
)
)
return ( FALSE ) ;
SetToolID ( &clsGEList_DockBar ) ;
return ( TRUE ) ;
}
void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
m_canvas->CrossHairOff( DC );
if( GetToolId() == ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() ) // Move item command in progress
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
PlaceTexteModule( static_cast<TEXTE_MODULE*>( item ), DC );
break;
case PCB_MODULE_EDGE_T:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Place_EdgeMod( static_cast<EDGE_MODULE*>( item ) );
break;
case PCB_PAD_T:
PlacePad( static_cast<D_PAD*>( item ), DC );
break;
default:
{
wxString msg;
msg.Printf( wxT( "WinEDA_ModEditFrame::OnLeftClick err:Struct %d, m_Flag %X" ),
item->Type(), item->GetFlags() );
DisplayError( this, msg );
item->ClearFlags();
break;
}
}
}
else
{
if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
item = ModeditLocateAndDisplay();
SetCurItem( item );
}
}
item = GetCurItem();
bool no_item_edited = item == NULL || item->GetFlags() == 0;
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_MODEDIT_CIRCLE_TOOL:
case ID_MODEDIT_ARC_TOOL:
case ID_MODEDIT_LINE_TOOL:
if( no_item_edited )
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_MODEDIT_CIRCLE_TOOL )
shape = S_CIRCLE;
if( GetToolId() == ID_MODEDIT_ARC_TOOL )
shape = S_ARC;
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) NULL, DC, shape ) );
}
else if( item->IsNew() )
{
if( ( (EDGE_MODULE*) item )->GetShape() == S_CIRCLE )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT )
{
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) item, DC, S_SEGMENT ) );
}
else
{
wxMessageBox( wxT( "ProcessCommand error: unknown shape" ) );
}
}
break;
case ID_MODEDIT_DELETE_TOOL:
if( ! no_item_edited ) // Item in edit, cannot delete it
break;
item = ModeditLocateAndDisplay();
if( item && item->Type() != PCB_MODULE_T ) // Cannot delete the module itself
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
RemoveStruct( item );
SetCurItem( NULL );
}
break;
case ID_MODEDIT_ANCHOR_TOOL:
{
MODULE* module = GetBoard()->m_Modules;
if( module == NULL // No module loaded
|| (module->GetFlags() != 0) )
break;
SaveCopyInUndoList( module, UR_MODEDIT );
// set the new relative internal local coordinates of footprint items
wxPoint moveVector = module->GetPosition() - GetCrossHairPosition();
module->MoveAnchorPosition( moveVector );
// Usually, we do not need to change twice the anchor position,
// so deselect the active tool
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
case ID_MODEDIT_PLACE_GRID_COORD:
m_canvas->DrawGridAxis( DC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( DC, GR_COPY, GetBoard()->GetGridOrigin() );
GetScreen()->SetModify();
break;
case ID_MODEDIT_TEXT_TOOL:
if( GetBoard()->m_Modules == NULL )
break;
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
CreateTextModule( GetBoard()->m_Modules, DC );
break;
case ID_MODEDIT_PAD_TOOL:
if( GetBoard()->m_Modules )
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
AddPad( GetBoard()->m_Modules, true );
}
break;
default:
DisplayError( this, wxT( "FOOTPRINT_EDIT_FRAME::ProcessCommand error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
m_canvas->CrossHairOn( DC );
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
{
wxString library = SelectLibrary( GetCurrentLib() );
if( library.size() )
{
Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
updateTitle();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
// On Windows, Raise() does not bring the window on screen, when iconized
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
if( !Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = CreateNewModule( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
updateView();
m_canvas->Refresh();
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
break;
}
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true );
if( wizard->ShowModal( NULL, this ) )
{
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
if( module == NULL ) // i.e. if create module command aborted
break;
Clear_Pcb( false );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
GetBoard()->Add( module, ADD_APPEND );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
Zoom_Automatique( false );
updateView();
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && GetCurrentLib().size() )
{
SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
wxMessageBox( _("No board currently edited" ) );
break;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
m_toolManager->RunAction( COMMON_ACTIONS::selectionClear, true );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
if( pcbframe->IsGalCanvasActive() )
{
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
source_module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( source_module );
}
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
if( pcbframe->IsGalCanvasActive() )
{
RN_DATA* ratsnest = pcbframe->GetBoard()->GetRatsnest();
ratsnest->Update( newmodule );
ratsnest->Recalculate();
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
newmodule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( newmodule );
pcbframe->GetGalCanvas()->ForceRefresh();
}
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );
if( ! Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );
if( GetBoard() && GetBoard()->m_Modules )
{
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();
if( val && ref )
{
ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE ); // just in case ...
if( ref->GetLength() == 0 )
ref->SetText( wxT( "Ref**" ) );
val->SetType( TEXTE_MODULE::TEXT_is_VALUE ); // just in case ...
if( val->GetLength() == 0 )
val->SetText( wxT( "Val**" ) );
}
}
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
updateView();
m_canvas->Refresh();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
// Currently: not implemented
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetBoard()->m_Modules.GetFirst()->ViewUpdate();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DUPLICATE_ITEM:
duplicateItems( false );
break;
case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
duplicateItems( true );
break;
case ID_POPUP_PCB_MOVE_EXACT:
moveExact();
break;
case ID_POPUP_PCB_CREATE_ARRAY:
createArray();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
case ID_MODEDIT_MODULE_MOVE_EXACT:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
m_canvas->Refresh();
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MOVE_BLOCK_EXACT:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_GEN_IMPORT_DXF_FILE:
if( GetBoard()->m_Modules )
{
InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
m_canvas->Refresh();
}
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
}
void WinEDA_LibeditFrame::OnLeftClick(wxDC * DC, const wxPoint& MousePos)
/************************************************************************/
{
LibEDA_BaseStruct* DrawEntry = CurrentDrawItem;
if( CurrentLibEntry == NULL) return;
if ( m_ID_current_state == 0 )
{
if ( DrawEntry && DrawEntry->m_Flags )
{
switch (DrawEntry->m_StructType )
{
case COMPONENT_PIN_DRAW_TYPE:
SaveCopyInUndoList();
PlacePin(DC);
break;
case COMPONENT_FIELD_DRAW_TYPE:
SaveCopyInUndoList();
PlaceField(DC, (LibDrawField *) DrawEntry);
DrawEntry = NULL;
break;
default:
SaveCopyInUndoList();
EndDrawGraphicItem(DC);
break;
}
}
else
{
DrawEntry = LocatePin(m_CurrentScreen->m_Curseur, CurrentLibEntry,
CurrentUnit, CurrentConvert);
if (DrawEntry == NULL )
{
DrawEntry = LocateDrawItem(GetScreen(), CurrentLibEntry,CurrentUnit,
CurrentConvert,LOCATE_ALL_DRAW_ITEM);
}
if ( DrawEntry ) DrawEntry->Display_Infos_DrawEntry(this);
else
{
EraseMsgBox();
AfficheDoc(this, CurrentLibEntry->m_Doc.GetData(),
CurrentLibEntry->m_KeyWord.GetData());
}
}
}
if ( m_ID_current_state )
{
switch ( m_ID_current_state )
{
case ID_NO_SELECT_BUTT:
break;
case ID_LIBEDIT_PIN_BUTT :
if( CurrentDrawItem == NULL )
{
CreatePin(DC);
}
else
{
SaveCopyInUndoList();
PlacePin(DC);
}
break;
case ID_LIBEDIT_BODY_LINE_BUTT :
case ID_LIBEDIT_BODY_ARC_BUTT :
case ID_LIBEDIT_BODY_CIRCLE_BUTT :
case ID_LIBEDIT_BODY_RECT_BUTT :
case ID_LIBEDIT_BODY_TEXT_BUTT :
if ( CurrentDrawItem == NULL)
{
CurrentDrawItem = CreateGraphicItem(DC);
}
else
{
if ( CurrentDrawItem->m_Flags & IS_NEW )
GraphicItemBeginDraw(DC);
else
{
SaveCopyInUndoList();
EndDrawGraphicItem(DC);
}
}
break;
case ID_LIBEDIT_DELETE_ITEM_BUTT :
DrawEntry = LocatePin(m_CurrentScreen->m_Curseur, CurrentLibEntry,
CurrentUnit, CurrentConvert);
if (DrawEntry == NULL )
{
DrawEntry = LocateDrawItem(GetScreen(), CurrentLibEntry,CurrentUnit,
CurrentConvert,LOCATE_ALL_DRAW_ITEM);
}
if ( DrawEntry == NULL )
{
AfficheDoc(this, CurrentLibEntry->m_Doc.GetData(),
CurrentLibEntry->m_KeyWord.GetData());
break;
}
SaveCopyInUndoList();
if ( DrawEntry->m_StructType == COMPONENT_PIN_DRAW_TYPE )
DeletePin(DC, CurrentLibEntry, (LibDrawPin*)DrawEntry);
else
DeleteOneLibraryDrawStruct(DrawPanel, DC, CurrentLibEntry,DrawEntry, TRUE);
DrawEntry = NULL;
m_CurrentScreen->SetModify();
break;
case ID_LIBEDIT_ANCHOR_ITEM_BUTT :
SaveCopyInUndoList();
PlaceAncre();
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
default :
DisplayError(this, wxT("WinEDA_LibeditFrame::OnLeftClick error") );
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
}
}
}
