int LEVMAR_BC_DER(
void (*func)(LM_REAL *p, LM_REAL *hx, int m, int n, void *adata), /* functional relation describing measurements. A p \in R^m yields a \hat{x} \in R^n */
void (*jacf)(LM_REAL *p, LM_REAL *j, int m, int n, void *adata), /* function to evaluate the jacobian \part x / \part p */
LM_REAL *p, /* I/O: initial parameter estimates. On output has the estimated solution */
LM_REAL *x, /* I: measurement vector */
int m, /* I: parameter vector dimension (i.e. #unknowns) */
int n, /* I: measurement vector dimension */
LM_REAL *lb, /* I: vector of lower bounds. If NULL, no lower bounds apply */
LM_REAL *ub, /* I: vector of upper bounds. If NULL, no upper bounds apply */
int itmax, /* I: maximum number of iterations */
LM_REAL opts[4], /* I: minim. options [\mu, \epsilon1, \epsilon2, \epsilon3]. Respectively the scale factor for initial \mu,
* stopping thresholds for ||J^T e||_inf, ||Dp||_2 and ||e||_2. Set to NULL for defaults to be used.
* Note that ||J^T e||_inf is computed on free (not equal to lb[i] or ub[i]) variables only.
*/
LM_REAL info[LM_INFO_SZ],
/* O: information regarding the minimization. Set to NULL if don't care
* info[0]= ||e||_2 at initial p.
* info[1-4]=[ ||e||_2, ||J^T e||_inf, ||Dp||_2, mu/max[J^T J]_ii ], all computed at estimated p.
* info[5]= # iterations,
* info[6]=reason for terminating: 1 - stopped by small gradient J^T e
* 2 - stopped by small Dp
* 3 - stopped by itmax
* 4 - singular matrix. Restart from current p with increased mu
* 5 - no further error reduction is possible. Restart with increased mu
* 6 - stopped by small ||e||_2
* info[7]= # function evaluations
* info[8]= # jacobian evaluations
*/
LM_REAL *work, /* working memory, allocate if NULL */
LM_REAL *covar, /* O: Covariance matrix corresponding to LS solution; mxm. Set to NULL if not needed. */
void *adata) /* pointer to possibly additional data, passed uninterpreted to func & jacf.
* Set to NULL if not needed
*/
{
register int i, j, k, l;
int worksz, freework=0, issolved;
/* temp work arrays */
LM_REAL *e, /* nx1 */
*hx, /* \hat{x}_i, nx1 */
*jacTe, /* J^T e_i mx1 */
*jac, /* nxm */
*jacTjac, /* mxm */
*Dp, /* mx1 */
*diag_jacTjac, /* diagonal of J^T J, mx1 */
*pDp; /* p + Dp, mx1 */
register LM_REAL mu, /* damping constant */
tmp; /* mainly used in matrix & vector multiplications */
LM_REAL p_eL2, jacTe_inf, pDp_eL2; /* ||e(p)||_2, ||J^T e||_inf, ||e(p+Dp)||_2 */
LM_REAL p_L2, Dp_L2=LM_REAL_MAX, dF, dL;
LM_REAL tau, eps1, eps2, eps2_sq, eps3;
LM_REAL init_p_eL2;
int nu=2, nu2, stop, nfev, njev=0;
const int nm=n*m;
/* variables for constrained LM */
struct FUNC_STATE fstate;
LM_REAL alpha=CNST(1e-4), beta=CNST(0.9), gamma=CNST(0.99995), gamma_sq=gamma*gamma, rho=CNST(1e-8);
LM_REAL t, t0;
LM_REAL steptl=CNST(1e3)*(LM_REAL)sqrt(LM_REAL_EPSILON), jacTeDp;
LM_REAL tmin=CNST(1e-12), tming=CNST(1e-18); /* minimum step length for LS and PG steps */
const LM_REAL tini=CNST(1.0); /* initial step length for LS and PG steps */
int nLMsteps=0, nLSsteps=0, nPGsteps=0, gprevtaken=0;
int numactive;
mu=jacTe_inf=t=0.0; tmin=tmin; /* -Wall */
if(n<m){
fprintf(stderr, LCAT(LEVMAR_BC_DER, "(): cannot solve a problem with fewer measurements [%d] than unknowns [%d]\n"), n, m);
exit(1);
}
if(!jacf){
fprintf(stderr, RCAT("No function specified for computing the jacobian in ", LEVMAR_BC_DER)
