DWORD PCIE_SW_IntDisable(WDC_DEVICE_HANDLE hDev)
{
DWORD dwStatus;
PWDC_DEVICE pDev = (PWDC_DEVICE)hDev;
PPCIE_SW_DEV_CTX pDevCtx;
TraceLog("PCIE_SW_IntDisable entered. Device handle: 0x%p\n", hDev);
if (!IsValidDevice(pDev, "PCIE_SW_IntDisable"))
return WD_INVALID_PARAMETER;
pDevCtx = (PPCIE_SW_DEV_CTX)WDC_GetDevContext(pDev);
if (!WDC_IntIsEnabled(hDev))
{
ErrLog("Interrupts are already disabled ...\n");
return WD_OPERATION_ALREADY_DONE;
}
/* TODO: You can add code here to write to the device in order
to physically disable the hardware interrupts */
/* Disable the interrupts */
dwStatus = WDC_IntDisable(hDev);
if (WD_STATUS_SUCCESS != dwStatus)
{
ErrLog("Failed disabling interrupts. Error 0x%lx - %s\n",
dwStatus, Stat2Str(dwStatus));
}
return dwStatus;
}
DWORD PCIE_SW_IntEnable(WDC_DEVICE_HANDLE hDev, PCIE_SW_INT_HANDLER funcIntHandler)
{
DWORD dwStatus;
PWDC_DEVICE pDev = (PWDC_DEVICE)hDev;
PPCIE_SW_DEV_CTX pDevCtx;
TraceLog("PCIE_SW_IntEnable entered. Device handle: 0x%p\n", hDev);
if (!IsValidDevice(pDev, "PCIE_SW_IntEnable"))
return WD_INVALID_PARAMETER;
if (!IsItemExists(pDev, ITEM_INTERRUPT))
return WD_OPERATION_FAILED;
pDevCtx = (PPCIE_SW_DEV_CTX)WDC_GetDevContext(pDev);
/* Check if interrupts are already enabled */
if (WDC_IntIsEnabled(hDev))
{
ErrLog("Interrupts are already enabled ...\n");
return WD_OPERATION_ALREADY_DONE;
}
/* Define the number of interrupt transfer commands to use */
#define NUM_TRANS_CMDS 0
/* NOTE: In order to correctly handle PCI interrupts, you need to
ADD CODE HERE to set up transfer commands to read/write the
relevant register(s) in order to correctly acknowledge the
interrupts, as dictated by your hardware's specifications.
When adding transfer commands, be sure to also modify the
definition of NUM_TRANS_CMDS (above) accordingly. */
/* Store the diag interrupt handler routine, which will be executed by
PCIE_SW_IntHandler() when an interrupt is received */
pDevCtx->funcDiagIntHandler = funcIntHandler;
/* Enable the interrupts */
/* NOTE: When adding read transfer commands, set the INTERRUPT_CMD_COPY flag
in the 4th argument (dwOptions) passed to WDC_IntEnable() */
dwStatus = WDC_IntEnable(hDev, NULL, 0, 0,
PCIE_SW_IntHandler, (PVOID)pDev, WDC_IS_KP(hDev));
if (WD_STATUS_SUCCESS != dwStatus)
{
ErrLog("Failed enabling interrupts. Error 0x%lx - %s\n",
dwStatus, Stat2Str(dwStatus));
return dwStatus;
}
/* TODO: You can add code here to write to the device in order
to physically enable the hardware interrupts */
TraceLog("PCIE_SW_IntEnable: Interrupts enabled\n");
return WD_STATUS_SUCCESS;
}
/* -----------------------------------------------
Plug-and-play and power management events
----------------------------------------------- */
static void PCIE_SW_EventHandler(WD_EVENT *pEvent, PVOID pData)
{
PWDC_DEVICE pDev = (PWDC_DEVICE)pData;
PPCIE_SW_DEV_CTX pDevCtx = (PPCIE_SW_DEV_CTX)WDC_GetDevContext(pDev);
TraceLog("PCIE_SW_EventHandler entered, pData: 0x%p, dwAction 0x%lx\n",
pData, pEvent->dwAction);
/* Execute the diagnostics application's event handler function */
pDevCtx->funcDiagEventHandler((WDC_DEVICE_HANDLE)pDev, pEvent->dwAction);
}
static inline BOOL IsValidDevice(PWDC_DEVICE pDev, const CHAR *sFunc)
{
if (!pDev || !WDC_GetDevContext(pDev))
{
snprintf(gsPCIE_SW_LastErr, sizeof(gsPCIE_SW_LastErr) - 1, "%s: NULL device %s\n",
sFunc, !pDev ? "handle" : "context");
ErrLog(gsPCIE_SW_LastErr);
return FALSE;
}
return TRUE;
}
DWORD EDEN_IntEnable(WDC_DEVICE_HANDLE hDev, EDEN_INT_HANDLER funcIntHandler)
{
DWORD dwStatus;
PWDC_DEVICE pDev = (PWDC_DEVICE)hDev;
PEDEN_DEV_CTX pDevCtx;
TraceLog("EDEN_IntEnable entered. Device handle: 0x%p\n", hDev);
if (!IsValidDevice(pDev, "EDEN_IntEnable"))
return WD_INVALID_PARAMETER;
if (!IsItemExists(pDev, ITEM_INTERRUPT))
return WD_OPERATION_FAILED;
pDevCtx = (PEDEN_DEV_CTX)WDC_GetDevContext(pDev);
