/*
 * This gets called when the inode's version needs to be changed from 1 to 2.
 * Currently this happens when the nlink field overflows the old 16-bit value
 * or when chproj is called to change the project for the first time.
 * As a side effect the superblock version will also get rev'd
 * to contain the NLINK bit.
 */
void
xfs_bump_ino_vers2(
	xfs_trans_t	*tp,
	xfs_inode_t	*ip)
{
	xfs_mount_t	*mp;
	unsigned long		s;

	ASSERT(ismrlocked (&ip->i_lock, MR_UPDATE));
	ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1);

	ip->i_d.di_version = XFS_DINODE_VERSION_2;
	ip->i_d.di_onlink = 0;
	memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
	mp = tp->t_mountp;
	if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
		s = XFS_SB_LOCK(mp);
		if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
			XFS_SB_VERSION_ADDNLINK(&mp->m_sb);
			XFS_SB_UNLOCK(mp, s);
			xfs_mod_sb(tp, XFS_SB_VERSIONNUM);
		} else {
			XFS_SB_UNLOCK(mp, s);
		}
	}
	/* Caller must log the inode */
}
Esempio n. 2
0
int
xfs_sb_version_hasnlink(xfs_sb_t *sbp)
{
    return XFS_SB_VERSION_HASNLINK(sbp);
}
Esempio n. 3
0
/*
 * This is called to fill in the vector of log iovecs for the
 * given inode log item.  It fills the first item with an inode
 * log format structure, the second with the on-disk inode structure,
 * and a possible third and/or fourth with the inode data/extents/b-tree
 * root and inode attributes data/extents/b-tree root.
 */
STATIC void
xfs_inode_item_format(
	xfs_inode_log_item_t	*iip,
	xfs_log_iovec_t		*log_vector)
{
	uint			nvecs;
	xfs_log_iovec_t		*vecp;
	xfs_inode_t		*ip;
	size_t			data_bytes;
	xfs_bmbt_rec_t		*ext_buffer;
	int			nrecs;
	xfs_mount_t		*mp;

	ip = iip->ili_inode;
	vecp = log_vector;

	vecp->i_addr = (xfs_caddr_t)&iip->ili_format;
	vecp->i_len  = sizeof(xfs_inode_log_format_t);
	vecp++;
	nvecs	     = 1;

	/*
	 * Clear i_update_core if the timestamps (or any other
	 * non-transactional modification) need flushing/logging
	 * and we're about to log them with the rest of the core.
	 *
	 * This is the same logic as xfs_iflush() but this code can't
	 * run at the same time as xfs_iflush because we're in commit
	 * processing here and so we have the inode lock held in
	 * exclusive mode.  Although it doesn't really matter
	 * for the timestamps if both routines were to grab the
	 * timestamps or not.  That would be ok.
	 *
	 * We clear i_update_core before copying out the data.
	 * This is for coordination with our timestamp updates
	 * that don't hold the inode lock. They will always
	 * update the timestamps BEFORE setting i_update_core,
	 * so if we clear i_update_core after they set it we
	 * are guaranteed to see their updates to the timestamps
	 * either here.  Likewise, if they set it after we clear it
	 * here, we'll see it either on the next commit of this
	 * inode or the next time the inode gets flushed via
	 * xfs_iflush().  This depends on strongly ordered memory
	 * semantics, but we have that.  We use the SYNCHRONIZE
	 * macro to make sure that the compiler does not reorder
	 * the i_update_core access below the data copy below.
	 */
	if (ip->i_update_core)  {
		ip->i_update_core = 0;
		SYNCHRONIZE();
	}

	/*
	 * We don't have to worry about re-ordering here because
	 * the update_size field is protected by the inode lock
	 * and we have that held in exclusive mode.
	 */
	if (ip->i_update_size)
		ip->i_update_size = 0;

	vecp->i_addr = (xfs_caddr_t)&ip->i_d;
	vecp->i_len  = sizeof(xfs_dinode_core_t);
	vecp++;
	nvecs++;
	iip->ili_format.ilf_fields |= XFS_ILOG_CORE;