RCAT("().\nIf no such function is available, use ", LEVMAR_BC_DIF) RCAT("() rather than ", LEVMAR_BC_DER) "()\n");
exit(1);
}
if(!BOXCHECK(lb, ub, m)){
fprintf(stderr, LCAT(LEVMAR_BC_DER, "(): at least one lower bound exceeds the upper one\n"));
exit(1);
}
if(opts){
tau=opts[0];
eps1=opts[1];
eps2=opts[2];
eps2_sq=opts[2]*opts[2];
eps3=opts[3];
}
else{ // use default values
tau=CNST(LM_INIT_MU);
eps1=CNST(LM_STOP_THRESH);
eps2=CNST(LM_STOP_THRESH);
eps2_sq=CNST(LM_STOP_THRESH)*CNST(LM_STOP_THRESH);
eps3=CNST(LM_STOP_THRESH);
}
if(!work){
worksz=LM_DER_WORKSZ(m, n); //2*n+4*m + n*m + m*m;
work=(LM_REAL *)malloc(worksz*sizeof(LM_REAL)); /* allocate a big chunk in one step */
if(!work){
fprintf(stderr, LCAT(LEVMAR_BC_DER, "(): memory allocation request failed\n"));
exit(1);
}
freework=1;
}
/* set up work arrays */
e=work;
hx=e + n;
jacTe=hx + n;
jac=jacTe + m;
jacTjac=jac + nm;
Dp=jacTjac + m*m;
diag_jacTjac=Dp + m;
pDp=diag_jacTjac + m;
fstate.n=n;
fstate.hx=hx;
fstate.x=x;
fstate.adata=adata;
fstate.nfev=&nfev;
/* see if starting point is within the feasile set */
for(i=0; i<m; ++i)
pDp[i]=p[i];
BOXPROJECT(p, lb, ub, m); /* project to feasible set */
for(i=0; i<m; ++i)
if(pDp[i]!=p[i])
fprintf(stderr, RCAT("Warning: component %d of starting point not feasible in ", LEVMAR_BC_DER) "()! [%g projected to %g]\n",
i, p[i], pDp[i]);
/* compute e=x - f(p) and its L2 norm */
(*func)(p, hx, m, n, adata); nfev=1;
for(i=0, p_eL2=0.0; i<n; ++i){
e[i]=tmp=x[i]-hx[i];
p_eL2+=tmp*tmp;
}
init_p_eL2=p_eL2;
for(k=stop=0; k<itmax && !stop; ++k){
//printf("%d %.15g\n", k, 0.5*p_eL2);
/* Note that p and e have been updated at a previous iteration */
if(p_eL2<=eps3){ /* error is small */
stop=6;
break;
}
/* Compute the jacobian J at p, J^T J, J^T e, ||J^T e||_inf and ||p||^2.
* Since J^T J is symmetric, its computation can be speeded up by computing
* only its upper triangular part and copying it to the lower part
*/
(*jacf)(p, jac, m, n, adata); ++njev;
/* J^T J, J^T e */
if(nm<__BLOCKSZ__SQ){ // this is a small problem
/* This is the straightforward way to compute J^T J, J^T e. However, due to
* its noncontinuous memory access pattern, it incures many cache misses when
* applied to large minimization problems (i.e. problems involving a large
* number of free variables and measurements), in which J is too large to
* fit in the L1 cache. For such problems, a cache-efficient blocking scheme
* is preferable.
*
* Thanks to John Nitao of Lawrence Livermore Lab for pointing out this
* performance problem.
*
* On the other hand, the straightforward algorithm is faster on small
* problems since in this case it avoids the overheads of blocking.
*/
for(i=0; i<m; ++i){
for(j=i; j<m; ++j){
int lm;
for(l=0, tmp=0.0; l<n; ++l){
lm=l*m;
tmp+=jac[lm+i]*jac[lm+j];
}
/* store tmp in the corresponding upper and lower part elements */
jacTjac[i*m+j]=jacTjac[j*m+i]=tmp;
}
/* J^T e */
for(l=0, tmp=0.0; l<n; ++l)
tmp+=jac[l*m+i]*e[l];
jacTe[i]=tmp;
}
}
else{ // this is a large problem
/* Cache efficient computation of J^T J based on blocking
*/
TRANS_MAT_MAT_MULT(jac, jacTjac, n, m);
/* cache efficient computation of J^T e */
for(i=0; i<m; ++i)
jacTe[i]=0.0;
for(i=0; i<n; ++i){
register LM_REAL *jacrow;
for(l=0, jacrow=jac+i*m, tmp=e[i]; l<m; ++l)
jacTe[l]+=jacrow[l]*tmp;
}
}
/* Compute ||J^T e||_inf and ||p||^2. Note that ||J^T e||_inf
* is computed for free (i.e. inactive) variables only.
