Esempio n. 1
0
int main(int argCount, const char** argv)
{
    int argNb,
        bench=0,
        decode=0,
        testmode=0,
        forceStdout=0,
        main_pause=0,
        nextEntryIsDictionary=0,
        operationResult=0,
        dictBuild=0,
        nextArgumentIsOutFileName=0,
        nextArgumentIsMaxDict=0,
        nextArgumentIsDictID=0,
        nextArgumentIsFile=0;
    int cLevel = ZSTDCLI_CLEVEL_DEFAULT;
    int cLevelLast = 1;
    unsigned recursive = 0;
    const char** filenameTable = (const char**)malloc(argCount * sizeof(const char*));   /* argCount >= 1 */
    unsigned filenameIdx = 0;
    const char* programName = argv[0];
    const char* outFileName = NULL;
    const char* dictFileName = NULL;
    char* dynNameSpace = NULL;
    unsigned maxDictSize = g_defaultMaxDictSize;
    unsigned dictID = 0;
    int dictCLevel = g_defaultDictCLevel;
    unsigned dictSelect = g_defaultSelectivityLevel;
#ifdef UTIL_HAS_CREATEFILELIST
    const char** fileNamesTable = NULL;
    char* fileNamesBuf = NULL;
    unsigned fileNamesNb;
#endif

    /* init */
    (void)recursive; (void)cLevelLast;    /* not used when ZSTD_NOBENCH set */
    (void)dictCLevel; (void)dictSelect; (void)dictID;  /* not used when ZSTD_NODICT set */
    (void)decode; (void)cLevel; /* not used when ZSTD_NOCOMPRESS set */
    if (filenameTable==NULL) { DISPLAY("zstd: %s \n", strerror(errno)); exit(1); }
    filenameTable[0] = stdinmark;
    displayOut = stderr;
    /* Pick out program name from path. Don't rely on stdlib because of conflicting behavior */
    {   size_t pos;
        for (pos = (int)strlen(programName); pos > 0; pos--) { if (programName[pos] == '/') { pos++; break; } }
        programName += pos;
    }

    /* preset behaviors */
    if (!strcmp(programName, ZSTD_UNZSTD)) decode=1;
    if (!strcmp(programName, ZSTD_CAT)) { decode=1; forceStdout=1; displayLevel=1; outFileName=stdoutmark; }

    /* command switches */
    for(argNb=1; argNb<argCount; argNb++) {
        const char* argument = argv[argNb];
        if(!argument) continue;   /* Protection if argument empty */

        if (nextArgumentIsFile==0) {

            /* long commands (--long-word) */
            if (!strcmp(argument, "--")) { nextArgumentIsFile=1; continue; }
            if (!strcmp(argument, "--decompress")) { decode=1; continue; }
            if (!strcmp(argument, "--force")) {  FIO_overwriteMode(); continue; }
            if (!strcmp(argument, "--version")) { displayOut=stdout; DISPLAY(WELCOME_MESSAGE); CLEAN_RETURN(0); }
            if (!strcmp(argument, "--help")) { displayOut=stdout; CLEAN_RETURN(usage_advanced(programName)); }
            if (!strcmp(argument, "--verbose")) { displayLevel++; continue; }
            if (!strcmp(argument, "--quiet")) { displayLevel--; continue; }
            if (!strcmp(argument, "--stdout")) { forceStdout=1; outFileName=stdoutmark; displayLevel-=(displayLevel==2); continue; }
            if (!strcmp(argument, "--ultra")) { FIO_setMaxWLog(0); continue; }
            if (!strcmp(argument, "--check")) { FIO_setChecksumFlag(2); continue; }
            if (!strcmp(argument, "--no-check")) { FIO_setChecksumFlag(0); continue; }
            if (!strcmp(argument, "--no-dictID")) { FIO_setDictIDFlag(0); continue; }
            if (!strcmp(argument, "--sparse")) { FIO_setSparseWrite(2); continue; }
            if (!strcmp(argument, "--no-sparse")) { FIO_setSparseWrite(0); continue; }
            if (!strcmp(argument, "--test")) { testmode=1; decode=1; continue; }
            if (!strcmp(argument, "--train")) { dictBuild=1; outFileName=g_defaultDictName; continue; }
            if (!strcmp(argument, "--maxdict")) { nextArgumentIsMaxDict=1; continue; }
            if (!strcmp(argument, "--dictID")) { nextArgumentIsDictID=1; continue; }
            if (!strcmp(argument, "--keep")) { FIO_setRemoveSrcFile(0); continue; }
            if (!strcmp(argument, "--rm")) { FIO_setRemoveSrcFile(1); continue; }

            /* '-' means stdin/stdout */
            if (!strcmp(argument, "-")){
                if (!filenameIdx) {
                    filenameIdx=1, filenameTable[0]=stdinmark;
                    outFileName=stdoutmark;
                    displayLevel-=(displayLevel==2);
                    continue;
            }   }

            /* Decode commands (note : aggregated commands are allowed) */
            if (argument[0]=='-') {
                argument++;

                while (argument[0]!=0) {
    #ifndef ZSTD_NOCOMPRESS
                    /* compression Level */
                    if ((*argument>='0') && (*argument<='9')) {
                        cLevel = readU32FromChar(&argument);
                        dictCLevel = cLevel;
                        if (dictCLevel > ZSTD_maxCLevel())
                            CLEAN_RETURN(badusage(programName));
                        continue;
                    }
    #endif

                    switch(argument[0])
                    {
                        /* Display help */
                    case 'V': displayOut=stdout; DISPLAY(WELCOME_MESSAGE); CLEAN_RETURN(0);   /* Version Only */
                    case 'H':
                    case 'h': displayOut=stdout; CLEAN_RETURN(usage_advanced(programName));

                         /* Decoding */
                    case 'd': decode=1; argument++; break;

                        /* Force stdout, even if stdout==console */
                    case 'c': forceStdout=1; outFileName=stdoutmark; displayLevel-=(displayLevel==2); argument++; break;

