static int
setup_w6692(struct w6692_hw *card)
{
u32 val;
if (!request_region(card->addr, 256, card->name)) {
pr_info("%s: config port %x-%x already in use\n", card->name,
card->addr, card->addr + 255);
return -EIO;
}
W6692Version(card);
card->bc[0].addr = card->addr;
card->bc[1].addr = card->addr + 0x40;
val = ReadW6692(card, W_ISTA);
if (debug & DEBUG_HW)
pr_notice("%s ISTA=%02x\n", card->name, val);
val = ReadW6692(card, W_IMASK);
if (debug & DEBUG_HW)
pr_notice("%s IMASK=%02x\n", card->name, val);
val = ReadW6692(card, W_D_EXIR);
if (debug & DEBUG_HW)
pr_notice("%s D_EXIR=%02x\n", card->name, val);
val = ReadW6692(card, W_D_EXIM);
if (debug & DEBUG_HW)
pr_notice("%s D_EXIM=%02x\n", card->name, val);
val = ReadW6692(card, W_D_RSTA);
if (debug & DEBUG_HW)
pr_notice("%s D_RSTA=%02x\n", card->name, val);
return 0;
}
int __init
setup_w6692(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_char found = 0;
u_char pci_irq = 0;
u_int pci_ioaddr = 0;
#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
strcpy(tmp, w6692_revision);
printk(KERN_INFO "HiSax: W6692 driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_W6692)
return (0);
#if CONFIG_PCI
if (!pci_present()) {
printk(KERN_ERR "W6692: no PCI bus present\n");
return (0);
}
while (id_list[id_idx].vendor_id) {
dev_w6692 = pci_find_device(id_list[id_idx].vendor_id,
id_list[id_idx].device_id,
dev_w6692);
if (dev_w6692) {
if (pci_enable_device(dev_w6692))
continue;
cs->subtyp = id_idx;
break;
}
id_idx++;
}
if (dev_w6692) {
found = 1;
pci_irq = dev_w6692->irq;
/* I think address 0 is allways the configuration area */
/* and address 1 is the real IO space KKe 03.09.99 */
pci_ioaddr = pci_resource_start(dev_w6692, 1);
/* USR ISDN PCI card TA need some special handling */
if (cs->subtyp == W6692_WINBOND) {
if ((W6692_SV_USR == dev_w6692->subsystem_vendor) &&
(W6692_SD_USR == dev_w6692->subsystem_device)) {
cs->subtyp = W6692_USR;
}
}
}
if (!found) {
printk(KERN_WARNING "W6692: No PCI card found\n");
return (0);
}
cs->irq = pci_irq;
if (!cs->irq) {
printk(KERN_WARNING "W6692: No IRQ for PCI card found\n");
return (0);
}
if (!pci_ioaddr) {
printk(KERN_WARNING "W6692: NO I/O Base Address found\n");
return (0);
}
cs->hw.w6692.iobase = pci_ioaddr;
printk(KERN_INFO "Found: %s %s, I/O base: 0x%x, irq: %d\n",
id_list[cs->subtyp].vendor_name, id_list[cs->subtyp].card_name,
pci_ioaddr, pci_irq);
if (check_region((cs->hw.w6692.iobase), 256)) {
printk(KERN_WARNING
"HiSax: %s I/O ports %x-%x already in use\n",
id_list[cs->subtyp].card_name,
cs->hw.w6692.iobase,
cs->hw.w6692.iobase + 255);
return (0);
} else {
request_region(cs->hw.w6692.iobase, 256,
id_list[cs->subtyp].card_name);
}
#else
printk(KERN_WARNING "HiSax: W6692 and NO_PCI_BIOS\n");
printk(KERN_WARNING "HiSax: W6692 unable to config\n");
return (0);
#endif /* CONFIG_PCI */
printk(KERN_INFO
"HiSax: %s config irq:%d I/O:%x\n",
id_list[cs->subtyp].card_name, cs->irq,
cs->hw.w6692.iobase);
cs->readW6692 = &ReadW6692;
cs->writeW6692 = &WriteW6692;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadW6692B;
