void New_Line(int i)
{
switch(i)
{
case 1:
UART1_OutChar(0x0A); /* n is between 0 and 9 */
UART1_OutChar(0x0D);
break;
case 2:
UART2_OutChar(0x0A);
UART2_OutChar(0x0D);
break;
case 3:
UART3_OutChar(0x0A);
UART3_OutChar(0x0D);
break;
case 4:
UART4_OutChar(0x0A);
UART4_OutChar(0x0D);
break;
case 5:
UART5_OutChar(0x0A);
UART5_OutChar(0x0D);
break;
case 7:
UART7_OutChar(0x0A);
UART7_OutChar(0x0D);
break;
}
}
//---------------------UART_InUHex----------------------------------------
// Accepts ASCII input in unsigned hexadecimal (base 16) format
// Input: none
// Output: 32-bit unsigned number
// No '$' or '0x' need be entered, just the 1 to 8 hex digits
// It will convert lower case a-f to uppercase A-F
// and converts to a 16 bit unsigned number
// value range is 0 to FFFFFFFF
// If you enter a number above FFFFFFFF, it will return an incorrect value
// Backspace will remove last digit typed
unsigned long UART1_InUHex(void){
unsigned long number=0, digit, length=0;
char character;
character = UART1_InChar();
while(character != CR){
digit = 0x10; // assume bad
if((character>='0') && (character<='9')){
digit = character-'0';
}
else if((character>='A') && (character<='F')){
digit = (character-'A')+0xA;
}
else if((character>='a') && (character<='f')){
digit = (character-'a')+0xA;
}
// If the character is not 0-9 or A-F, it is ignored and not echoed
if(digit <= 0xF){
number = number*0x10+digit;
length++;
UART1_OutChar(character);
}
// Backspace outputted and return value changed if a backspace is inputted
else if((character==BS) && length){
number /= 0x10;
length--;
UART1_OutChar(character);
}
character = UART1_InChar();
}
return number;
}
void Print_Space(int n,int i)
{
while(n)
{
switch(i)
{
case 1:
UART1_OutChar(' '); /* n is between 0 and 9 */
break;
case 2:
UART2_OutChar(' ');
break;
case 3:
UART3_OutChar(' ');
break;
case 4:
UART4_OutChar(' ');
break;
case 5:
UART5_OutChar(' ');
break;
case 7:
UART7_OutChar(' ');
break;
}
n--;
}
}
void UART_OutUDec(unsigned long n,int i){
if(n >= 10){
UART_OutUDec(n/10,i);
n = n%10;
}
switch(i)
{
case 1:
UART1_OutChar(n+'0'); /* n is between 0 and 9 */
break;
case 2:
UART2_OutChar(n+'0');
break;
case 3:
UART3_OutChar(n+'0');
break;
case 4:
UART4_OutChar(n+'0');
break;
case 5:
UART5_OutChar(n+'0');
break;
case 7:
UART7_OutChar(n+'0');
break;
}
}
//--------------------------UART_OutUHex----------------------------
// Output a 32-bit number in unsigned hexadecimal format
// Input: 32-bit number to be transferred
// Output: none
// Variable format 1 to 8 digits with no space before or after
void UART1_OutUHex(unsigned long number){
// This function uses recursion to convert the number of
// unspecified length as an ASCII string
if(number >= 0x10){
UART1_OutUHex(number/0x10);
UART1_OutUHex(number%0x10);
}
else{
if(number < 0xA){
UART1_OutChar(number+'0');
}
else{
UART1_OutChar((number-0x0A)+'A');
}
}
}
//-----------------------UART_OutUDec-----------------------
// Output a 32-bit number in unsigned decimal format
// Input: 32-bit number to be transferred
// Output: none
// Variable format 1-10 digits with no space before or after
void UART1_OutUDec(unsigned long n){
// This function uses recursion to convert decimal number
// of unspecified length as an ASCII string
if(n >= 10){
UART1_OutUDec(n/10);
n = n%10;
}
UART1_OutChar(n+'0'); /* n is between 0 and 9 */
}
//------------UART_InString------------
// Accepts ASCII characters from the serial port
// and adds them to a string until <enter> is typed
// or until max length of the string is reached.
// It echoes each character as it is inputted.