void WinEDA_SchematicFrame::HandleBlockPlace(wxDC * DC)
/******************************************************/
/* Routine to handle the BLOCK PLACE commande
Last routine for block operation for:
- block move & drag
- block copie & paste
*/
{
bool err = FALSE;
if(GetScreen()->ManageCurseur == NULL)
{
err = TRUE;
DisplayError(this, wxT("HandleBlockPLace() : ManageCurseur = NULL") );
}
if(GetScreen()->BlockLocate.m_BlockDrawStruct == NULL)
{
wxString msg;
err = TRUE;
msg.Printf( wxT("HandleBlockPLace() : m_BlockDrawStruct = NULL (cmd %d, state %d)"),
GetScreen()->BlockLocate.m_Command, GetScreen()->BlockLocate.m_State);
DisplayError(this, msg );
}
GetScreen()->BlockLocate.m_State = STATE_BLOCK_STOP;
switch(GetScreen()->BlockLocate.m_Command )
{
case BLOCK_IDLE:
err = TRUE;
break;
case BLOCK_DRAG: /* Drag */
case BLOCK_MOVE: /* Move */
if ( GetScreen()->ManageCurseur )
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
MoveStruct(DrawPanel, DC, GetScreen()->BlockLocate.m_BlockDrawStruct);
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
break;
case BLOCK_COPY: /* Copy */
case BLOCK_PRESELECT_MOVE: /* Move with preselection list*/
if ( GetScreen()->ManageCurseur )
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
CopyStruct(DrawPanel, DC, GetScreen(), GetScreen()->BlockLocate.m_BlockDrawStruct);
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
break;
case BLOCK_PASTE: /* Paste (recopie du dernier bloc sauve */
if ( GetScreen()->ManageCurseur )
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
PasteStruct(DC);
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
break;
case BLOCK_ZOOM: // Handled by HandleBlockEnd()
case BLOCK_DELETE:
case BLOCK_SAVE:
case BLOCK_ROTATE:
case BLOCK_INVERT:
case BLOCK_ABORT:
case BLOCK_SELECT_ITEMS_ONLY:
break;
}
SetFlagModify(GetScreen());
/* clear struct.m_Flags */
EDA_BaseStruct * Struct;
for(Struct = GetScreen()->EEDrawList; Struct != NULL; Struct=Struct->Pnext)
Struct->m_Flags = 0;
GetScreen()->ManageCurseur = NULL;
GetScreen()->ForceCloseManageCurseur = NULL;
GetScreen()->BlockLocate.m_Flags = 0;
GetScreen()->BlockLocate.m_State = STATE_NO_BLOCK;
GetScreen()->BlockLocate.m_Command = BLOCK_IDLE;
GetScreen()->m_CurrentItem = NULL;
TestDanglingEnds(GetScreen()->EEDrawList, DC);
if ( GetScreen()->BlockLocate.m_BlockDrawStruct )
{
DisplayError(this, wxT("HandleBlockPLace() error: DrawStruct != Null") );
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
}
SetToolID(m_ID_current_state, DrawPanel->m_PanelDefaultCursor, wxEmptyString );
}
int WinEDA_SchematicFrame::HandleBlockEnd(wxDC * DC)
/****************************************************/
/* Routine de gestion de la commande BLOCK END
retourne :
0 si aucun composant selectionne
1 sinon
-1 si commande terminée et composants trouvés (block delete, block save)
*/
{
int ii = 0;
bool zoom_command = FALSE;
if ( GetScreen()->BlockLocate.m_BlockDrawStruct )
{
BlockState state = GetScreen()->BlockLocate.m_State;
CmdBlockType command = GetScreen()->BlockLocate.m_Command;
if ( GetScreen()->ForceCloseManageCurseur )
GetScreen()->ForceCloseManageCurseur(this, DC);
GetScreen()->BlockLocate.m_State = state;
GetScreen()->BlockLocate.m_Command = command;
GetScreen()->ManageCurseur = DrawAndSizingBlockOutlines;
GetScreen()->ForceCloseManageCurseur = AbortBlockCurrentCommand;
GetScreen()->m_Curseur.x = GetScreen()->BlockLocate.GetRight();
GetScreen()->m_Curseur.y = GetScreen()->BlockLocate.GetBottom();
if ( GetScreen()->BlockLocate.m_Command != BLOCK_ABORT )
DrawPanel->MouseToCursorSchema();
}
if(GetScreen()->ManageCurseur != NULL)
switch( GetScreen()->BlockLocate.m_Command )
{
case BLOCK_IDLE:
DisplayError(this, wxT("Error in HandleBlockPLace()") );
break;
case BLOCK_DRAG: /* Drag */
BreakSegmentOnJunction(GetScreen() );
case BLOCK_MOVE: /* Move */
case BLOCK_COPY: /* Copy */
GetScreen()->BlockLocate.m_BlockDrawStruct =
PickStruct(GetScreen()->BlockLocate,
GetScreen()->EEDrawList, SEARCHALL);
case BLOCK_PRESELECT_MOVE: /* Move with preselection list*/
if( GetScreen()->BlockLocate.m_BlockDrawStruct != NULL)
{
ii = 1;
CollectStructsToDrag(GetScreen());
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
GetScreen()->ManageCurseur = DrawMovingBlockOutlines;
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
GetScreen()->BlockLocate.m_State = STATE_BLOCK_MOVE;
}
else
{
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
GetScreen()->ManageCurseur = NULL;
GetScreen()->ForceCloseManageCurseur = NULL;
}
break;
case BLOCK_DELETE: /* Delete */
GetScreen()->BlockLocate.m_BlockDrawStruct =
PickStruct(GetScreen()->BlockLocate,
GetScreen()->EEDrawList, SEARCHALL);
DrawAndSizingBlockOutlines(DrawPanel, DC, FALSE);
if( GetScreen()->BlockLocate.m_BlockDrawStruct != NULL)
{
ii = -1;
DeleteStruct(DrawPanel, DC, GetScreen()->BlockLocate.m_BlockDrawStruct);
SetFlagModify(GetScreen());
}
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
TestDanglingEnds(GetScreen()->EEDrawList, DC);
break;
case BLOCK_SAVE: /* Save */
GetScreen()->BlockLocate.m_BlockDrawStruct =
PickStruct(GetScreen()->BlockLocate,
GetScreen()->EEDrawList, SEARCHALL);
DrawAndSizingBlockOutlines(DrawPanel, DC, FALSE);
if( GetScreen()->BlockLocate.m_BlockDrawStruct != NULL)
{
wxPoint oldpos = GetScreen()->m_Curseur;
GetScreen()->m_Curseur = wxPoint(0,0);
EDA_BaseStruct *DrawStructCopy =
SaveStructListForPaste(GetScreen()->BlockLocate.m_BlockDrawStruct);
PlaceStruct( GetScreen(), DrawStructCopy);
GetScreen()->m_Curseur = oldpos;
ii = -1;
}
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
break;
case BLOCK_PASTE:
GetScreen()->BlockLocate.m_State = STATE_BLOCK_MOVE;
break;
case BLOCK_ROTATE:
case BLOCK_INVERT: /* pcbnew only! */
break;
case BLOCK_ZOOM: /* Window Zoom */
zoom_command = TRUE;
break;
case BLOCK_SELECT_ITEMS_ONLY: /* Not used */
case BLOCK_ABORT: /* not executed here */
break;
}
if ( GetScreen()->BlockLocate.m_Command == BLOCK_ABORT )
{ /* clear struct.m_Flags */
EDA_BaseStruct * Struct;
for(Struct = GetScreen()->EEDrawList; Struct != NULL; Struct=Struct->Pnext)
Struct->m_Flags = 0;
}
if ( ii <= 0 )
{
GetScreen()->BlockLocate.m_Flags = 0;
GetScreen()->BlockLocate.m_State = STATE_NO_BLOCK;
GetScreen()->BlockLocate.m_Command = BLOCK_IDLE;
GetScreen()->ManageCurseur = NULL;
GetScreen()->ForceCloseManageCurseur = NULL;
GetScreen()->m_CurrentItem = NULL;
SetToolID(m_ID_current_state, DrawPanel->m_PanelDefaultCursor, wxEmptyString );
}
if ( zoom_command)
Window_Zoom( GetScreen()->BlockLocate);
return(ii);
}
void LIB_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& aPosition )
{
LIB_ITEM* item = m_drawItem;
bool item_in_edit = item && item->InEditMode();
bool no_item_edited = !item_in_edit;
LIB_PART* part = GetCurPart();
if( !part ) // No component loaded !
return;
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) && no_item_edited )
{
item = LocateItemUsingCursor( aPosition );
if( item )
{
MSG_PANEL_ITEMS items;
item->GetMsgPanelInfo( items );
SetMsgPanel( items );
}
else
{
DisplayCmpDoc();
if( m_canvas->GetAbortRequest() )
m_canvas->SetAbortRequest( false );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
// If an item is currently in edit, finish edit
if( item_in_edit )
{
switch( item->Type() )
{
case LIB_PIN_T:
PlacePin();
break;
default:
EndDrawGraphicItem( DC );
break;
}
}
break;
case ID_LIBEDIT_PIN_BUTT:
if( no_item_edited )
CreatePin( DC );
else
PlacePin();
break;
case ID_LIBEDIT_BODY_LINE_BUTT:
case ID_LIBEDIT_BODY_ARC_BUTT:
case ID_LIBEDIT_BODY_CIRCLE_BUTT:
case ID_LIBEDIT_BODY_RECT_BUTT:
case ID_LIBEDIT_BODY_TEXT_BUTT:
if( no_item_edited )
m_drawItem = CreateGraphicItem( part, DC );
else if( m_drawItem )
{
if( m_drawItem->IsNew() )
GraphicItemBeginDraw( DC );
else
EndDrawGraphicItem( DC );
}
break;
case ID_LIBEDIT_DELETE_ITEM_BUTT:
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
deleteItem( DC );
else
DisplayCmpDoc();
break;
case ID_LIBEDIT_ANCHOR_ITEM_BUTT:
SaveCopyInUndoList( part );
PlaceAnchor();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unhandled command ID %d" ), GetToolId() ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
}
/* Handle the left button mouse click, when a tool is active
*/
void PCB_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
bool exit = false;
bool no_tool = GetToolId() == ID_NO_TOOL_SELECTED;
if( no_tool || ( DrawStruct && DrawStruct->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
if( DrawStruct && DrawStruct->GetFlags() ) // Command in progress
{
m_canvas->SetIgnoreMouseEvents( true );
m_canvas->CrossHairOff( aDC );
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
if( DrawStruct->IsNew() )
{
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
}
else
{
End_Move_Zone_Corner_Or_Outlines( aDC, (ZONE_CONTAINER*) DrawStruct );
}
exit = true;
break;
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_TEXT_T:
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_TEXT_T:
PlaceTexteModule( (TEXTE_MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_PAD_T:
PlacePad( (D_PAD*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_T:
PlaceModule( (MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_TARGET_T:
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
exit = true;
break;
case PCB_LINE_T:
if( no_tool ) // when no tools: existing item moving.
