/*!
\brief Writes point
Writes GV_POINT to Out at the position of the node in <em>In</em>.
\param In pointer to Map_info structure (input vector map)
\param[in,out] Out pointer to Map_info structure (output vector map)
\param node node id
\param Cats pointer to line_cats structures
*/
void NetA_add_point_on_node(struct Map_info *In, struct Map_info *Out,
int node, struct line_cats *Cats)
{
static struct line_pnts *Points;
double x, y, z;
Points = Vect_new_line_struct();
Vect_get_node_coor(In, node, &x, &y, &z);
Vect_reset_line(Points);
Vect_append_point(Points, x, y, z);
Vect_write_line(Out, GV_POINT, Points, Cats);
Vect_destroy_line_struct(Points);
}
void edit_line_phase2(struct edit_line *el, double x, double y)
{
int node1, node2;
double nodex, nodey, nodez, dist;
el->phase = 2;
el->Points = Vect_new_line_struct();
el->Cats = Vect_new_cats_struct();
el->line_type = Vect_read_line(&Map, el->Points, el->Cats, el->line);
el->reversed = 0;
/* Find out the node nearest to the line */
Vect_get_line_nodes(&Map, el->line, &node1, &node2);
Vect_get_node_coor(&Map, node2, &nodex, &nodey, &nodez);
dist = (x - nodex) * (x - nodex) + (y - nodey) * (y - nodey);
Vect_get_node_coor(&Map, node1, &nodex, &nodey, &nodez);
if ((x - nodex) * (x - nodex) + (y - nodey) * (y - nodey) < dist) {
/* The first node is the nearest => reverse the line and remember
* doing so. */
Vect_line_reverse(el->Points);
el->reversed = 1;
}
display_node(node1, SYMB_BACKGROUND, 1);
display_node(node2, SYMB_BACKGROUND, 1);
i_prompt_buttons(_("New Point"), _("Undo Last Point"), _("Close line"));
set_location(D_u_to_d_col(el->Points->x[el->Points->n_points - 1]),
D_u_to_d_row(el->Points->y[el->Points->n_points - 1])
);
set_mode(MOUSE_LINE);
}
/* Snap to node */
int snap(double *x, double *y)
{
int node;
double thresh;
G_debug(2, "snap(): x = %f, y = %f", *x, *y);
thresh = get_thresh();
node = Vect_find_node(&Map, *x, *y, 0, thresh, 0);
if (node > 0)
Vect_get_node_coor(&Map, node, x, y, NULL);
G_debug(2, "node = %d x = %f, y = %f", node, *x, *y);
return node;
}
/*!
\brief Draw line nodes
*/
void draw_line_nodes(struct Map_info *Map, int line, int draw_flag,
struct robject_list *list)
{
unsigned int i;
int type, nodes[2];
int x, y;
double east, north;
struct robject *robj;
Vect_get_line_nodes(Map, line, &(nodes[0]), &(nodes[1]));
for (i = 0; i < sizeof(nodes) / sizeof(int); i++) {
type = 0;
if (Vect_get_node_n_lines(Map, nodes[i]) == 1) {
if (draw_flag & DRAW_NODEONE) {
type = TYPE_NODEONE;
}
}
else {
if (draw_flag & DRAW_NODETWO) {
type = TYPE_NODETWO;
}
}
if (type == 0)
continue;
Vect_get_node_coor(Map, nodes[i], &east, &north, NULL);
robj = robj_alloc(type, 1);
en_to_xy(east, north, &x, &y);
robj->fid = line;
robj->point->x = x;
robj->point->y = y;
list_append(list, robj);
}
}
void QgsGrassFeatureIterator::setFeatureGeometry( QgsFeature& feature, int id, int type )
{
unsigned char *wkb;
int wkbsize;
// TODO int may be 64 bits (memcpy)
if ( type & ( GV_POINTS | GV_LINES | GV_FACE ) || mSource->mLayerType == QgsGrassProvider::TOPO_NODE ) /* points or lines */
{
if ( mSource->mLayerType == QgsGrassProvider::TOPO_NODE )
{
double x, y, z;
Vect_get_node_coor( mSource->mMap, id, &x, &y, &z );
Vect_reset_line( mPoints );
Vect_append_point( mPoints, x, y, z );
}
else
{
Vect_read_line( mSource->mMap, mPoints, 0, id );
}
int npoints = mPoints->n_points;
if ( mSource->mLayerType == QgsGrassProvider::TOPO_NODE )
{
wkbsize = 1 + 4 + 2 * 8;
}
else if ( type & GV_POINTS )
{
wkbsize = 1 + 4 + 2 * 8;
}
else if ( type & GV_LINES )
{
wkbsize = 1 + 4 + 4 + npoints * 2 * 8;
}
else // GV_FACE
{
wkbsize = 1 + 4 + 4 + 4 + npoints * 2 * 8;
}
wkb = new unsigned char[wkbsize];
unsigned char *wkbp = wkb;
wkbp[0] = ( unsigned char ) QgsApplication::endian();
wkbp += 1;
/* WKB type */
memcpy( wkbp, &mSource->mQgisType, 4 );
wkbp += 4;
/* Number of rings */
if ( type & GV_FACE )
{
int nrings = 1;
memcpy( wkbp, &nrings, 4 );
wkbp += 4;
}
/* number of points */
if ( type & ( GV_LINES | GV_FACE ) )
{
QgsDebugMsg( QString( "set npoints = %1" ).arg( npoints ) );
memcpy( wkbp, &npoints, 4 );
wkbp += 4;
}
for ( int i = 0; i < npoints; i++ )
{
memcpy( wkbp, &( mPoints->x[i] ), 8 );
memcpy( wkbp + 8, &( mPoints->y[i] ), 8 );
wkbp += 16;
}
}
else // GV_AREA
{
Vect_get_area_points( mSource->mMap, id, mPoints );
int npoints = mPoints->n_points;
wkbsize = 1 + 4 + 4 + 4 + npoints * 2 * 8; // size without islands
wkb = new unsigned char[wkbsize];
wkb[0] = ( unsigned char ) QgsApplication::endian();
int offset = 1;
/* WKB type */
memcpy( wkb + offset, &mSource->mQgisType, 4 );
offset += 4;
/* Number of rings */
int nisles = Vect_get_area_num_isles( mSource->mMap, id );
int nrings = 1 + nisles;
memcpy( wkb + offset, &nrings, 4 );
offset += 4;
/* Outer ring */
memcpy( wkb + offset, &npoints, 4 );
offset += 4;
for ( int i = 0; i < npoints; i++ )
{
memcpy( wkb + offset, &( mPoints->x[i] ), 8 );
memcpy( wkb + offset + 8, &( mPoints->y[i] ), 8 );
offset += 16;
}
/* Isles */
for ( int i = 0; i < nisles; i++ )
{
Vect_get_isle_points( mSource->mMap, Vect_get_area_isle( mSource->mMap, id, i ), mPoints );
npoints = mPoints->n_points;
// add space
wkbsize += 4 + npoints * 2 * 8;
wkb = ( unsigned char * ) realloc( wkb, wkbsize );
memcpy( wkb + offset, &npoints, 4 );
offset += 4;
for ( int i = 0; i < npoints; i++ )
{
memcpy( wkb + offset, &( mPoints->x[i] ), 8 );
memcpy( wkb + offset + 8, &( mPoints->y[i] ), 8 );
offset += 16;
}
}
}
feature.setGeometryAndOwnership( wkb, wkbsize );
}
int report(struct Map_info *In, int afield, int nfield, int action)
{
int i, j, k, line, ltype, nnodes;
int cat_line, cat_node[2];
struct line_cats *Cats, *Cats2;