// If a backspace is inputted, the string is modified
// and the backspace is echoed
// terminates the string with a null character
// uses busy-waiting synchronization on RDRF
// Input: pointer to empty buffer, size of buffer
// Output: Null terminated string
// -- Modified by Agustinus Darmawan + Mingjie Qiu --
void UART1_InString(char *bufPt, unsigned short max) {
int length=0;
char character;
character = UART1_InChar();
while(character != CR){
if(character == BS){
if(length){
bufPt--;
length--;
UART1_OutChar(BS);
}
}
else if(length < max){
*bufPt = character;
bufPt++;
length++;
UART1_OutChar(character);
}
character = UART1_InChar();
}
*bufPt = 0;
}
//------------UART_InUDec------------
// InUDec accepts ASCII input in unsigned decimal format
// and converts to a 32-bit unsigned number
// valid range is 0 to 4294967295 (2^32-1)
// Input: none
// Output: 32-bit unsigned number
// If you enter a number above 4294967295, it will return an incorrect value
// Backspace will remove last digit typed
unsigned long UART1_InUDec(void){
unsigned long number=0, length=0;
char character;
character = UART1_InChar();
while(character != CR){ // accepts until <enter> is typed
// The next line checks that the input is a digit, 0-9.
// If the character is not 0-9, it is ignored and not echoed
if((character>='0') && (character<='9')) {
number = 10*number+(character-'0'); // this line overflows if above 4294967295
length++;
UART1_OutChar(character);
}
// If the input is a backspace, then the return number is
// changed and a backspace is outputted to the screen
else if((character==BS) && length){
number /= 10;
length--;
UART1_OutChar(character);
}
character = UART1_InChar();
}
return number;
}
void Timer2A_Handler(void){
uint32_t data2[2];
ADC0_In(data2);
uint32_t data = data2[0]; // 2. Sample ADC (12-bit channel 1)
// data=Convert(data); // 4. Convert to distance and create the 8-byte message
uint8_t message[]= {0x02,0,0x2E,0,0,0,0x0D,0x03};
message[1] = (data/1000)%10 + 0x30;
message[3] = (data/100)%10 + 0x30;
message[4] = (data/10)%10 + 0x30;
message[5] = data%10 + 0x30;
for(int i=0; i<8; i++){ // 5. Send the 8-byte message to the other computer (calls UART1_OutChar 8 times)
UART1_OutChar(message[i]);
}
TxCounter++; // 6. increment TxCounter (for debugging)
TIMER2_ICR_R = TIMER_ICR_TATOCINT;// acknowledge TIMER2A timeout... Systick was using .25ms interrupts to transmit data
}
void SysTick_Handler(){
PF2 ^= 0x04; // 1. Toggle heartbeat
uint32_t data = ADC_In(); // 2. Sample ADC (12-bit channel 1)
PF2 ^= 0x04; // 3. Toggle heartbeat
data=Convert(data); // 4. Convert to distance and create the 8-byte message
uint8_t message[]= {0x02,0,0x2E,0,0,0,0x0D,0x03};
message[1] = (data/1000)%10 + 0x30;
message[3] = (data/100)%10 + 0x30;
message[4] = (data/10)%10 + 0x30;
message[5] = data%10 + 0x30;
for(int i=0; i<8; i++){ // 5. Send the 8-byte message to the other computer (calls UART1_OutChar 8 times)
UART1_OutChar(message[i]);
}
TxCounter++; // 6. increment TxCounter (for debugging)
PF2 ^= 0x04; // 7. Toggle heartbeat
NVIC_ST_RELOAD_R = 2000000-1; // 8. Return from interrupt
NVIC_ST_CURRENT_R = 0; // Reset SysTick timer for .25ms
}
void UART_OutChar(unsigned char data,int i)
{
switch(i)
{
case 1:
UART1_OutChar(data);
break;
case 2:
UART2_OutChar(data);
break;
case 3:
UART3_OutChar(data);
break;
case 4:
UART4_OutChar(data);
break;
case 5:
UART5_OutChar(data);
break;
case 7:
UART7_OutChar(data);
break;
}
}
//------------UART_OutString------------
// Output String (NULL termination)
// Input: pointer to a NULL-terminated string to be transferred
// Output: none
void UART1_OutString(char *pt){
while(*pt){
UART1_OutChar(*pt);
pt++;
}
}
