static int do_vbexport_test_key(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
int ret = 0;
uint32_t c = 0;
VbExDebug("Press any key for test. Press Ctrl-C to exit...\n");
while (c != KEY_CTRL_C) {
c = VbExKeyboardRead();
if (c)
VbExDebug("Key pressed: 0x%02x\n", c);
}
return ret;
}
VbError_t VbBootRecovery(VbCommonParams *cparams, LoadKernelParams *p)
{
VbSharedDataHeader *shared =
(VbSharedDataHeader *)cparams->shared_data_blob;
uint32_t retval;
uint32_t key;
int i;
VBDEBUG(("VbBootRecovery() start\n"));
/*
* If the dev-mode switch is off and the user didn't press the recovery
* button, require removal of all external media.
*/
if (!(shared->flags & VBSD_BOOT_DEV_SWITCH_ON) &&
!(shared->flags & VBSD_BOOT_REC_SWITCH_ON)) {
VbDiskInfo *disk_info = NULL;
uint32_t disk_count = 0;
VBDEBUG(("VbBootRecovery() forcing device removal\n"));
/* If no media is detected initially, delay and make one extra
* attempt, in case devices appear later than expected. */
if (VBERROR_SUCCESS != VbExDiskGetInfo(&disk_info, &disk_count,
VB_DISK_FLAG_REMOVABLE))
disk_count = 0;
VbExDiskFreeInfo(disk_info, NULL);
if (0 == disk_count)
VbExSleepMs(REC_MEDIA_INIT_DELAY);
while (1) {
disk_info = NULL;
disk_count = 0;
if (VBERROR_SUCCESS !=
VbExDiskGetInfo(&disk_info, &disk_count,
VB_DISK_FLAG_REMOVABLE))
disk_count = 0;
VbExDiskFreeInfo(disk_info, NULL);
if (0 == disk_count) {
VbDisplayScreen(cparams, VB_SCREEN_BLANK,
0, &vnc);
break;
}
VBDEBUG(("VbBootRecovery() "
"waiting for %d disks to be removed\n",
(int)disk_count));
VbDisplayScreen(cparams, VB_SCREEN_RECOVERY_REMOVE,
0, &vnc);
/*
* Scan keyboard more frequently than media, since x86
* platforms don't like to scan USB too rapidly.
*/
for (i = 0; i < REC_DISK_DELAY; i += REC_KEY_DELAY) {
VbCheckDisplayKey(cparams, VbExKeyboardRead(),
&vnc);
if (VbWantShutdown(cparams->gbb->flags))
return VBERROR_SHUTDOWN_REQUESTED;
VbExSleepMs(REC_KEY_DELAY);
}
}
}
/* Loop and wait for a recovery image */
while (1) {
VBDEBUG(("VbBootRecovery() attempting to load kernel2\n"));
retval = VbTryLoadKernel(cparams, p, VB_DISK_FLAG_REMOVABLE);
/*
* Clear recovery requests from failed kernel loading, since
* we're already in recovery mode. Do this now, so that
* powering off after inserting an invalid disk doesn't leave
* us stuck in recovery mode.
*/
VbSetRecoveryRequest(VBNV_RECOVERY_NOT_REQUESTED);
if (VBERROR_SUCCESS == retval)
break; /* Found a recovery kernel */
VbDisplayScreen(cparams, VBERROR_NO_DISK_FOUND == retval ?
VB_SCREEN_RECOVERY_INSERT :
VB_SCREEN_RECOVERY_NO_GOOD,
0, &vnc);
/*
* Scan keyboard more frequently than media, since x86
* platforms don't like to scan USB too rapidly.
*/
for (i = 0; i < REC_DISK_DELAY; i += REC_KEY_DELAY) {
key = VbExKeyboardRead();
/*
* We might want to enter dev-mode from the Insert
* screen if all of the following are true:
* - user pressed Ctrl-D
* - we can honor the virtual dev switch
* - not already in dev mode
* - user forced recovery mode
* - EC isn't pwned
*/
if (key == 0x04 &&
shared->flags & VBSD_HONOR_VIRT_DEV_SWITCH &&
!(shared->flags & VBSD_BOOT_DEV_SWITCH_ON) &&
(shared->flags & VBSD_BOOT_REC_SWITCH_ON) &&
VbExTrustEC(0)) {
if (!(shared->flags &
VBSD_BOOT_REC_SWITCH_VIRTUAL) &&
VbExGetSwitches(
VB_INIT_FLAG_REC_BUTTON_PRESSED)) {
/*
* Is the recovery button stuck? In
* any case we don't like this. Beep
* and ignore.