int node;
double x, y, z;
Cats = Vect_new_cats_struct();
Cats2 = Vect_new_cats_struct();
if (action == TOOL_REPORT) {
/* For all lines find categories for points on nodes */
for (i = 1; i <= Vect_get_num_lines(In); i++) {
ltype = Vect_read_line(In, NULL, Cats, i);
if (ltype != GV_LINE)
continue;
cat_line = 0;
if (!Vect_cat_get(Cats, afield, &cat_line))
G_warning(_("Line %d has no category"), i);
cat_node[0] = cat_node[1] = 0;
for (j = 0; j < 2; j++) {
if (j == 0)
Vect_get_line_nodes(In, i, &node, NULL);
else
Vect_get_line_nodes(In, i, NULL, &node);
Vect_get_node_coor(In, node, &x, &y, &z);
nnodes = 0;
for (k = 0; k < Vect_get_node_n_lines(In, node); k++) {
line = abs(Vect_get_node_line(In, node, k));
ltype = Vect_read_line(In, NULL, Cats, line);
if (ltype != GV_POINT)
continue;
Vect_cat_get(Cats, nfield, &(cat_node[j]));
nnodes++;
}
if (nnodes == 0)
G_warning(_("Point not found: %.3lf %.3lf %.3lf line category: %d"),
x, y, z, cat_line);
else if (nnodes > 1)
G_warning(_("%d points found: %.3lf %.3lf %.3lf line category: %d"),
nnodes, x, y, z, cat_line);
}
fprintf(stdout, "%d %d %d\n", cat_line, cat_node[0], cat_node[1]);
}
}
else { /* node report */
int nnodes, node;
nnodes = Vect_get_num_nodes(In);
for (node = 1; node <= nnodes; node++) {
int nelem, elem, type, i, j, k, l;
nelem = Vect_get_node_n_lines(In, node);
/* Loop through all points */
for (i = 0; i < nelem; i++) {
elem = abs(Vect_get_node_line(In, node, i));
type = Vect_read_line(In, NULL, Cats, elem);
if (type != GV_POINT)
continue;
/* Loop through all cats of point */
for (j = 0; j < Cats->n_cats; j++) {
if (Cats->field[j] == nfield) {
int count = 0;
fprintf(stdout, "%d ", Cats->cat[j]);
/* Loop through all lines */
for (k = 0; k < nelem; k++) {
elem = abs(Vect_get_node_line(In, node, k));
type = Vect_read_line(In, NULL, Cats2, elem);
if (!(type & GV_LINES))
continue;
/* Loop through all cats of line */
for (l = 0; l < Cats2->n_cats; l++) {
if (Cats2->field[l] == afield) {
if (count > 0)
fprintf(stdout, ",");
fprintf(stdout, "%d", Cats2->cat[l]);
count++;
}
}
}
fprintf(stdout, "\n");
}
}
}
}
}
return 0;
}
int report(struct Map_info *In, int afield, int nfield, int action)
{
int i, j, line, nlines, ltype, node, nnodes;
int cat_line, cat_node[2];
struct line_cats *Cats, *Cats2;
struct line_pnts *Points;
struct bound_box box;
double x, y, z;
Cats = Vect_new_cats_struct();
Cats2 = Vect_new_cats_struct();
Points = Vect_new_line_struct();
nlines = Vect_get_num_lines(In);
if (action == TOOL_REPORT) {
struct boxlist *List;
List = Vect_new_boxlist(0);
/* For all lines find categories for points on nodes */
for (i = 1; i <= nlines; i++) {
ltype = Vect_read_line(In, NULL, Cats, i);
if (!(ltype & GV_LINES))
continue;
cat_line = 0;
if (!Vect_cat_get(Cats, afield, &cat_line))
G_warning(_("Line %d has no category"), i);
cat_node[0] = cat_node[1] = -1;
for (j = 0; j < 2; j++) {
if (j == 0)
Vect_get_line_nodes(In, i, &node, NULL);
else
Vect_get_line_nodes(In, i, NULL, &node);
Vect_get_node_coor(In, node, &x, &y, &z);
box.E = box.W = x;
box.N = box.S = y;
box.T = box.B = z;
Vect_select_lines_by_box(In, &box, GV_POINT, List);
nnodes = List->n_values;
if (nnodes > 0) {
line = List->id[nnodes - 1]; /* last in list */
Vect_read_line(In, NULL, Cats, line);
Vect_cat_get(Cats, nfield, &(cat_node[j]));
}
if (nnodes == 0) {
/* this is ok, not every node needs to be
* represented by a point */
G_debug(4, "No point here: %g %g %.g line category: %d",
x, y, z, cat_line);
}
else if (nnodes > 1)
G_warning(_("%d points found: %g %g %g line category: %d"),
nnodes, x, y, z, cat_line);
}
fprintf(stdout, "%d %d %d\n", cat_line, cat_node[0], cat_node[1]);
}
}
else { /* node report */
int elem, nelem, type, k, l;
struct ilist *List;
List = Vect_new_list();
for (i = 1; i <= nlines; i++) {
if (Vect_get_line_type(In, i) != GV_POINT)
continue;
Vect_read_line(In, Points, Cats, i);
box.E = box.W = Points->x[0];
box.N = box.S = Points->y[0];
box.T = box.B = Points->z[0];
nnodes = Vect_select_nodes_by_box(In, &box, List);
if (nnodes > 1) {
G_warning(_("Duplicate nodes at x=%g y=%g z=%g "),
Points->x[0], Points->y[0], Points->z[0]);
}
if (nnodes > 0) {
node = List->value[0];
nelem = Vect_get_node_n_lines(In, node);
/* Loop through all cats of point */
for (j = 0; j < Cats->n_cats; j++) {
if (Cats->field[j] == nfield) {
int count = 0;
fprintf(stdout, "%d ", Cats->cat[j]);
/* Loop through all lines */
for (k = 0; k < nelem; k++) {
elem = abs(Vect_get_node_line(In, node, k));
type = Vect_read_line(In, NULL, Cats2, elem);
if (!(type & GV_LINES))
continue;
/* Loop through all cats of line */
for (l = 0; l < Cats2->n_cats; l++) {
if (Cats2->field[l] == afield) {
if (count > 0)
fprintf(stdout, ",");
fprintf(stdout, "%d", Cats2->cat[l]);
count++;
}
}
}
fprintf(stdout, "\n");
}
}
}
}
}
return 0;
}
/* Same as path() but get start/stop from the command line (for non-interactive use)
Hamish Bowman March 2007 */
int coor_path(struct Map_info *Map, const struct color_rgb *hcolor,
int be_bold, double start_x, double start_y,
double end_x, double end_y)
{
int ret;
double nx, ny, fx, fy, tx, ty, msize, maxdist;
struct line_pnts *Points;
int start_node, end_node;
double fdist, tdist, cost;
Points = Vect_new_line_struct();
msize = 10 * (D_d_to_u_col(2.0) - D_d_to_u_col(1.0)); /* do it better */
G_debug(1, "msize = %f\n", msize);
/*
x1 = D_d_to_u_col ((double)(screen_x-WDTH));
y1 = D_d_to_u_row ((double)(screen_y-WDTH));
x2 = D_d_to_u_col ((double)(screen_x+WDTH));
y2 = D_d_to_u_row ((double)(screen_y+WDTH));
x1 = fabs ( x2 - x1 );
y1 = fabs ( y2 - y1 );
if ( x1 > y1 ) maxdist = x1;
else maxdist = y1;
*/
/** maxdist = 10 pixels on the display (WDTH*2); ?