* At a local minimum, if p[i]==ub[i] then g[i]>0;
* if p[i]==lb[i] g[i]<0; otherwise g[i]=0
*/
for(i=j=numactive=0, p_L2=jacTe_inf=0.0; i<m; ++i){
if(ub && p[i]==ub[i]){ ++numactive; if(jacTe[i]>0.0) ++j; }
else if(lb && p[i]==lb[i]){ ++numactive; if(jacTe[i]<0.0) ++j; }
else if(jacTe_inf < (tmp=FABS(jacTe[i]))) jacTe_inf=tmp;
diag_jacTjac[i]=jacTjac[i*m+i]; /* save diagonal entries so that augmentation can be later canceled */
p_L2+=p[i]*p[i];
}
//p_L2=sqrt(p_L2);
#if 0
if(!(k%100)){
printf("Current estimate: ");
for(i=0; i<m; ++i)
printf("%.9g ", p[i]);
printf("-- errors %.9g %0.9g, #active %d [%d]\n", jacTe_inf, p_eL2, numactive, j);
}
#endif
/* check for convergence */
if(j==numactive && (jacTe_inf <= eps1)){
Dp_L2=0.0; /* no increment for p in this case */
stop=1;
break;
}
/* compute initial damping factor */
if(k==0){
if(!lb && !ub){ /* no bounds */
for(i=0, tmp=LM_REAL_MIN; i<m; ++i)
if(diag_jacTjac[i]>tmp) tmp=diag_jacTjac[i]; /* find max diagonal element */
mu=tau*tmp;
}
else
mu=CNST(0.5)*tau*p_eL2; /* use Kanzow's starting mu */
}
/* determine increment using a combination of adaptive damping, line search and projected gradient search */
while(1){
/* augment normal equations */
for(i=0; i<m; ++i)
jacTjac[i*m+i]+=mu;
/* solve augmented equations */
/* 5 alternatives are available: LU, Cholesky, 2 variants of QR decomposition and SVD.
* Cholesky is the fastest but might be inaccurate; QR is slower but more accurate;
* SVD is the slowest but most accurate; LU offers a tradeoff between accuracy and speed
*/
issolved=AX_EQ_B_LU(jacTjac, jacTe, Dp, m);
//issolved=AX_EQ_B_CHOL(jacTjac, jacTe, Dp, m);
//issolved=AX_EQ_B_QR(jacTjac, jacTe, Dp, m);
//issolved=AX_EQ_B_QRLS(jacTjac, jacTe, Dp, m, m);
//issolved=AX_EQ_B_SVD(jacTjac, jacTe, Dp, m);
if(issolved){
for(i=0; i<m; ++i)
pDp[i]=p[i] + Dp[i];
/* compute p's new estimate and ||Dp||^2 */
BOXPROJECT(pDp, lb, ub, m); /* project to feasible set */
for(i=0, Dp_L2=0.0; i<m; ++i){
Dp[i]=tmp=pDp[i]-p[i];
Dp_L2+=tmp*tmp;
}
//Dp_L2=sqrt(Dp_L2);
if(Dp_L2<=eps2_sq*p_L2){ /* relative change in p is small, stop */
stop=2;
break;
}
if(Dp_L2>=(p_L2+eps2)/(CNST(EPSILON)*CNST(EPSILON))){ /* almost singular */
stop=4;
break;
}
(*func)(pDp, hx, m, n, adata); ++nfev; /* evaluate function at p + Dp */
for(i=0, pDp_eL2=0.0; i<n; ++i){ /* compute ||e(pDp)||_2 */
hx[i]=tmp=x[i]-hx[i];
pDp_eL2+=tmp*tmp;
}
if(pDp_eL2<=gamma_sq*p_eL2){
for(i=0, dL=0.0; i<m; ++i)
dL+=Dp[i]*(mu*Dp[i]+jacTe[i]);
#if 1
if(dL>0.0){
dF=p_eL2-pDp_eL2;
tmp=(CNST(2.0)*dF/dL-CNST(1.0));
tmp=CNST(1.0)-tmp*tmp*tmp;
mu=mu*( (tmp>=CNST(ONE_THIRD))? tmp : CNST(ONE_THIRD) );
}
else
mu=(mu>=pDp_eL2)? pDp_eL2 : mu; /* pDp_eL2 is the new pDp_eL2 */
#else
mu=(mu>=pDp_eL2)? pDp_eL2 : mu; /* pDp_eL2 is the new pDp_eL2 */
#endif
nu=2;
for(i=0 ; i<m; ++i) /* update p's estimate */
p[i]=pDp[i];
for(i=0; i<n; ++i) /* update e and ||e||_2 */
e[i]=hx[i];
p_eL2=pDp_eL2;
++nLMsteps;
gprevtaken=0;
break;
}
}
else{
/* the augmented linear system could not be solved, increase mu */
mu*=nu;
nu2=nu<<1; // 2*nu;
if(nu2<=nu){ /* nu has wrapped around (overflown). Thanks to Frank Jordan for spotting this case */
stop=5;
break;
}
nu=nu2;
for(i=0; i<m; ++i) /* restore diagonal J^T J entries */
jacTjac[i*m+i]=diag_jacTjac[i];
continue; /* solve again with increased nu */
}
/* if this point is reached, the LM step did not reduce the error;
* see if it is a descent direction
*/
/* negate jacTe (i.e. g) & compute g^T * Dp */
for(i=0, jacTeDp=0.0; i<m; ++i){
jacTe[i]=-jacTe[i];
jacTeDp+=jacTe[i]*Dp[i];
}
if(jacTeDp<=-rho*pow(Dp_L2, _POW_/CNST(2.0))){
/* Dp is a descent direction; do a line search along it */