                        /* Use file content as dictionary */
                    case 'D': nextEntryIsDictionary = 1; argument++; break;

                        /* Overwrite */
                    case 'f': FIO_overwriteMode(); forceStdout=1; argument++; break;

                        /* Verbose mode */
                    case 'v': displayLevel++; argument++; break;

                        /* Quiet mode */
                    case 'q': displayLevel--; argument++; break;

                        /* keep source file (default); for gzip/xz compatibility */
                    case 'k': FIO_setRemoveSrcFile(0); argument++; break;

                        /* Checksum */
                    case 'C': argument++; FIO_setChecksumFlag(2); break;

                        /* test compressed file */
                    case 't': testmode=1; decode=1; argument++; break;

                        /* destination file name */
                    case 'o': nextArgumentIsOutFileName=1; argument++; break;

                        /* recursive */
                    case 'r': recursive=1; argument++; break;

    #ifndef ZSTD_NOBENCH
                        /* Benchmark */
                    case 'b': bench=1; argument++; break;

                        /* range bench (benchmark only) */
                    case 'e':
                            /* compression Level */
                            argument++;
                            cLevelLast = readU32FromChar(&argument);
                            break;

                        /* Modify Nb Iterations (benchmark only) */
                    case 'i':
                        argument++;
                        {   U32 const iters = readU32FromChar(&argument);
                            BMK_setNotificationLevel(displayLevel);
                            BMK_SetNbIterations(iters);
                        }
                        break;

                        /* cut input into blocks (benchmark only) */
                    case 'B':
                        argument++;
                        {   size_t bSize = readU32FromChar(&argument);
                            if (toupper(*argument)=='K') bSize<<=10, argument++;  /* allows using KB notation */
                            if (toupper(*argument)=='M') bSize<<=20, argument++;
                            if (toupper(*argument)=='B') argument++;
                            BMK_setNotificationLevel(displayLevel);
                            BMK_SetBlockSize(bSize);
                        }
                        break;
    #endif   /* ZSTD_NOBENCH */

                        /* Dictionary Selection level */
                    case 's':
                        argument++;
                        dictSelect = readU32FromChar(&argument);
                        break;

                        /* Pause at the end (-p) or set an additional param (-p#) (hidden option) */
                    case 'p': argument++;
    #ifndef ZSTD_NOBENCH
                        if ((*argument>='0') && (*argument<='9')) {
                            BMK_setAdditionalParam(readU32FromChar(&argument));
                        } else
    #endif
                            main_pause=1;
                        break;
                        /* unknown command */
                    default : CLEAN_RETURN(badusage(programName));
                    }
                }
                continue;
            }   /* if (argument[0]=='-') */

            if (nextArgumentIsMaxDict) {
                nextArgumentIsMaxDict = 0;
                maxDictSize = readU32FromChar(&argument);
                if (toupper(*argument)=='K') maxDictSize <<= 10;
                if (toupper(*argument)=='M') maxDictSize <<= 20;
                continue;
            }

            if (nextArgumentIsDictID) {
                nextArgumentIsDictID = 0;
                dictID = readU32FromChar(&argument);
                continue;
            }

        }   /* if (nextArgumentIsAFile==0) */

        if (nextEntryIsDictionary) {
            nextEntryIsDictionary = 0;
            dictFileName = argument;
            continue;
        }

        if (nextArgumentIsOutFileName) {
            nextArgumentIsOutFileName = 0;
            outFileName = argument;
            if (!strcmp(outFileName, "-")) outFileName = stdoutmark;
            continue;
        }

        /* add filename to list */
        filenameTable[filenameIdx++] = argument;
    }

    /* Welcome message (if verbose) */
    DISPLAYLEVEL(3, WELCOME_MESSAGE);

#ifdef UTIL_HAS_CREATEFILELIST
    if (recursive) {
        fileNamesTable = UTIL_createFileList(filenameTable, filenameIdx, &fileNamesBuf, &fileNamesNb);
        if (fileNamesTable) {
            unsigned i;
            for (i=0; i<fileNamesNb; i++) DISPLAYLEVEL(4, "%d %s\n", i, fileNamesTable[i]);
            free((void*)filenameTable);
            filenameTable = fileNamesTable;
            filenameIdx = fileNamesNb;
        }
    }
#endif

    /* Check if benchmark is selected */
    if (bench) {
#ifndef ZSTD_NOBENCH
        BMK_setNotificationLevel(displayLevel);
        BMK_benchFiles(filenameTable, filenameIdx, dictFileName, cLevel, cLevelLast);
#endif
        goto _end;
    }

    /* Check if dictionary builder is selected */
    if (dictBuild) {
#ifndef ZSTD_NODICT
        ZDICT_params_t dictParams;
        memset(&dictParams, 0, sizeof(dictParams));
        dictParams.compressionLevel = dictCLevel;
        dictParams.selectivityLevel = dictSelect;
        dictParams.notificationLevel = displayLevel;
        dictParams.dictID = dictID;
        DiB_trainFromFiles(outFileName, maxDictSize, filenameTable, filenameIdx, dictParams);
#endif
        goto _end;
    }

    /* No input filename ==> use stdin and stdout */
    filenameIdx += !filenameIdx;   /*< default input is stdin */
    if (!strcmp(filenameTable[0], stdinmark) && !outFileName) outFileName = stdoutmark;   /*< when input is stdin, default output is stdout */

    /* Check if input/output defined as console; trigger an error in this case */
    if (!strcmp(filenameTable[0], stdinmark) && IS_CONSOLE(stdin) ) CLEAN_RETURN(badusage(programName));
    if (outFileName && !strcmp(outFileName, stdoutmark) && IS_CONSOLE(stdout) && !(forceStdout && decode))
        CLEAN_RETURN(badusage(programName));

    /* user-selected output filename, only possible with a single file */
    if (outFileName && strcmp(outFileName,stdoutmark) && strcmp(outFileName,nulmark) && (filenameIdx>1)) {
        DISPLAY("Too many files (%u) on the command line. \n", filenameIdx);
        CLEAN_RETURN(filenameIdx);
    }

