void VGA_ioport_out( WORD port, BYTE val )
{
switch (port) {
case 0x3c0:
if (vga_address_3c0)
vga_index_3c0 = val;
else
FIXME("Unsupported index, register 0x3c0: 0x%02x (value 0x%02x)\n",
vga_index_3c0, val);
vga_address_3c0 = !vga_address_3c0;
break;
case 0x3c4:
vga_index_3c4 = val;
break;
case 0x3c5:
switch(vga_index_3c4) {
case 0x04: /* Sequencer: Memory Mode Register */
if(vga_fb_depth == 8)
VGA_SetWindowStart((val & 8) ? 0 : -1);
else
FIXME("Memory Mode Register not supported in this mode.\n");
break;
default:
FIXME("Unsupported index, register 0x3c4: 0x%02x (value 0x%02x)\n",
vga_index_3c4, val);
}
break;
case 0x3c8:
palreg=val; palcnt=0; break;
case 0x3c9:
((BYTE*)&paldat)[palcnt++]=val << 2;
if (palcnt==3) {
VGA_SetPalette(&paldat,palreg++,1);
palcnt=0;
}
break;
case 0x3ce:
vga_index_3ce = val;
break;
case 0x3cf:
FIXME("Unsupported index, register 0x3ce: 0x%02x (value 0x%02x)\n",
vga_index_3ce, val);
break;
case 0x3d4:
vga_index_3d4 = val;
break;
case 0x3d5:
FIXME("Unsupported index, register 0x3d4: 0x%02x (value 0x%02x)\n",
vga_index_3d4, val);
break;
default:
FIXME("Unsupported VGA register: 0x%04x (value 0x%02x)\n", port, val);
}
}
/**********************************************************************
* DOSVM_Int10Handler
*
* Handler for int 10h (video).
*
* NOTE:
* Most INT 10 functions for text-mode, CGA, EGA, and VGA cards
* are present in this list. (SVGA and XGA are not) That is not
* to say that all these functions should be supported, but if
* anyone is brain-damaged enough to want to emulate one of these
* beasts then this should get you started.
*
* NOTE:
* Several common graphical extensions used by Microsoft hook
* off of here. I have *not* added them to this list (yet). They
* include:
*
* MSHERC.COM - More functionality for Hercules cards.
* EGA.SYS (also MOUSE.COM) - More for EGA cards.
*
* Yes, MS also added this support into their mouse driver. Don't
* ask me, I don't work for them.
*
* Joseph Pranevich - 9/98
*
* Jess Haas 2/99
* Added support for Vesa. It is not complete but is a start.
* NOTE: Im not sure if I did all this right or if any of it works.
* Currently I don't have a program that uses Vesa that actually gets far
* enough without crashing to do vesa stuff.
*
* Added additional vga graphic support - 3/99
*/
void WINAPI DOSVM_Int10Handler( CONTEXT *context )
{
BIOSDATA *data = DOSVM_BiosData();
INT10_InitializeVideoMode( data );
switch(AH_reg(context)) {
case 0x00: /* SET VIDEO MODE */
TRACE( "Set VGA video mode %02x\n", AL_reg(context) );
if (!INT10_SetVideoMode( data, AL_reg(context) ))
FIXME( "Unsupported VGA video mode requested: %#x\n",
AL_reg(context) );
break;
case 0x01: /* SET CURSOR SHAPE */
TRACE("Set Cursor Shape start %d end %d options %d\n",
CH_reg(context) & 0x1f,
CL_reg(context) & 0x1f,
CH_reg(context) & 0xe0);
data->VideoCursorType = CX_reg(context); /* direct copy */
VGA_SetCursorShape(CH_reg(context), CL_reg(context));
break;
case 0x02: /* SET CURSOR POSITION */
/* BH = Page Number */ /* Not supported */
/* DH = Row */ /* 0 is left */
/* DL = Column */ /* 0 is top */
INT10_SetCursorPos(data,BH_reg(context),DL_reg(context),DH_reg(context));