cs->BC_Write_Reg = &WriteW6692B;
cs->BC_Send_Data = &W6692B_fill_fifo;
cs->cardmsg = &w6692_card_msg;
cs->irq_func = &W6692_interrupt;
cs->irq_flags |= SA_SHIRQ;
W6692Version(cs, "W6692:");
printk(KERN_INFO "W6692 ISTA=0x%X\n", ReadW6692(cs, W_ISTA));
printk(KERN_INFO "W6692 IMASK=0x%X\n", ReadW6692(cs, W_IMASK));
printk(KERN_INFO "W6692 D_EXIR=0x%X\n", ReadW6692(cs, W_D_EXIR));
printk(KERN_INFO "W6692 D_EXIM=0x%X\n", ReadW6692(cs, W_D_EXIM));
printk(KERN_INFO "W6692 D_RSTA=0x%X\n", ReadW6692(cs, W_D_RSTA));
return (1);
}
__initfunc(int setup_w6692(struct IsdnCard *card))
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_char found = 0;
u_char pci_irq = 0;
u_int pci_ioaddr = 0;
strcpy(tmp, w6692_revision);
printk(KERN_INFO "HiSax: W6692 driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_W6692)
return (0);
#if CONFIG_PCI
if (!pci_present()) {
printk(KERN_ERR "W6692: no PCI bus present\n");
return (0);
}
while (id_list[id_idx].vendor_id) {
dev_w6692 = pci_find_device(id_list[id_idx].vendor_id,
id_list[id_idx].device_id,
dev_w6692);
if (dev_w6692)
break;
id_idx++;
}
if (dev_w6692) {
found = 1;
pci_irq = dev_w6692->irq;
/* I think address 0 is allways the configuration area */
/* and address 1 is the real IO space KKe 03.09.99 */
pci_ioaddr = dev_w6692->base_address[ 1];
}
if (!found) {
printk(KERN_WARNING "W6692: No PCI card found\n");
return (0);
}
cs->irq = pci_irq;
if (!cs->irq) {
printk(KERN_WARNING "W6692: No IRQ for PCI card found\n");
return (0);
}
pci_ioaddr &= PCI_BASE_ADDRESS_IO_MASK;
if (!pci_ioaddr) {
printk(KERN_WARNING "W6692: NO I/O Base Address found\n");
return (0);
}
cs->hw.w6692.iobase = pci_ioaddr;
printk(KERN_INFO "Found: %s %s, I/O base: 0x%x, irq: %d\n",
id_list[id_idx].vendor_name, id_list[id_idx].card_name,
pci_ioaddr, dev_w6692->irq);
if (check_region((cs->hw.w6692.iobase), 256)) {
printk(KERN_WARNING
"HiSax: %s I/O ports %x-%x already in use\n",
id_list[id_idx].card_name,
cs->hw.w6692.iobase,
cs->hw.w6692.iobase + 255);
return (0);
} else {
request_region(cs->hw.w6692.iobase, 256,
id_list[id_idx].card_name);
}
#else
printk(KERN_WARNING "HiSax: W6692 and NO_PCI_BIOS\n");
printk(KERN_WARNING "HiSax: W6692 unable to config\n");
return (0);
#endif /* CONFIG_PCI */
printk(KERN_INFO
"HiSax: %s config irq:%d I/O:%x\n",
id_list[id_idx].card_name, cs->irq,
cs->hw.w6692.iobase);
cs->readW6692 = &ReadW6692;
cs->writeW6692 = &WriteW6692;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadW6692B;
cs->BC_Write_Reg = &WriteW6692B;
cs->BC_Send_Data = &W6692B_fill_fifo;
cs->cardmsg = &w6692_card_msg;
cs->irq_func = &W6692_interrupt;
W6692Version(cs, "W6692:");
printk(KERN_INFO "W6692 ISTA=0x%X\n", ReadW6692(cs, W_ISTA));
printk(KERN_INFO "W6692 IMASK=0x%X\n", ReadW6692(cs, W_IMASK));
printk(KERN_INFO "W6692 D_EXIR=0x%X\n", ReadW6692(cs, W_D_EXIR));
printk(KERN_INFO "W6692 D_EXIM=0x%X\n", ReadW6692(cs, W_D_EXIM));
printk(KERN_INFO "W6692 D_RSTA=0x%X\n", ReadW6692(cs, W_D_RSTA));
return (1);
}
