Esempio n. 1
0
void USB_Host_ResetDevice(void)
{
	bool BusSuspended = USB_Host_IsBusSuspended();

	USB_INT_Disable(USB_INT_DDISCI);
	
	USB_Host_WaitMS(20);

	USB_Host_ResetBus();
	while (!(USB_Host_IsResetBusDone()));

	USB_INT_Clear(USB_INT_HSOFI);
	USB_Host_ResumeBus();	
	
	for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
	{
		/* Workaround for powerless-pullup devices. After a USB bus reset,
		   all disconnection interrupts are supressed while a USB frame is
		   looked for - if it is found within 10ms, the device is still
		   present.                                                        */

		if (USB_INT_HasOccurred(USB_INT_HSOFI))
		{
			USB_INT_Clear(USB_INT_DDISCI);
			break;
		}
		
		_delay_ms(1);
	}

	if (BusSuspended)
	  USB_Host_SuspendBus();

	USB_INT_Enable(USB_INT_DDISCI);
}
Esempio n. 2
0
uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
{
	bool BusSuspended    = USB_Host_IsBusSuspended();
	uint8_t ReturnStatus = USB_Host_SendControlRequest_PRV(BufferPtr);

	Pipe_Freeze();

	if (BusSuspended)
	  USB_Host_SuspendBus();

	Pipe_ResetPipe(PIPE_CONTROLPIPE);

	return ReturnStatus;
}
Esempio n. 3
0
uint8_t USB_Host_WaitMS(uint8_t MS)
{
	bool    BusSuspended = USB_Host_IsBusSuspended();
	uint8_t ErrorCode    = HOST_WAITERROR_Successful;
	
	USB_INT_Clear(USB_INT_HSOFI);
	USB_Host_ResumeBus();

	while (MS)
	{
		if (USB_INT_HasOccurred(USB_INT_HSOFI))
		{
			USB_INT_Clear(USB_INT_HSOFI);
			MS--;
		}
					
		if ((USB_IsConnected == false) || (USB_CurrentMode == USB_MODE_DEVICE))
		{
			ErrorCode = HOST_WAITERROR_DeviceDisconnect;
			
			break;
		}

		if (Pipe_IsError() == true)
		{
			Pipe_ClearError();
			ErrorCode = HOST_WAITERROR_PipeError;
			
			break;
		}
		
		if (Pipe_IsStalled() == true)
		{
			Pipe_ClearStall();
			ErrorCode = HOST_WAITERROR_SetupStalled;
			
			break;			
		}
	}

	if (BusSuspended)
	  USB_Host_SuspendBus();

	return ErrorCode;
}
uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
{
	uint8_t* DataStream   = (uint8_t*)BufferPtr;
	bool     BusSuspended = USB_Host_IsBusSuspended();
	uint8_t  ReturnStatus = HOST_SENDCONTROL_Successful;
	uint16_t DataLen      = USB_ControlRequest.wLength;

	USB_Host_ResumeBus();

	if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
	  goto End_Of_Control_Send;

	Pipe_SetPipeToken(PIPE_TOKEN_SETUP);
	Pipe_ClearError();

	Pipe_Unfreeze();

	Pipe_Write_8(USB_ControlRequest.bmRequestType);
	Pipe_Write_8(USB_ControlRequest.bRequest);
	Pipe_Write_16_LE(USB_ControlRequest.wValue);
	Pipe_Write_16_LE(USB_ControlRequest.wIndex);
	Pipe_Write_16_LE(USB_ControlRequest.wLength);

	Pipe_ClearSETUP();

	if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_SetupSent)) != HOST_SENDCONTROL_Successful)
	  goto End_Of_Control_Send;