** ie related to zoom level ?? just use msize ?? **/
maxdist = msize;
G_debug(1, "Maximum distance in map units = %f\n", maxdist);
/* Vect_find_node(): find number of nearest node, 0 if not found */
start_node = Vect_find_node(Map, start_x, start_y, 0.0, maxdist, 0);
if (start_node > 0) {
Vect_get_node_coor(Map, start_node, &nx, &ny, NULL);
fprintf(stderr, _("Node %d: %f %f\n"), start_node, nx, ny);
}
if (start_node > 0) {
fx = nx;
fy = ny;
}
else {
fx = start_x;
fy = start_y;
}
D_RGB_color(hcolor->r, hcolor->g, hcolor->b);
D_plot_icon(fx, fy, G_ICON_BOX, 0.0, msize);
end_node = Vect_find_node(Map, end_x, end_y, 0.0, maxdist, 0);
if (end_node > 0) {
Vect_get_node_coor(Map, end_node, &nx, &ny, NULL);
fprintf(stderr, _("Node %d: %f %f\n"), end_node, nx, ny);
}
if (end_node > 0) {
tx = nx;
ty = ny;
}
else {
tx = end_x;
ty = end_y;
}
D_RGB_color(hcolor->r, hcolor->g, hcolor->b);
D_plot_icon(tx, ty, G_ICON_CROSS, 0.0, msize);
G_debug(2, "find path %f %f -> %f %f", fx, fy, tx, ty);
ret =
Vect_net_shortest_path_coor(Map, fx, fy, 0.0, tx, ty, 0.0,
5 * maxdist, 5 * maxdist, &cost, Points,
NULL, NULL, NULL, &fdist, &tdist);
if (ret == 0) {
fprintf(stdout, _("Destination unreachable\n"));
}
else {
fprintf(stdout, _("Costs on the network = %f\n"), cost);
fprintf(stdout, _(" Distance to the network = %f, "
"distance from the network = %f\n\n"),
fdist, tdist);
display(Map, Points, hcolor, 1, 1, be_bold);
}
return 0;
}
/*!
\brief Connect lines in given threshold
\code
\ \
id1 \ -> \
\
id2 --------- -----+---
\endcode
If two lines are selected and <i>thresh</i> is -1, no limit is
applied.
\param Map pointer to Map_info
\param List list of selected lines
\param thresh threshold value
\return number of modified lines
\return -1 on error
*/
int Vedit_connect_lines(struct Map_info *Map, struct ilist *List,
double thresh)
{
int nlines_modified, connected;
int i, j, node[2], n_nodes;
int line, found;
double x, y, z;
struct ilist *List_exclude, *List_found;
nlines_modified = 0;
List_exclude = Vect_new_list();
List_found = Vect_new_list();
n_nodes = 2;
/* collect lines to be modified */
for (i = 0; i < List->n_values; i++) {
line = List->value[i];
if (!Vect_line_alive(Map, line))
continue;
if (Vect_get_line_type(Map, line) & GV_POINTS)
continue;
node[0] = node[1] = -1;
Vect_get_line_nodes(Map, line, &(node[0]), &(node[1]));
if (node[0] < 0 || node[1] < 0)
continue;
connected = 0;
Vect_reset_list(List_exclude);
Vect_list_append(List_exclude, line);
for (j = 0; j < n_nodes && !connected; j++) {
/* for each line node find lines in threshold */
Vect_get_node_coor(Map, node[j], &x, &y, &z);
do {
/* find first nearest line */
found = Vect_find_line_list(Map, x, y, z,
GV_LINES, thresh, WITHOUT_Z,
List_exclude, List_found);
if (found > 0 && Vect_line_alive(Map, found)) {
/* try to connect lines (given node) */
G_debug(3, "Vedit_connect_lines(): lines=%d,%d", line, found);
if (connect_lines(Map, !j, line, found, thresh, List)) {
G_debug(3, "Vedit_connect_lines(): lines=%d,%d -> connected",
line, found);
nlines_modified += 2;
connected = 1;
}
}
Vect_list_append(List_exclude, found);
} while(List_found->n_values > 0 && !connected);
}
}
Vect_destroy_list(List_exclude);
Vect_destroy_list(List_found);
return nlines_modified;
}
int display_topo(struct Map_info *Map, int type, LATTR *lattr, double dsize)
{
int ltype, num, el;
double msize;
struct line_pnts *Points;
struct line_cats *Cats;
char text[50];
LATTR lattr2 = *lattr;
if (Vect_level(Map) < 2) {
G_warning(_("Unable to display topology, not available."
"Please try to rebuild topology using "
"v.build or v.build.all."));
return 1;
}
msize = dsize * (D_d_to_u_col(2.0) - D_d_to_u_col(1.0)); /* do it better */
lattr2.xref = lattr->xref == LRIGHT ? LLEFT : LRIGHT;
G_debug(1, "display topo:");
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
D_RGB_color(lattr->color.R, lattr->color.G, lattr->color.B);
D_text_size(lattr->size, lattr->size);
if (lattr->font)
D_font(lattr->font);
if (lattr->enc)
D_encoding(lattr->enc);
Vect_rewind(Map);
num = Vect_get_num_lines(Map);
G_debug(1, "n_lines = %d", num);
/* Lines */
for (el = 1; el <= num; el++) {
if (!Vect_line_alive(Map, el))
continue;
ltype = Vect_read_line(Map, Points, Cats, el);
G_debug(3, "ltype = %d", ltype);
switch (ltype) {
case -1:
G_fatal_error(_("Unable to read vector map"));
case -2: /* EOF */
return 0;
}
if (!(type & ltype))
continue; /* used for both lines and labels */
sprintf(text, "%d", el);
show_label_line(Points, ltype, lattr, text);
}
num = Vect_get_num_nodes(Map);
G_debug(1, "n_nodes = %d", num);
/* Nodes */
for (el = 1; el <= num; el++) {
double X, Y;
if (!Vect_node_alive(Map, el))
continue;
Vect_get_node_coor(Map, el, &X, &Y, NULL);
G_debug(3, "node = %d", el);
sprintf(text, "n%d", el);
show_label(&X, &Y, &lattr2, text);
D_plot_icon(X, Y, G_ICON_BOX, 0, msize);
}
Vect_destroy_line_struct(Points);
Vect_destroy_cats_struct(Cats);
return 0;
}
int main(int argc, char **argv)
{
int i;
int **cats, *ncats, nfields, *fields;
struct Flag *line_flag;
/* struct Flag *all_flag; */
struct Option *in_opt, *out_opt;
struct Flag *table_flag;
struct GModule *module;
struct line_pnts *Points;
struct line_cats *Cats;
int node, nnodes;
COOR *coor;
int ncoor, acoor;
int line, nlines, type, ctype, area, nareas;
int err_boundaries, err_centr_out, err_centr_dupl, err_nocentr;
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("geometry"));
G_add_keyword(_("triangulation"));
module->description = _("Creates a Voronoi diagram from an input vector "
"map containing points or centroids.");
in_opt = G_define_standard_option(G_OPT_V_INPUT);
out_opt = G_define_standard_option(G_OPT_V_OUTPUT);
/*
all_flag = G_define_flag ();
all_flag->key = 'a';
all_flag->description = _("Use all points (do not limit to current region)");
*/
line_flag = G_define_flag();
line_flag->key = 'l';
line_flag->description =
_("Output tessellation as a graph (lines), not areas");
table_flag = G_define_flag();
table_flag->key = 't';
table_flag->description = _("Do not create attribute table");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
if (line_flag->answer)
Type = GV_LINE;
else
Type = GV_BOUNDARY;
All = 0;
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
/* open files */
Vect_set_open_level(2);
Vect_open_old(&In, in_opt->answer, "");
if (Vect_open_new(&Out, out_opt->answer, 0) < 0)
G_fatal_error(_("Unable to create vector map <%s>"), out_opt->answer);
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
/* initialize working region */