    /* No warning message in pipe mode (stdin + stdout) or multiple mode */
    if (!strcmp(filenameTable[0], stdinmark) && outFileName && !strcmp(outFileName,stdoutmark) && (displayLevel==2)) displayLevel=1;
    if ((filenameIdx>1) & (displayLevel==2)) displayLevel=1;

    /* IO Stream/File */
    FIO_setNotificationLevel(displayLevel);
#ifndef ZSTD_NOCOMPRESS
    if (!decode) {
        if (filenameIdx==1 && outFileName)
          operationResult = FIO_compressFilename(outFileName, filenameTable[0], dictFileName, cLevel);
        else
          operationResult = FIO_compressMultipleFilenames(filenameTable, filenameIdx, outFileName ? outFileName : ZSTD_EXTENSION, dictFileName, cLevel);
    } else
#endif
    {  /* decompression */
#ifndef ZSTD_NODECOMPRESS
        if (testmode) { outFileName=nulmark; FIO_setRemoveSrcFile(0); } /* test mode */
        if (filenameIdx==1 && outFileName)
            operationResult = FIO_decompressFilename(outFileName, filenameTable[0], dictFileName);
        else
            operationResult = FIO_decompressMultipleFilenames(filenameTable, filenameIdx, outFileName ? outFileName : ZSTD_EXTENSION, dictFileName);
#else
        DISPLAY("Decompression not supported\n");
#endif
    }

_end:
    if (main_pause) waitEnter();
    free(dynNameSpace);
#ifdef UTIL_HAS_CREATEFILELIST
    if (fileNamesTable)
        UTIL_freeFileList(fileNamesTable, fileNamesBuf);
    else
#endif
        free((void*)filenameTable);
    return operationResult;
}
Esempio n. 2
0
int main(int argCount, const char* argv[])
{
    int argNb,
        forceStdout=0,
        followLinks=0,
        main_pause=0,
        nextEntryIsDictionary=0,
        operationResult=0,
        nextArgumentIsOutFileName=0,
        nextArgumentIsMaxDict=0,
        nextArgumentIsDictID=0,
        nextArgumentsAreFiles=0,
        ultra=0,
        lastCommand = 0,
        nbThreads = 1,
        setRealTimePrio = 0,
        separateFiles = 0,
        ldmFlag = 0;
    unsigned bench_nbSeconds = 3;   /* would be better if this value was synchronized from bench */
    size_t blockSize = 0;
    zstd_operation_mode operation = zom_compress;
    ZSTD_compressionParameters compressionParams;
    int cLevel = ZSTDCLI_CLEVEL_DEFAULT;
    int cLevelLast = 1;
    unsigned recursive = 0;
    unsigned memLimit = 0;
    const char** filenameTable = (const char**)malloc(argCount * sizeof(const char*));   /* argCount >= 1 */
    unsigned filenameIdx = 0;
    const char* programName = argv[0];
    const char* outFileName = NULL;
    const char* dictFileName = NULL;
    const char* suffix = ZSTD_EXTENSION;
    unsigned maxDictSize = g_defaultMaxDictSize;
    unsigned dictID = 0;
    int dictCLevel = g_defaultDictCLevel;
    unsigned dictSelect = g_defaultSelectivityLevel;
#ifdef UTIL_HAS_CREATEFILELIST
    const char** extendedFileList = NULL;
    char* fileNamesBuf = NULL;
    unsigned fileNamesNb;
#endif
#ifndef ZSTD_NODICT
    ZDICT_cover_params_t coverParams = defaultCoverParams();
    int cover = 1;
#endif


    /* init */
    (void)recursive; (void)cLevelLast;    /* not used when ZSTD_NOBENCH set */
    (void)dictCLevel; (void)dictSelect; (void)dictID;  (void)maxDictSize; /* not used when ZSTD_NODICT set */
    (void)ultra; (void)cLevel; (void)ldmFlag; /* not used when ZSTD_NOCOMPRESS set */
    (void)memLimit;   /* not used when ZSTD_NODECOMPRESS set */
    if (filenameTable==NULL) { DISPLAY("zstd: %s \n", strerror(errno)); exit(1); }
    filenameTable[0] = stdinmark;
    g_displayOut = stderr;

    programName = lastNameFromPath(programName);

    /* preset behaviors */
    if (exeNameMatch(programName, ZSTD_ZSTDMT)) nbThreads=0;
    if (exeNameMatch(programName, ZSTD_UNZSTD)) operation=zom_decompress;
    if (exeNameMatch(programName, ZSTD_CAT)) { operation=zom_decompress; forceStdout=1; FIO_overwriteMode(); outFileName=stdoutmark; g_displayLevel=1; }
    if (exeNameMatch(programName, ZSTD_GZ)) { suffix = GZ_EXTENSION; FIO_setCompressionType(FIO_gzipCompression); FIO_setRemoveSrcFile(1); }    /* behave like gzip */
    if (exeNameMatch(programName, ZSTD_GUNZIP)) { operation=zom_decompress; FIO_setRemoveSrcFile(1); }                                          /* behave like gunzip */
    if (exeNameMatch(programName, ZSTD_GZCAT)) { operation=zom_decompress; forceStdout=1; FIO_overwriteMode(); outFileName=stdoutmark; g_displayLevel=1; }  /* behave like gzcat */
    if (exeNameMatch(programName, ZSTD_LZMA)) { suffix = LZMA_EXTENSION; FIO_setCompressionType(FIO_lzmaCompression); FIO_setRemoveSrcFile(1); }    /* behave like lzma */
    if (exeNameMatch(programName, ZSTD_UNLZMA)) { operation=zom_decompress; FIO_setCompressionType(FIO_lzmaCompression); FIO_setRemoveSrcFile(1); }    /* behave like unlzma */
    if (exeNameMatch(programName, ZSTD_XZ)) { suffix = XZ_EXTENSION; FIO_setCompressionType(FIO_xzCompression); FIO_setRemoveSrcFile(1); }    /* behave like xz */
    if (exeNameMatch(programName, ZSTD_UNXZ)) { operation=zom_decompress; FIO_setCompressionType(FIO_xzCompression); FIO_setRemoveSrcFile(1); }    /* behave like unxz */
    if (exeNameMatch(programName, ZSTD_LZ4)) { suffix = LZ4_EXTENSION; FIO_setCompressionType(FIO_lz4Compression); FIO_setRemoveSrcFile(1); }    /* behave like xz */
    if (exeNameMatch(programName, ZSTD_UNLZ4)) { operation=zom_decompress; FIO_setCompressionType(FIO_lz4Compression); FIO_setRemoveSrcFile(1); }    /* behave like unxz */
    memset(&compressionParams, 0, sizeof(compressionParams));