int mxtake, iretcd;
LM_REAL stepmx;
tmp=(LM_REAL)sqrt(p_L2); stepmx=CNST(1e3)*( (tmp>=CNST(1.0))? tmp : CNST(1.0) );
#if 1
/* use Schnabel's backtracking line search; it requires fewer "func" evaluations */
LNSRCH(m, p, p_eL2, jacTe, Dp, alpha, pDp, &pDp_eL2, func, fstate,
&mxtake, &iretcd, stepmx, steptl, NULL); /* NOTE: LNSRCH() updates hx */
if(iretcd!=0) goto gradproj; /* rather inelegant but effective way to handle LNSRCH() failures... */
#else
/* use the simpler (but slower!) line search described by Kanzow */
for(t=tini; t>tmin; t*=beta){
for(i=0; i<m; ++i){
pDp[i]=p[i] + t*Dp[i];
//pDp[i]=__MEDIAN3(lb[i], pDp[i], ub[i]); /* project to feasible set */
}
(*func)(pDp, hx, m, n, adata); ++nfev; /* evaluate function at p + t*Dp */
for(i=0, pDp_eL2=0.0; i<n; ++i){ /* compute ||e(pDp)||_2 */
hx[i]=tmp=x[i]-hx[i];
pDp_eL2+=tmp*tmp;
}
//if(CNST(0.5)*pDp_eL2<=CNST(0.5)*p_eL2 + t*alpha*jacTeDp) break;
if(pDp_eL2<=p_eL2 + CNST(2.0)*t*alpha*jacTeDp) break;
}
#endif
++nLSsteps;
gprevtaken=0;
/* NOTE: new estimate for p is in pDp, associated error in hx and its norm in pDp_eL2.
* These values are used below to update their corresponding variables
*/
}
else{
gradproj: /* Note that this point can also be reached via a goto when LNSRCH() fails */
/* jacTe is a descent direction; make a projected gradient step */
/* if the previous step was along the gradient descent, try to use the t employed in that step */
/* compute ||g|| */
for(i=0, tmp=0.0; i<m; ++i)
tmp=jacTe[i]*jacTe[i];
tmp=(LM_REAL)sqrt(tmp);
tmp=CNST(100.0)/(CNST(1.0)+tmp);
t0=(tmp<=tini)? tmp : tini; /* guard against poor scaling & large steps; see (3.50) in C.T. Kelley's book */
for(t=(gprevtaken)? t : t0; t>tming; t*=beta){
for(i=0; i<m; ++i)
pDp[i]=p[i] - t*jacTe[i];
BOXPROJECT(pDp, lb, ub, m); /* project to feasible set */
for(i=0; i<m; ++i)
Dp[i]=pDp[i]-p[i];
(*func)(pDp, hx, m, n, adata); ++nfev; /* evaluate function at p - t*g */
for(i=0, pDp_eL2=0.0; i<n; ++i){ /* compute ||e(pDp)||_2 */
hx[i]=tmp=x[i]-hx[i];
pDp_eL2+=tmp*tmp;
}
for(i=0, tmp=0.0; i<m; ++i) /* compute ||g^T * Dp|| */
tmp+=jacTe[i]*Dp[i];
if(gprevtaken && pDp_eL2<=p_eL2 + CNST(2.0)*CNST(0.99999)*tmp){ /* starting t too small */
t=t0;
gprevtaken=0;
continue;
}
//if(CNST(0.5)*pDp_eL2<=CNST(0.5)*p_eL2 + alpha*tmp) break;
if(pDp_eL2<=p_eL2 + CNST(2.0)*alpha*tmp) break;
}
++nPGsteps;
gprevtaken=1;
/* NOTE: new estimate for p is in pDp, associated error in hx and its norm in pDp_eL2 */
}
/* update using computed values */
for(i=0, Dp_L2=0.0; i<m; ++i){
tmp=pDp[i]-p[i];
Dp_L2+=tmp*tmp;
}
//Dp_L2=sqrt(Dp_L2);
if(Dp_L2<=eps2_sq*p_L2){ /* relative change in p is small, stop */
stop=2;
break;
}
for(i=0 ; i<m; ++i) /* update p's estimate */
p[i]=pDp[i];
for(i=0; i<n; ++i) /* update e and ||e||_2 */
e[i]=hx[i];
p_eL2=pDp_eL2;
break;
} /* inner loop */
}
if(k>=itmax) stop=3;
for(i=0; i<m; ++i) /* restore diagonal J^T J entries */
jacTjac[i*m+i]=diag_jacTjac[i];
if(info){
info[0]=init_p_eL2;
info[1]=p_eL2;
info[2]=jacTe_inf;
info[3]=Dp_L2;
for(i=0, tmp=LM_REAL_MIN; i<m; ++i)
if(tmp<jacTjac[i*m+i]) tmp=jacTjac[i*m+i];
info[4]=mu/tmp;
info[5]=(LM_REAL)k;
info[6]=(LM_REAL)stop;
info[7]=(LM_REAL)nfev;
info[8]=(LM_REAL)njev;
}
/* covariance matrix */
if(covar){
LEVMAR_COVAR(jacTjac, covar, p_eL2, m, n);
}
if(freework) free(work);
#if 0
printf("%d LM steps, %d line search, %d projected gradient\n", nLMsteps, nLSsteps, nPGsteps);
#endif
return (stop!=4)? k : -1;
}
int LEVMAR_DER(
void (*func)(LM_REAL *p, LM_REAL *hx, int m, int n, void *adata), /* functional relation describing measurements. A p \in R^m yields a \hat{x} \in R^n */