	Pipe_Freeze();

	if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
	  goto End_Of_Control_Send;

	if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_DIRECTION) == REQDIR_DEVICETOHOST)
	{
		Pipe_SetPipeToken(PIPE_TOKEN_IN);

		if (DataStream != NULL)
		{
			while (DataLen)
			{
				Pipe_Unfreeze();

				if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful)
				  goto End_Of_Control_Send;

				if (!(Pipe_BytesInPipe()))
				  DataLen = 0;

				while (Pipe_BytesInPipe() && DataLen)
				{
					*(DataStream++) = Pipe_Read_8();
					DataLen--;
				}

				Pipe_Freeze();
				Pipe_ClearIN();
			}
		}

		Pipe_SetPipeToken(PIPE_TOKEN_OUT);
		Pipe_Unfreeze();

		if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
		  goto End_Of_Control_Send;

		Pipe_ClearOUT();

		if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
		  goto End_Of_Control_Send;
	}
	else
	{
		if (DataStream != NULL)
		{
			Pipe_SetPipeToken(PIPE_TOKEN_OUT);
			Pipe_Unfreeze();

			while (DataLen)
			{
				if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
				  goto End_Of_Control_Send;

				while (DataLen && (Pipe_BytesInPipe() < USB_Host_ControlPipeSize))
				{
					Pipe_Write_8(*(DataStream++));
					DataLen--;
				}

				Pipe_ClearOUT();
			}

			if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
			  goto End_Of_Control_Send;

			Pipe_Freeze();
		}

		Pipe_SetPipeToken(PIPE_TOKEN_IN);
		Pipe_Unfreeze();

		if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful)
		  goto End_Of_Control_Send;

		Pipe_ClearIN();
	}

End_Of_Control_Send:
	Pipe_Freeze();

	if (BusSuspended)
	  USB_Host_SuspendBus();

	Pipe_ResetPipe(PIPE_CONTROLPIPE);

	return ReturnStatus;
}
Esempio n. 5
0
void USB_Host_ProcessNextHostState(void)
{
	uint8_t ErrorCode    = HOST_ENUMERROR_NoError;
	uint8_t SubErrorCode = HOST_ENUMERROR_NoError;

	static uint16_t WaitMSRemaining;
	static uint8_t  PostWaitState;

	switch (USB_HostState)
	{
		case HOST_STATE_WaitForDevice:
			if (WaitMSRemaining)
			{
				if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
				{
					USB_HostState = PostWaitState;
					ErrorCode     = HOST_ENUMERROR_WaitStage;
					break;
				}
				
				if (!(--WaitMSRemaining))
				  USB_HostState = PostWaitState;
			}
		
			break;
		case HOST_STATE_Powered:
			WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
		
			USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
			break;
		case HOST_STATE_Powered_WaitForDeviceSettle:
			if (WaitMSRemaining--)
			{
				_delay_ms(1);
				break;
			}
			else
			{
				USB_Host_VBUS_Manual_Off();

				USB_OTGPAD_On();
				USB_Host_VBUS_Auto_Enable();
				USB_Host_VBUS_Auto_On();
				
				USB_HostState = HOST_STATE_Powered_WaitForConnect;
			}
			
			break;
		case HOST_STATE_Powered_WaitForConnect:		
			if (USB_INT_HasOccurred(USB_INT_DCONNI))
			{	
				USB_INT_Clear(USB_INT_DCONNI);
				USB_INT_Clear(USB_INT_DDISCI);

				USB_INT_Clear(USB_INT_VBERRI);
				USB_INT_Enable(USB_INT_VBERRI);
					
				USB_Host_ResumeBus();
				Pipe_ClearPipes();
				
				HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
			}

			break;
		case HOST_STATE_Powered_DoReset:
			USB_Host_ResetDevice();

			HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
			break;
		case HOST_STATE_Powered_ConfigPipe:
			Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
							   PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
							   PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE);		
		
			if (!(Pipe_IsConfigured()))
			{
				ErrorCode    = HOST_ENUMERROR_PipeConfigError;
				SubErrorCode = 0;
				break;
			}