if (BH_reg(context))
{
FIXME("Set Cursor Position: Cannot set to page %d\n",
BH_reg(context));
}
else
{
VGA_SetCursorPos(DL_reg(context), DH_reg(context));
TRACE("Set Cursor Position: %d/%d\n", DL_reg(context),
DH_reg(context));
}
break;
case 0x03: /* GET CURSOR POSITION AND SIZE */
{
unsigned row, col;
TRACE("Get cursor position and size (page %d)\n", BH_reg(context));
SET_CX( context, data->VideoCursorType );
INT10_GetCursorPos(data,BH_reg(context),&col,&row);
SET_DH( context, row );
SET_DL( context, col );
TRACE("Cursor Position: %d/%d\n", DL_reg(context), DH_reg(context));
}
break;
case 0x04: /* READ LIGHT PEN POSITION */
FIXME("Read Light Pen Position - Not Supported\n");
SET_AH( context, 0x00 ); /* Not down */
break;
case 0x05: /* SELECT ACTIVE DISPLAY PAGE */
FIXME("Select Active Display Page (%d) - Not Supported\n", AL_reg(context));
data->VideoCurPage = AL_reg(context);
break;
case 0x06: /* SCROLL UP WINDOW */
/* AL = Lines to scroll */
/* BH = Attribute */
/* CH,CL = row, col upper-left */
/* DH,DL = row, col lower-right */
TRACE("Scroll Up Window %d\n", AL_reg(context));
if (AL_reg(context) == 0)
VGA_ClearText( CH_reg(context), CL_reg(context),
DH_reg(context), DL_reg(context),
BH_reg(context) );
else
VGA_ScrollUpText( CH_reg(context), CL_reg(context),
DH_reg(context), DL_reg(context),
AL_reg(context), BH_reg(context) );
break;
case 0x07: /* SCROLL DOWN WINDOW */
/* AL = Lines to scroll */
/* BH = Attribute */
/* CH,CL = row, col upper-left */
/* DH,DL = row, col lower-right */
TRACE("Scroll Down Window %d\n", AL_reg(context));
if (AL_reg(context) == 0)
VGA_ClearText( CH_reg(context), CL_reg(context),
DH_reg(context), DL_reg(context),
BH_reg(context) );
else
VGA_ScrollDownText( CH_reg(context), CL_reg(context),
DH_reg(context), DL_reg(context),
AL_reg(context), BH_reg(context) );
break;
case 0x08: /* READ CHARACTER AND ATTRIBUTE AT CURSOR POSITION */
{
if (BH_reg(context)) /* Write to different page */
{
FIXME("Read character and attribute at cursor position -"
" Can't read from non-0 page\n");
SET_AL( context, ' ' ); /* That page is blank */
SET_AH( context, 7 );
}
else
{
BYTE ascii, attr;
TRACE("Read Character and Attribute at Cursor Position\n");
VGA_GetCharacterAtCursor(&ascii, &attr);
SET_AL( context, ascii );
SET_AH( context, attr );
}
}
break;
case 0x09: /* WRITE CHARACTER AND ATTRIBUTE AT CURSOR POSITION */
case 0x0a: /* WRITE CHARACTER ONLY AT CURSOR POSITION */
/* AL = Character to display. */
/* BH = Page Number */ /* We can't write to non-0 pages, yet. */
/* BL = Attribute / Color */
/* CX = Times to Write Char */
/* Note here that the cursor is not advanced. */
{
unsigned row, col;
INT10_GetCursorPos(data,BH_reg(context),&col,&row);
VGA_WriteChars(col, row,
AL_reg(context),
(AH_reg(context) == 0x09) ? BL_reg(context) : -1,
CX_reg(context));
if (CX_reg(context) > 1)
TRACE("Write Character%s at Cursor Position (Rep. %d): %c\n",
(AH_reg(context) == 0x09) ? " and Attribute" : "",
CX_reg(context), AL_reg(context));
else
TRACE("Write Character%s at Cursor Position: %c\n",
(AH_reg(context) == 0x09) ? " and Attribute" : "",
AL_reg(context));
}
break;
case 0x0b:
switch BH_reg(context) {
case 0x00: /* SET BACKGROUND/BORDER COLOR */
/* In text modes, this sets only the border... */
/* According to the interrupt list and one of my books. */
/* Funny though that Beyond Zork seems to indicate that it
also sets up the default background attributes for clears
and scrolls... */
/* Bear in mind here that we do not want to change,
apparently, the foreground or attribute of the background
with this call, so we should check first to see what the
foreground already is... FIXME */
/* For CGA modes, background color change is the same as writing
to I/O address 0x3d9 bit 4 */
if(data->VideoMode >= 4 && data->VideoMode <= 6)
{
VGA_SetBright((BL_reg(context) & 0x10) != 0);
VGA_UpdatePalette();
}
else FIXME("Set Background/Border Color: %d/%d\n",
BH_reg(context), BL_reg(context));
break;
case 0x01: /* SET PALETTE */
/* For CGA modes, palette color change is the same as writing
to I/O address 0x3d9 bit 5 */
if(data->VideoMode >= 4 && data->VideoMode <= 6)
{
VGA_SetPaletteIndex(BL_reg(context) & 1);
VGA_UpdatePalette();
}
else FIXME("Set Palette - Not Supported: %02X\n", BL_reg(context));
break;
default:
FIXME("INT 10 AH = 0x0b BH = 0x%x - Unknown\n",
BH_reg(context));
break;
}
break;
case 0x0c: /* WRITE GRAPHICS PIXEL */
/* Only supported in CGA mode for now */
if(data->VideoMode >= 4 && data->VideoMode <= 6)
{
VGA_WritePixel(AL_reg(context), BH_reg(context), CX_reg(context), DX_reg(context));
}
else FIXME("Write pixel not implemented for current mode\n");
break;
case 0x0d: /* READ GRAPHICS PIXEL */
/* Not in graphics mode, can ignore w/o error */
FIXME("Read Graphics Pixel - Not Supported\n");
break;
case 0x0e: /* TELETYPE OUTPUT */
TRACE("Teletype Output\n");
DOSVM_PutChar(AL_reg(context));
break;
case 0x0f: /* GET CURRENT VIDEO MODE */
TRACE("Get current video mode: -> mode %d, columns %d\n", data->VideoMode, data->VideoColumns);
/* Note: This should not be a constant value. */
SET_AL( context, data->VideoMode );
SET_AH( context, data->VideoColumns );
SET_BH( context, 0 ); /* Display page 0 */
break;
case 0x10:
switch AL_reg(context) {
case 0x00: /* SET SINGLE PALETTE REGISTER - A.C. */
TRACE("Set Single Palette Register - Reg 0x0%x Value 0x0%x\n",
BL_reg(context),BH_reg(context));
/* BH is the value BL is the register */
VGA_SetColor16((int)BL_reg(context),(int)BH_reg(context));
break;
case 0x01: /* SET BORDER (OVERSCAN) */
/* Text terminals have no overscan */
/* I'm setting it anyway. - A.C. */
TRACE("Set Border (Overscan) - Ignored but set.\n");
VGA_SetColor16(16,(int)BH_reg(context));
break;
case 0x02: /* SET ALL PALETTE REGISTERS - A.C.*/
TRACE("Set all palette registers\n");
/* ES:DX points to a 17 byte table of colors */
/* No return data listed */
/* I'll have to update my table and the default palette */
VGA_Set16Palette(CTX_SEG_OFF_TO_LIN(context, context->SegEs, context->Edx));
break;
case 0x03: /* TOGGLE INTENSITY/BLINKING BIT */
FIXME("Toggle Intensity/Blinking Bit - Not Supported\n");
break;
case 0x07: /* GET INDIVIDUAL PALETTE REGISTER - A.C.*/
TRACE("Get Individual Palette Register 0x0%x\n",BL_reg(context));
/* BL is register to read [ 0-15 ] BH is return value */