	/*
	 * If this is really an old format inode, then we need to
	 * log it as such.  This means that we have to copy the link
	 * count from the new field to the old.  We don't have to worry
	 * about the new fields, because nothing trusts them as long as
	 * the old inode version number is there.  If the superblock already
	 * has a new version number, then we don't bother converting back.
	 */
	mp = ip->i_mount;
	ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
	       XFS_SB_VERSION_HASNLINK(&mp->m_sb));
	if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
		if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
			/*
			 * Convert it back.
			 */
			ASSERT(ip->i_d.di_nlink <= XFS_MAXLINK_1);
			ip->i_d.di_onlink = ip->i_d.di_nlink;
		} else {
			/*
			 * The superblock version has already been bumped,
			 * so just make the conversion to the new inode
			 * format permanent.
			 */
			ip->i_d.di_version = XFS_DINODE_VERSION_2;
			ip->i_d.di_onlink = 0;
			memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
		}
	}

	switch (ip->i_d.di_format) {
	case XFS_DINODE_FMT_EXTENTS:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_DDATA | XFS_ILOG_DBROOT |
			  XFS_ILOG_DEV | XFS_ILOG_UUID)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_DEXT) {
			ASSERT(ip->i_df.if_bytes > 0);
			ASSERT(ip->i_df.if_u1.if_extents != NULL);
			ASSERT(ip->i_d.di_nextents > 0);
			ASSERT(iip->ili_extents_buf == NULL);
			nrecs = ip->i_df.if_bytes /
				(uint)sizeof(xfs_bmbt_rec_t);
			ASSERT(nrecs > 0);
#if __BYTE_ORDER == __BIG_ENDIAN
			if (nrecs == ip->i_d.di_nextents) {
				/*
				 * There are no delayed allocation
				 * extents, so just point to the
				 * real extents array.
				 */
				vecp->i_addr =
					(char *)(ip->i_df.if_u1.if_extents);
				vecp->i_len = ip->i_df.if_bytes;
			} else
#endif
			{
				/*
				 * There are delayed allocation extents
				 * in the inode, or we need to convert
				 * the extents to on disk format.
				 * Use xfs_iextents_copy()
				 * to copy only the real extents into
				 * a separate buffer.  We'll free the
				 * buffer in the unlock routine.
				 */
				ext_buffer = kmem_alloc(ip->i_df.if_bytes,
					KM_SLEEP);
				iip->ili_extents_buf = ext_buffer;
				vecp->i_addr = (xfs_caddr_t)ext_buffer;
				vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
						XFS_DATA_FORK);
			}
			ASSERT(vecp->i_len <= ip->i_df.if_bytes);
			iip->ili_format.ilf_dsize = vecp->i_len;
			vecp++;
			nvecs++;
		}
		break;

	case XFS_DINODE_FMT_BTREE:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_DDATA | XFS_ILOG_DEXT |
			  XFS_ILOG_DEV | XFS_ILOG_UUID)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_DBROOT) {
			ASSERT(ip->i_df.if_broot_bytes > 0);
			ASSERT(ip->i_df.if_broot != NULL);
			vecp->i_addr = (xfs_caddr_t)ip->i_df.if_broot;
			vecp->i_len = ip->i_df.if_broot_bytes;
			vecp++;
			nvecs++;
			iip->ili_format.ilf_dsize = ip->i_df.if_broot_bytes;
		}
		break;

	case XFS_DINODE_FMT_LOCAL:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_DBROOT | XFS_ILOG_DEXT |
			  XFS_ILOG_DEV | XFS_ILOG_UUID)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_DDATA) {
			ASSERT(ip->i_df.if_bytes > 0);
			ASSERT(ip->i_df.if_u1.if_data != NULL);
			ASSERT(ip->i_d.di_size > 0);