G_get_window(&Window);
Vect_region_box(&Window, &Box);
Box.T = 0.5;
Box.B = -0.5;
freeinit(&sfl, sizeof(struct Site));
G_message(_("Reading sites..."));
readsites();
siteidx = 0;
geominit();
triangulate = 0;
plot = 0;
debug = 0;
G_message(_("Voronoi triangulation..."));
voronoi(triangulate, nextone);
/* Close free ends by current region */
Vect_build_partial(&Out, GV_BUILD_BASE);
ncoor = 0;
acoor = 100;
coor = (COOR *) G_malloc(sizeof(COOR) * acoor);
nnodes = Vect_get_num_nodes(&Out);
for (node = 1; node <= nnodes; node++) {
double x, y;
if (Vect_get_node_n_lines(&Out, node) < 2) { /* add coordinates */
Vect_get_node_coor(&Out, node, &x, &y, NULL);
if (ncoor == acoor - 5) { /* always space for 5 region corners */
acoor += 100;
coor = (COOR *) G_realloc(coor, sizeof(COOR) * acoor);
}
coor[ncoor].x = x;
coor[ncoor].y = y;
ncoor++;
}
}
/* Add region corners */
coor[ncoor].x = Box.W;
coor[ncoor].y = Box.S;
ncoor++;
coor[ncoor].x = Box.E;
coor[ncoor].y = Box.S;
ncoor++;
coor[ncoor].x = Box.E;
coor[ncoor].y = Box.N;
ncoor++;
coor[ncoor].x = Box.W;
coor[ncoor].y = Box.N;
ncoor++;
/* Sort */
qsort(coor, ncoor, sizeof(COOR), (void *)cmp);
/* add last (first corner) */
coor[ncoor].x = Box.W;
coor[ncoor].y = Box.S;
ncoor++;
for (i = 1; i < ncoor; i++) {
if (coor[i].x == coor[i - 1].x && coor[i].y == coor[i - 1].y)
continue; /* duplicate */
Vect_reset_line(Points);
Vect_append_point(Points, coor[i].x, coor[i].y, 0.0);
Vect_append_point(Points, coor[i - 1].x, coor[i - 1].y, 0.0);
Vect_write_line(&Out, Type, Points, Cats);
}
G_free(coor);
/* Copy input points as centroids */
nfields = Vect_cidx_get_num_fields(&In);
cats = (int **)G_malloc(nfields * sizeof(int *));
ncats = (int *)G_malloc(nfields * sizeof(int));
fields = (int *)G_malloc(nfields * sizeof(int));
for (i = 0; i < nfields; i++) {
ncats[i] = 0;
cats[i] =
(int *)G_malloc(Vect_cidx_get_num_cats_by_index(&In, i) *
sizeof(int));
fields[i] = Vect_cidx_get_field_number(&In, i);
}
if (line_flag->answer)
ctype = GV_POINT;
else
ctype = GV_CENTROID;
nlines = Vect_get_num_lines(&In);
G_message(_("Writing sites to output..."));
for (line = 1; line <= nlines; line++) {
G_percent(line, nlines, 2);
type = Vect_read_line(&In, Points, Cats, line);
if (!(type & GV_POINTS))
continue;
if (!Vect_point_in_box(Points->x[0], Points->y[0], 0.0, &Box))
continue;
Vect_write_line(&Out, ctype, Points, Cats);
for (i = 0; i < Cats->n_cats; i++) {
int f, j;
f = -1;
for (j = 0; j < nfields; j++) { /* find field */
if (fields[j] == Cats->field[i]) {
f = j;
break;
}
}
if (f > -1) {
cats[f][ncats[f]] = Cats->cat[i];
ncats[f]++;
}
}
}
/* Copy tables */
if (!(table_flag->answer)) {
int ttype, ntabs = 0;
struct field_info *IFi, *OFi;
/* Number of output tabs */
for (i = 0; i < Vect_get_num_dblinks(&In); i++) {
int f, j;
IFi = Vect_get_dblink(&In, i);
f = -1;
for (j = 0; j < nfields; j++) { /* find field */
if (fields[j] == IFi->number) {
f = j;
break;
}
}
if (f > -1) {
if (ncats[f] > 0)
ntabs++;
}
}
if (ntabs > 1)
ttype = GV_MTABLE;
else
ttype = GV_1TABLE;
for (i = 0; i < nfields; i++) {
int ret;
if (fields[i] == 0)
continue;
G_message(_("Layer %d"), fields[i]);
/* Make a list of categories */
IFi = Vect_get_field(&In, fields[i]);
if (!IFi) { /* no table */
G_message(_("No table"));
continue;
}
OFi =
Vect_default_field_info(&Out, IFi->number, IFi->name, ttype);
ret =
db_copy_table_by_ints(IFi->driver, IFi->database, IFi->table,
OFi->driver,
Vect_subst_var(OFi->database, &Out),
OFi->table, IFi->key, cats[i],
ncats[i]);
if (ret == DB_FAILED) {
G_warning(_("Cannot copy table"));
}
else {
Vect_map_add_dblink(&Out, OFi->number, OFi->name, OFi->table,
IFi->key, OFi->database, OFi->driver);
}
}
}
Vect_close(&In);
/* cleaning part 1: count errors */
Vect_build_partial(&Out, GV_BUILD_CENTROIDS);
err_boundaries = err_centr_out = err_centr_dupl = err_nocentr = 0;
nlines = Vect_get_num_lines(&Out);
for (line = 1; line <= nlines; line++) {
if (!Vect_line_alive(&Out, line))
continue;
type = Vect_get_line_type(&Out, line);
if (type == GV_BOUNDARY) {
int left, right;
Vect_get_line_areas(&Out, line, &left, &right);
if (left == 0 || right == 0) {
G_debug(3, "line = %d left = %d right = %d", line,
left, right);
err_boundaries++;
}
}
if (type == GV_CENTROID) {
area = Vect_get_centroid_area(&Out, line);
if (area == 0)
err_centr_out++;
else if (area < 0)
err_centr_dupl++;
}
}
err_nocentr = 0;
nareas = Vect_get_num_areas(&Out);
for (area = 1; area <= nareas; area++) {
if (!Vect_area_alive(&Out, area))
continue;
line = Vect_get_area_centroid(&Out, area);
if (line == 0)
err_nocentr++;
}
/* cleaning part 2: snap */
if (err_nocentr || err_centr_dupl || err_centr_out) {
int nmod;
G_important_message(_("Output needs topological cleaning"));
Vect_snap_lines(&Out, GV_BOUNDARY, 1e-7, NULL);
do {
Vect_break_lines(&Out, GV_BOUNDARY, NULL);
Vect_remove_duplicates(&Out, GV_BOUNDARY, NULL);
nmod =
Vect_clean_small_angles_at_nodes(&Out, GV_BOUNDARY, NULL);
} while (nmod > 0);
err_boundaries = 0;
nlines = Vect_get_num_lines(&Out);
for (line = 1; line <= nlines; line++) {
if (!Vect_line_alive(&Out, line))
continue;
type = Vect_get_line_type(&Out, line);
if (type == GV_BOUNDARY) {
int left, right;
Vect_get_line_areas(&Out, line, &left, &right);
if (left == 0 || right == 0) {
G_debug(3, "line = %d left = %d right = %d", line,
left, right);
err_boundaries++;
}
}
}
}
/* cleaning part 3: remove remaining incorrect boundaries */
if (err_boundaries) {
G_important_message(_("Removing incorrect boundaries from output"));
nlines = Vect_get_num_lines(&Out);
for (line = 1; line <= nlines; line++) {
if (!Vect_line_alive(&Out, line))
continue;
type = Vect_get_line_type(&Out, line);
if (type == GV_BOUNDARY) {
int left, right;
Vect_get_line_areas(&Out, line, &left, &right);
/* &&, not ||, no typo */
if (left == 0 && right == 0) {
G_debug(3, "line = %d left = %d right = %d", line,
left, right);
Vect_delete_line(&Out, line);
}
}
}
}
/* build clean topology */
Vect_build_partial(&Out, GV_BUILD_NONE);
Vect_build(&Out);
Vect_close(&Out);
G_done_msg(" ");
exit(EXIT_SUCCESS);
}
int main(int argc, char **argv)
{
int i, j, k, ret;
int nlines, type, ltype, afield, tfield, geo, cat;
int sp, nsp, nspused, node, line;
struct Option *map, *output, *afield_opt, *tfield_opt, *afcol, *type_opt,
*term_opt, *nsp_opt;
struct Flag *geo_f;
struct GModule *module;
struct Map_info Map, Out;
int *testnode; /* array all nodes: 1 - should be tested as Steiner,
* 0 - no need to test (unreachable or terminal) */
struct ilist *TList; /* list of terminal nodes */