void (*jacf)(LM_REAL *p, LM_REAL *j, int m, int n, void *adata), /* function to evaluate the jacobian \part x / \part p */
LM_REAL *p, /* I/O: initial parameter estimates. On output has the estimated solution */
LM_REAL *x, /* I: measurement vector */
int m, /* I: parameter vector dimension (i.e. #unknowns) */
int n, /* I: measurement vector dimension */
int itmax, /* I: maximum number of iterations */
LM_REAL opts[4], /* I: minim. options [\mu, \epsilon1, \epsilon2, \epsilon3]. Respectively the scale factor for initial \mu,
* stopping thresholds for ||J^T e||_inf, ||Dp||_2 and ||e||_2. Set to NULL for defaults to be used
*/
LM_REAL info[LM_INFO_SZ],
/* O: information regarding the minimization. Set to NULL if don't care
* info[0]= ||e||_2 at initial p.
* info[1-4]=[ ||e||_2, ||J^T e||_inf, ||Dp||_2, mu/max[J^T J]_ii ], all computed at estimated p.
* info[5]= # iterations,
* info[6]=reason for terminating: 1 - stopped by small gradient J^T e
* 2 - stopped by small Dp
* 3 - stopped by itmax
* 4 - singular matrix. Restart from current p with increased mu
* 5 - no further error reduction is possible. Restart with increased mu
* 6 - stopped by small ||e||_2
* info[7]= # function evaluations
* info[8]= # jacobian evaluations
*/
LM_REAL *work, /* working memory, allocate if NULL */
LM_REAL *covar, /* O: Covariance matrix corresponding to LS solution; mxm. Set to NULL if not needed. */
void *adata) /* pointer to possibly additional data, passed uninterpreted to func & jacf.
* Set to NULL if not needed
*/
{
register int i, j, k, l;
int worksz, freework=0, issolved;
/* temp work arrays */
LM_REAL *e, /* nx1 */
*hx, /* \hat{x}_i, nx1 */
*jacTe, /* J^T e_i mx1 */
*jac, /* nxm */
*jacTjac, /* mxm */
*Dp, /* mx1 */
*diag_jacTjac, /* diagonal of J^T J, mx1 */
*pDp; /* p + Dp, mx1 */
register LM_REAL mu, /* damping constant */
tmp; /* mainly used in matrix & vector multiplications */
LM_REAL p_eL2, jacTe_inf, pDp_eL2; /* ||e(p)||_2, ||J^T e||_inf, ||e(p+Dp)||_2 */
LM_REAL p_L2, Dp_L2=LM_REAL_MAX, dF, dL;
LM_REAL tau, eps1, eps2, eps2_sq, eps3;
LM_REAL init_p_eL2;
int nu=2, nu2, stop, nfev, njev=0;
const int nm=n*m;
mu=jacTe_inf=0.0; /* -Wall */
if(n<m){
fprintf(stderr, LCAT(LEVMAR_DER, "(): cannot solve a problem with fewer measurements [%d] than unknowns [%d]\n"), n, m);
return -1;
}
if(!jacf){
fprintf(stderr, RCAT("No function specified for computing the jacobian in ", LEVMAR_DER)
RCAT("().\nIf no such function is available, use ", LEVMAR_DIF) RCAT("() rather than ", LEVMAR_DER) "()\n");
return -1;
}
if(opts){
tau=opts[0];
eps1=opts[1];
eps2=opts[2];
eps2_sq=opts[2]*opts[2];
eps3=opts[3];
}
else{ // use default values
tau=CNST(LM_INIT_MU);
eps1=CNST(LM_STOP_THRESH);
eps2=CNST(LM_STOP_THRESH);
eps2_sq=CNST(LM_STOP_THRESH)*CNST(LM_STOP_THRESH);
eps3=CNST(LM_STOP_THRESH);
}
if(!work){
worksz=LM_DER_WORKSZ(m, n); //2*n+4*m + n*m + m*m;
work=(LM_REAL *)malloc(worksz*sizeof(LM_REAL)); /* allocate a big chunk in one step */
if(!work){
fprintf(stderr, LCAT(LEVMAR_DER, "(): memory allocation request failed\n"));
return -1;
}
freework=1;
}
/* set up work arrays */
e=work;
hx=e + n;
jacTe=hx + n;
jac=jacTe + m;
jacTjac=jac + nm;
Dp=jacTjac + m*m;
diag_jacTjac=Dp + m;
pDp=diag_jacTjac + m;
/* compute e=x - f(p) and its L2 norm */
(*func)(p, hx, m, n, adata); nfev=1;
for(i=0, p_eL2=0.0; i<n; ++i){
e[i]=tmp=x[i]-hx[i];
p_eL2+=tmp*tmp;
}
init_p_eL2=p_eL2;
for(k=stop=0; k<itmax && !stop; ++k){
/* Note that p and e have been updated at a previous iteration */
if(p_eL2<=eps3){ /* error is small */
stop=6;
break;
}
/* Compute the jacobian J at p, J^T J, J^T e, ||J^T e||_inf and ||p||^2.