			vecp->i_addr = (xfs_caddr_t)ip->i_df.if_u1.if_data;
			/*
			 * Round i_bytes up to a word boundary.
			 * The underlying memory is guaranteed to
			 * to be there by xfs_idata_realloc().
			 */
			data_bytes = roundup(ip->i_df.if_bytes, 4);
			ASSERT((ip->i_df.if_real_bytes == 0) ||
			       (ip->i_df.if_real_bytes == data_bytes));
			vecp->i_len = (int)data_bytes;
			vecp++;
			nvecs++;
			iip->ili_format.ilf_dsize = (unsigned)data_bytes;
		}
		break;

	case XFS_DINODE_FMT_DEV:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_DBROOT | XFS_ILOG_DEXT |
			  XFS_ILOG_DDATA | XFS_ILOG_UUID)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_DEV) {
			iip->ili_format.ilf_u.ilfu_rdev =
				ip->i_df.if_u2.if_rdev;
		}
		break;

	case XFS_DINODE_FMT_UUID:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_DBROOT | XFS_ILOG_DEXT |
			  XFS_ILOG_DDATA | XFS_ILOG_DEV)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_UUID) {
			iip->ili_format.ilf_u.ilfu_uuid =
				ip->i_df.if_u2.if_uuid;
		}
		break;

	default:
		ASSERT(0);
		break;
	}

	/*
	 * If there are no attributes associated with the file,
	 * then we're done.
	 * Assert that no attribute-related log flags are set.
	 */
	if (!XFS_IFORK_Q(ip)) {
		ASSERT(nvecs == iip->ili_item.li_desc->lid_size);
		iip->ili_format.ilf_size = nvecs;
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_ADATA | XFS_ILOG_ABROOT | XFS_ILOG_AEXT)));
		return;
	}

	switch (ip->i_d.di_aformat) {
	case XFS_DINODE_FMT_EXTENTS:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_ADATA | XFS_ILOG_ABROOT)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_AEXT) {
			ASSERT(ip->i_afp->if_bytes > 0);
			ASSERT(ip->i_afp->if_u1.if_extents != NULL);
			ASSERT(ip->i_d.di_anextents > 0);
#ifdef DEBUG
			nrecs = ip->i_afp->if_bytes /
				(uint)sizeof(xfs_bmbt_rec_t);
#endif
			ASSERT(nrecs > 0);
			ASSERT(nrecs == ip->i_d.di_anextents);
#if __BYTE_ORDER == __BIG_ENDIAN
			/*
			 * There are not delayed allocation extents
			 * for attributes, so just point at the array.
			 */
			vecp->i_addr = (char *)(ip->i_afp->if_u1.if_extents);
			vecp->i_len = ip->i_afp->if_bytes;
#else
			ASSERT(iip->ili_aextents_buf == NULL);
			/*
			 * Need to endian flip before logging
			 */
			ext_buffer = kmem_alloc(ip->i_afp->if_bytes,
				KM_SLEEP);
			iip->ili_aextents_buf = ext_buffer;
			vecp->i_addr = (xfs_caddr_t)ext_buffer;
			vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
					XFS_ATTR_FORK);
#endif
			iip->ili_format.ilf_asize = vecp->i_len;
			vecp++;
			nvecs++;
		}
		break;

	case XFS_DINODE_FMT_BTREE:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_ADATA | XFS_ILOG_AEXT)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_ABROOT) {
			ASSERT(ip->i_afp->if_broot_bytes > 0);
			ASSERT(ip->i_afp->if_broot != NULL);
			vecp->i_addr = (xfs_caddr_t)ip->i_afp->if_broot;
			vecp->i_len = ip->i_afp->if_broot_bytes;
			vecp++;
			nvecs++;
			iip->ili_format.ilf_asize = ip->i_afp->if_broot_bytes;
		}
		break;