struct ilist *StArcs; /* list of arcs on Steiner tree */
struct ilist *StNodes; /* list of nodes on Steiner tree */
struct boxlist *pointlist;
double cost, tmpcost;
struct cat_list *Clist;
struct line_cats *Cats;
struct line_pnts *Points;
/* Initialize the GIS calls */
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("network"));
G_add_keyword(_("steiner tree"));
module->label =
_("Creates Steiner tree for the network and given terminals.");
module->description =
_("Note that 'Minimum Steiner Tree' problem is NP-hard "
"and heuristic algorithm is used in this module so "
"the result may be sub optimal.");
map = G_define_standard_option(G_OPT_V_INPUT);
output = G_define_standard_option(G_OPT_V_OUTPUT);
type_opt = G_define_standard_option(G_OPT_V_TYPE);
type_opt->key = "arc_type";
type_opt->options = "line,boundary";
type_opt->answer = "line,boundary";
type_opt->label = _("Arc type");
afield_opt = G_define_standard_option(G_OPT_V_FIELD);
afield_opt->key = "arc_layer";
afield_opt->answer = "1";
afield_opt->label = _("Arc layer");
tfield_opt = G_define_standard_option(G_OPT_V_FIELD);
tfield_opt->key = "node_layer";
tfield_opt->answer = "2";
tfield_opt->label = _("Node layer (used for terminals)");
afcol = G_define_option();
afcol->key = "acolumn";
afcol->type = TYPE_STRING;
afcol->required = NO;
afcol->description = _("Arcs' cost column (for both directions)");
term_opt = G_define_standard_option(G_OPT_V_CATS);
term_opt->key = "terminal_cats";
term_opt->required = YES;
term_opt->description =
_("Categories of points on terminals (layer is specified by nlayer)");
nsp_opt = G_define_option();
nsp_opt->key = "npoints";
nsp_opt->type = TYPE_INTEGER;
nsp_opt->required = NO;
nsp_opt->multiple = NO;
nsp_opt->answer = "-1";
nsp_opt->description = _("Number of Steiner points (-1 for all possible)");
geo_f = G_define_flag();
geo_f->key = 'g';
geo_f->description =
_("Use geodesic calculation for longitude-latitude locations");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
Cats = Vect_new_cats_struct();
Points = Vect_new_line_struct();
type = Vect_option_to_types(type_opt);
afield = atoi(afield_opt->answer);
TList = Vect_new_list();
StArcs = Vect_new_list();
StNodes = Vect_new_list();
Clist = Vect_new_cat_list();
tfield = atoi(tfield_opt->answer);
Vect_str_to_cat_list(term_opt->answer, Clist);
G_debug(1, "Imput categories:\n");
for (i = 0; i < Clist->n_ranges; i++) {
G_debug(1, "%d - %d\n", Clist->min[i], Clist->max[i]);
}
if (geo_f->answer)
geo = 1;
else
geo = 0;
Vect_check_input_output_name(map->answer, output->answer, G_FATAL_EXIT);
Vect_set_open_level(2);
if (Vect_open_old(&Map, map->answer, "") < 0)
G_fatal_error(_("Unable to open vector map <%s>"), map->answer);
nnodes = Vect_get_num_nodes(&Map);
nlines = Vect_get_num_lines(&Map);
/* Create list of terminals based on list of categories */
for (i = 1; i <= nlines; i++) {
ltype = Vect_get_line_type(&Map, i);
if (!(ltype & GV_POINT))
continue;
Vect_read_line(&Map, Points, Cats, i);
if (!(Vect_cat_get(Cats, tfield, &cat)))
continue;
node = Vect_find_node(&Map, Points->x[0], Points->y[0], Points->z[0], 0, 0);
if (!node) {
G_warning(_("Point is not connected to the network (cat=%d)"), cat);
continue;
}
if (Vect_cat_in_cat_list(cat, Clist)) {
Vect_list_append(TList, node);
}
}
nterms = TList->n_values;
/* GTC Terminal refers to an Steiner tree endpoint */
G_message(_("Number of terminals: %d\n"), nterms);
if (nterms < 2) {
/* GTC Terminal refers to an Steiner tree endpoint */
G_fatal_error(_("Not enough terminals (< 2)"));
}
/* Number of steiner points */
nsp = atoi(nsp_opt->answer);
if (nsp > nterms - 2) {
nsp = nterms - 2;
G_warning(_("Requested number of Steiner points > than possible"));
}
else if (nsp == -1) {
nsp = nterms - 2;
}
G_message(_("Number of Steiner points set to %d\n"), nsp);
testnode = (int *)G_malloc((nnodes + 1) * sizeof(int));
for (i = 1; i <= nnodes; i++)
testnode[i] = 1;
/* Alloc arrays of costs for nodes, first node at 1 (0 not used) */
nodes_costs = (double **)G_malloc((nnodes) * sizeof(double *));
for (i = 0; i < nnodes; i++) {
nodes_costs[i] =
(double *)G_malloc((nnodes - i) * sizeof(double));
for (j = 0; j < nnodes - i; j++)
nodes_costs[i][j] = -1; /* init, i.e. cost was not calculated yet */
}
/* alloc memory from each to each other (not directed) terminal */
i = nterms + nterms - 2; /* max number of terms + Steiner points */
comps = (int *)G_malloc(i * sizeof(int));
i = i * (i - 1) / 2; /* number of combinations */
term_costs = (COST *) G_malloc(i * sizeof(COST));
/* alloc memory for costs from Stp to each other terminal */
i = nterms + nterms - 2 - 1; /* max number of terms + Steiner points - 1 */
sp_costs = (COST *) G_malloc(i * sizeof(COST));
terms = (int *)G_malloc((nterms + nterms - 2) * sizeof(int)); /* i.e. +(nterms - 2) St Points */
/* Create initial parts from list of terminals */
G_debug(1, "List of terminal nodes (%d):\n", nterms);
for (i = 0; i < nterms; i++) {
G_debug(1, "%d\n", TList->value[i]);
terms[i] = TList->value[i];
testnode[terms[i]] = 0; /* do not test as Steiner */
}
/* Build graph */
Vect_net_build_graph(&Map, type, afield, 0, afcol->answer, NULL, NULL,
geo, 0);
/* Init costs for all terminals */
for (i = 0; i < nterms; i++)
init_node_costs(&Map, terms[i]);
/* Test if all terminal may be connected */
for (i = 1; i < nterms; i++) {
ret = get_node_costs(terms[0], terms[i], &cost);
if (ret == 0) {
/* GTC Terminal refers to an Steiner tree endpoint */
G_fatal_error(_("Terminal at node [%d] cannot be connected "
"to terminal at node [%d]"), terms[0], terms[i]);
}
}
/* Remove not reachable from list of SP candidates */
j = 0;
for (i = 1; i <= nnodes; i++) {
ret = get_node_costs(terms[0], i, &cost);
if (ret == 0) {
testnode[i] = 0;
G_debug(2, "node %d removed from list of Steiner point candidates\n", i );
j++;
}
}
G_message(_("[%d] (not reachable) nodes removed from list "
"of Steiner point candidates"), j);
/* calc costs for terminals MST */
ret = mst(&Map, terms, nterms, &cost, PORT_DOUBLE_MAX, NULL, NULL, 0, 1); /* no StP, rebuild */
G_message(_("MST costs = %f"), cost);
/* Go through all nodes and try to use as steiner points -> find that which saves most costs */
nspused = 0;
for (j = 0; j < nsp; j++) {
sp = 0;
G_verbose_message(_("Search for [%d]. Steiner point"), j + 1);
for (i = 1; i <= nnodes; i++) {
G_percent(i, nnodes, 1);
if (testnode[i] == 0) {
G_debug(3, "skip test for %d\n", i);
continue;
}
ret =
mst(&Map, terms, nterms + j, &tmpcost, cost, NULL, NULL, i,
0);