* Since J^T J is symmetric, its computation can be speeded up by computing
* only its upper triangular part and copying it to the lower part
*/
(*jacf)(p, jac, m, n, adata); ++njev;
/* J^T J, J^T e */
if(nm<__BLOCKSZ__SQ){ // this is a small problem
/* This is the straightforward way to compute J^T J, J^T e. However, due to
* its noncontinuous memory access pattern, it incures many cache misses when
* applied to large minimization problems (i.e. problems involving a large
* number of free variables and measurements), in which J is too large to
* fit in the L1 cache. For such problems, a cache-efficient blocking scheme
* is preferable.
*
* Thanks to John Nitao of Lawrence Livermore Lab for pointing out this
* performance problem.
*
* On the other hand, the straightforward algorithm is faster on small
* problems since in this case it avoids the overheads of blocking.
*/
for(i=0; i<m; ++i){
for(j=i; j<m; ++j){
int lm;
for(l=0, tmp=0.0; l<n; ++l){
lm=l*m;
tmp+=jac[lm+i]*jac[lm+j];
}
/* store tmp in the corresponding upper and lower part elements */
jacTjac[i*m+j]=jacTjac[j*m+i]=tmp;
}
/* J^T e */
for(l=0, tmp=0.0; l<n; ++l)
tmp+=jac[l*m+i]*e[l];
jacTe[i]=tmp;
}
}
else{ // this is a large problem
/* Cache efficient computation of J^T J based on blocking
*/
TRANS_MAT_MAT_MULT(jac, jacTjac, n, m);
/* cache efficient computation of J^T e */
for(i=0; i<m; ++i)
jacTe[i]=0.0;
for(i=0; i<n; ++i){
register LM_REAL *jacrow;
for(l=0, jacrow=jac+i*m, tmp=e[i]; l<m; ++l)
jacTe[l]+=jacrow[l]*tmp;
}
}
/* Compute ||J^T e||_inf and ||p||^2 */
for(i=0, p_L2=jacTe_inf=0.0; i<m; ++i){
if(jacTe_inf < (tmp=FABS(jacTe[i]))) jacTe_inf=tmp;
diag_jacTjac[i]=jacTjac[i*m+i]; /* save diagonal entries so that augmentation can be later canceled */
p_L2+=p[i]*p[i];
}
//p_L2=sqrt(p_L2);
#if 0
if(!(k%10)){
printf("Iter: %d, estimate: ", k);
for(i=0; i<m; ++i)
printf("%.9g ", p[i]);
printf("-- errors %.9g %0.9g\n", jacTe_inf, p_eL2);
}
#endif
/* check for convergence */
if((jacTe_inf <= eps1)){
Dp_L2=0.0; /* no increment for p in this case */
stop=1;
break;
}
/* compute initial damping factor */
if(k==0){
for(i=0, tmp=LM_REAL_MIN; i<m; ++i)
if(diag_jacTjac[i]>tmp) tmp=diag_jacTjac[i]; /* find max diagonal element */
mu=tau*tmp;
}
/* determine increment using adaptive damping */
while(1){
/* augment normal equations */
for(i=0; i<m; ++i)
jacTjac[i*m+i]+=mu;
/* solve augmented equations */
#ifdef HAVE_LAPACK
/* 5 alternatives are available: LU, Cholesky, 2 variants of QR decomposition and SVD.