	case XFS_DINODE_FMT_LOCAL:
		ASSERT(!(iip->ili_format.ilf_fields &
			 (XFS_ILOG_ABROOT | XFS_ILOG_AEXT)));
		if (iip->ili_format.ilf_fields & XFS_ILOG_ADATA) {
			ASSERT(ip->i_afp->if_bytes > 0);
			ASSERT(ip->i_afp->if_u1.if_data != NULL);

			vecp->i_addr = (xfs_caddr_t)ip->i_afp->if_u1.if_data;
			/*
			 * Round i_bytes up to a word boundary.
			 * The underlying memory is guaranteed to
			 * to be there by xfs_idata_realloc().
			 */
			data_bytes = roundup(ip->i_afp->if_bytes, 4);
			ASSERT((ip->i_afp->if_real_bytes == 0) ||
			       (ip->i_afp->if_real_bytes == data_bytes));
			vecp->i_len = (int)data_bytes;
			vecp++;
			nvecs++;
			iip->ili_format.ilf_asize = (unsigned)data_bytes;
		}
		break;

	default:
		ASSERT(0);
		break;
	}

	ASSERT(nvecs == iip->ili_item.li_desc->lid_size);
	iip->ili_format.ilf_size = nvecs;
}
Esempio n. 4
0
/*
 * Allocate new inodes in the allocation group specified by agbp.
 * Return 0 for success, else error code.
 */
STATIC int				/* error code or 0 */
xfs_ialloc_ag_alloc(
	xfs_trans_t	*tp,		/* transaction pointer */
	xfs_buf_t	*agbp,		/* alloc group buffer */
	int		*alloc)
{
	xfs_agi_t	*agi;		/* allocation group header */
	xfs_alloc_arg_t	args;		/* allocation argument structure */
	int		blks_per_cluster;  /* fs blocks per inode cluster */
	xfs_btree_cur_t	*cur;		/* inode btree cursor */
	xfs_daddr_t	d;		/* disk addr of buffer */
	int		error;
	xfs_buf_t	*fbuf;		/* new free inodes' buffer */
	xfs_dinode_t	*free;		/* new free inode structure */
	int		i;		/* inode counter */
	int		j;		/* block counter */
	int		nbufs;		/* num bufs of new inodes */
	xfs_agino_t	newino;		/* new first inode's number */
	xfs_agino_t	newlen;		/* new number of inodes */
	int		ninodes;	/* num inodes per buf */
	xfs_agino_t	thisino;	/* current inode number, for loop */
	int		version;	/* inode version number to use */
	int		isaligned = 0;	/* inode allocation at stripe unit */
					/* boundary */

	args.tp = tp;
	args.mp = tp->t_mountp;

	/*
	 * Locking will ensure that we don't have two callers in here
	 * at one time.
	 */
	newlen = XFS_IALLOC_INODES(args.mp);
	if (args.mp->m_maxicount &&
	    args.mp->m_sb.sb_icount + newlen > args.mp->m_maxicount)
		return XFS_ERROR(ENOSPC);
	args.minlen = args.maxlen = XFS_IALLOC_BLOCKS(args.mp);
	/*
	 * First try to allocate inodes contiguous with the last-allocated
	 * chunk of inodes.  If the filesystem is striped, this will fill
	 * an entire stripe unit with inodes.
 	 */
	agi = XFS_BUF_TO_AGI(agbp);
	newino = be32_to_cpu(agi->agi_newino);
	args.agbno = XFS_AGINO_TO_AGBNO(args.mp, newino) +
			XFS_IALLOC_BLOCKS(args.mp);
	if (likely(newino != NULLAGINO &&
		  (args.agbno < be32_to_cpu(agi->agi_length)))) {
		args.fsbno = XFS_AGB_TO_FSB(args.mp,
				be32_to_cpu(agi->agi_seqno), args.agbno);
		args.type = XFS_ALLOCTYPE_THIS_BNO;
		args.mod = args.total = args.wasdel = args.isfl =
			args.userdata = args.minalignslop = 0;
		args.prod = 1;
		args.alignment = 1;
		/*
		 * Allow space for the inode btree to split.
		 */
		args.minleft = XFS_IN_MAXLEVELS(args.mp) - 1;
		if ((error = xfs_alloc_vextent(&args)))
			return error;
	} else
		args.fsbno = NULLFSBLOCK;