G_debug(2, "cost = %f x %f\n", tmpcost, cost);
if (tmpcost < cost) { /* sp candidate */
G_debug(3,
" steiner candidate node = %d mst = %f (x last = %f)\n",
i, tmpcost, cost);
sp = i;
cost = tmpcost;
}
}
if (sp > 0) {
G_message(_("Steiner point at node [%d] was added "
"to terminals (MST costs = %f)"), sp, cost);
terms[nterms + j] = sp;
init_node_costs(&Map, sp);
testnode[sp] = 0;
nspused++;
/* rebuild for nex cycle */
ret =
mst(&Map, terms, nterms + nspused, &tmpcost, PORT_DOUBLE_MAX,
NULL, NULL, 0, 1);
}
else { /* no steiner found */
G_message(_("No Steiner point found -> leaving cycle"));
break;
}
}
G_message(_("Number of added Steiner points: %d "
"(theoretic max is %d).\n"), nspused, nterms - 2);
/* Build lists of arcs and nodes for final version */
ret =
mst(&Map, terms, nterms + nspused, &cost, PORT_DOUBLE_MAX, StArcs,
StNodes, 0, 0);
/* Calculate true costs, which may be lower than MST if steiner points were not used */
if (nsp < nterms - 2) {
G_message(_("Spanning tree costs on complet graph = %f\n"
"(may be higher than resulting Steiner tree costs!!!)"),
cost);
}
else
G_message(_("Steiner tree costs = %f"), cost);
/* Write arcs to new map */
if (Vect_open_new(&Out, output->answer, Vect_is_3d(&Map)) < 0)
G_fatal_error(_("Unable to create vector map <%s>"), output->answer);
Vect_hist_command(&Out);
G_debug(1, "Steiner tree:");
G_debug(1, "Arcs' categories (layer %d, %d arcs):", afield,
StArcs->n_values);
for (i = 0; i < StArcs->n_values; i++) {
line = StArcs->value[i];
ltype = Vect_read_line(&Map, Points, Cats, line);
Vect_write_line(&Out, ltype, Points, Cats);
Vect_cat_get(Cats, afield, &cat);
G_debug(1, "arc cat = %d", cat);
}
G_debug(1, "Nodes' categories (layer %d, %d nodes):", tfield,
StNodes->n_values);
k = 0;
pointlist = Vect_new_boxlist(0);
for (i = 0; i < StNodes->n_values; i++) {
double x, y, z;
struct bound_box box;
node = StNodes->value[i];
Vect_get_node_coor(&Map, node, &x, &y, &z);
box.E = box.W = x;
box.N = box.S = y;
box.T = box.B = z;
Vect_select_lines_by_box(&Map, &box, GV_POINT, pointlist);
nlines = Vect_get_node_n_lines(&Map, node);
for (j = 0; j < pointlist->n_values; j++) {
line = pointlist->id[j];
ltype = Vect_read_line(&Map, Points, Cats, line);
if (!(ltype & GV_POINT))
continue;
if (!(Vect_cat_get(Cats, tfield, &cat)))
continue;
Vect_write_line(&Out, ltype, Points, Cats);
G_debug(1, "node cat = %d", cat);
k++;
}
}
Vect_build(&Out);
G_message(n_("A Steiner tree with %d arc has been built",
"A Steiner tree with %d arcs has been built", StArcs->n_values),
StArcs->n_values);
/* Free, ... */
Vect_destroy_list(StArcs);
Vect_destroy_list(StNodes);
Vect_close(&Map);
Vect_close(&Out);
exit(EXIT_SUCCESS);
}
int main(int argc, char *argv[])
{
struct Map_info In, Out;
static struct line_pnts *Points;
struct line_cats *Cats;
struct GModule *module; /* GRASS module for parsing arguments */
struct Option *map_in, *map_out;
struct Option *afield_opt, *nfield_opt, *abcol, *afcol, *ncol,
*method_opt;
int with_z;
int afield, nfield, mask_type;
dglGraph_s *graph;
int i, bridges, articulations;
struct ilist *bridge_list, *articulation_list;
/* initialize GIS environment */
G_gisinit(argv[0]); /* reads grass env, stores program name to G_program_name() */
/* initialize module */
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("network"));
G_add_keyword(_("articulation points"));
module->description =
_("Computes bridges and articulation points in the network.");
/* Define the different options as defined in gis.h */
map_in = G_define_standard_option(G_OPT_V_INPUT);
map_out = G_define_standard_option(G_OPT_V_OUTPUT);
afield_opt = G_define_standard_option(G_OPT_V_FIELD);
afield_opt->key = "alayer";
afield_opt->answer = "1";
afield_opt->description = _("Arc layer");
afield_opt->guisection = _("Cost");
nfield_opt = G_define_standard_option(G_OPT_V_FIELD);
nfield_opt->key = "nlayer";
nfield_opt->answer = "2";
nfield_opt->description = _("Node layer");
nfield_opt->guisection = _("Cost");
afcol = G_define_standard_option(G_OPT_DB_COLUMN);
afcol->key = "afcolumn";
afcol->required = NO;
afcol->description =
_("Arc forward/both direction(s) cost column (number)");
afcol->guisection = _("Cost");
abcol = G_define_standard_option(G_OPT_DB_COLUMN);
abcol->key = "abcolumn";
abcol->required = NO;
abcol->description = _("Arc backward direction cost column (number)");
abcol->guisection = _("Cost");
ncol = G_define_option();
ncol->key = "ncolumn";
ncol->type = TYPE_STRING;
ncol->required = NO;
ncol->description = _("Node cost column (number)");
ncol->guisection = _("Cost");
method_opt = G_define_option();
method_opt->key = "method";
method_opt->type = TYPE_STRING;
method_opt->required = YES;
method_opt->multiple = NO;
method_opt->options = "bridge,articulation";
method_opt->descriptions = _("bridge;Finds bridges;"
"articulation;Finds articulation points;");
method_opt->description = _("Feature type");
/* options and flags parser */
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
/* TODO: make an option for this */
mask_type = GV_LINE | GV_BOUNDARY;
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
Vect_check_input_output_name(map_in->answer, map_out->answer,
GV_FATAL_EXIT);
Vect_set_open_level(2);
if (1 > Vect_open_old(&In, map_in->answer, ""))
G_fatal_error(_("Unable to open vector map <%s>"), map_in->answer);
with_z = Vect_is_3d(&In);
if (0 > Vect_open_new(&Out, map_out->answer, with_z)) {
Vect_close(&In);
G_fatal_error(_("Unable to create vector map <%s>"), map_out->answer);
}
/* parse filter option and select appropriate lines */
afield = Vect_get_field_number(&In, afield_opt->answer);
nfield = Vect_get_field_number(&In, nfield_opt->answer);
Vect_net_build_graph(&In, mask_type, afield, nfield, afcol->answer,
abcol->answer, ncol->answer, 0, 0);
graph = &(In.graph);
Vect_copy_head_data(&In, &Out);
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
if (method_opt->answer[0] == 'b') {
bridge_list = Vect_new_list();
bridges = NetA_compute_bridges(graph, bridge_list);
G_debug(3, "Bridges: %d", bridges);
for (i = 0; i < bridges; i++) {
int type =
Vect_read_line(&In, Points, Cats, abs(bridge_list->value[i]));
Vect_write_line(&Out, type, Points, Cats);
}
Vect_destroy_list(bridge_list);
}
else {
articulation_list = Vect_new_list();
articulations = NetA_articulation_points(graph, articulation_list);
G_debug(3, "Articulation points: %d", articulations);
for (i = 0; i < articulations; i++) {
double x, y, z;
Vect_get_node_coor(&In, articulation_list->value[i], &x, &y, &z);