{
Place_DrawItem( (DRAWSEGMENT*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_DIMENSION_T:
if( ! DrawStruct->IsNew() )
{ // We are moving the text of an existing dimension. Place it
PlaceDimensionText( (DIMENSION*) DrawStruct, aDC );
exit = true;
}
break;
default:
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() err: DrawType %d m_Flags != 0" ),
DrawStruct->Type() );
exit = true;
break;
}
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->CrossHairOn( aDC );
if( exit )
return;
}
else if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
}
}
if( DrawStruct ) // display netclass info for zones, tracks and pads
{
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
case PCB_TRACE_T:
case PCB_VIA_T:
case PCB_PAD_T:
GetDesignSettings().SetCurrentNetClass(
((BOARD_CONNECTED_ITEM*)DrawStruct)->GetNetClassName() );
updateTraceWidthSelectBox();
updateViaSizeSelectBox();
break;
default:
break;
}
}
switch( GetToolId() )
{
case ID_MAIN_MENUBAR:
case ID_NO_TOOL_SELECTED:
break;
case ID_PCB_MUWAVE_TOOL_SELF_CMD:
case ID_PCB_MUWAVE_TOOL_GAP_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD:
case ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD:
MuWaveCommand( aDC, aPosition );
break;
case ID_PCB_HIGHLIGHT_BUTT:
{
int netcode = SelectHighLight( aDC );
if( netcode < 0 )
SetMsgPanel( GetBoard() );
else
{
NETINFO_ITEM* net = GetBoard()->FindNet( netcode );
if( net )
{
MSG_PANEL_ITEMS items;
net->GetMsgPanelInfo( items );
SetMsgPanel( items );
}
}
}
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
DrawStruct = PcbGeneralLocateAndDisplay();
Show_1_Ratsnest( DrawStruct, aDC );
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
break;
case ID_PCB_MIRE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( (BOARD_ITEM*) CreateTarget( aDC ) );
m_canvas->MoveCursorToCrossHair();
}
else if( DrawStruct->Type() == PCB_TARGET_T )
{
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TARGET_T" ) );
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_LINE_BUTT:
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_PCB_CIRCLE_BUTT )
shape = S_CIRCLE;
if( GetToolId() == ID_PCB_ARC_BUTT )
shape = S_ARC;
if( IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Graphic not allowed on Copper layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( NULL, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct
&& (DrawStruct->Type() == PCB_LINE_T)
&& DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( (DRAWSEGMENT*) DrawStruct, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
}
break;
case ID_TRACK_BUTT:
if( !IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Tracks on Copper layers only " ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_Route( NULL, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && DrawStruct->IsNew() )
{
TRACK* track = Begin_Route( (TRACK*) DrawStruct, aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( DrawStruct = (BOARD_ITEM*) track, false );
m_canvas->SetAutoPanRequest( true );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
/* ZONE or KEEPOUT Tool is selected. Determine action for a left click:
* this can be start a new zone or select and move an existing zone outline corner
* if found near the mouse cursor
*/
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
if( Begin_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( true );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
}
else if( DrawStruct && (DrawStruct->Type() == PCB_ZONE_AREA_T) && DrawStruct->IsNew() )
{ // Add a new corner to the current outline being created:
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
else
{
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() zone internal error" ) );
}
break;
case ID_PCB_ADD_TEXT_BUTT:
if( IsLayerInList( EDGE_LAYER, GetActiveLayer() ) )
{
DisplayError( this,
_( "Texts not allowed on Edge Cut layer" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( CreateTextePcb( aDC ) );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct->Type() == PCB_TEXT_T )
{
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TEXT_T" ) );
}
break;
case ID_PCB_MODULE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
m_canvas->MoveCursorToCrossHair();
DrawStruct = (BOARD_ITEM*) LoadModuleFromLibrary(
wxEmptyString, Prj().PcbFootprintLibs(), true, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
StartMoveModule( (MODULE*) DrawStruct, aDC, false );
}
else if( DrawStruct->Type() == PCB_MODULE_T )
{
PlaceModule( (MODULE*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "Internal err: Struct not PCB_MODULE_T" ) );
}
break;
case ID_PCB_DIMENSION_BUTT:
if( IsLayerInList( EDGE_LAYER|ALL_CU_LAYERS, GetActiveLayer() ) )
{
DisplayError( this,
_( "Dimension not allowed on Copper or Edge Cut layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) EditDimension( NULL, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && (DrawStruct->Type() == PCB_DIMENSION_T) && DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) EditDimension( (DIMENSION*) DrawStruct, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else
{
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() error item is not a DIMENSION" ) );
}
break;
case ID_PCB_DELETE_ITEM_BUTT:
if( !DrawStruct || !DrawStruct->GetFlags() )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct && (DrawStruct->GetFlags() == 0) )
{
RemoveStruct( DrawStruct, aDC );
SetCurItem( DrawStruct = NULL );
}
}
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
m_canvas->DrawAuxiliaryAxis( aDC, GR_XOR );
SetAuxOrigin( GetCrossHairPosition() );
m_canvas->DrawAuxiliaryAxis( aDC, GR_COPY );
OnModify();
break;
case ID_PCB_PLACE_GRID_COORD_BUTT:
m_canvas->DrawGridAxis( aDC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( aDC, GR_COPY, GetBoard()->GetGridOrigin() );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() id error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
}
bool LIB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotKey, const wxPoint& aPosition, EDA_ITEM* aItem )
{
if( aHotKey == 0 )
return false;
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem
* with non ascii codes like function keys */
if( (aHotKey >= 'a') && (aHotKey <= 'z') )
aHotKey += 'A' - 'a';
EDA_HOTKEY* hotKey = GetDescriptorFromHotkey( aHotKey, common_Hotkey_List );
if( hotKey == NULL )
hotKey = GetDescriptorFromHotkey( aHotKey, libEdit_Hotkey_List );
if( hotKey == NULL )
return false;
bool itemInEdit = m_drawItem && m_drawItem->InEditMode();
bool blocInProgress = GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK;
switch( hotKey->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return false;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Libedit_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: // Reset the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_ZOOM_IN:
case HK_ZOOM_OUT:
case HK_ZOOM_REDRAW:
case HK_ZOOM_CENTER:
case HK_ZOOM_AUTO:
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_UNDO:
case HK_REDO:
if( !itemInEdit )
{
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
}
break;
case HK_REPEAT_LAST:
if( ! itemInEdit )
{
if( m_lastDrawItem && !m_lastDrawItem->InEditMode() &&
( m_lastDrawItem->Type() == LIB_PIN_T ) )
RepeatPinItem( aDC, (LIB_PIN*) m_lastDrawItem );
}
break;
case HK_EDIT:
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
{
switch( m_drawItem->Type() )
{
case LIB_PIN_T:
cmd.SetId( ID_LIBEDIT_EDIT_PIN );
GetEventHandler()->ProcessEvent( cmd );
break;
case LIB_ARC_T:
case LIB_CIRCLE_T:
case LIB_RECTANGLE_T:
case LIB_POLYLINE_T:
case LIB_TEXT_T:
cmd.SetId( ID_POPUP_LIBEDIT_BODY_EDIT_ITEM );
GetEventHandler()->ProcessEvent( cmd );
break;
case LIB_FIELD_T:
cmd.SetId( ID_POPUP_LIBEDIT_FIELD_EDIT_ITEM );
GetEventHandler()->ProcessEvent( cmd );
break;
default:
break;
}
}
break;
case HK_ROTATE:
if( blocInProgress )
{
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockPlace( aDC );
}
else
{
if ( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
{
cmd.SetId( ID_LIBEDIT_ROTATE_ITEM );
GetEventHandler()->ProcessEvent( cmd );
}
}
break;
case HK_LIBEDIT_LOAD_PART:
LoadOneLibraryPart( cmd );
break;
case HK_LIBEDIT_CREATE_PIN:
if( ! itemInEdit )
{
SetToolID( ID_LIBEDIT_PIN_BUTT, wxCURSOR_PENCIL, _( "Add Pin" ) );
OnLeftClick( aDC, aPosition );
}
break;
case HK_DELETE:
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem && !m_drawItem->InEditMode() )
{
cmd.SetId( ID_POPUP_LIBEDIT_DELETE_ITEM );
Process_Special_Functions( cmd );
}
break;
case HK_LIBEDIT_MOVE_GRAPHIC_ITEM:
if( !itemInEdit )
{
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
{
cmd.SetId( ID_POPUP_LIBEDIT_MOVE_ITEM_REQUEST );
Process_Special_Functions( cmd );
}
}
break;
case HK_DRAG:
if( !itemInEdit )
{
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem && !m_drawItem->InEditMode() )
{
cmd.SetId( ID_POPUP_LIBEDIT_MODIFY_ITEM );
Process_Special_Functions( cmd );
}
}
break;
case HK_MIRROR_Y: // Mirror Y
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
cmd.SetId( ID_LIBEDIT_MIRROR_Y );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_MIRROR_X: // Mirror X
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
cmd.SetId( ID_LIBEDIT_MIRROR_X );
GetEventHandler()->ProcessEvent( cmd );
break;
}
// Hot key handled.
return true;
}
/* Handles the selection of tools, menu, and popup menu commands.
*/
void GERBVIEW_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
m_canvas->EndMouseCapture();
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
/* Should not be executed, except bug */
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
m_canvas->SetCursor( (wxStockCursor) m_canvas->GetCurrentCursor() );
break;
default:
m_canvas->EndMouseCapture();
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( id )
{
case ID_GERBVIEW_SET_PAGE_BORDER:
{
DIALOG_PAGE_SHOW_PAGE_BORDERS dlg( this );
if( dlg.ShowModal() == wxID_OK )
m_canvas->Refresh();
}
break;
case ID_GERBVIEW_GLOBAL_DELETE:
Erase_Current_DrawLayer( true );
ClearMsgPanel();
break;
case ID_NO_TOOL_SELECTED:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_GERBVIEW_SHOW_LIST_DCODES:
Liste_D_Codes();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
wxFAIL_MSG( wxT( "GERBVIEW_FRAME::Process_Special_Functions error" ) );
break;
}
}
void WinEDA_PcbFrame::Process_Special_Functions(wxCommandEvent& event)
/*********************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
wxPoint pos;
wxClientDC dc(DrawPanel);
int itmp;
DrawPanel->PrepareGraphicContext(&dc);
wxGetMousePosition(&pos.x, &pos.y);
pos.y += 20;
switch ( id ) // Arret eventuel de la commande de déplacement en cours
{
case wxID_CUT:
case wxID_COPY:
case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
case ID_ON_GRID_SELECT:
case ID_ON_ZOOM_SELECT:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_VIA:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
case ID_POPUP_PCB_EDIT_ZONE:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_NET_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_SELECT_WIDTH:
case ID_POPUP_PCB_SELECT_WIDTH1:
case ID_POPUP_PCB_SELECT_WIDTH2:
case ID_POPUP_PCB_SELECT_WIDTH3:
case ID_POPUP_PCB_SELECT_WIDTH4:
case ID_POPUP_PCB_SELECT_WIDTH5:
case ID_POPUP_PCB_SELECT_WIDTH6:
case ID_POPUP_PCB_SELECT_WIDTH7:
case ID_POPUP_PCB_SELECT_WIDTH8:
case ID_POPUP_PCB_SELECT_VIASIZE:
case ID_POPUP_PCB_SELECT_VIASIZE1:
case ID_POPUP_PCB_SELECT_VIASIZE2:
case ID_POPUP_PCB_SELECT_VIASIZE3:
case ID_POPUP_PCB_SELECT_VIASIZE4:
case ID_POPUP_PCB_SELECT_VIASIZE5:
case ID_POPUP_PCB_SELECT_VIASIZE6:
case ID_POPUP_PCB_SELECT_VIASIZE7:
case ID_POPUP_PCB_SELECT_VIASIZE8:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_INVERT_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_VIA_EDITING:
case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
case ID_POPUP_PCB_VIA_HOLE_EXPORT:
case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
/* ne devrait pas etre execute, sauf bug */
if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
{
m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
}
if (m_ID_current_state == 0 )
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
break;
default: // Arret de la commande de déplacement en cours