	if (unlikely(args.fsbno == NULLFSBLOCK)) {
		/*
		 * Set the alignment for the allocation.
		 * If stripe alignment is turned on then align at stripe unit
		 * boundary.
		 * If the cluster size is smaller than a filesystem block
		 * then we're doing I/O for inodes in filesystem block size
		 * pieces, so don't need alignment anyway.
		 */
		isaligned = 0;
		if (args.mp->m_sinoalign) {
			ASSERT(!(args.mp->m_flags & XFS_MOUNT_NOALIGN));
			args.alignment = args.mp->m_dalign;
			isaligned = 1;
		} else if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
			   args.mp->m_sb.sb_inoalignmt >=
			   XFS_B_TO_FSBT(args.mp,
			  	XFS_INODE_CLUSTER_SIZE(args.mp)))
				args.alignment = args.mp->m_sb.sb_inoalignmt;
		else
			args.alignment = 1;
		/*
		 * Need to figure out where to allocate the inode blocks.
		 * Ideally they should be spaced out through the a.g.
		 * For now, just allocate blocks up front.
		 */
		args.agbno = be32_to_cpu(agi->agi_root);
		args.fsbno = XFS_AGB_TO_FSB(args.mp,
				be32_to_cpu(agi->agi_seqno), args.agbno);
		/*
		 * Allocate a fixed-size extent of inodes.
		 */
		args.type = XFS_ALLOCTYPE_NEAR_BNO;
		args.mod = args.total = args.wasdel = args.isfl =
			args.userdata = args.minalignslop = 0;
		args.prod = 1;
		/*
		 * Allow space for the inode btree to split.
		 */
		args.minleft = XFS_IN_MAXLEVELS(args.mp) - 1;
		if ((error = xfs_alloc_vextent(&args)))
			return error;
	}

	/*
	 * If stripe alignment is turned on, then try again with cluster
	 * alignment.
	 */
	if (isaligned && args.fsbno == NULLFSBLOCK) {
		args.type = XFS_ALLOCTYPE_NEAR_BNO;
		args.agbno = be32_to_cpu(agi->agi_root);
		args.fsbno = XFS_AGB_TO_FSB(args.mp,
				be32_to_cpu(agi->agi_seqno), args.agbno);
		if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
			args.mp->m_sb.sb_inoalignmt >=
			XFS_B_TO_FSBT(args.mp, XFS_INODE_CLUSTER_SIZE(args.mp)))
				args.alignment = args.mp->m_sb.sb_inoalignmt;
		else
			args.alignment = 1;
		if ((error = xfs_alloc_vextent(&args)))
			return error;
	}

	if (args.fsbno == NULLFSBLOCK) {
		*alloc = 0;
		return 0;
	}
	ASSERT(args.len == args.minlen);
	/*
	 * Convert the results.
	 */
	newino = XFS_OFFBNO_TO_AGINO(args.mp, args.agbno, 0);
	/*
	 * Loop over the new block(s), filling in the inodes.
	 * For small block sizes, manipulate the inodes in buffers
	 * which are multiples of the blocks size.
	 */
	if (args.mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(args.mp)) {
		blks_per_cluster = 1;
		nbufs = (int)args.len;
		ninodes = args.mp->m_sb.sb_inopblock;
	} else {
		blks_per_cluster = XFS_INODE_CLUSTER_SIZE(args.mp) /
				   args.mp->m_sb.sb_blocksize;
		nbufs = (int)args.len / blks_per_cluster;
		ninodes = blks_per_cluster * args.mp->m_sb.sb_inopblock;
	}
	/*
	 * Figure out what version number to use in the inodes we create.
	 * If the superblock version has caught up to the one that supports
	 * the new inode format, then use the new inode version.  Otherwise
	 * use the old version so that old kernels will continue to be
	 * able to use the file system.
	 */
	if (XFS_SB_VERSION_HASNLINK(&args.mp->m_sb))
		version = XFS_DINODE_VERSION_2;
	else
		version = XFS_DINODE_VERSION_1;