Vect_reset_line(Points);
Vect_append_point(Points, x, y, z);
Vect_write_line(&Out, GV_POINT, Points, Cats);
}
Vect_destroy_list(articulation_list);
}
Vect_build(&Out);
Vect_close(&In);
Vect_close(&Out);
exit(EXIT_SUCCESS);
}
int write_triple(struct Site *s1, struct Site *s2, struct Site *s3)
{
int i;
int node;
static struct line_pnts *Points = NULL;
static struct line_cats *Cats = NULL;
struct Site *sa, *sb;
if (!Points) {
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
}
if (triangulate) {
for (i = 0; i < 3; i++) {
switch (i) {
case 0:
sa = s1;
sb = s2;
break;
case 1:
sa = s2;
sb = s3;
break;
case 2:
sa = s3;
sb = s1;
break;
}
/* Look if the line already exists */
node =
Vect_find_node(&Out, sa->coord.x, sa->coord.y, 0.0, 0.0, 0);
if (node > 0) { /* node found */
int j, nlines;
int found = 0;
double x, y, z;
nlines = Vect_get_node_n_lines(&Out, node);
for (j = 0; j < nlines; j++) {
int line, node2;
line = Vect_get_node_line(&Out, node, j);
if (line > 0)
Vect_get_line_nodes(&Out, line, NULL, &node2);
else
Vect_get_line_nodes(&Out, abs(line), &node2, NULL);
Vect_get_node_coor(&Out, node2, &x, &y, &z);
if (x == sb->coord.x && y == sb->coord.y) {
found = 1;
break;
}
}
if (found)
continue; /* next segment */
}
/* Not found, write it */
Vect_reset_line(Points);
if (mode3d) {
G_debug(3, "sa->coord.z: %f", sa->coord.z);
Vect_append_point(Points, sa->coord.x, sa->coord.y,
sa->coord.z);
Vect_append_point(Points, sb->coord.x, sb->coord.y,
sb->coord.z);
}
else {
Vect_append_point(Points, sa->coord.x, sa->coord.y, 0.0);
Vect_append_point(Points, sb->coord.x, sb->coord.y, 0.0);
}
Vect_write_line(&Out, Type, Points, Cats);
}
}
return 0;
}
int
Vect_break_lines_list(struct Map_info *Map, struct ilist *List_break,
struct ilist *List_ref, int type, struct Map_info *Err)
{
struct line_pnts *APoints, *BPoints, *Points;
struct line_pnts **AXLines, **BXLines;
struct line_cats *ACats, *BCats, *Cats;
int j, k, l, ret, atype, btype, aline, bline, found, iline, nlines;
int naxlines, nbxlines, nx;
double *xx = NULL, *yx = NULL, *zx = NULL;
struct bound_box ABox, BBox;
struct boxlist *List;
int nbreaks;
int touch1_n = 0, touch1_s = 0, touch1_e = 0, touch1_w = 0; /* other vertices except node1 touching box */
int touch2_n = 0, touch2_s = 0, touch2_e = 0, touch2_w = 0; /* other vertices except node2 touching box */
int is3d;
int node, anode1, anode2, bnode1, bnode2;
double nodex, nodey;
APoints = Vect_new_line_struct();
BPoints = Vect_new_line_struct();
Points = Vect_new_line_struct();
ACats = Vect_new_cats_struct();
BCats = Vect_new_cats_struct();
Cats = Vect_new_cats_struct();
List = Vect_new_boxlist(1);
is3d = Vect_is_3d(Map);
if (List_break) {
nlines = List_break->n_values;
}
else {
nlines = Vect_get_num_lines(Map);
}
G_debug(3, "nlines = %d", nlines);
/* TODO: It seems that lines/boundaries are not broken at intersections
* with points/centroids. Check if true, if yes, skip GV_POINTS
*/
/* To find intersection of two lines (Vect_line_intersection) is quite slow.
* Fortunately usual lines/boundaries in GIS often forms a network where lines
* are connected by end points, and touch by MBR. This function checks and occasionaly
* skips such cases. This is currently done for 2D only
*/
/* Go through all lines in vector, for each select lines which overlap MBR of
* this line exclude those connected by one endpoint (see above)
* and try to intersect, if lines intersect write new lines at the end of
* the file, and process next line (remaining lines overlapping box are skipped)
*/
nbreaks = 0;
for (iline = 0; iline < nlines; iline++) {
G_percent(iline, nlines, 1);
if (List_break) {
aline = List_break->value[iline];
}
else {
aline = iline + 1;
}
if (List_ref && !Vect_val_in_list(List_ref, aline))
continue;
G_debug(3, "aline = %d", aline);
if (!Vect_line_alive(Map, aline))
continue;
atype = Vect_read_line(Map, APoints, ACats, aline);
if (!(atype & type))
continue;
Vect_line_box(APoints, &ABox);
/* Find which sides of the box are touched by intermediate (non-end) points of line */
if (!is3d) {
touch1_n = touch1_s = touch1_e = touch1_w = 0;
for (j = 1; j < APoints->n_points; j++) {
if (APoints->y[j] == ABox.N)
touch1_n = 1;
if (APoints->y[j] == ABox.S)
touch1_s = 1;
if (APoints->x[j] == ABox.E)
touch1_e = 1;
if (APoints->x[j] == ABox.W)
touch1_w = 1;
}
G_debug(3, "touch1: n = %d s = %d e = %d w = %d", touch1_n,
touch1_s, touch1_e, touch1_w);
touch2_n = touch2_s = touch2_e = touch2_w = 0;
for (j = 0; j < APoints->n_points - 1; j++) {
if (APoints->y[j] == ABox.N)
touch2_n = 1;
if (APoints->y[j] == ABox.S)
touch2_s = 1;
if (APoints->x[j] == ABox.E)
touch2_e = 1;
if (APoints->x[j] == ABox.W)
touch2_w = 1;
}
G_debug(3, "touch2: n = %d s = %d e = %d w = %d", touch2_n,
touch2_s, touch2_e, touch2_w);
}
Vect_select_lines_by_box(Map, &ABox, type, List);
G_debug(3, " %d lines selected by box", List->n_values);
for (j = 0; j < List->n_values; j++) {
bline = List->id[j];
if (List_break && !Vect_val_in_list(List_break, bline)) {
continue;
}
G_debug(3, " j = %d bline = %d", j, bline);
btype = Vect_read_line(Map, BPoints, BCats, bline);
/* Check if thouch by end node only */
if (!is3d) {
Vect_get_line_nodes(Map, aline, &anode1, &anode2);
Vect_get_line_nodes(Map, bline, &bnode1, &bnode2);
BBox = List->box[j];
if (anode1 == bnode1 || anode1 == bnode2)
node = anode1;
else if (anode2 == bnode1 || anode2 == bnode2)
node = anode2;
else
node = 0;
if (node) {
Vect_get_node_coor(Map, node, &nodex, &nodey, NULL);
if ((node == anode1 && nodey == ABox.N &&
!touch1_n && nodey == BBox.S) ||
(node == anode2 && nodey == ABox.N &&
!touch2_n && nodey == BBox.S) ||
(node == anode1 && nodey == ABox.S &&
!touch1_s && nodey == BBox.N) ||
(node == anode2 && nodey == ABox.S &&
!touch2_s && nodey == BBox.N) ||
(node == anode1 && nodex == ABox.E &&
!touch1_e && nodex == BBox.W) ||
(node == anode2 && nodex == ABox.E &&
!touch2_e && nodex == BBox.W) ||
(node == anode1 && nodex == ABox.W &&
!touch1_w && nodex == BBox.E) ||
(node == anode2 && nodex == ABox.W &&
!touch2_w && nodex == BBox.E)) {
G_debug(3,
"lines %d and %d touching by end nodes only -> no intersection",
aline, bline);
continue;
}
}
}
AXLines = NULL;
BXLines = NULL;
Vect_line_intersection(APoints, BPoints, &AXLines, &BXLines,
&naxlines, &nbxlines, 0);
G_debug(3, " naxlines = %d nbxlines = %d", naxlines, nbxlines);
/* This part handles a special case when aline == bline, no other intersection was found
* and the line is forming collapsed loop, for example 0,0;1,0;0,0 should be broken at 1,0.