SET_BH( context, VGA_GetColor16((int)BL_reg(context)) );
break;
case 0x08: /* READ OVERSCAN (BORDER COLOR) REGISTER - A.C. */
TRACE("Read Overscan (Border Color) Register\n");
SET_BH( context, VGA_GetColor16(16) );
break;
case 0x09: /* READ ALL PALETTE REGISTERS AND OVERSCAN REGISTER - A.C.*/
TRACE("Read All Palette Registers and Overscan Register\n");
/* ES:DX points to a 17 byte table where the results */
/* of this call should be stored. */
VGA_Get16Palette(CTX_SEG_OFF_TO_LIN(context, context->SegEs, context->Edx));
break;
case 0x10: /* SET INDIVIDUAL DAC REGISTER */
{
PALETTEENTRY paldat;
TRACE("Set Individual DAC register\n");
paldat.peRed = DH_reg(context);
paldat.peGreen = CH_reg(context);
paldat.peBlue = CL_reg(context);
paldat.peFlags = 0;
VGA_SetPalette(&paldat,BX_reg(context)&0xFF,1);
}
break;
case 0x12: /* SET BLOCK OF DAC REGISTERS */
{
int i;
PALETTEENTRY paldat;
BYTE *pt;
TRACE("Set Block of DAC registers\n");
pt = CTX_SEG_OFF_TO_LIN(context,context->SegEs,context->Edx);
for (i=0;i<CX_reg(context);i++)
{
paldat.peRed = (*(pt+i*3+0)) << 2;
paldat.peGreen = (*(pt+i*3+1)) << 2;
paldat.peBlue = (*(pt+i*3+2)) << 2;
paldat.peFlags = 0;
VGA_SetPalette(&paldat,(BX_reg(context)+i)&0xFF,1);
}
}
break;
case 0x13: /* SELECT VIDEO DAC COLOR PAGE */
FIXME("Select video DAC color page - Not Supported\n");
break;
case 0x15: /* READ INDIVIDUAL DAC REGISTER */
FIXME("Read individual DAC register - Not Supported\n");
break;
case 0x17: /* READ BLOCK OF DAC REGISTERS */
FIXME("Read block of DAC registers - Not Supported\n");
break;
case 0x18: /* SET PEL MASK */
FIXME("Set PEL mask - Not Supported\n");
break;
case 0x19: /* READ PEL MASK */
FIXME("Read PEL mask - Not Supported\n");
break;
case 0x1a: /* GET VIDEO DAC COLOR PAGE STATE */
FIXME("Get video DAC color page state - Not Supported\n");
break;
case 0x1b: /* PERFORM GRAY-SCALE SUMMING */
FIXME("Perform Gray-scale summing - Not Supported\n");
break;
default:
FIXME("INT 10 AH = 0x10 AL = 0x%x - Unknown\n",
AL_reg(context));
break;
}
break;
case 0x11: /* TEXT MODE CHARGEN */
/* Note that second subfunction is *almost* identical. */
/* See INTERRUPT.A for details. */
switch AL_reg(context) {
case 0x00: /* LOAD USER SPECIFIED PATTERNS */
case 0x10:
FIXME("Load User Specified Patterns - Not Supported\n");
break;
case 0x01: /* LOAD ROM MONOCHROME PATTERNS */
case 0x11:
FIXME("Load ROM Monochrome Patterns - Not Supported\n");
break;
case 0x02: /* LOAD ROM 8x8 DOUBLE-DOT PATTERNS */
case 0x12:
FIXME(
"Load ROM 8x8 Double Dot Patterns - Not Supported\n");
break;
case 0x03: /* SET BLOCK SPECIFIER */
FIXME("Set Block Specifier - Not Supported\n");
break;
case 0x04: /* LOAD ROM 8x16 CHARACTER SET */
case 0x14:
FIXME("Load ROM 8x16 Character Set - Not Supported\n");
break;
case 0x20: /* SET USER 8x16 GRAPHICS CHARS */
FIXME("Set User 8x16 Graphics Chars - Not Supported\n");
break;
case 0x21: /* SET USER GRAPICS CHARACTERS */
FIXME("Set User Graphics Characters - Not Supported\n");
break;
case 0x22: /* SET ROM 8x14 GRAPHICS CHARS */
FIXME("Set ROM 8x14 Graphics Chars - Not Supported\n");
break;
case 0x23: /* SET ROM 8x8 DBL DOT CHARS */
FIXME(