	for (j = 0; j < nbufs; j++) {
		/*
		 * Get the block.
		 */
		d = XFS_AGB_TO_DADDR(args.mp, be32_to_cpu(agi->agi_seqno),
				     args.agbno + (j * blks_per_cluster));
		fbuf = xfs_trans_get_buf(tp, args.mp->m_ddev_targp, d,
					 args.mp->m_bsize * blks_per_cluster,
					 XFS_BUF_LOCK);
		ASSERT(fbuf);
		ASSERT(!XFS_BUF_GETERROR(fbuf));
		/*
		 * Set initial values for the inodes in this buffer.
		 */
		xfs_biozero(fbuf, 0, ninodes << args.mp->m_sb.sb_inodelog);
		for (i = 0; i < ninodes; i++) {
			free = XFS_MAKE_IPTR(args.mp, fbuf, i);
			INT_SET(free->di_core.di_magic, ARCH_CONVERT, XFS_DINODE_MAGIC);
			INT_SET(free->di_core.di_version, ARCH_CONVERT, version);
			INT_SET(free->di_next_unlinked, ARCH_CONVERT, NULLAGINO);
			xfs_ialloc_log_di(tp, fbuf, i,
				XFS_DI_CORE_BITS | XFS_DI_NEXT_UNLINKED);
		}
		xfs_trans_inode_alloc_buf(tp, fbuf);
	}
	be32_add(&agi->agi_count, newlen);
	be32_add(&agi->agi_freecount, newlen);
	down_read(&args.mp->m_peraglock);
	args.mp->m_perag[be32_to_cpu(agi->agi_seqno)].pagi_freecount += newlen;
	up_read(&args.mp->m_peraglock);
	agi->agi_newino = cpu_to_be32(newino);
	/*
	 * Insert records describing the new inode chunk into the btree.
	 */
	cur = xfs_btree_init_cursor(args.mp, tp, agbp,
			be32_to_cpu(agi->agi_seqno),
			XFS_BTNUM_INO, (xfs_inode_t *)0, 0);
	for (thisino = newino;
	     thisino < newino + newlen;
	     thisino += XFS_INODES_PER_CHUNK) {
		if ((error = xfs_inobt_lookup_eq(cur, thisino,
				XFS_INODES_PER_CHUNK, XFS_INOBT_ALL_FREE, &i))) {
			xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
			return error;
		}
		ASSERT(i == 0);
		if ((error = xfs_inobt_insert(cur, &i))) {
			xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
			return error;
		}
		ASSERT(i == 1);
	}
	xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
	/*
	 * Log allocation group header fields
	 */
	xfs_ialloc_log_agi(tp, agbp,
		XFS_AGI_COUNT | XFS_AGI_FREECOUNT | XFS_AGI_NEWINO);
	/*
	 * Modify/log superblock values for inode count and inode free count.
	 */
	xfs_trans_mod_sb(tp, XFS_TRANS_SB_ICOUNT, (long)newlen);
	xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, (long)newlen);
	*alloc = 1;
	return 0;
}
Esempio n. 5
0
File: util.c Progetto: crossmeta/sgi
/*
 * Writes a modified inode's changes out to the inode's on disk home.
 * Originally based on xfs_iflush_int() from xfs_inode.c in the kernel.
 */
int
libxfs_iflush_int(xfs_inode_t *ip, xfs_buf_t *bp)
{
	xfs_inode_log_item_t	*iip;
	xfs_dinode_t		*dip;
	xfs_mount_t		*mp;