* ---> */
if (aline == bline && naxlines == 0 && nbxlines == 0 &&
APoints->n_points >= 3) {
int centre;
int i;
G_debug(3, " Check collapsed loop");
if (APoints->n_points % 2) { /* odd number of vertices */
centre = APoints->n_points / 2; /* index of centre */
if (APoints->x[centre - 1] == APoints->x[centre + 1] && APoints->y[centre - 1] == APoints->y[centre + 1] && APoints->z[centre - 1] == APoints->z[centre + 1]) { /* -> break */
AXLines =
(struct line_pnts **)G_malloc(2 *
sizeof(struct
line_pnts
*));
AXLines[0] = Vect_new_line_struct();
AXLines[1] = Vect_new_line_struct();
for (i = 0; i <= centre; i++)
Vect_append_point(AXLines[0], APoints->x[i],
APoints->y[i], APoints->z[i]);
for (i = centre; i < APoints->n_points; i++)
Vect_append_point(AXLines[1], APoints->x[i],
APoints->y[i], APoints->z[i]);
naxlines = 2;
}
}
}
/* <--- */
if (Err) { /* array for intersections (more than needed */
xx = (double *)G_malloc((naxlines + nbxlines) *
sizeof(double));
yx = (double *)G_malloc((naxlines + nbxlines) *
sizeof(double));
zx = (double *)G_malloc((naxlines + nbxlines) *
sizeof(double));
}
nx = 0; /* number of intersections to be written to Err */
if (naxlines > 0) { /* intersection -> write out */
Vect_delete_line(Map, aline);
for (k = 0; k < naxlines; k++) {
/* Write new line segments */
/* line may collapse, don't write zero length lines */
Vect_line_prune(AXLines[k]);
if ((atype & GV_POINTS) || AXLines[k]->n_points > 1) {
ret = Vect_write_line(Map, atype, AXLines[k], ACats);
if (List_ref) {
Vect_list_append(List_ref, ret);
}
G_debug(3, "Line %d written, npoints = %d", ret,
AXLines[k]->n_points);
if (List_break) {
Vect_list_append(List_break, ret);
}
}
/* Write intersection points */
if (Err) {
if (k > 0) {
xx[nx] = AXLines[k]->x[0];
yx[nx] = AXLines[k]->y[0];
zx[nx] = AXLines[k]->z[0];
nx++;
}
}
Vect_destroy_line_struct(AXLines[k]);
}
nbreaks += naxlines - 1;
}
if (AXLines)
G_free(AXLines);
if (nbxlines > 0) {
if (aline != bline) { /* Self intersection, do not write twice, TODO: is it OK? */
Vect_delete_line(Map, bline);
for (k = 0; k < nbxlines; k++) {
/* Write new line segments */
/* line may collapse, don't write zero length lines */
Vect_line_prune(BXLines[k]);
if ((btype & GV_POINTS) || BXLines[k]->n_points > 1) {
ret =
Vect_write_line(Map, btype, BXLines[k],
BCats);
G_debug(5, "Line %d written", ret);
if (List_break) {
Vect_list_append(List_break, ret);
}
}
/* Write intersection points */
if (Err) {
if (k > 0) {
found = 0;
for (l = 0; l < nx; l++) {
if (xx[l] == BXLines[k]->x[0] &&
yx[l] == BXLines[k]->y[0] &&
zx[l] == BXLines[k]->z[0]) {
found = 1;
break;
}
}
if (!found) {
xx[nx] = BXLines[k]->x[0];
yx[nx] = BXLines[k]->y[0];
zx[nx] = BXLines[k]->z[0];
nx++;
}
}
}
Vect_destroy_line_struct(BXLines[k]);
}
nbreaks += nbxlines - 1;
}
else {
for (k = 0; k < nbxlines; k++)
Vect_destroy_line_struct(BXLines[k]);
}
}
if (BXLines)
G_free(BXLines);
if (Err) {
for (l = 0; l < nx; l++) { /* Write out errors */
Vect_reset_line(Points);
Vect_append_point(Points, xx[l], yx[l], zx[l]);
ret = Vect_write_line(Err, GV_POINT, Points, Cats);
}
G_free(xx);
G_free(yx);
G_free(zx);
}
if (naxlines > 0)
break; /* first line was broken and deleted -> take the next one */
}
if (List_break) {
nlines = List_break->n_values;
}
else {
nlines = Vect_get_num_lines(Map);
}
G_debug(3, "nlines = %d", nlines);
} /* for each line */
G_percent(nlines, nlines, 1); /* finish it */
G_verbose_message(_("Intersections: %d"), nbreaks);
Vect_destroy_line_struct(APoints);
Vect_destroy_line_struct(BPoints);
Vect_destroy_line_struct(Points);
Vect_destroy_cats_struct(ACats);
Vect_destroy_cats_struct(BCats);
Vect_destroy_cats_struct(Cats);
Vect_destroy_boxlist(List);
return nbreaks;
}
int nodes(struct Map_info *In, struct Map_info *Out, int add_cats, int nfield)
{
int i, node, nnodes, line, nlines, count, type, add_point;
double x, y, z;
struct line_pnts *Points, *Pout;
struct line_cats *Cats;
struct boxlist *List;
struct bound_box box;
int cat;
Points = Vect_new_line_struct();
Pout = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
List = Vect_new_boxlist(0);
/* Rewrite all primitives to output file */
cat = 0;
while ((type = Vect_read_next_line(In, Points, Cats)) >= 0) {
if (type == GV_POINT) {
/* Get max cat in input */
int j;
for (j = 0; j < Cats->n_cats; j++) {
if (Cats->field[j] == nfield && Cats->cat[j] > cat) {
cat = Cats->cat[j];
}
}
}
Vect_write_line(Out, type, Points, Cats);
}
cat++;
/* Go through all nodes in old map and write a new point if missing */
nnodes = Vect_get_num_nodes(In);
count = 0;
for (node = 1; node <= nnodes; node++) {
nlines = Vect_get_node_n_lines(In, node);
add_point = 0;
for (i = 0; i < nlines; i++) {
line = abs(Vect_get_node_line(In, node, i));
type = Vect_read_line(In, NULL, NULL, line);
if (type & GV_LINES) {
add_point = 1;
break;
}
}
if (add_point) {
Vect_get_node_coor(In, node, &x, &y, &z);
box.E = box.W = x;
box.N = box.S = y;
box.T = box.B = z;
Vect_select_lines_by_box(In, &box, GV_POINT, List);
add_point = List->n_values == 0;
}
if (add_point) { /* Write new point */
Vect_reset_line(Pout);
Vect_append_point(Pout, x, y, z);
Vect_reset_cats(Cats);
if (add_cats) {
Vect_cat_set(Cats, nfield, cat++);
}
Vect_write_line(Out, GV_POINT, Pout, Cats);
count++;
}
}
Vect_destroy_line_struct(Points);
Vect_destroy_line_struct(Pout);
Vect_destroy_cats_struct(Cats);
Vect_destroy_boxlist(List);
return count;
}