"Set ROM 8x8 Dbl Dot Chars (Graphics) - Not Supported\n");
break;
case 0x24: /* LOAD 8x16 GRAPHIC CHARS */
FIXME("Load 8x16 Graphic Chars - Not Supported\n");
break;
case 0x30: /* GET FONT INFORMATION */
FIXME("Get Font Information - Not Supported\n");
break;
default:
FIXME("INT 10 AH = 0x11 AL = 0x%x - Unknown\n",
AL_reg(context));
break;
}
break;
case 0x12: /* ALTERNATE FUNCTION SELECT */
switch BL_reg(context) {
case 0x10: /* GET EGA INFO */
TRACE("EGA info requested\n");
SET_BH( context, 0x00 ); /* Color screen */
SET_BL( context, data->ModeOptions >> 5 ); /* EGA memory size */
SET_CX( context, data->FeatureBitsSwitches );
break;
case 0x20: /* ALTERNATE PRTSC */
FIXME("Install Alternate Print Screen - Not Supported\n");
break;
case 0x30: /* SELECT VERTICAL RESOLUTION */
FIXME("Select vertical resolution - not supported\n");
break;
case 0x31: /* ENABLE/DISABLE DEFAULT PALETTE LOADING */
FIXME("Default palette loading - not supported\n");
data->VGASettings =
(data->VGASettings & 0xf7) |
((AL_reg(context) == 1) << 3);
break;
case 0x32: /* ENABLE/DISABLE VIDEO ADDRESSING */
FIXME("Video Addressing - Not Supported\n");
break;
case 0x33: /* ENABLE/DISABLE GRAY SCALE SUMMING */
FIXME("Gray Scale Summing - Not Supported\n");
break;
case 0x34: /* ENABLE/DISABLE CURSOR EMULATION */
TRACE("Set cursor emulation to %d\n", AL_reg(context));
data->ModeOptions =
(data->ModeOptions & 0xfe)|(AL_reg(context) == 1);
break;
case 0x36: /* VIDEO ADDRESS CONTROL */
FIXME("Video Address Control - Not Supported\n");
break;
default:
FIXME("INT 10 AH = 0x11 AL = 0x%x - Unknown\n",
AL_reg(context));
break;
}
break;
case 0x13: /* WRITE STRING */
/* This one does not imply that string be at cursor. */
FIXME("Write String - Not Supported\n");
break;
case 0x1a:
switch AL_reg(context) {
case 0x00: /* GET DISPLAY COMBINATION CODE */
TRACE("Get Display Combination Code\n");
SET_AL( context, 0x1a ); /* Function supported */
SET_BL( context, INT10_DCC ); /* Active display */
SET_BH( context, 0x00 ); /* No alternate display */
break;
case 0x01: /* SET DISPLAY COMBINATION CODE */
FIXME("Set Display Combination Code - Not Supported\n");
break;
default:
FIXME("INT 10 AH = 0x1a AL = 0x%x - Unknown\n",
AL_reg(context));
break;
}
break;
case 0x1b: /* FUNCTIONALITY/STATE INFORMATION */
TRACE("Get functionality/state information\n");
if (BX_reg(context) == 0x0000)
{
BYTE *ptr = CTX_SEG_OFF_TO_LIN(context,
context->SegEs,
context->Edi);
SET_AL( context, 0x1b ); /* Function is supported */
INT10_FillStateInformation( ptr, data );
}
break;
case 0x1c: /* SAVE/RESTORE VIDEO STATE */
FIXME("Save/Restore Video State - Not Supported\n");
break;
case 0xef: /* get video mode for hercules-compatibles */
/* There's no reason to really support this */
/* is there?....................(A.C.) */
TRACE("Just report the video not hercules compatible\n");
SET_DX( context, 0xffff );
break;
case 0x4f: /* VESA */
INT10_HandleVESA(context);
break;
case 0xfe: /* GET SHADOW BUFFER */
TRACE( "GET SHADOW BUFFER %x:%x - ignored\n",
context->SegEs, DI_reg(context) );
break;
default:
FIXME("Unknown - 0x%x\n", AH_reg(context));
INT_BARF( context, 0x10 );
}
}