    /* command switches */
    for (argNb=1; argNb<argCount; argNb++) {
        const char* argument = argv[argNb];
        if(!argument) continue;   /* Protection if argument empty */

        if (nextArgumentsAreFiles==0) {
            /* "-" means stdin/stdout */
            if (!strcmp(argument, "-")){
                if (!filenameIdx) {
                    filenameIdx=1, filenameTable[0]=stdinmark;
                    outFileName=stdoutmark;
                    g_displayLevel-=(g_displayLevel==2);
                    continue;
            }   }

            /* Decode commands (note : aggregated commands are allowed) */
            if (argument[0]=='-') {

                if (argument[1]=='-') {
                    /* long commands (--long-word) */
                    if (!strcmp(argument, "--")) { nextArgumentsAreFiles=1; continue; }   /* only file names allowed from now on */
                    if (!strcmp(argument, "--list")) { operation=zom_list; continue; }
                    if (!strcmp(argument, "--compress")) { operation=zom_compress; continue; }
                    if (!strcmp(argument, "--decompress")) { operation=zom_decompress; continue; }
                    if (!strcmp(argument, "--uncompress")) { operation=zom_decompress; continue; }
                    if (!strcmp(argument, "--force")) { FIO_overwriteMode(); forceStdout=1; followLinks=1; continue; }
                    if (!strcmp(argument, "--version")) { g_displayOut=stdout; DISPLAY(WELCOME_MESSAGE); CLEAN_RETURN(0); }
                    if (!strcmp(argument, "--help")) { g_displayOut=stdout; CLEAN_RETURN(usage_advanced(programName)); }
                    if (!strcmp(argument, "--verbose")) { g_displayLevel++; continue; }
                    if (!strcmp(argument, "--quiet")) { g_displayLevel--; continue; }
                    if (!strcmp(argument, "--stdout")) { forceStdout=1; outFileName=stdoutmark; g_displayLevel-=(g_displayLevel==2); continue; }
                    if (!strcmp(argument, "--ultra")) { ultra=1; continue; }
                    if (!strcmp(argument, "--check")) { FIO_setChecksumFlag(2); continue; }
                    if (!strcmp(argument, "--no-check")) { FIO_setChecksumFlag(0); continue; }
                    if (!strcmp(argument, "--sparse")) { FIO_setSparseWrite(2); continue; }
                    if (!strcmp(argument, "--no-sparse")) { FIO_setSparseWrite(0); continue; }
                    if (!strcmp(argument, "--test")) { operation=zom_test; continue; }
                    if (!strcmp(argument, "--train")) { operation=zom_train; outFileName=g_defaultDictName; continue; }
                    if (!strcmp(argument, "--maxdict")) { nextArgumentIsMaxDict=1; lastCommand=1; continue; }  /* kept available for compatibility with old syntax ; will be removed one day */
                    if (!strcmp(argument, "--dictID")) { nextArgumentIsDictID=1; lastCommand=1; continue; }  /* kept available for compatibility with old syntax ; will be removed one day */
                    if (!strcmp(argument, "--no-dictID")) { FIO_setDictIDFlag(0); continue; }
                    if (!strcmp(argument, "--keep")) { FIO_setRemoveSrcFile(0); continue; }
                    if (!strcmp(argument, "--rm")) { FIO_setRemoveSrcFile(1); continue; }
                    if (!strcmp(argument, "--priority=rt")) { setRealTimePrio = 1; continue; }
#ifdef ZSTD_GZCOMPRESS
                    if (!strcmp(argument, "--format=gzip")) { suffix = GZ_EXTENSION; FIO_setCompressionType(FIO_gzipCompression); continue; }
#endif
#ifdef ZSTD_LZMACOMPRESS
                    if (!strcmp(argument, "--format=lzma")) { suffix = LZMA_EXTENSION; FIO_setCompressionType(FIO_lzmaCompression);  continue; }
                    if (!strcmp(argument, "--format=xz")) { suffix = XZ_EXTENSION; FIO_setCompressionType(FIO_xzCompression);  continue; }
#endif
#ifdef ZSTD_LZ4COMPRESS
                    if (!strcmp(argument, "--format=lz4")) { suffix = LZ4_EXTENSION; FIO_setCompressionType(FIO_lz4Compression);  continue; }
#endif