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
break;
}
switch ( id ) // Traitement des commandes
{
case ID_EXIT :
Close(TRUE);
break;
case ID_OPEN_MODULE_EDITOR:
if (m_Parent->m_ModuleEditFrame == NULL )
{
m_Parent->m_ModuleEditFrame = new WinEDA_ModuleEditFrame(this,
m_Parent,_("Module Editor"),
wxPoint(-1, -1), wxSize(600,400) );
m_Parent->m_ModuleEditFrame->Show(TRUE);
m_Parent->m_ModuleEditFrame->Zoom_Automatique(TRUE);
}
else m_Parent->m_ModuleEditFrame->Iconize(FALSE);
break;
case ID_NEW_PROJECT:
case ID_LOAD_PROJECT:
Files_io(event);
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame(pos);
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ROTATE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_INVERT_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_INVERT;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_UNDO_BUTT:
UnDeleteItem(&dc);
break;
case ID_DRC_CONTROL:
Install_Test_DRC_Frame(&dc);
break;
case ID_GET_NETLIST:
InstallNetlistFrame(&dc, wxPoint(-1,-1));
break;
case ID_GET_TOOLS:
// InstallToolsFrame(this, wxPoint(-1,-1) );
break;
case ID_FIND_ITEMS:
InstallFindFrame(pos, &dc);
break;
case ID_TRACK_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Tracks"));
DisplayTrackSettings();
if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
{
Compile_Ratsnest( &dc, TRUE );
}
break;
case ID_PCB_ZONES_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Zones"));
if ( ! DisplayOpt.DisplayZones )
DisplayInfo(this, _("Warning: Display Zone is OFF!!!") );
DelLimitesZone(&dc, TRUE);
if( ! g_HightLigt_Status && (g_HightLigth_NetCode > 0 ) )
Hight_Light(&dc);
break;
case ID_PCB_MIRE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Mire"));
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Adjust Zero"));
break;
case ID_LINE_COMMENT_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Graphic"));
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Text"));
break;
case ID_COMPONENT_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Add Modules"));
break;
case ID_PCB_COTATION_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Cotation"));
break;
case ID_NO_SELECT_BUTT:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_PCB_HIGHLIGHT_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Net Highlight"));
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Local Ratsnest"));
if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
Compile_Ratsnest( &dc, TRUE );
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_END_LINE:
DrawPanel->MouseToCursorSchema();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if ( CURRENT_ITEM == NULL) break;
Edit_Track_Width(&dc, (TRACK *) CURRENT_ITEM);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if ( CURRENT_ITEM == NULL) break;
Edit_TrackSegm_Width(&dc, (TRACK *) CURRENT_ITEM);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_NET:
if ( CURRENT_ITEM == NULL) break;
Edit_Net_Width(&dc, ((TRACK *) CURRENT_ITEM)->m_NetCode);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
case ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE:
case ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE:
if ( CURRENT_ITEM == NULL) break;
{
bool resize_vias = TRUE, resize_track = TRUE;
if( id == ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE) resize_track = FALSE;
if( id == ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE) resize_vias = FALSE;
if ( Resize_Pistes_Vias(&dc, resize_track, resize_vias)) GetScreen()->SetModify();
}
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_END_TRACK:
DrawPanel->MouseToCursorSchema();
End_Route( (TRACK *) CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
}
break;
case ID_POPUP_PCB_PLACE_VIA:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
}
else
{
Other_Layer_Route( (TRACK *) CURRENT_ITEM, &dc);
if ( DisplayOpt.ContrastModeDisplay )
GetScreen()->SetRefreshReq();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
DrawPanel->MouseToCursorSchema();
GetScreen()->m_CurrentItem = Delete_Segment(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
DrawPanel->MouseToCursorSchema();
Delete_Track(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
DrawPanel->MouseToCursorSchema();
Delete_net(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, FALSE);
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track((TRACK*)CURRENT_ITEM, &dc, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track((TRACK*)CURRENT_ITEM, &dc, FALSE);
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, FALSE);
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM == NULL) break;
Delete_Zone(&dc, (SEGZONE*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_EDIT_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM == NULL) break;
Edit_Zone_Width(&dc, (SEGZONE*)CURRENT_ITEM);
break;
case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
DrawPanel->MouseToCursorSchema();
DelLimitesZone(&dc, TRUE);
break;
case ID_PCB_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_BULLSEYE, _("Delete item"));
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
Process_Move_Item(this, CURRENT_ITEM, &dc);
DrawPanel->m_AutoPAN_Request = TRUE;
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
g_Drag_Pistes_On = TRUE;
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
{
g_Drag_Pistes_On = FALSE;
break;
}
DrawPanel->MouseToCursorSchema();
StartMove_Module( (MODULE*)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_DELETE_MODULE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
if ( Delete_Module((MODULE*) CURRENT_ITEM, &dc) )
{
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, -900, TRUE);
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, 900, TRUE);
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Change_Side_Module((MODULE *) CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EDIT_MODULE:
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
InstallModuleOptionsFrame((MODULE *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
g_Drag_Pistes_On = TRUE;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
DrawPanel->MouseToCursorSchema();
StartMovePad((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame((D_PAD *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Global_Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Export_Pad_Settings((D_PAD *)CURRENT_ITEM);
break;
case ID_POPUP_PCB_DELETE_PAD:
DeletePad((D_PAD *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame((TEXTE_MODULE *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
DrawPanel->MouseToCursorSchema();
StartMoveTexteModule( (TEXTE_MODULE *) CURRENT_ITEM,
&dc);
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule((TEXTE_MODULE *)CURRENT_ITEM,
&dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule((TEXTE_MODULE *)CURRENT_ITEM,
&dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, -1);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, CMP_N+1, -1);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, CMP_N);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectLayerPair();
DrawPanel->MouseToCursorSchema();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
itmp = m_SelLayerBox->GetChoice();
GetScreen()->m_Active_Layer = (int)((size_t) m_SelLayerBox->GetClientData(itmp));
if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame((TEXTE_PCB *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
StartMove_Mire((MIREPCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_MIRE:
InstallMireOptionsFrame((MIREPCB *)CURRENT_ITEM, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_MIRE:
DrawPanel->MouseToCursorSchema();
Delete_Mire((MIREPCB *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_DELETE_COTATION:
DrawPanel->MouseToCursorSchema();
Delete_Cotation((COTATION*)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_EDIT_COTATION:
Install_Edit_Cotation((COTATION*)CURRENT_ITEM, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge((DRAWSEGMENT *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
Delete_Drawings_All_Layer((DRAWSEGMENT *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
Drawing_SetNewWidth((DRAWSEGMENT *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
DrawPanel->MouseToCursorSchema();
Start_Move_DrawItem((DRAWSEGMENT *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
End_Edge( (DRAWSEGMENT *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
End_Zone(&dc);
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_DELETE_EDGE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = Del_SegmEdgeZone(&dc,
(EDGE_ZONE *) CURRENT_ITEM);
}
break;
case ID_POPUP_PCB_FILL_ZONE:
DrawPanel->MouseToCursorSchema();
Fill_Zone(&dc);
break;
case ID_POPUP_PCB_SELECT_NET_ZONE:
DrawPanel->MouseToCursorSchema();
CaptureNetName(&dc);
break;
case ID_POPUP_PCB_SELECT_WIDTH:
break;
case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
{
int ii = m_SelTrackWidthBox->GetChoice();
g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
DisplayTrackSettings();
m_SelTrackWidthBox_Changed = FALSE;
m_SelViaSizeBox_Changed = FALSE;
}
break;
case ID_POPUP_PCB_SELECT_WIDTH1:
case ID_POPUP_PCB_SELECT_WIDTH2:
case ID_POPUP_PCB_SELECT_WIDTH3:
case ID_POPUP_PCB_SELECT_WIDTH4:
case ID_POPUP_PCB_SELECT_WIDTH5:
case ID_POPUP_PCB_SELECT_WIDTH6:
case ID_POPUP_PCB_SELECT_WIDTH7:
case ID_POPUP_PCB_SELECT_WIDTH8:
DrawPanel->MouseToCursorSchema();
{
int ii = id - ID_POPUP_PCB_SELECT_WIDTH1;
g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
DisplayTrackSettings();
}
break;
case ID_POPUP_PCB_SELECT_VIASIZE:
break;
case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
{
int ii = m_SelViaSizeBox->GetChoice();
g_DesignSettings.m_CurrentViaSize = g_DesignSettings.m_ViaSizeHistory[ii];
DisplayTrackSettings();
m_SelTrackWidthBox_Changed = FALSE;
m_SelViaSizeBox_Changed = FALSE;
}
break;
case ID_POPUP_PCB_SELECT_VIASIZE1:
case ID_POPUP_PCB_SELECT_VIASIZE2:
case ID_POPUP_PCB_SELECT_VIASIZE3:
case ID_POPUP_PCB_SELECT_VIASIZE4:
case ID_POPUP_PCB_SELECT_VIASIZE5:
case ID_POPUP_PCB_SELECT_VIASIZE6:
case ID_POPUP_PCB_SELECT_VIASIZE7:
case ID_POPUP_PCB_SELECT_VIASIZE8:
case ID_POPUP_PCB_VIA_EDITING:
case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
case ID_POPUP_PCB_VIA_HOLE_EXPORT:
case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
Via_Edit_Control(&dc, id, (SEGVIA *) GetScreen()->m_CurrentItem);
break;
case ID_POPUP_PCB_MOVE_TRACK_NODE:
DrawPanel->MouseToCursorSchema();
Start_MoveOneTrackSegment((TRACK *) GetScreen()->m_CurrentItem,
&dc, TRUE);
break;
case ID_POPUP_PCB_BREAK_TRACK:
DrawPanel->MouseToCursorSchema();
{
TRACK * track = (TRACK *) GetScreen()->m_CurrentItem;
wxPoint pos = GetScreen()->m_Curseur;
track->Draw(DrawPanel, &dc, GR_XOR);
TRACK * newtrack = CreateLockPoint(&pos.x, &pos.y, track, NULL);
track->Draw(DrawPanel, &dc, GR_XOR);
newtrack->Draw(DrawPanel, &dc, GR_XOR);
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb(&dc);
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers(event);
break;
case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER:
GlobalRoute(&dc);
break;
case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER_DATA:
ReadAutoroutedTracks(&dc);
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame(pos);
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxString msg = FindKicadHelpPath();
msg += EDA_Appl->m_EDA_CommonConfig->Read(wxT("module_doc_file"),
wxT("pcbnew/footprints.pdf"));
GetAssociatedDocument(this, wxEmptyString, msg);
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
Archive_Modules(wxEmptyString, TRUE);
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
Archive_Modules(wxEmptyString, FALSE);
break;
default:
{
DisplayError(this, wxT("WinEDA_PcbFrame::Process_Special_Functions() id error"));
break;
}
}
SetToolbars();
}
void WinEDA_PcbFrame::OnLeftClick(wxDC * DC, const wxPoint& MousePos)
/********************************************************************/
/* Traite les commandes declenchée par le bouton gauche de la souris,
quand un outil est deja selectionné
*/
{
EDA_BaseStruct * DrawStruct = CURRENT_ITEM;
if ( (m_ID_current_state == 0) || ( DrawStruct && DrawStruct->m_Flags ))