*/
VBDEBUG(("%s() - ^D but rec switch "
"is pressed\n", __func__));
VbExBeep(120, 400);
continue;
}
/* Ask the user to confirm entering dev-mode */
VbDisplayScreen(cparams,
VB_SCREEN_RECOVERY_TO_DEV,
0, &vnc);
/* SPACE means no... */
uint32_t vbc_flags =
VB_CONFIRM_SPACE_MEANS_NO |
VB_CONFIRM_MUST_TRUST_KEYBOARD;
switch (VbUserConfirms(cparams, vbc_flags)) {
case 1:
VBDEBUG(("%s() Enabling dev-mode...\n",
__func__));
if (TPM_SUCCESS != SetVirtualDevMode(1))
return VBERROR_TPM_SET_BOOT_MODE_STATE;
VBDEBUG(("%s() Reboot so it will take "
"effect\n", __func__));
if (VbExGetSwitches
(VB_INIT_FLAG_ALLOW_USB_BOOT))
VbAllowUsbBoot();
return VBERROR_TPM_REBOOT_REQUIRED;
case -1:
VBDEBUG(("%s() - Shutdown requested\n",
__func__));
return VBERROR_SHUTDOWN_REQUESTED;
default: /* zero, actually */
VBDEBUG(("%s() - Not enabling "
"dev-mode\n", __func__));
/*
* Jump out of the outer loop to
* refresh the display quickly.
*/
i = 4;
break;
}
} else {
VbCheckDisplayKey(cparams, key, &vnc);
}
if (VbWantShutdown(cparams->gbb->flags))
return VBERROR_SHUTDOWN_REQUESTED;
VbExSleepMs(REC_KEY_DELAY);
}
}
return VBERROR_SUCCESS;
}
VbError_t VbBootDeveloper(VbCommonParams *cparams, LoadKernelParams *p)
{
GoogleBinaryBlockHeader *gbb = cparams->gbb;
VbSharedDataHeader *shared =
(VbSharedDataHeader *)cparams->shared_data_blob;
uint32_t allow_usb = 0, allow_legacy = 0, ctrl_d_pressed = 0;
VbAudioContext *audio = 0;
VBDEBUG(("Entering %s()\n", __func__));
/* Check if USB booting is allowed */
VbNvGet(&vnc, VBNV_DEV_BOOT_USB, &allow_usb);
VbNvGet(&vnc, VBNV_DEV_BOOT_LEGACY, &allow_legacy);
/* Handle GBB flag override */
if (gbb->flags & GBB_FLAG_FORCE_DEV_BOOT_USB)
allow_usb = 1;
if (gbb->flags & GBB_FLAG_FORCE_DEV_BOOT_LEGACY)
allow_legacy = 1;
/* Show the dev mode warning screen */
VbDisplayScreen(cparams, VB_SCREEN_DEVELOPER_WARNING, 0, &vnc);
/* Get audio/delay context */
audio = VbAudioOpen(cparams);
/* We'll loop until we finish the delay or are interrupted */
do {
uint32_t key;
if (VbWantShutdown(gbb->flags)) {
VBDEBUG(("VbBootDeveloper() - shutdown requested!\n"));
VbAudioClose(audio);
return VBERROR_SHUTDOWN_REQUESTED;
}
key = VbExKeyboardRead();
switch (key) {
case 0:
/* nothing pressed */
break;
case '\r':
/* Only disable virtual dev switch if allowed by GBB */
if (!(gbb->flags & GBB_FLAG_ENTER_TRIGGERS_TONORM))
break;
case ' ':
/* See if we should disable virtual dev-mode switch. */
VBDEBUG(("%s shared->flags=0x%x\n",
__func__, shared->flags));
if (shared->flags & VBSD_HONOR_VIRT_DEV_SWITCH &&
shared->flags & VBSD_BOOT_DEV_SWITCH_ON) {
/* Stop the countdown while we go ask... */
VbAudioClose(audio);
if (gbb->flags & GBB_FLAG_FORCE_DEV_SWITCH_ON) {
/*
* TONORM won't work (only for
* non-shipping devices).