	ASSERT(XFS_BUF_FSPRIVATE(bp, void *) != NULL);
	ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE ||
		ip->i_d.di_nextents > ip->i_df.if_ext_max);

	iip = ip->i_itemp;
	mp = ip->i_mount;

	/* set *dip = inode's place in the buffer */
	dip = (xfs_dinode_t *)xfs_buf_offset(bp, ip->i_boffset);

#ifdef DEBUG
	ASSERT(ip->i_d.di_magic == XFS_DINODE_MAGIC);
	if ((ip->i_d.di_mode & IFMT) == IFREG) {
		ASSERT( (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS) ||
			(ip->i_d.di_format == XFS_DINODE_FMT_BTREE) );
	}
	else if ((ip->i_d.di_mode & IFMT) == IFDIR) {
		ASSERT( (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS) ||
			(ip->i_d.di_format == XFS_DINODE_FMT_BTREE)   ||
			(ip->i_d.di_format == XFS_DINODE_FMT_LOCAL) );
	}
	ASSERT(ip->i_d.di_nextents+ip->i_d.di_anextents <= ip->i_d.di_nblocks);
	ASSERT(ip->i_d.di_forkoff <= mp->m_sb.sb_inodesize);
#endif

	/*
	 * Copy the dirty parts of the inode into the on-disk
	 * inode.  We always copy out the core of the inode,
	 * because if the inode is dirty at all the core must
	 * be.
	 */
	xfs_xlate_dinode_core((xfs_caddr_t)&(dip->di_core), &(ip->i_d), -1,
				ARCH_CONVERT);
	/*
	 * If this is really an old format inode and the superblock version
	 * has not been updated to support only new format inodes, then
	 * convert back to the old inode format.  If the superblock version
	 * has been updated, then make the conversion permanent.
	 */
	ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
		XFS_SB_VERSION_HASNLINK(&mp->m_sb));
	if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
		if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
			/*
			 * Convert it back.
			 */
			ASSERT(ip->i_d.di_nlink <= XFS_MAXLINK_1);
			INT_SET(dip->di_core.di_onlink, ARCH_CONVERT,
				ip->i_d.di_nlink);
		} else {
			/*
			 * The superblock version has already been bumped,
			 * so just make the conversion to the new inode
			 * format permanent.
			 */
			ip->i_d.di_version = XFS_DINODE_VERSION_2;
			INT_SET(dip->di_core.di_version, ARCH_CONVERT,
				XFS_DINODE_VERSION_2);
			ip->i_d.di_onlink = 0;
			INT_ZERO(dip->di_core.di_onlink, ARCH_CONVERT);
			bzero(&(ip->i_d.di_pad[0]), sizeof(ip->i_d.di_pad));
			bzero(&(dip->di_core.di_pad[0]),
				sizeof(dip->di_core.di_pad));
			ASSERT(ip->i_d.di_projid == 0);
		}
	}

	if (xfs_iflush_fork(ip, dip, iip, XFS_DATA_FORK, bp) == EFSCORRUPTED)
		return EFSCORRUPTED;
	if (XFS_IFORK_Q(ip)) {
		/* The only error from xfs_iflush_fork is on the data fork. */
		xfs_iflush_fork(ip, dip, iip, XFS_ATTR_FORK, bp);
	}