                    /* long commands with arguments */
#ifndef ZSTD_NODICT
                    if (longCommandWArg(&argument, "--train-cover")) {
                      operation = zom_train;
                      outFileName = g_defaultDictName;
                      cover = 1;
                      /* Allow optional arguments following an = */
                      if (*argument == 0) { memset(&coverParams, 0, sizeof(coverParams)); }
                      else if (*argument++ != '=') { CLEAN_RETURN(badusage(programName)); }
                      else if (!parseCoverParameters(argument, &coverParams)) { CLEAN_RETURN(badusage(programName)); }
                      continue;
                    }
                    if (longCommandWArg(&argument, "--train-legacy")) {
                      operation = zom_train;
                      outFileName = g_defaultDictName;
                      cover = 0;
                      /* Allow optional arguments following an = */
                      if (*argument == 0) { continue; }
                      else if (*argument++ != '=') { CLEAN_RETURN(badusage(programName)); }
                      else if (!parseLegacyParameters(argument, &dictSelect)) { CLEAN_RETURN(badusage(programName)); }
                      continue;
                    }
#endif
                    if (longCommandWArg(&argument, "--threads=")) { nbThreads = readU32FromChar(&argument); continue; }
                    if (longCommandWArg(&argument, "--memlimit=")) { memLimit = readU32FromChar(&argument); continue; }
                    if (longCommandWArg(&argument, "--memory=")) { memLimit = readU32FromChar(&argument); continue; }
                    if (longCommandWArg(&argument, "--memlimit-decompress=")) { memLimit = readU32FromChar(&argument); continue; }
                    if (longCommandWArg(&argument, "--block-size=")) { blockSize = readU32FromChar(&argument); continue; }
                    if (longCommandWArg(&argument, "--maxdict=")) { maxDictSize = readU32FromChar(&argument); continue; }
                    if (longCommandWArg(&argument, "--dictID=")) { dictID = readU32FromChar(&argument); continue; }
                    if (longCommandWArg(&argument, "--zstd=")) { if (!parseCompressionParameters(argument, &compressionParams)) CLEAN_RETURN(badusage(programName)); continue; }
                    if (longCommandWArg(&argument, "--long")) {
                        unsigned ldmWindowLog = 0;
                        ldmFlag = 1;
                        /* Parse optional window log */
                        if (*argument == '=') {
                            ++argument;
                            ldmWindowLog = readU32FromChar(&argument);
                        } else if (*argument != 0) {
                            /* Invalid character following --long */
                            CLEAN_RETURN(badusage(programName));
                        }
                        /* Only set windowLog if not already set by --zstd */
                        if (compressionParams.windowLog == 0)
                            compressionParams.windowLog = ldmWindowLog;
                        continue;
                    }
                    /* fall-through, will trigger bad_usage() later on */
                }

                argument++;
                while (argument[0]!=0) {
                    if (lastCommand) {
                        DISPLAY("error : command must be followed by argument \n");
                        CLEAN_RETURN(1);
                    }
#ifndef ZSTD_NOCOMPRESS
                    /* compression Level */
                    if ((*argument>='0') && (*argument<='9')) {
                        dictCLevel = cLevel = readU32FromChar(&argument);
                        continue;
                    }
#endif

                    switch(argument[0])
                    {
                        /* Display help */
                    case 'V': g_displayOut=stdout; printVersion(); CLEAN_RETURN(0);   /* Version Only */
                    case 'H':
                    case 'h': g_displayOut=stdout; CLEAN_RETURN(usage_advanced(programName));

                         /* Compress */
                    case 'z': operation=zom_compress; argument++; break;

                         /* Decoding */
                    case 'd':
#ifndef ZSTD_NOBENCH
                            if (operation==zom_bench) { BMK_setDecodeOnlyMode(1); argument++; break; }  /* benchmark decode (hidden option) */
#endif
                            operation=zom_decompress; argument++; break;

                        /* Force stdout, even if stdout==console */
                    case 'c': forceStdout=1; outFileName=stdoutmark; argument++; break;

                        /* Use file content as dictionary */
                    case 'D': nextEntryIsDictionary = 1; lastCommand = 1; argument++; break;

                        /* Overwrite */
                    case 'f': FIO_overwriteMode(); forceStdout=1; followLinks=1; argument++; break;

                        /* Verbose mode */
                    case 'v': g_displayLevel++; argument++; break;

                        /* Quiet mode */
                    case 'q': g_displayLevel--; argument++; break;

                        /* keep source file (default) */
                    case 'k': FIO_setRemoveSrcFile(0); argument++; break;

                        /* Checksum */
                    case 'C': FIO_setChecksumFlag(2); argument++; break;

                        /* test compressed file */
                    case 't': operation=zom_test; argument++; break;

                        /* destination file name */
                    case 'o': nextArgumentIsOutFileName=1; lastCommand=1; argument++; break;

                        /* limit decompression memory */
                    case 'M':
                        argument++;
                        memLimit = readU32FromChar(&argument);
                        break;
                    case 'l': operation=zom_list; argument++; break;
#ifdef UTIL_HAS_CREATEFILELIST
                        /* recursive */
                    case 'r': recursive=1; argument++; break;
#endif

#ifndef ZSTD_NOBENCH
                        /* Benchmark */
                    case 'b':
                        operation=zom_bench;
                        argument++;
                        break;

                        /* range bench (benchmark only) */
                    case 'e':
                        /* compression Level */
                        argument++;
                        cLevelLast = readU32FromChar(&argument);
                        break;

                        /* Modify Nb Iterations (benchmark only) */
                    case 'i':
                        argument++;
                        bench_nbSeconds = readU32FromChar(&argument);
                        break;

                        /* cut input into blocks (benchmark only) */
                    case 'B':
                        argument++;
                        blockSize = readU32FromChar(&argument);
                        break;

                        /* benchmark files separately (hidden option) */
                    case 'S':
                        argument++;
                        separateFiles = 1;
                        break;

#endif   /* ZSTD_NOBENCH */

                        /* nb of threads (hidden option) */
                    case 'T':
                        argument++;
                        nbThreads = readU32FromChar(&argument);
                        break;

                        /* Dictionary Selection level */
                    case 's':
                        argument++;
                        dictSelect = readU32FromChar(&argument);
                        break;

                        /* Pause at the end (-p) or set an additional param (-p#) (hidden option) */
                    case 'p': argument++;
#ifndef ZSTD_NOBENCH
                        if ((*argument>='0') && (*argument<='9')) {
                            BMK_setAdditionalParam(readU32FromChar(&argument));
                        } else
#endif
                            main_pause=1;
                        break;
                        /* unknown command */
                    default : CLEAN_RETURN(badusage(programName));
                    }
                }
                continue;
            }   /* if (argument[0]=='-') */

            if (nextArgumentIsMaxDict) {  /* kept available for compatibility with old syntax ; will be removed one day */
                nextArgumentIsMaxDict = 0;
                lastCommand = 0;
                maxDictSize = readU32FromChar(&argument);
                continue;
            }

            if (nextArgumentIsDictID) {  /* kept available for compatibility with old syntax ; will be removed one day */
                nextArgumentIsDictID = 0;
                lastCommand = 0;
                dictID = readU32FromChar(&argument);
                continue;
            }