*/
VBDEBUG(("%s() - TONORM rejected by "
"FORCE_DEV_SWITCH_ON\n",
__func__));
VbExDisplayDebugInfo(
"WARNING: TONORM prohibited by "
"GBB FORCE_DEV_SWITCH_ON.\n\n");
VbExBeep(120, 400);
break;
}
VbDisplayScreen(cparams,
VB_SCREEN_DEVELOPER_TO_NORM,
0, &vnc);
/* Ignore space in VbUserConfirms()... */
switch (VbUserConfirms(cparams, 0)) {
case 1:
VBDEBUG(("%s() - leaving dev-mode.\n",
__func__));
VbNvSet(&vnc, VBNV_DISABLE_DEV_REQUEST,
1);
VbDisplayScreen(
cparams,
VB_SCREEN_TO_NORM_CONFIRMED,
0, &vnc);
VbExSleepMs(5000);
return VBERROR_TPM_REBOOT_REQUIRED;
case -1:
VBDEBUG(("%s() - shutdown requested\n",
__func__));
return VBERROR_SHUTDOWN_REQUESTED;
default:
/* Stay in dev-mode */
VBDEBUG(("%s() - stay in dev-mode\n",
__func__));
VbDisplayScreen(
cparams,
VB_SCREEN_DEVELOPER_WARNING,
0, &vnc);
/* Start new countdown */
audio = VbAudioOpen(cparams);
}
} else {
/*
* No virtual dev-mode switch, so go directly
* to recovery mode.
*/
VBDEBUG(("%s() - going to recovery\n",
__func__));
VbSetRecoveryRequest(
VBNV_RECOVERY_RW_DEV_SCREEN);
VbAudioClose(audio);
return VBERROR_LOAD_KERNEL_RECOVERY;
}
break;
case 0x04:
/* Ctrl+D = dismiss warning; advance to timeout */
VBDEBUG(("VbBootDeveloper() - "
"user pressed Ctrl+D; skip delay\n"));
ctrl_d_pressed = 1;
goto fallout;
break;
case 0x0c:
VBDEBUG(("VbBootDeveloper() - "
"user pressed Ctrl+L; Try legacy boot\n"));
VbTryLegacy(allow_legacy);
break;
case VB_KEY_CTRL_ENTER:
/*
* The Ctrl-Enter is special for Lumpy test purpose;
* fall through to Ctrl+U handler.
*/
case 0x15:
/* Ctrl+U = try USB boot, or beep if failure */
VBDEBUG(("VbBootDeveloper() - "
"user pressed Ctrl+U; try USB\n"));
if (!allow_usb) {
VBDEBUG(("VbBootDeveloper() - "
"USB booting is disabled\n"));
VbExDisplayDebugInfo(
"WARNING: Booting from external media "
"(USB/SD) has not been enabled. Refer "
"to the developer-mode documentation "
"for details.\n");
VbExBeep(120, 400);
VbExSleepMs(120);
VbExBeep(120, 400);
} else {
/*
* Clear the screen to show we get the Ctrl+U
* key press.
*/
VbDisplayScreen(cparams, VB_SCREEN_BLANK, 0,
&vnc);
if (VBERROR_SUCCESS ==
VbTryLoadKernel(cparams, p,
VB_DISK_FLAG_REMOVABLE)) {
VBDEBUG(("VbBootDeveloper() - "
"booting USB\n"));
VbAudioClose(audio);
return VBERROR_SUCCESS;
} else {
VBDEBUG(("VbBootDeveloper() - "
"no kernel found on USB\n"));
VbExBeep(250, 200);
VbExSleepMs(120);
/*
* Clear recovery requests from failed
* kernel loading, so that powering off
* at this point doesn't put us into
* recovery mode.
*/
VbSetRecoveryRequest(
VBNV_RECOVERY_NOT_REQUESTED);
/* Show dev mode warning screen again */
VbDisplayScreen(
cparams,
VB_SCREEN_DEVELOPER_WARNING,
0, &vnc);
}
}
break;
default:
VBDEBUG(("VbBootDeveloper() - pressed key %d\n", key));
VbCheckDisplayKey(cparams, key, &vnc);
break;
}
} while(VbAudioLooping(audio));
fallout:
/* If defaulting to legacy boot, try that unless Ctrl+D was pressed */
if ((gbb->flags & GBB_FLAG_DEFAULT_DEV_BOOT_LEGACY) &&
!ctrl_d_pressed) {
VBDEBUG(("VbBootDeveloper() - defaulting to legacy\n"));
VbTryLegacy(allow_legacy);
}
/* Timeout or Ctrl+D; attempt loading from fixed disk */
VBDEBUG(("VbBootDeveloper() - trying fixed disk\n"));
VbAudioClose(audio);
return VbTryLoadKernel(cparams, p, VB_DISK_FLAG_FIXED);
}