* Cholesky is the fastest but might be inaccurate; QR is slower but more accurate;
* SVD is the slowest but most accurate; LU offers a tradeoff between accuracy and speed
*/
issolved=AX_EQ_B_LU(jacTjac, jacTe, Dp, m);
//issolved=AX_EQ_B_CHOL(jacTjac, jacTe, Dp, m);
//issolved=AX_EQ_B_QR(jacTjac, jacTe, Dp, m);
//issolved=AX_EQ_B_QRLS(jacTjac, jacTe, Dp, m, m);
//issolved=AX_EQ_B_SVD(jacTjac, jacTe, Dp, m);
#else
/* use the LU included with levmar */
issolved=AX_EQ_B_LU(jacTjac, jacTe, Dp, m);
#endif /* HAVE_LAPACK */
if(issolved){
/* compute p's new estimate and ||Dp||^2 */
for(i=0, Dp_L2=0.0; i<m; ++i){
pDp[i]=p[i] + (tmp=Dp[i]);
Dp_L2+=tmp*tmp;
}
//Dp_L2=sqrt(Dp_L2);
if(Dp_L2<=eps2_sq*p_L2){ /* relative change in p is small, stop */
//if(Dp_L2<=eps2*(p_L2 + eps2)){ /* relative change in p is small, stop */
stop=2;
break;
}
if(Dp_L2>=(p_L2+eps2)/(CNST(EPSILON)*CNST(EPSILON))){ /* almost singular */
//if(Dp_L2>=(p_L2+eps2)/CNST(EPSILON)){ /* almost singular */
stop=4;
break;
}
(*func)(pDp, hx, m, n, adata); ++nfev; /* evaluate function at p + Dp */
for(i=0, pDp_eL2=0.0; i<n; ++i){ /* compute ||e(pDp)||_2 */
hx[i]=tmp=x[i]-hx[i];
pDp_eL2+=tmp*tmp;
}
for(i=0, dL=0.0; i<m; ++i)
dL+=Dp[i]*(mu*Dp[i]+jacTe[i]);
dF=p_eL2-pDp_eL2;
if(dL>0.0 && dF>0.0){ /* reduction in error, increment is accepted */
tmp=(CNST(2.0)*dF/dL-CNST(1.0));
tmp=CNST(1.0)-tmp*tmp*tmp;
mu=mu*( (tmp>=CNST(ONE_THIRD))? tmp : CNST(ONE_THIRD) );
nu=2;
for(i=0 ; i<m; ++i) /* update p's estimate */
p[i]=pDp[i];
for(i=0; i<n; ++i) /* update e and ||e||_2 */
e[i]=hx[i];
p_eL2=pDp_eL2;
break;
}
}
/* if this point is reached, either the linear system could not be solved or
* the error did not reduce; in any case, the increment must be rejected
*/
mu*=nu;
nu2=nu<<1; // 2*nu;
if(nu2<=nu){ /* nu has wrapped around (overflown). Thanks to Frank Jordan for spotting this case */
stop=5;
break;
}
nu=nu2;
for(i=0; i<m; ++i) /* restore diagonal J^T J entries */
jacTjac[i*m+i]=diag_jacTjac[i];
} /* inner loop */
}
if(k>=itmax) stop=3;
for(i=0; i<m; ++i) /* restore diagonal J^T J entries */
jacTjac[i*m+i]=diag_jacTjac[i];
if(info){
info[0]=init_p_eL2;
info[1]=p_eL2;
info[2]=jacTe_inf;
info[3]=Dp_L2;
for(i=0, tmp=LM_REAL_MIN; i<m; ++i)
if(tmp<jacTjac[i*m+i]) tmp=jacTjac[i*m+i];
info[4]=mu/tmp;
info[5]=(LM_REAL)k;
info[6]=(LM_REAL)stop;
info[7]=(LM_REAL)nfev;
info[8]=(LM_REAL)njev;
}
/* covariance matrix */
if(covar){
LEVMAR_COVAR(jacTjac, covar, p_eL2, m, n);
}
if(freework) free(work);
return (stop!=4)? k : -1;
}
/* Similar to the LEVMAR_LEC_DER() function above, except that the jacobian is approximated
* with the aid of finite differences (forward or central, see the comment for the opts argument)
*/
int LEVMAR_LEC_DIF(
void (*func)(LM_REAL *p, LM_REAL *hx, int m, int n, void *adata), /* functional relation describing measurements. A p \in R^m yields a \hat{x} \in R^n */
LM_REAL *p, /* I/O: initial parameter estimates. On output has the estimated solution */
LM_REAL *x, /* I: measurement vector */
int m, /* I: parameter vector dimension (i.e. #unknowns) */
int n, /* I: measurement vector dimension */
LM_REAL *A, /* I: constraints matrix, kxm */
LM_REAL *b, /* I: right hand constraints vector, kx1 */
int k, /* I: number of contraints (i.e. A's #rows) */
int itmax, /* I: maximum number of iterations */
LM_REAL opts[5], /* I: opts[0-3] = minim. options [\mu, \epsilon1, \epsilon2, \epsilon3, \delta]. Respectively the
* scale factor for initial \mu, stopping thresholds for ||J^T e||_inf, ||Dp||_2 and ||e||_2 and
* the step used in difference approximation to the jacobian. Set to NULL for defaults to be used.