{
DrawPanel->m_AutoPAN_Request = FALSE;
if ( DrawStruct && DrawStruct->m_Flags ) // Commande "POPUP" en cours
{
switch (DrawStruct->m_StructType )
{
case TYPETRACK:
case TYPEVIA:
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *)DrawStruct, DC);
return;
}
break;
case TYPETEXTE:
Place_Texte_Pcb((TEXTE_PCB *)DrawStruct, DC);
return;
break;
case TYPETEXTEMODULE:
PlaceTexteModule( (TEXTE_MODULE *) DrawStruct, DC);
return;
break;
case TYPEPAD:
PlacePad((D_PAD *)DrawStruct, DC);
return;
break;
case TYPEMODULE:
Place_Module((MODULE *)DrawStruct, DC);
return;
break;
case TYPEMIRE:
Place_Mire((MIREPCB *)DrawStruct, DC);
return;
break;
case TYPEDRAWSEGMENT:
if (m_ID_current_state == 0)
{
Place_DrawItem( (DRAWSEGMENT * )DrawStruct, DC);
return;
}
break;
default:
if (m_ID_current_state == 0)
{
DisplayError(this,
wxT("WinEDA_PcbFrame::OnLeftClick() err: m_Flags != 0") );
return;
}
}
}
else
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
}
switch ( m_ID_current_state )
{
case ID_MAIN_MENUBAR:
case 0:
break;
case ID_NO_SELECT_BUTT:
break;
case ID_PCB_MUWAVE_TOOL_SELF_CMD:
case ID_PCB_MUWAVE_TOOL_GAP_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD:
case ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD:
MuWaveCommand(DC, MousePos);
break;
case ID_PCB_HIGHLIGHT_BUTT:
{
int netcode = Select_High_Light(DC);
if ( netcode < 0 ) Affiche_Infos_Status_Pcb(this);
else Affiche_Infos_Equipot(netcode, this);
}
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
DrawStruct = PcbGeneralLocateAndDisplay();
Show_1_Ratsnest(DrawStruct, DC);
break;
case ID_PCB_MIRE_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = Create_Mire( DC );
DrawPanel->MouseToCursorSchema();
}
else if (DrawStruct->m_StructType == TYPEMIRE )
{
Place_Mire((MIREPCB *)DrawStruct, DC);
}
else DisplayError(this, wxT("Internal err: Struct not TYPEMIRE"));
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_LINE_COMMENT_BUTT:
{
int shape = S_SEGMENT;
if ( m_ID_current_state == ID_PCB_CIRCLE_BUTT) shape = S_CIRCLE;
if ( m_ID_current_state == ID_PCB_ARC_BUTT) shape = S_ARC;
if ( GetScreen()->m_Active_Layer <= CMP_N )
{
DisplayError(this, _("Graphic not autorized on Copper layers"));
break;
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_DrawSegment(NULL, shape, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct &&
(DrawStruct->m_StructType == TYPEDRAWSEGMENT) &&
(DrawStruct->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_DrawSegment((DRAWSEGMENT *)DrawStruct, shape, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
break;
}
case ID_TRACK_BUTT:
if ( GetScreen()->m_Active_Layer > CMP_N )
{
DisplayError(this, _("Tracks on Copper layers only "));
break;
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Route(NULL, DC);
if ( DrawStruct ) DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct &&
// (DrawStruct->m_StructType == TYPETRACK) &&
(DrawStruct->m_Flags & IS_NEW) )
{
TRACK * track = Begin_Route((TRACK *) DrawStruct, DC);
if ( track ) // c'est a dire si OK
GetScreen()->m_CurrentItem = DrawStruct = track;
DrawPanel->m_AutoPAN_Request = TRUE;
}
break;
case ID_PCB_ZONES_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Zone();
}
else if (DrawStruct &&
(DrawStruct->m_StructType == TYPEEDGEZONE) &&
(DrawStruct->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Zone();
}
else DisplayError(this, wxT("Edit: zone internal error"));
break;
case ID_TEXT_COMMENT_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = Create_Texte_Pcb( DC );
DrawPanel->MouseToCursorSchema();
DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct->m_StructType == TYPETEXTE )
{
Place_Texte_Pcb((TEXTE_PCB *)DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
else DisplayError(this, wxT("Internal err: Struct not TYPETEXTE"));
break;
case ID_COMPONENT_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
DrawPanel->MouseToCursorSchema();
GetScreen()->m_CurrentItem = DrawStruct =
Load_Module_From_Library(wxEmptyString, DC);
if ( DrawStruct )
StartMove_Module((MODULE *)DrawStruct, DC);
}
else if (DrawStruct->m_StructType == TYPEMODULE )
{
Place_Module((MODULE *)DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
else DisplayError(this, wxT("Internal err: Struct not TYPEMODULE"));
break;
case ID_PCB_COTATION_BUTT:
if ( GetScreen()->m_Active_Layer <= CMP_N )
{
DisplayError(this, _("Cotation not autorized on Copper layers"));
break;
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Cotation(NULL, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct &&
(DrawStruct->m_StructType == TYPECOTATION) &&
(DrawStruct->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Cotation((COTATION * )DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else DisplayError(this, wxT("Internal err: Struct not COTATION"));
break;
case ID_PCB_DELETE_ITEM_BUTT:
if ( !DrawStruct || (DrawStruct->m_Flags == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if ( DrawStruct && (DrawStruct->m_Flags == 0) )
{
RemoveStruct(DrawStruct, DC);
GetScreen()->m_CurrentItem = DrawStruct = NULL;
}
}
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
GetScreen()->Trace_Curseur(DrawPanel, DC);
DrawPanel->m_Draw_Auxiliary_Axe(DC, GR_XOR);
m_Auxiliary_Axe_Position = GetScreen()->m_Curseur;
DrawPanel->m_Draw_Auxiliary_Axe( DC, GR_COPY);
GetScreen()->Trace_Curseur(DrawPanel, DC);
break;
default :
DrawPanel->SetCursor(wxCURSOR_ARROW);
DisplayError(this, wxT("WinEDA_PcbFrame::OnLeftClick() id error"));
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
break;
}
}
void SCH_EDIT_FRAME::OnSelectTool( wxCommandEvent& aEvent )
{
int id = aEvent.GetId();
// Stop the current command and deselect the current tool.
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
switch( id )
{
case ID_NO_TOOL_SELECTED:
SetToolID( id, m_canvas->GetDefaultCursor(), _( "No tool selected" ) );
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
SetToolID( id, wxCURSOR_HAND, _( "Descend or ascend hierarchy" ) );
break;
case ID_NOCONN_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add no connect" ) );
break;
case ID_WIRE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add wire" ) );
break;
case ID_BUS_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add bus" ) );
break;
case ID_LINE_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add lines" ) );
break;
case ID_JUNCTION_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add junction" ) );
break;
case ID_LABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add label" ) );
break;
case ID_GLABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add global label" ) );
break;
case ID_HIERLABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add hierarchical label" ) );
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add text" ) );
break;
case ID_ADD_IMAGE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add image" ) );
break;
case ID_WIRETOBUS_ENTRY_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add wire to bus entry" ) );
break;
case ID_BUSTOBUS_ENTRY_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add bus to bus entry" ) );
break;
case ID_SHEET_SYMBOL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add sheet" ) );
break;
case ID_SHEET_PIN_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add sheet pins" ) );
break;
case ID_IMPORT_HLABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Import sheet pins" ) );
break;
case ID_SCH_PLACE_COMPONENT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add component" ) );
break;
case ID_PLACE_POWER_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add power" ) );
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_BULLSEYE, _( "Delete item" ) );
break;
default:
SetRepeatItem( NULL );
}
// Simulate left click event if we got here from a hot key.
if( aEvent.GetClientObject() != NULL )
{
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxPoint pos = data->GetPosition();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
OnLeftClick( &dc, pos );
}
}
void LIB_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& aPosition )
{
LIB_ITEM* item = m_drawItem;
if( m_component == NULL ) // No component loaded !
return;
if( item == NULL || item->GetFlags() == 0 )
{
item = LocateItemUsingCursor( aPosition );
if( item )
{
item->DisplayInfo( this );
}
else
{
DisplayCmpDoc();
if( m_canvas->GetAbortRequest() )
m_canvas->SetAbortRequest( false );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( item && item->GetFlags() ) // moved object
{
switch( item->Type() )
{
case LIB_PIN_T:
PlacePin( DC );
break;
default:
EndDrawGraphicItem( DC );
break;
}
}
break;
case ID_LIBEDIT_PIN_BUTT:
if( m_drawItem == NULL || m_drawItem->GetFlags() == 0 )
{
CreatePin( DC );
}
else
{
PlacePin( DC );
}
break;
case ID_LIBEDIT_BODY_LINE_BUTT:
case ID_LIBEDIT_BODY_ARC_BUTT:
case ID_LIBEDIT_BODY_CIRCLE_BUTT:
case ID_LIBEDIT_BODY_RECT_BUTT:
case ID_LIBEDIT_BODY_TEXT_BUTT:
if( m_drawItem == NULL || m_drawItem->GetFlags() == 0 )
{
m_drawItem = CreateGraphicItem( m_component, DC );
}
else if( m_drawItem )
{
if( m_drawItem->IsNew() )
GraphicItemBeginDraw( DC );
else
EndDrawGraphicItem( DC );
}
break;
case ID_LIBEDIT_DELETE_ITEM_BUTT:
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
deleteItem( DC );
else
DisplayCmpDoc();
break;
case ID_LIBEDIT_ANCHOR_ITEM_BUTT:
SaveCopyInUndoList( m_component );
PlaceAnchor();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unhandled command ID %d" ), GetToolId() ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
}
void SCH_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
pos = wxGetMousePosition();
pos.y += 20;
// If needed, stop the current command and deselect current tool
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_CANCEL_CURRENT_COMMAND:
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
case ID_POPUP_SCH_BEGIN_WIRE:
case ID_POPUP_SCH_BEGIN_BUS:
case ID_POPUP_END_LINE:
case ID_POPUP_SCH_SET_SHAPE_TEXT:
case ID_POPUP_SCH_CLEANUP_SHEET:
case ID_POPUP_SCH_END_SHEET:
case ID_POPUP_SCH_RESIZE_SHEET:
case ID_POPUP_IMPORT_GLABEL:
case ID_POPUP_SCH_INIT_CMP:
case ID_POPUP_SCH_DISPLAYDOC_CMP:
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_DRAG_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
case ID_POPUP_SCH_ENTER_SHEET:
case ID_POPUP_SCH_LEAVE_SHEET:
case ID_POPUP_SCH_ADD_JUNCTION:
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_GETINFO_MARKER:
/* At this point: Do nothing. these commands do not need to stop the
* current command (mainly a block command) or reset the current state
* They will be executed later, in next switch structure.
*/
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
// Stop the current command (if any) but keep the current tool
m_canvas->EndMouseCapture();
break;
default:
// Stop the current command and deselect the current tool
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
item = screen->GetCurItem(); // Can be modified by previous calls.
switch( id )
{
case ID_HIERARCHY:
InstallHierarchyFrame( &dc, pos );
SetRepeatItem( NULL );
break;
case wxID_CUT:
if( screen->m_BlockLocate.GetCommand() != BLOCK_MOVE )
break;
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetRepeatItem( NULL );
SetSheetNumberAndCount();
break;
case wxID_PASTE:
HandleBlockBegin( &dc, BLOCK_PASTE, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '/' );
break;
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '\\' );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
}
else
{
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_POPUP_END_LINE:
m_canvas->MoveCursorToCrossHair();
EndSegment( &dc );
break;
case ID_POPUP_SCH_BEGIN_WIRE:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_BEGIN_BUS:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_SET_SHAPE_TEXT:
// Not used
break;
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
m_canvas->MoveCursorToCrossHair();
DeleteConnection( id == ID_POPUP_SCH_DELETE_CONNECTION );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
m_canvas->Refresh();
break;
case ID_POPUP_SCH_BREAK_WIRE:
{
DLIST< SCH_ITEM > oldWires;
oldWires.SetOwnership( false ); // Prevent DLIST for deleting items in destructor.