        }   /* if (nextArgumentIsAFile==0) */

        if (nextEntryIsDictionary) {
            nextEntryIsDictionary = 0;
            lastCommand = 0;
            dictFileName = argument;
            continue;
        }

        if (nextArgumentIsOutFileName) {
            nextArgumentIsOutFileName = 0;
            lastCommand = 0;
            outFileName = argument;
            if (!strcmp(outFileName, "-")) outFileName = stdoutmark;
            continue;
        }

        /* add filename to list */
        filenameTable[filenameIdx++] = argument;
    }

    if (lastCommand) { /* forgotten argument */
        DISPLAY("error : command must be followed by argument \n");
        CLEAN_RETURN(1);
    }

    /* Welcome message (if verbose) */
    DISPLAYLEVEL(3, WELCOME_MESSAGE);

    if (nbThreads == 0) {
        /* try to guess */
        nbThreads = UTIL_countPhysicalCores();
        DISPLAYLEVEL(3, "Note: %d physical core(s) detected \n", nbThreads);
    }

    g_utilDisplayLevel = g_displayLevel;
    if (!followLinks) {
        unsigned u;
        for (u=0, fileNamesNb=0; u<filenameIdx; u++) {
            if (UTIL_isLink(filenameTable[u])) {
                DISPLAYLEVEL(2, "Warning : %s is a symbolic link, ignoring\n", filenameTable[u]);
            } else {
                filenameTable[fileNamesNb++] = filenameTable[u];
            }
        }
        filenameIdx = fileNamesNb;
    }
#ifdef UTIL_HAS_CREATEFILELIST
    if (recursive) {  /* at this stage, filenameTable is a list of paths, which can contain both files and directories */
        extendedFileList = UTIL_createFileList(filenameTable, filenameIdx, &fileNamesBuf, &fileNamesNb, followLinks);
        if (extendedFileList) {
            unsigned u;
            for (u=0; u<fileNamesNb; u++) DISPLAYLEVEL(4, "%u %s\n", u, extendedFileList[u]);
            free((void*)filenameTable);
            filenameTable = extendedFileList;
            filenameIdx = fileNamesNb;
        }
    }
#endif

    if (operation == zom_list) {
#ifndef ZSTD_NODECOMPRESS
        int const ret = FIO_listMultipleFiles(filenameIdx, filenameTable, g_displayLevel);
        CLEAN_RETURN(ret);
#else
        DISPLAY("file information is not supported \n");
        CLEAN_RETURN(1);
#endif
    }

    /* Check if benchmark is selected */
    if (operation==zom_bench) {
#ifndef ZSTD_NOBENCH
        BMK_setNotificationLevel(g_displayLevel);
        BMK_setSeparateFiles(separateFiles);
        BMK_setBlockSize(blockSize);
        BMK_setNbThreads(nbThreads);
        BMK_setRealTime(setRealTimePrio);
        BMK_setNbSeconds(bench_nbSeconds);
        BMK_setLdmFlag(ldmFlag);
        BMK_setLdmMinMatch(g_ldmMinMatch);
        BMK_setLdmHashLog(g_ldmHashLog);
        if (g_ldmBucketSizeLog != LDM_PARAM_DEFAULT) {
            BMK_setLdmBucketSizeLog(g_ldmBucketSizeLog);
        }
        if (g_ldmHashEveryLog != LDM_PARAM_DEFAULT) {
            BMK_setLdmHashEveryLog(g_ldmHashEveryLog);
        }
        BMK_benchFiles(filenameTable, filenameIdx, dictFileName, cLevel, cLevelLast, &compressionParams);
#else
        (void)bench_nbSeconds; (void)blockSize; (void)setRealTimePrio; (void)separateFiles;
#endif
        goto _end;
    }

    /* Check if dictionary builder is selected */
    if (operation==zom_train) {
#ifndef ZSTD_NODICT
        ZDICT_params_t zParams;
        zParams.compressionLevel = dictCLevel;
        zParams.notificationLevel = g_displayLevel;
        zParams.dictID = dictID;
        if (cover) {
            int const optimize = !coverParams.k || !coverParams.d;
            coverParams.nbThreads = nbThreads;
            coverParams.zParams = zParams;
            operationResult = DiB_trainFromFiles(outFileName, maxDictSize, filenameTable, filenameIdx, blockSize, NULL, &coverParams, optimize);
        } else {
            ZDICT_legacy_params_t dictParams;
            memset(&dictParams, 0, sizeof(dictParams));
            dictParams.selectivityLevel = dictSelect;
            dictParams.zParams = zParams;
            operationResult = DiB_trainFromFiles(outFileName, maxDictSize, filenameTable, filenameIdx, blockSize, &dictParams, NULL, 0);
        }
#endif
        goto _end;
    }

#ifndef ZSTD_NODECOMPRESS
    if (operation==zom_test) { outFileName=nulmark; FIO_setRemoveSrcFile(0); } /* test mode */
#endif

    /* No input filename ==> use stdin and stdout */
    filenameIdx += !filenameIdx;   /* filenameTable[0] is stdin by default */
    if (!strcmp(filenameTable[0], stdinmark) && !outFileName) outFileName = stdoutmark;   /* when input is stdin, default output is stdout */

    /* Check if input/output defined as console; trigger an error in this case */
    if (!strcmp(filenameTable[0], stdinmark) && IS_CONSOLE(stdin) ) CLEAN_RETURN(badusage(programName));
    if (outFileName && !strcmp(outFileName, stdoutmark) && IS_CONSOLE(stdout) && !strcmp(filenameTable[0], stdinmark) && !forceStdout && operation!=zom_decompress)
        CLEAN_RETURN(badusage(programName));