	return 0;
}
Esempio n. 6
0
File: util.c Progetto: crossmeta/sgi
/*
 * Allocate an inode on disk and return a copy of it's in-core version.
 * Set mode, nlink, and rdev appropriately within the inode.
 * The uid and gid for the inode are set according to the contents of
 * the given cred structure.
 *
 * This was once shared with the kernel, but has diverged to the point
 * where its no longer worth the hassle of maintaining common code.
 */
int
libxfs_ialloc(
	xfs_trans_t	*tp,
	xfs_inode_t	*pip,
	mode_t		mode,
	nlink_t		nlink,
	dev_t		rdev,
	cred_t		*cr,
	xfs_prid_t	prid,
	int		okalloc,
	xfs_buf_t	**ialloc_context,
	boolean_t	*call_again,
	xfs_inode_t	**ipp)
{
	xfs_ino_t	ino;
	xfs_inode_t	*ip;
	uint		flags;
	int		error;

	/*
	 * Call the space management code to pick
	 * the on-disk inode to be allocated.
	 */
	error = xfs_dialloc(tp, pip ? pip->i_ino : 0, mode, okalloc,
			    ialloc_context, call_again, &ino);
	if (error != 0)
		return error;
	if (*call_again || ino == NULLFSINO) {
		*ipp = NULL;
		return 0;
	}
	ASSERT(*ialloc_context == NULL);

	error = xfs_trans_iget(tp->t_mountp, tp, ino, 0, &ip);
	if (error != 0)
		return error;
	ASSERT(ip != NULL);

	ip->i_d.di_mode = (__uint16_t)mode;
	ip->i_d.di_onlink = 0;
	ip->i_d.di_nlink = nlink;
	ASSERT(ip->i_d.di_nlink == nlink);
	ip->i_d.di_uid = cr->cr_uid;
	ip->i_d.di_gid = cr->cr_gid;
	ip->i_d.di_projid = prid;
	bzero(&(ip->i_d.di_pad[0]), sizeof(ip->i_d.di_pad));

	/*
	 * If the superblock version is up to where we support new format
	 * inodes and this is currently an old format inode, then change
	 * the inode version number now.  This way we only do the conversion
	 * here rather than here and in the flush/logging code.
	 */
	if (XFS_SB_VERSION_HASNLINK(&tp->t_mountp->m_sb) &&
	    ip->i_d.di_version == XFS_DINODE_VERSION_1) {
		ip->i_d.di_version = XFS_DINODE_VERSION_2;
		/* old link count, projid field, pad field already zeroed */
        }

	ip->i_d.di_size = 0;
	ip->i_d.di_nextents = 0;
	ASSERT(ip->i_d.di_nblocks == 0);
	xfs_ichgtime(ip, XFS_ICHGTIME_CHG|XFS_ICHGTIME_ACC|XFS_ICHGTIME_MOD);
	/*
	 * di_gen will have been taken care of in xfs_iread.
	 */
	ip->i_d.di_extsize = 0;
	ip->i_d.di_dmevmask = 0;
	ip->i_d.di_dmstate = 0;
	ip->i_d.di_flags = 0;
	flags = XFS_ILOG_CORE;
	switch (mode & IFMT) {
	case IFIFO:
	case IFCHR:
	case IFBLK:
	case IFSOCK:
		ip->i_d.di_format = XFS_DINODE_FMT_DEV;
		ip->i_df.if_u2.if_rdev = makedev(major(rdev), minor(rdev));			ip->i_df.if_flags = 0;
		flags |= XFS_ILOG_DEV;
		break;
	case IFREG:
	case IFDIR:
	case IFLNK:
		ip->i_d.di_format = XFS_DINODE_FMT_EXTENTS;
		ip->i_df.if_flags = XFS_IFEXTENTS;
		ip->i_df.if_bytes = ip->i_df.if_real_bytes = 0;
		ip->i_df.if_u1.if_extents = NULL;
		break;
	default:
		ASSERT(0);
	}
	/* Attribute fork settings for new inode. */
	ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS;
	ip->i_d.di_anextents = 0;

	/*
	 * Log the new values stuffed into the inode.
	 */
	xfs_trans_log_inode(tp, ip, flags);
	*ipp = ip;
	return 0;
}