m_canvas->MoveCursorToCrossHair();
screen->ExtractWires( oldWires, true );
screen->BreakSegment( GetCrossHairPosition() );
if( oldWires.GetCount() != 0 )
{
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
}
screen->TestDanglingEnds( m_canvas, &dc );
}
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
if( item == NULL )
break;
DeleteItem( item );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
SetSheetNumberAndCount();
OnModify();
break;
case ID_POPUP_SCH_END_SHEET:
m_canvas->MoveCursorToCrossHair();
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_RESIZE_SHEET:
ReSizeSheet( (SCH_SHEET*) item, &dc );
screen->TestDanglingEnds( m_canvas, &dc );
break;
case ID_POPUP_IMPORT_GLABEL:
if( item != NULL && item->Type() == SCH_SHEET_T )
screen->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, &dc ) );
break;
case ID_POPUP_SCH_CLEANUP_SHEET:
if( item != NULL && item->Type() == SCH_SHEET_T )
{
SCH_SHEET* sheet = (SCH_SHEET*) item;
if( !sheet->HasUndefinedPins() )
{
DisplayInfoMessage( this,
_( "There are no undefined labels in this sheet to clean up." ) );
return;
}
if( !IsOK( this, _( "Do you wish to cleanup this sheet?" ) ) )
return;
/* Save sheet in undo list before cleaning up unreferenced hierarchical labels. */
SaveCopyInUndoList( sheet, UR_CHANGED );
sheet->CleanupSheet();
OnModify();
m_canvas->RefreshDrawingRect( sheet->GetBoundingBox() );
}
break;
case ID_POPUP_SCH_INIT_CMP:
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
// Ensure the struct is a component (could be a struct of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
m_canvas->MoveCursorToCrossHair();
ConvertPart( (SCH_COMPONENT*) item, &dc );
}
break;
case ID_POPUP_SCH_DISPLAYDOC_CMP:
// Ensure the struct is a component (could be a piece of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
LIB_ALIAS* LibEntry;
LibEntry = CMP_LIBRARY::FindLibraryEntry( ( (SCH_COMPONENT*) item )->GetLibName() );
if( LibEntry && LibEntry->GetDocFileName() != wxEmptyString )
{
GetAssociatedDocument( this, LibEntry->GetDocFileName(),
&wxGetApp().GetLibraryPathList() );
}
}
break;
case ID_POPUP_SCH_ENTER_SHEET:
if( item && (item->Type() == SCH_SHEET_T) )
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
break;
case ID_POPUP_SCH_LEAVE_SHEET:
m_CurrentSheet->Pop();
DisplayCurrentSheet();
break;
case wxID_COPY: // really this is a Save block for paste
screen->m_BlockLocate.SetCommand( BLOCK_SAVE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_PLACE_BLOCK:
m_canvas->SetAutoPanRequest( false );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
screen->m_BlockLocate.SetCommand( BLOCK_ZOOM );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetSheetNumberAndCount();
break;
case ID_POPUP_COPY_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_COPY );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DRAG_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DRAG );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_SCH_ADD_JUNCTION:
m_canvas->MoveCursorToCrossHair();
screen->SetCurItem( AddJunction( &dc, GetCrossHairPosition(), true ) );
screen->TestDanglingEnds( m_canvas, &dc );
screen->SetCurItem( NULL );
break;
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_ADD_GLABEL:
screen->SetCurItem( CreateNewText( &dc, id == ID_POPUP_SCH_ADD_LABEL ?
LAYER_LOCLABEL : LAYER_GLOBLABEL ) );
item = screen->GetCurItem();
if( item )
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_GETINFO_MARKER:
if( item && item->Type() == SCH_MARKER_T )
( (SCH_MARKER*) item )->DisplayMarkerInfo( this );
break;
default: // Log error:
wxFAIL_MSG( wxString::Format( wxT( "Cannot process command event ID %d" ),
event.GetId() ) );
break;
}
// End switch ( id ) (Command execution)
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void FOOTPRINT_EDIT_FRAME::OnVerticalToolbar( wxCommandEvent& aEvent )
{
int id = aEvent.GetId();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
switch( id )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_MODEDIT_LINE_TOOL:
SetToolID( id, wxCURSOR_PENCIL, _( "Add line" ) );
break;
case ID_MODEDIT_ARC_TOOL:
SetToolID( id, wxCURSOR_PENCIL, _( "Add arc" ) );
break;
case ID_MODEDIT_CIRCLE_TOOL:
SetToolID( id, wxCURSOR_PENCIL, _( "Add circle" ) );
break;
case ID_MODEDIT_TEXT_TOOL:
SetToolID( id, wxCURSOR_PENCIL, _( "Add text" ) );
break;
case ID_MODEDIT_ANCHOR_TOOL:
SetToolID( id, wxCURSOR_PENCIL, _( "Place anchor" ) );
break;
case ID_MODEDIT_PLACE_GRID_COORD:
SetToolID( id, wxCURSOR_PENCIL, _( "Set grid origin" ) );
break;
case ID_MODEDIT_PAD_TOOL:
if( GetBoard()->m_Modules )
{
SetToolID( id, wxCURSOR_PENCIL, _( "Add pad" ) );
}
else
{
SetToolID( id, wxCURSOR_ARROW, _( "Pad settings" ) );
InstallPadOptionsFrame( NULL );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_MODEDIT_DELETE_TOOL:
SetToolID( id, wxCURSOR_BULLSEYE, _( "Delete item" ) );
break;
default:
wxFAIL_MSG( wxT( "Unknown command id." ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
}
void WinEDA_ModuleEditFrame::OnLeftClick(wxDC * DC, const wxPoint& MousePos)
/*************************************************************************/
/* Traite les commandes declenchée par le bouton gauche de la souris,
quand un outil est deja selectionné
*/
{
EDA_BaseStruct * DrawStruct = m_CurrentScreen->m_CurrentItem;
GetScreen()->CursorOff(DrawPanel, DC);
if ( m_ID_current_state == 0 )
{
if ( DrawStruct && DrawStruct->m_Flags ) // Commande "POPUP" en cours
{
switch (DrawStruct->m_StructType )
{
case TYPETEXTEMODULE:
SaveCopyInUndoList();
PlaceTexteModule( (TEXTE_MODULE *) DrawStruct, DC);
break;
case TYPEEDGEMODULE:
SaveCopyInUndoList();
Place_EdgeMod( (EDGE_MODULE *) DrawStruct, DC);
break;
case TYPEPAD:
PlacePad((D_PAD *)DrawStruct, DC);
break;
default:
{
wxString msg;
msg.Printf(
wxT("WinEDA_ModEditFrame::ProcessCommand err: m_Flags != 0\nStruct @%p, type %d m_Flag %X")
, DrawStruct, DrawStruct->m_StructType, DrawStruct->m_Flags);
DisplayError(this, msg);
DrawStruct->m_Flags = 0;
break;
}
}
}
}
DrawStruct = m_CurrentScreen->m_CurrentItem;
if ( ! DrawStruct || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem = DrawStruct = ModeditLocateAndDisplay();
}
switch ( m_ID_current_state )
{
case 0:
break;
case ID_NO_SELECT_BUTT:
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_LINE_COMMENT_BUTT:
if ( ! DrawStruct || DrawStruct->m_Flags == 0)
{
int shape = S_SEGMENT;
if ( m_ID_current_state == ID_PCB_CIRCLE_BUTT) shape = S_CIRCLE;
if ( m_ID_current_state == ID_PCB_ARC_BUTT) shape = S_ARC;
m_CurrentScreen->m_CurrentItem =
Begin_Edge_Module((EDGE_MODULE *) NULL, DC, shape);
}
else if ( (DrawStruct->m_Flags & IS_NEW) )
{
if ( ((EDGE_MODULE*)DrawStruct)->m_Shape == S_CIRCLE )
{
End_Edge_Module((EDGE_MODULE *) DrawStruct, DC);
m_CurrentScreen->m_CurrentItem = NULL;
}
else if ( ((EDGE_MODULE*)DrawStruct)->m_Shape == S_ARC )
{
End_Edge_Module((EDGE_MODULE *) DrawStruct, DC);
m_CurrentScreen->m_CurrentItem = NULL;
}
else if ( ((EDGE_MODULE*)DrawStruct)->m_Shape == S_SEGMENT )
{
m_CurrentScreen->m_CurrentItem =
Begin_Edge_Module((EDGE_MODULE *) DrawStruct, DC, 0);
}
else DisplayError(this, wxT("ProcessCommand error: DrawStruct/ flags error"));
}
break;
case ID_MODEDIT_DELETE_ITEM_BUTT:
if ( !DrawStruct || (DrawStruct->m_Flags == 0) )
{
DrawStruct = ModeditLocateAndDisplay();
if ( DrawStruct && (DrawStruct->m_Flags == 0) )
{
SaveCopyInUndoList();
RemoveStruct(DrawStruct, DC);
m_CurrentScreen->m_CurrentItem = DrawStruct = NULL;
}
}
break;
case ID_MODEDIT_PLACE_ANCHOR:
SaveCopyInUndoList();
Place_Ancre(m_Pcb->m_Modules, DC);
m_Pcb->m_Modules->m_Flags = 0;
m_CurrentScreen->m_Curseur = wxPoint(0,0);
Recadre_Trace(TRUE);
Place_Module(m_Pcb->m_Modules, DC);
RedrawActiveWindow(DC, TRUE);
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
m_CurrentScreen->m_CurrentItem = NULL;
break;
case ID_TEXT_COMMENT_BUTT:
SaveCopyInUndoList();
CreateTextModule(m_Pcb->m_Modules, DC);
break;
case ID_MODEDIT_ADD_PAD:
if ( m_Pcb->m_Modules )
{
SaveCopyInUndoList();
AddPad(m_Pcb->m_Modules, DC);
}
break;
default :
DrawPanel->SetCursor(wxCURSOR_ARROW);
DisplayError(this, wxT("WinEDA_ModuleEditFrame::ProcessCommand error"));
m_ID_current_state = 0;
break;
}
GetScreen()->CursorOn(DrawPanel, DC);
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
void WinEDA_SchematicFrame::HandleBlockEndByPopUp(int Command, wxDC * DC)
/***********************************************************************/
/* Routine de gestion de la commande BLOCK END by PopUp
Appelee apres HandleBlockEnd.
A partir de la commande bloc move, peut executer une commande autre que bloc move.