#ifndef ZSTD_NOCOMPRESS
    /* check compression level limits */
    {   int const maxCLevel = ultra ? ZSTD_maxCLevel() : ZSTDCLI_CLEVEL_MAX;
        if (cLevel > maxCLevel) {
            DISPLAYLEVEL(2, "Warning : compression level higher than max, reduced to %i \n", maxCLevel);
            cLevel = maxCLevel;
    }   }
#endif

    /* No status message in pipe mode (stdin - stdout) or multi-files mode */
    if (!strcmp(filenameTable[0], stdinmark) && outFileName && !strcmp(outFileName,stdoutmark) && (g_displayLevel==2)) g_displayLevel=1;
    if ((filenameIdx>1) & (g_displayLevel==2)) g_displayLevel=1;

    /* IO Stream/File */
    FIO_setNotificationLevel(g_displayLevel);
    if (operation==zom_compress) {
#ifndef ZSTD_NOCOMPRESS
        FIO_setNbThreads(nbThreads);
        FIO_setBlockSize((U32)blockSize);
        FIO_setLdmFlag(ldmFlag);
        FIO_setLdmHashLog(g_ldmHashLog);
        FIO_setLdmMinMatch(g_ldmMinMatch);
        if (g_ldmBucketSizeLog != LDM_PARAM_DEFAULT) {
            FIO_setLdmBucketSizeLog(g_ldmBucketSizeLog);
        }
        if (g_ldmHashEveryLog != LDM_PARAM_DEFAULT) {
            FIO_setLdmHashEveryLog(g_ldmHashEveryLog);
        }

        if (g_overlapLog!=OVERLAP_LOG_DEFAULT) FIO_setOverlapLog(g_overlapLog);
        if ((filenameIdx==1) && outFileName)
          operationResult = FIO_compressFilename(outFileName, filenameTable[0], dictFileName, cLevel, &compressionParams);
        else
          operationResult = FIO_compressMultipleFilenames(filenameTable, filenameIdx, outFileName, suffix, dictFileName, cLevel, &compressionParams);
#else
        (void)suffix;
        DISPLAY("Compression not supported\n");
#endif
    } else {  /* decompression or test */
#ifndef ZSTD_NODECOMPRESS
        if (memLimit == 0) {
            if (compressionParams.windowLog == 0)
                memLimit = (U32)1 << g_defaultMaxWindowLog;
            else {
                memLimit = (U32)1 << (compressionParams.windowLog & 31);
            }
        }
        FIO_setMemLimit(memLimit);
        if (filenameIdx==1 && outFileName)
            operationResult = FIO_decompressFilename(outFileName, filenameTable[0], dictFileName);
        else
            operationResult = FIO_decompressMultipleFilenames(filenameTable, filenameIdx, outFileName, dictFileName);
#else
        DISPLAY("Decompression not supported\n");
#endif
    }

_end:
    if (main_pause) waitEnter();
#ifdef UTIL_HAS_CREATEFILELIST
    if (extendedFileList)
        UTIL_freeFileList(extendedFileList, fileNamesBuf);
    else
#endif
        free((void*)filenameTable);
    return operationResult;
}
Esempio n. 3
0
Options::Status Options::parse(int argc, const char **argv) {
    bool test = false;
    bool recursive = false;
    bool ultra = false;
    bool forceStdout = false;
    // Local copy of input files, which are pointers into argv.
    std::vector<const char *> localInputFiles;
    for (int i = 1; i < argc; ++i) {
        const char *arg = argv[i];
        // Protect against empty arguments
        if (arg[0] == 0) {
            continue;
        }
        // Everything after "--" is an input file
        if (!std::strcmp(arg, "--")) {
            ++i;
            std::copy(argv + i, argv + argc, std::back_inserter(localInputFiles));
            break;
        }
        // Long arguments that don't have a short option
        {
            bool isLongOption = true;
            if (!std::strcmp(arg, "--rm")) {
                keepSource = false;
            } else if (!std::strcmp(arg, "--ultra")) {
                ultra = true;
                maxWindowLog = 0;
            } else if (!std::strcmp(arg, "--no-check")) {
                checksum = false;
            } else if (!std::strcmp(arg, "--sparse")) {
                writeMode = WriteMode::Sparse;
                notSupported("Sparse mode");
                return Status::Failure;
            } else if (!std::strcmp(arg, "--no-sparse")) {
                writeMode = WriteMode::Regular;
                notSupported("Sparse mode");
                return Status::Failure;
            } else if (!std::strcmp(arg, "--dictID")) {
                notSupported(arg);
                return Status::Failure;
            } else if (!std::strcmp(arg, "--no-dictID")) {
                notSupported(arg);
                return Status::Failure;
            } else {
                isLongOption = false;
            }
            if (isLongOption) {
                continue;
            }
        }
        // Arguments with a short option simply set their short option.
        const char *options = nullptr;
        if (!std::strcmp(arg, "--processes")) {
            options = "p";
        } else if (!std::strcmp(arg, "--version")) {
            options = "V";
        } else if (!std::strcmp(arg, "--help")) {
            options = "h";
        } else if (!std::strcmp(arg, "--decompress")) {
            options = "d";
        } else if (!std::strcmp(arg, "--force")) {
            options = "f";
        } else if (!std::strcmp(arg, "--stdout")) {
            options = "c";
        } else if (!std::strcmp(arg, "--keep")) {
            options = "k";
        } else if (!std::strcmp(arg, "--verbose")) {
            options = "v";
        } else if (!std::strcmp(arg, "--quiet")) {
            options = "q";
        } else if (!std::strcmp(arg, "--check")) {
            options = "C";
        } else if (!std::strcmp(arg, "--test")) {
            options = "t";
        } else if (arg[0] == '-' && arg[1] != 0) {
            options = arg + 1;
        } else {
            localInputFiles.emplace_back(arg);
            continue;
        }
        assert(options != nullptr);