			USB_HostState = HOST_STATE_Default;
			break;
		case HOST_STATE_Default:
			USB_ControlRequest = (USB_Request_Header_t)
				{
					.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
					.bRequest      = REQ_GetDescriptor,
					.wValue        = (DTYPE_Device << 8),
					.wIndex        = 0,
					.wLength       = 8,
				};

			uint8_t DataBuffer[8];

			if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
			{
				ErrorCode = HOST_ENUMERROR_ControlError;
				break;
			}

			USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
	
			USB_Host_ResetDevice();
			
			HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
			break;
		case HOST_STATE_Default_PostReset:
			Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
			                   PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
			                   USB_ControlPipeSize, PIPE_BANK_SINGLE);

			if (!(Pipe_IsConfigured()))
			{
				ErrorCode    = HOST_ENUMERROR_PipeConfigError;
				SubErrorCode = 0;
				break;
			}

			USB_ControlRequest = (USB_Request_Header_t)
				{
					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
					.bRequest      = REQ_SetAddress,
					.wValue        = USB_HOST_DEVICEADDRESS,
					.wIndex        = 0,
					.wLength       = 0,
				};

			if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
			{
				ErrorCode = HOST_ENUMERROR_ControlError;
				break;
			}

			HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
			break;
		case HOST_STATE_Default_PostAddressSet:
			USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);

			EVENT_USB_Host_DeviceEnumerationComplete();
			USB_HostState = HOST_STATE_Addressed;
			break;
	}

	if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
	{
		EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode);

		USB_Host_VBUS_Auto_Off();

		EVENT_USB_Host_DeviceUnattached();

		USB_ResetInterface();
	}
}

uint8_t USB_Host_WaitMS(uint8_t MS)
{
	bool    BusSuspended = USB_Host_IsBusSuspended();
	uint8_t ErrorCode    = HOST_WAITERROR_Successful;
	bool    HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
	
	USB_INT_Disable(USB_INT_HSOFI);
	USB_INT_Clear(USB_INT_HSOFI);

	USB_Host_ResumeBus();

	while (MS)
	{
		if (USB_INT_HasOccurred(USB_INT_HSOFI))
		{
			USB_INT_Clear(USB_INT_HSOFI);
			MS--;
		}
					
		if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host))
		{
			ErrorCode = HOST_WAITERROR_DeviceDisconnect;
			
			break;
		}

		if (Pipe_IsError() == true)
		{
			Pipe_ClearError();
			ErrorCode = HOST_WAITERROR_PipeError;
			
			break;
		}
		
		if (Pipe_IsStalled() == true)
		{
			Pipe_ClearStall();
			ErrorCode = HOST_WAITERROR_SetupStalled;
			
			break;			
		}
	}

	if (BusSuspended)
	  USB_Host_SuspendBus();

	if (HSOFIEnabled)
	  USB_INT_Enable(USB_INT_HSOFI);

	return ErrorCode;
}

static void USB_Host_ResetDevice(void)
{
	bool BusSuspended = USB_Host_IsBusSuspended();

	USB_INT_Disable(USB_INT_DDISCI);
	
	USB_Host_ResetBus();
	while (!(USB_Host_IsBusResetComplete()));
	USB_Host_ResumeBus();

	bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);

	USB_INT_Disable(USB_INT_HSOFI);
	USB_INT_Clear(USB_INT_HSOFI);
	
	for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
	{
		/* Workaround for powerless-pull-up devices. After a USB bus reset,
		   all disconnection interrupts are suppressed while a USB frame is
		   looked for - if it is found within 10ms, the device is still
		   present.                                                        */

		if (USB_INT_HasOccurred(USB_INT_HSOFI))
		{
			USB_INT_Clear(USB_INT_HSOFI);
			USB_INT_Clear(USB_INT_DDISCI);
			break;
		}
		
		_delay_ms(1);
	}

	if (HSOFIEnabled)
	  USB_INT_Enable(USB_INT_HSOFI);

	if (BusSuspended)
	  USB_Host_SuspendBus();

	USB_INT_Enable(USB_INT_DDISCI);
}