*/
{
int ii = 0;
if( GetScreen()->BlockLocate.m_Command != BLOCK_MOVE ) return;
if( Command == BLOCK_MOVE ) return;
GetScreen()->BlockLocate.m_Command = (CmdBlockType) Command;
GetScreen()->BlockLocate.SetMessageBlock(this);
switch( GetScreen()->BlockLocate.m_Command )
{
case BLOCK_COPY: /* move to copy */
GetScreen()->BlockLocate.m_State = STATE_BLOCK_MOVE;
ii = 1;
break;
case BLOCK_DRAG: /* move to Drag */
/* Effacement de la liste des structures de pointage,
qui est devenue erronnee */
if(GetScreen()->ManageCurseur)
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
if( GetScreen()->BlockLocate.m_BlockDrawStruct )
{
if(GetScreen()->BlockLocate.m_BlockDrawStruct->m_StructType == DRAW_PICK_ITEM_STRUCT_TYPE)
{ /* Delete the picked wrapper if this is a picked list. */
DrawPickedStruct * PickedList;
PickedList = (DrawPickedStruct*)GetScreen()->BlockLocate.m_BlockDrawStruct;
PickedList->DeleteWrapperList();
}
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
}
BreakSegmentOnJunction(GetScreen() );
GetScreen()->BlockLocate.m_BlockDrawStruct =
PickStruct(GetScreen()->BlockLocate,
GetScreen()->EEDrawList, SEARCHALL);
if( GetScreen()->BlockLocate.m_BlockDrawStruct != NULL)
{
ii = 1;
CollectStructsToDrag(GetScreen());
if(GetScreen()->ManageCurseur)
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
GetScreen()->BlockLocate.m_State = STATE_BLOCK_MOVE;
}
break;
case BLOCK_DELETE: /* move to Delete */
if(GetScreen()->ManageCurseur)
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
if( GetScreen()->BlockLocate.m_BlockDrawStruct != NULL)
{
ii = -1;
DeleteStruct(DrawPanel, DC, GetScreen()->BlockLocate.m_BlockDrawStruct);
SetFlagModify(GetScreen());
}
TestDanglingEnds(GetScreen()->EEDrawList, DC);
break;
case BLOCK_SAVE: /* Save */
if(GetScreen()->ManageCurseur)
GetScreen()->ManageCurseur(DrawPanel, DC, FALSE);
if( GetScreen()->BlockLocate.m_BlockDrawStruct != NULL)
{
wxPoint oldpos = GetScreen()->m_Curseur;
GetScreen()->m_Curseur = wxPoint(0,0);
EDA_BaseStruct *DrawStructCopy =
SaveStructListForPaste(GetScreen()->BlockLocate.m_BlockDrawStruct);
PlaceStruct( GetScreen(), DrawStructCopy);
GetScreen()->m_Curseur = oldpos;
ii = -1;
}
break;
case BLOCK_ZOOM: /* Window Zoom */
GetScreen()->ForceCloseManageCurseur(this, DC);
DrawPanel->SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
Window_Zoom( GetScreen()->BlockLocate);
break;
default:
break;
}
if ( ii <= 0 )
{
GetScreen()->BlockLocate.m_BlockDrawStruct = NULL;
GetScreen()->BlockLocate.m_Flags = 0;
GetScreen()->BlockLocate.m_State = STATE_NO_BLOCK;
GetScreen()->BlockLocate.m_Command = BLOCK_IDLE;
GetScreen()->ManageCurseur = NULL;
GetScreen()->ForceCloseManageCurseur = NULL;
GetScreen()->m_CurrentItem = NULL;
SetToolID(m_ID_current_state, DrawPanel->m_PanelDefaultCursor, wxEmptyString );
}
}
void WinEDA_SchematicFrame::OnLeftClick(wxDC * DC, const wxPoint& MousePos)
/**********************************************************************************/
/* Traite les commandes declenchée par le bouton gauche de la souris,
quand un outil est deja selectionné
*/
{
EDA_BaseStruct * DrawStruct = m_CurrentScreen->m_CurrentItem;
if ( (m_ID_current_state == 0) || ( DrawStruct && DrawStruct->m_Flags ) )
{
DrawPanel->m_AutoPAN_Request = FALSE;
g_ItemToRepeat = NULL;
if ( DrawStruct && DrawStruct->m_Flags ) // Commande "POPUP" en cours
{
switch (DrawStruct->m_StructType )
{
case DRAW_SHEETLABEL_STRUCT_TYPE:
case DRAW_SHEET_STRUCT_TYPE:
case DRAW_BUSENTRY_STRUCT_TYPE:
case DRAW_LABEL_STRUCT_TYPE:
case DRAW_GLOBAL_LABEL_STRUCT_TYPE:
case DRAW_TEXT_STRUCT_TYPE:
case DRAW_JUNCTION_STRUCT_TYPE:
case DRAW_LIB_ITEM_STRUCT_TYPE:
case DRAW_PART_TEXT_STRUCT_TYPE:
DrawStruct->Place( this, DC);
m_CurrentScreen->m_CurrentItem = NULL;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
return;
case SCREEN_STRUCT_TYPE:
case DRAW_PICK_ITEM_STRUCT_TYPE:
DisplayError(this,
"OnLeftClick err: unexpected type for Place");
DrawStruct->m_Flags = 0;
break;
case DRAW_SEGMENT_STRUCT_TYPE: // Segment peut-etre en cours de trace
break;
default:
DisplayError(this,
"WinEDA_SchematicFrame::OnLeftClick err: m_Flags != 0");
DrawStruct->m_Flags = 0;
break;
}
}
else
{
DrawStruct = SchematicGeneralLocateAndDisplay();
}
}
switch ( m_ID_current_state )
{
case 0:
break;
case ID_NO_SELECT_BUTT:
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
if ( DrawStruct && DrawStruct->m_Flags ) break;
DrawStruct = SchematicGeneralLocateAndDisplay();
if ( DrawStruct && (DrawStruct->m_StructType == DRAW_SHEET_STRUCT_TYPE) )
{
InstallNextScreen((DrawSheetStruct *) DrawStruct);
}
else InstallPreviousScreen();
break;
case ID_NOCONN_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem =
g_ItemToRepeat = CreateNewNoConnectStruct(DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place(this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
break;
case ID_JUNCTION_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem = g_ItemToRepeat
= CreateNewJunctionStruct(DC, m_CurrentScreen->m_Curseur);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place(this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
break;
case ID_WIRETOBUS_ENTRY_BUTT:
case ID_BUSTOBUS_ENTRY_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem =
DrawStruct =
CreateBusEntry(DC,
(m_ID_current_state == ID_WIRETOBUS_ENTRY_BUTT) ?
WIRE_TO_BUS : BUS_TO_BUS);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place(this, DC);
m_CurrentScreen->m_CurrentItem = NULL;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
LocateAndDeleteItem(this, DC);
m_CurrentScreen->SetModify();
m_CurrentScreen->m_CurrentItem = NULL;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
break;
case ID_WIRE_BUTT:
BeginSegment(DC, LAYER_WIRE);
DrawPanel->m_AutoPAN_Request = TRUE;
break;
case ID_BUS_BUTT:
BeginSegment(DC, LAYER_BUS);
DrawPanel->m_AutoPAN_Request = TRUE;
break;
case ID_LINE_COMMENT_BUTT:
BeginSegment(DC, LAYER_NOTES);
DrawPanel->m_AutoPAN_Request = TRUE;
break;
case ID_TEXT_COMMENT_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem =
CreateNewText(DC, LAYER_NOTES);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place(this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
break;
case ID_LABEL_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem =
CreateNewText(DC, LAYER_LOCLABEL);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place( this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
}
break;
case ID_GLABEL_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem =
CreateNewText(DC, LAYER_GLOBLABEL);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place(this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
}
break;
case ID_SHEET_SYMBOL_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem = CreateSheet(DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place( this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
}
break;
case ID_IMPORT_GLABEL_BUTT:
case ID_SHEET_LABEL_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
DrawStruct = SchematicGeneralLocateAndDisplay();
if ( DrawStruct == NULL) break;
if( (DrawStruct->m_StructType == DRAW_SHEET_STRUCT_TYPE) &&
(DrawStruct->m_Flags == 0) )
{
if ( m_ID_current_state == ID_IMPORT_GLABEL_BUTT )
m_CurrentScreen->m_CurrentItem =
Import_PinSheet( (DrawSheetStruct *) DrawStruct, DC);
else
m_CurrentScreen->m_CurrentItem =
Create_PinSheet( (DrawSheetStruct *) DrawStruct, DC);
}
else if( (DrawStruct->m_StructType == DRAW_SHEETLABEL_STRUCT_TYPE) &&
(DrawStruct->m_Flags != 0) )
{
DrawStruct->Place(this, DC);
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
}
break;
case ID_COMPONENT_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem = Load_Component(DC, "",
s_CmpNameList, TRUE);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place( this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
}
break;
case ID_PLACE_POWER_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
m_CurrentScreen->m_CurrentItem =
Load_Component(DC, "power",s_PowerNameList, FALSE);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else
{
DrawStruct->Place( this, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
}
break;
default :
{
SetToolID( 0, wxCURSOR_ARROW, "");
wxString msg("WinEDA_SchematicFrame::OnLeftClick error state ");
msg << m_ID_current_state;
DisplayError(this, msg);
break;
}
}
}
void LIB_EDIT_FRAME::OnSelectTool( wxCommandEvent& aEvent )
{
int id = aEvent.GetId();
if( GetToolId() == ID_NO_TOOL_SELECTED )
m_lastDrawItem = NULL;
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(),
wxEmptyString );
LIB_PART* part = GetCurPart();
switch( id )
{
case ID_NO_TOOL_SELECTED:
SetToolID( id, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_ZOOM_SELECTION:
SetToolID( id, wxCURSOR_MAGNIFIER, _( "Zoom to selection" ) );
break;
case ID_LIBEDIT_PIN_BUTT:
if( part )
{
SetToolID( id, wxCURSOR_PENCIL, _( "Add pin" ) );
}
else
{
SetToolID( id, wxCURSOR_ARROW, _( "Set pin options" ) );
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetId( ID_LIBEDIT_EDIT_PIN );
GetEventHandler()->ProcessEvent( cmd );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_LIBEDIT_BODY_TEXT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add text" ) );
break;
case ID_LIBEDIT_BODY_RECT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add rectangle" ) );
break;
case ID_LIBEDIT_BODY_CIRCLE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add circle" ) );
break;
case ID_LIBEDIT_BODY_ARC_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add arc" ) );
break;
case ID_LIBEDIT_BODY_LINE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add line" ) );
break;
case ID_LIBEDIT_ANCHOR_ITEM_BUTT:
SetToolID( id, wxCURSOR_HAND, _( "Set anchor position" ) );
break;
case ID_LIBEDIT_IMPORT_BODY_BUTT:
SetToolID( id, m_canvas->GetDefaultCursor(), _( "Import" ) );
LoadOneSymbol();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_LIBEDIT_EXPORT_BODY_BUTT:
SetToolID( id, m_canvas->GetDefaultCursor(), _( "Export" ) );
SaveOneSymbol();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_LIBEDIT_DELETE_ITEM_BUTT:
if( !part )
{
wxBell();
break;
}
SetToolID( id, wxCURSOR_BULLSEYE, _( "Delete item" ) );
break;
default:
break;
}
m_canvas->SetIgnoreMouseEvents( false );
}
void SCH_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
wxPoint gridPosition = GetGridPosition( aPosition );
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) || ( item && item->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
SetRepeatItem( NULL );
if( item && item->GetFlags() )
{
switch( item->Type() )
{
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_SHEET_PIN_T:
case SCH_SHEET_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_FIELD_T:
case SCH_BITMAP_T:
case SCH_NO_CONNECT_T:
addCurrentItemToList( aDC );
return;
case SCH_LINE_T: // May already be drawing segment.