/* Check if interrupts are already enabled */
if (WDC_IntIsEnabled(hDev))
{
ErrLog("Interrupts are already enabled ...\n");
return WD_OPERATION_ALREADY_DONE;
}
/* Store the diag interrupt handler routine, which will be executed by
EDEN_IntHandler() when an interrupt is received */
pDevCtx->funcDiagIntHandler = funcIntHandler;
/* Enable the interrupts */
/* NOTE: When adding read transfer commands, set the INTERRUPT_CMD_COPY flag
in the 4th argument (dwOptions) passed to WDC_IntEnable() */
dwStatus = WDC_IntEnable(hDev, NULL, 0, 0,
EDEN_IntHandler, (PVOID)pDev, WDC_IS_KP(hDev));
if (WD_STATUS_SUCCESS != dwStatus)
{
ErrLog("Failed enabling interrupts. Error 0x%lx - %s\n",
dwStatus, Stat2Str(dwStatus));
return dwStatus;
}
/* TODO: You can add code here to write to the device in order
to physically enable the hardware interrupts */
TraceLog("EDEN_IntEnable: Interrupts enabled\n");
return WD_STATUS_SUCCESS;
}
/* -----------------------------------------------
Interrupts
----------------------------------------------- */
static void DLLCALLCONV PCIE_SW_IntHandler(PVOID pData)
{
PWDC_DEVICE pDev = (PWDC_DEVICE)pData;
PPCIE_SW_DEV_CTX pDevCtx = (PPCIE_SW_DEV_CTX)WDC_GetDevContext(pDev);
PCIE_SW_INT_RESULT intResult;
BZERO(intResult);
intResult.dwCounter = pDev->Int.dwCounter;
intResult.dwLost = pDev->Int.dwLost;
intResult.waitResult = (WD_INTERRUPT_WAIT_RESULT)pDev->Int.fStopped;
intResult.dwEnabledIntType = WDC_GET_ENABLED_INT_TYPE(pDev);
intResult.dwLastMessage = WDC_GET_ENABLED_INT_LAST_MSG(pDev);
/* Execute the diagnostics application's interrupt handler routine */
pDevCtx->funcDiagIntHandler((WDC_DEVICE_HANDLE)pDev, &intResult);
}
DWORD PCIE_SW_EventRegister(WDC_DEVICE_HANDLE hDev, PCIE_SW_EVENT_HANDLER funcEventHandler)
{
DWORD dwStatus;
PWDC_DEVICE pDev = (PWDC_DEVICE)hDev;
PPCIE_SW_DEV_CTX pDevCtx;
DWORD dwActions = WD_ACTIONS_ALL;
/* TODO: Modify the above to set up the plug-and-play/power management
events for which you wish to receive notifications.
dwActions can be set to any combination of the WD_EVENT_ACTION
flags defined in windrvr.h */
TraceLog("PCIE_SW_EventRegister entered. Device handle: 0x%p\n", hDev);
if (!IsValidDevice(pDev, "PCIE_SW_EventRegister"))
return WD_INVALID_PARAMETER;
pDevCtx = (PPCIE_SW_DEV_CTX)WDC_GetDevContext(pDev);
/* Check if event is already registered */
if (WDC_EventIsRegistered(hDev))
{
ErrLog("Events are already registered ...\n");
return WD_OPERATION_ALREADY_DONE;
}
/* Store the diag event handler routine to be executed from PCIE_SW_EventHandler() upon an event */
pDevCtx->funcDiagEventHandler = funcEventHandler;
/* Register event */
dwStatus = WDC_EventRegister(hDev, dwActions, PCIE_SW_EventHandler, hDev, FALSE);
if (WD_STATUS_SUCCESS != dwStatus)
{
ErrLog("Failed to register events. Error 0x%lx - %s\n",
dwStatus, Stat2Str(dwStatus));
return dwStatus;
}
TraceLog("Events registered\n");
return WD_STATUS_SUCCESS;
}
BOOL PCIE_SW_DeviceClose(WDC_DEVICE_HANDLE hDev)
{
DWORD dwStatus;
PWDC_DEVICE pDev = (PWDC_DEVICE)hDev;
PPCIE_SW_DEV_CTX pDevCtx;
TraceLog("PCIE_SW_DeviceClose entered. Device handle: 0x%p\n", hDev);
if (!hDev)
{
ErrLog("PCIE_SW_DeviceClose: Error - NULL device handle\n");
return FALSE;
}
pDevCtx = (PPCIE_SW_DEV_CTX)WDC_GetDevContext(pDev);
/* Disable interrupts */
if (WDC_IntIsEnabled(hDev))
{
dwStatus = PCIE_SW_IntDisable(hDev);
if (WD_STATUS_SUCCESS != dwStatus)
{
ErrLog("Failed disabling interrupts. Error 0x%lx - %s\n",
dwStatus, Stat2Str(dwStatus));
}
}
/* Close the device */
dwStatus = WDC_PciDeviceClose(hDev);
if (WD_STATUS_SUCCESS != dwStatus)
{
ErrLog("Failed closing a WDC device handle (0x%p). Error 0x%lx - %s\n",
hDev, dwStatus, Stat2Str(dwStatus));
}
/* Free PCIE_SW device context memory */
if (pDevCtx)
free (pDevCtx);
return (WD_STATUS_SUCCESS == dwStatus);
}