        bool finished = false;
        while (!finished && *options != 0) {
            // Parse the compression level
            if (*options >= '0' && *options <= '9') {
                compressionLevel = parseUnsigned(&options);
                continue;
            }

            switch (*options) {
            case 'h':
            case 'H':
                usage();
                return Status::Message;
            case 'V':
                std::fprintf(stderr, "PZSTD version: %s.\n", ZSTD_VERSION_STRING);
                return Status::Message;
            case 'p': {
                finished = true;
                const char *optionArgument = getArgument(options, argv, i, argc);
                if (optionArgument == nullptr) {
                    return Status::Failure;
                }
                if (*optionArgument < '0' || *optionArgument > '9') {
                    std::fprintf(stderr, "Option -p expects a number, but %s provided\n",
                                 optionArgument);
                    return Status::Failure;
                }
                numThreads = parseUnsigned(&optionArgument);
                if (*optionArgument != 0) {
                    std::fprintf(stderr,
                                 "Option -p expects a number, but %u%s provided\n",
                                 numThreads, optionArgument);
                    return Status::Failure;
                }
                break;
            }
            case 'o': {
                finished = true;
                const char *optionArgument = getArgument(options, argv, i, argc);
                if (optionArgument == nullptr) {
                    return Status::Failure;
                }
                outputFile = optionArgument;
                break;
            }
            case 'C':
                checksum = true;
                break;
            case 'k':
                keepSource = true;
                break;
            case 'd':
                decompress = true;
                break;
            case 'f':
                overwrite = true;
                forceStdout = true;
                break;
            case 't':
                test = true;
                decompress = true;
                break;
#ifdef UTIL_HAS_CREATEFILELIST
            case 'r':
                recursive = true;
                break;
#endif
            case 'c':
                outputFile = kStdOut;
                forceStdout = true;
                break;
            case 'v':
                ++verbosity;
                break;
            case 'q':
                --verbosity;
                // Ignore them for now
                break;
            // Unsupported options from Zstd
            case 'D':
            case 's':
                notSupported("Zstd dictionaries.");
                return Status::Failure;
            case 'b':
            case 'e':
            case 'i':
            case 'B':
                notSupported("Zstd benchmarking options.");
                return Status::Failure;
            default:
                std::fprintf(stderr, "Invalid argument: %s\n", arg);
                return Status::Failure;
            }
            if (!finished) {
                ++options;
            }
        } // while (*options != 0);
    }   // for (int i = 1; i < argc; ++i);

    // Input file defaults to standard input if not provided.
    if (localInputFiles.empty()) {
        localInputFiles.emplace_back(kStdIn);
    }

    // Check validity of input files
    if (localInputFiles.size() > 1) {
        const auto it = std::find(localInputFiles.begin(), localInputFiles.end(),
                                  std::string{kStdIn});
        if (it != localInputFiles.end()) {
            std::fprintf(
                stderr,
                "Cannot specify standard input when handling multiple files\n");
            return Status::Failure;
        }
    }
    if (localInputFiles.size() > 1 || recursive) {
        if (!outputFile.empty() && outputFile != nullOutput) {
            std::fprintf(
                stderr,
                "Cannot specify an output file when handling multiple inputs\n");
            return Status::Failure;
        }
    }

    // Translate input files/directories into files to (de)compress
    if (recursive) {
        char *scratchBuffer = nullptr;
        unsigned numFiles = 0;
        const char **files =
            UTIL_createFileList(localInputFiles.data(), localInputFiles.size(),
                                &scratchBuffer, &numFiles);
        if (files == nullptr) {
            std::fprintf(stderr, "Error traversing directories\n");
            return Status::Failure;
        }
        auto guard =
            makeScopeGuard([&] { UTIL_freeFileList(files, scratchBuffer); });
        if (numFiles == 0) {
            std::fprintf(stderr, "No files found\n");
            return Status::Failure;
        }
        inputFiles.resize(numFiles);
        std::copy(files, files + numFiles, inputFiles.begin());
    } else {
        inputFiles.resize(localInputFiles.size());
        std::copy(localInputFiles.begin(), localInputFiles.end(),
                  inputFiles.begin());
    }
    localInputFiles.clear();
    assert(!inputFiles.empty());

    // If reading from standard input, default to standard output
    if (inputFiles[0] == kStdIn && outputFile.empty()) {
        assert(inputFiles.size() == 1);
        outputFile = "-";
    }

    if (inputFiles[0] == kStdIn && IS_CONSOLE(stdin)) {
        assert(inputFiles.size() == 1);
        std::fprintf(stderr, "Cannot read input from interactive console\n");
        return Status::Failure;
    }
    if (outputFile == "-" && IS_CONSOLE(stdout) && !(forceStdout && decompress)) {
        std::fprintf(stderr, "Will not write to console stdout unless -c or -f is "
                     "specified and decompressing\n");
        return Status::Failure;
    }

    // Check compression level
    {
        unsigned maxCLevel =
            ultra ? ZSTD_maxCLevel() : kMaxNonUltraCompressionLevel;
        if (compressionLevel > maxCLevel || compressionLevel == 0) {
            std::fprintf(stderr, "Invalid compression level %u.\n", compressionLevel);
            return Status::Failure;
        }
    }

    // Check that numThreads is set
    if (numThreads == 0) {
        std::fprintf(stderr, "Invalid arguments: # of threads not specified "
                     "and unable to determine hardware concurrency.\n");
        return Status::Failure;
    }

    // Modify verbosity
    // If we are piping input and output, turn off interaction
    if (inputFiles[0] == kStdIn && outputFile == kStdOut && verbosity == 2) {
        verbosity = 1;
    }
    // If we are in multi-file mode, turn off interaction
    if (inputFiles.size() > 1 && verbosity == 2) {
        verbosity = 1;
    }

    // Set options for test mode
    if (test) {
        outputFile = nullOutput;
        keepSource = true;
    }
    return Status::Success;
}