break;
default:
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick error. Item type <" ) +
item->GetClass() + wxT( "> is already being edited." ) );
item->ClearFlags();
break;
}
}
else
{
item = LocateAndShowItem( aPosition );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
if( ( item && item->GetFlags() ) || ( g_RootSheet->CountSheets() == 0 ) )
break;
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsOnly );
if( item ) // The user has clicked on a sheet: this is an enter sheet command
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
else if( m_CurrentSheet->Last() != g_RootSheet )
{ // The user has clicked ouside a sheet:this is an leave sheet command
m_CurrentSheet->Pop();
DisplayCurrentSheet();
}
break;
case ID_NOCONN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( false == GetScreen()->GetItem( gridPosition, 0, SCH_NO_CONNECT_T ) )
{
SCH_NO_CONNECT* no_connect = AddNoConnect( aDC, gridPosition );
SetRepeatItem( no_connect );
GetScreen()->SetCurItem( no_connect );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_JUNCTION_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( false == GetScreen()->GetItem( gridPosition, 0, SCH_JUNCTION_T ) )
{
SCH_JUNCTION* junction = AddJunction( aDC, gridPosition, true );
SetRepeatItem( junction );
GetScreen()->SetCurItem( junction );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_WIRETOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusWireEntry( aDC );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_BUSTOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusBusEntry( aDC );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
DeleteItemAtCrossHair( aDC );
break;
case ID_WIRE_BUTT:
BeginSegment( aDC, LAYER_WIRE );
m_canvas->SetAutoPanRequest( true );
break;
case ID_BUS_BUTT:
BeginSegment( aDC, LAYER_BUS );
m_canvas->SetAutoPanRequest( true );
break;
case ID_LINE_COMMENT_BUTT:
BeginSegment( aDC, LAYER_NOTES );
m_canvas->SetAutoPanRequest( true );
break;
case ID_TEXT_COMMENT_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_NOTES ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_ADD_IMAGE_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewImage( aDC ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_LABEL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_LOCLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_GLABEL_BUTT:
case ID_HIERLABEL_BUTT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
if( GetToolId() == ID_GLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_GLOBLABEL ) );
if( GetToolId() == ID_HIERLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_HIERLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_SHEET_SYMBOL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = CreateSheet( aDC );
if( item != NULL )
{
GetScreen()->SetCurItem( item );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_IMPORT_HLABEL_BUTT:
case ID_SHEET_PIN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsAndSheetLabels );
if( item == NULL )
break;
if( (item->Type() == SCH_SHEET_T) && (item->GetFlags() == 0) )
{
if( GetToolId() == ID_IMPORT_HLABEL_BUTT )
GetScreen()->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, aDC ) );
else
GetScreen()->SetCurItem( CreateSheetPin( (SCH_SHEET*) item, aDC ) );
}
else if( (item->Type() == SCH_SHEET_PIN_T) && (item->GetFlags() != 0) )
{
addCurrentItemToList( aDC );
}
break;
case ID_SCH_PLACE_COMPONENT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
GetScreen()->SetCurItem( Load_Component( aDC, wxEmptyString,
s_CmpNameList, s_CmpLastUnit, true ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_PLACE_POWER_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( Load_Component( aDC, wxT( "power" ),
s_PowerNameList, s_LastPowerUnit, false ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
default:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick invalid tool ID <" ) +
wxString::Format( wxT( "%d> selected." ), GetToolId() ) );
}
}
void WinEDA_GerberFrame::Process_Special_Functions(wxCommandEvent& event)
/********************************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
int layer = GetScreen()->m_Active_Layer;
GERBER_Descr * gerber_layer = g_GERBER_Descr_List[layer];
wxPoint pos;
wxClientDC dc(DrawPanel);
DrawPanel->PrepareGraphicContext(&dc);
wxGetMousePosition(&pos.x, &pos.y);
pos.y += 20;
switch ( id ) // Arret eventuel de la commande de déplacement en cours
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_INVERT_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
/* ne devrait pas etre execute, sauf bug */
if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
{
m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
}
if (m_ID_current_state == 0 )
SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
break;
default: // Arret dea commande de déplacement en cours
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
break;
}
switch ( id ) // Traitement des commandes
{
case ID_EXIT :
Close(TRUE);
break;
case ID_NEW_PROJECT:
case ID_LOAD_PROJECT:
Files_io(event);
break;
case ID_PCB_GLOBAL_DELETE:
Erase_Current_Layer(&dc, TRUE);
break;
case wxID_CUT:
break;
case wxID_COPY:
break;
case wxID_PASTE:
// HandleBlockBegin(&dc, BLOCK_PASTE);
break;
case ID_UNDO_BUTT:
UnDeleteItem(&dc);
break;
case ID_GET_TOOLS:
// InstallToolsFrame(this, wxPoint(-1,-1) );
break;
case ID_FIND_ITEMS:
// InstallFindFrame(this, pos);
break;
case ID_BUS_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Tracks"));
break;
case ID_LINE_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Drawing"));
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Text"));
break;
case ID_NO_SELECT_BUTT:
SetToolID( 0, 0, wxEmptyString);
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_END_LINE:
DrawPanel->MouseToCursorSchema();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
DrawPanel->MouseToCursorSchema();
if ( GetScreen()->m_CurrentItem == NULL) break;
Delete_Segment(&dc, (TRACK*)GetScreen()->m_CurrentItem);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_PCB_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Delete item"));
break;
case ID_POPUP_SCH_MOVE_ITEM_REQUEST:
DrawPanel->MouseToCursorSchema();
Process_Move_Item(this, GetScreen()->m_CurrentItem, &dc);
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
{
GetScreen()->m_Active_Layer = m_SelLayerBox->GetSelection();
DrawPanel->Refresh(TRUE);
break;
}
case ID_TOOLBARH_GERBER_SELECT_TOOL:
if ( gerber_layer )
{
int tool = m_SelLayerTool->GetSelection();
if ( tool > 0 ) tool = tool - 1 + FIRST_DCODE;
else tool = 0;
gerber_layer->m_Selected_Tool = tool;
DrawPanel->Refresh(TRUE);
}
else DisplayError(this, _("No layer selected") );
break;
case ID_GERBVIEW_SHOW_LIST_DCODES:
Liste_D_Codes(&dc);
break;
case ID_GERBVIEW_SHOW_SOURCE:
if ( gerber_layer )
{
wxString editorname = GetEditorName();
if ( ! editorname.IsEmpty() )
ExecuteFile(this, editorname, gerber_layer->m_FileName);
}
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockEnd(&dc);
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
default:
wxMessageBox( wxT("WinEDA_GerberFrame::Process_Special_Functions error"));
break;
}
SetToolbars();
}
void SCH_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
wxPoint gridPosition = GetGridPosition( aPosition );
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) || ( item && item->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
SetRepeatItem( NULL );
if( item && item->GetFlags() )
{
switch( item->Type() )
{
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_SHEET_PIN_T:
case SCH_SHEET_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_FIELD_T:
case SCH_BITMAP_T:
case SCH_NO_CONNECT_T:
addCurrentItemToList();
return;
case SCH_LINE_T: // May already be drawing segment.
break;
default:
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick error. Item type <" ) +
item->GetClass() + wxT( "> is already being edited." ) );
item->ClearFlags();
break;
}
}
else
{
item = LocateAndShowItem( aPosition );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_HIGHLIGHT:
HighlightConnectionAtPosition( aPosition );
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
if( ( item && item->GetFlags() ) || ( g_RootSheet->CountSheets() == 0 ) )
break;
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsOnly );
if( item ) // The user has clicked on a sheet: this is an enter sheet command
{
m_CurrentSheet->push_back( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
else if( m_CurrentSheet->Last() != g_RootSheet )
{ // The user has clicked ouside a sheet:this is an leave sheet command
m_CurrentSheet->pop_back();
DisplayCurrentSheet();
}
break;
case ID_NOCONN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( GetScreen()->GetItem( gridPosition, 0, SCH_NO_CONNECT_T ) == NULL )
{
SCH_NO_CONNECT* no_connect = AddNoConnect( aDC, gridPosition );
SetRepeatItem( no_connect );
GetScreen()->SetCurItem( no_connect );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_JUNCTION_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( GetScreen()->GetItem( gridPosition, 0, SCH_JUNCTION_T ) == NULL )
{
SCH_JUNCTION* junction = AddJunction( aDC, gridPosition, true );
SetRepeatItem( junction );
GetScreen()->SetCurItem( junction );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_WIRETOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusWireEntry();
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_BUSTOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusBusEntry();
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
DeleteItemAtCrossHair( aDC );
break;
case ID_WIRE_BUTT:
BeginSegment( aDC, LAYER_WIRE );
m_canvas->SetAutoPanRequest( true );
break;
case ID_BUS_BUTT:
BeginSegment( aDC, LAYER_BUS );
m_canvas->SetAutoPanRequest( true );
break;
case ID_LINE_COMMENT_BUTT:
BeginSegment( aDC, LAYER_NOTES );
m_canvas->SetAutoPanRequest( true );
break;
case ID_TEXT_COMMENT_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_NOTES ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_ADD_IMAGE_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewImage( aDC ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_LABEL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_LOCLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_GLABEL_BUTT:
case ID_HIERLABEL_BUTT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
if( GetToolId() == ID_GLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_GLOBLABEL ) );
if( GetToolId() == ID_HIERLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_HIERLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_SHEET_SYMBOL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = CreateSheet( aDC );
if( item != NULL )
{
GetScreen()->SetCurItem( item );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_IMPORT_HLABEL_BUTT:
case ID_SHEET_PIN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsAndSheetLabels );
if( item == NULL )
break;
if( (item->Type() == SCH_SHEET_T) && (item->GetFlags() == 0) )
{
if( GetToolId() == ID_IMPORT_HLABEL_BUTT )
GetScreen()->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, aDC ) );
else
GetScreen()->SetCurItem( CreateSheetPin( (SCH_SHEET*) item, aDC ) );
}
else if( (item->Type() == SCH_SHEET_PIN_T) && (item->GetFlags() != 0) )
{
addCurrentItemToList();
}
break;
case ID_SCH_PLACE_COMPONENT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
GetScreen()->SetCurItem( Load_Component( aDC, NULL,
s_CmpNameList, s_CmpLastUnit, true ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_PLACE_POWER_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
SCHLIB_FILTER filter;
filter.FilterPowerParts( true );
GetScreen()->SetCurItem( Load_Component( aDC, &filter,
s_PowerNameList, s_LastPowerUnit, false ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
#ifdef KICAD_SPICE
case ID_SIM_PROBE:
{
const KICAD_T wiresAndComponents[] = { SCH_LINE_T, SCH_COMPONENT_T, SCH_SHEET_PIN_T };
item = LocateAndShowItem( aPosition, wiresAndComponents );
if( !item )
break;
NETLIST_OBJECT_LIST* netlist = BuildNetListBase();
for( NETLIST_OBJECT* obj : *netlist )
{
if( obj->m_Comp == item )
{
SIM_PLOT_FRAME* simFrame = (SIM_PLOT_FRAME*) Kiway().Player( FRAME_SIMULATOR, false );
if( simFrame )
simFrame->AddVoltagePlot( obj->GetNetName() );
break;
}
}
}
break;
case ID_SIM_TUNE:
{
const KICAD_T fieldsAndComponents[] = { SCH_COMPONENT_T, SCH_FIELD_T };
item = LocateAndShowItem( aPosition, fieldsAndComponents );
if( !item )
return;
if( item->Type() != SCH_COMPONENT_T )
{
item = static_cast<SCH_ITEM*>( item->GetParent() );
if( item->Type() != SCH_COMPONENT_T )
return;
}
SIM_PLOT_FRAME* simFrame = (SIM_PLOT_FRAME*) Kiway().Player( FRAME_SIMULATOR, false );
if( simFrame )
simFrame->AddTuner( static_cast<SCH_COMPONENT*>( item ) );
}
break;
#endif /* KICAD_SPICE */
default:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick invalid tool ID <" ) +
wxString::Format( wxT( "%d> selected." ), GetToolId() ) );
}
}