* If \delta<0, the jacobian is approximated with central differences which are more accurate
* (but slower!) compared to the forward differences employed by default.
*/
LM_REAL info[LM_INFO_SZ],
/* O: information regarding the minimization. Set to NULL if don't care
* info[0]= ||e||_2 at initial p.
* info[1-4]=[ ||e||_2, ||J^T e||_inf, ||Dp||_2, mu/max[J^T J]_ii ], all computed at estimated p.
* info[5]= # iterations,
* info[6]=reason for terminating: 1 - stopped by small gradient J^T e
* 2 - stopped by small Dp
* 3 - stopped by itmax
* 4 - singular matrix. Restart from current p with increased mu
* 5 - no further error reduction is possible. Restart with increased mu
* 6 - stopped by small ||e||_2
* info[7]= # function evaluations
* info[8]= # jacobian evaluations
*/
LM_REAL *work, /* working memory, allocate if NULL */
LM_REAL *covar, /* O: Covariance matrix corresponding to LS solution; mxm. Set to NULL if not needed. */
void *adata) /* pointer to possibly additional data, passed uninterpreted to func.
* Set to NULL if not needed
*/
{
struct LMLEC_DATA data;
LM_REAL *ptr, *Z, *pp, *p0, *Zimm; /* Z is mxmm */
int mm, ret;
register int i, j;
register LM_REAL tmp;
LM_REAL locinfo[LM_INFO_SZ];
mm=m-k;
ptr=(LM_REAL *)malloc((2*m + m*mm + mm)*sizeof(LM_REAL));
if(!ptr){
fprintf(stderr, LCAT(LEVMAR_LEC_DIF, "(): memory allocation request failed\n"));
exit(1);
}
data.p=p;
p0=ptr;
data.c=p0+m;
data.Z=Z=data.c+m;
data.jac=NULL;
pp=data.Z+m*mm;
data.ncnstr=k;
data.func=func;
data.jacf=NULL;
data.adata=adata;
LMLEC_ELIM(A, b, data.c, NULL, Z, k, m); // compute c, Z
/* compute pp s.t. p = c + Z*pp or (Z^T Z)*pp=Z^T*(p-c)
* Due to orthogonality, Z^T Z = I and the last equation
* becomes pp=Z^T*(p-c). Also, save the starting p in p0
*/
for(i=0; i<m; ++i){
p0[i]=p[i];
p[i]-=data.c[i];
}
/* Z^T*(p-c) */
for(i=0; i<mm; ++i){
for(j=0, tmp=0.0; j<m; ++j)
tmp+=Z[j*mm+i]*p[j];
pp[i]=tmp;
}
/* compute the p corresponding to pp (i.e. c + Z*pp) and compare with p0 */
for(i=0; i<m; ++i){
Zimm=Z+i*mm;
for(j=0, tmp=data.c[i]; j<mm; ++j)
tmp+=Zimm[j]*pp[j]; // tmp+=Z[i*mm+j]*pp[j];
if(FABS(tmp-p0[i])>CNST(1E-03))
fprintf(stderr, RCAT("Warning: component %d of starting point not feasible in ", LEVMAR_LEC_DIF) "()! [%.10g reset to %.10g]\n",
i, p0[i], tmp);
}
if(!info) info=locinfo; /* make sure that LEVMAR_DIF() is called with non-null info */
/* note that covariance computation is not requested from LEVMAR_DIF() */
ret=LEVMAR_DIF(LMLEC_FUNC, pp, x, mm, n, itmax, opts, info, work, NULL, (void *)&data);
/* p=c + Z*pp */
for(i=0; i<m; ++i){
Zimm=Z+i*mm;
for(j=0, tmp=data.c[i]; j<mm; ++j)
tmp+=Zimm[j]*pp[j]; // tmp+=Z[i*mm+j]*pp[j];
p[i]=tmp;
}
/* compute the jacobian with finite differences and use it to estimate the covariance */
if(covar){
LM_REAL *hx, *wrk, *jac;
hx=(LM_REAL *)malloc((2*n+n*m)*sizeof(LM_REAL));
if(!work){
fprintf(stderr, LCAT(LEVMAR_LEC_DIF, "(): memory allocation request failed\n"));
exit(1);
}
wrk=hx+n;
jac=wrk+n;
(*func)(p, hx, m, n, adata); /* evaluate function at p */
FDIF_FORW_JAC_APPROX(func, p, hx, wrk, (LM_REAL)LM_DIFF_DELTA, jac, m, n, adata); /* compute the jacobian at p */
TRANS_MAT_MAT_MULT(jac, covar, n, m, __BLOCKSZ__); /* covar = J^T J */
LEVMAR_COVAR(covar, covar, info[1], m, n);
free(hx);
}
free(ptr);
return ret;
}
