/**
* This function is initializes the processor and system.
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @return
* - returns the error codes described in xfsbl_error.h on any error
* - returns XFSBL_SUCCESS on success
*
*****************************************************************************/
u32 XFsbl_Initialize(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
u32 ResetReason;
ResetReason = XFsbl_GetResetReason();
if (ResetReason == PS_ONLY_RESET) {
FsblInstancePtr->ResetReason = PS_ONLY_RESET;
}
/**
* Configure the system as in PSU
*/
Status = XFsbl_SystemInit(FsblInstancePtr);
if (XFSBL_SUCCESS != Status) {
goto END;
}
/**
* Print the FSBL banner
*/
XFsbl_PrintFsblBanner();
/* Do ECC Initialization of DDR if required */
Status = XFsbl_DdrEccInit();
if (XFSBL_SUCCESS != Status) {
goto END;
}
/* Do board specific initialization if any */
Status = XFsbl_BoardInit();
if (XFSBL_SUCCESS != Status) {
goto END;
}
/**
* Initialize the processor
*/
Status = XFsbl_ProcessorInit(FsblInstancePtr);
if (XFSBL_SUCCESS != Status) {
goto END;
}
/**
* Validate the reset reason
*/
Status = XFsbl_ResetValidation(FsblInstancePtr);
if (XFSBL_SUCCESS != Status) {
goto END;
}
XFsbl_Printf(DEBUG_INFO,"Processor Initialization Done \n\r");
END:
return Status;
}
void XFsbl_PrintFsblBanner(void )
{
/**
* Print the FSBL Banner
*/
XFsbl_Printf(DEBUG_PRINT_ALWAYS,
"Xilinx Zynq MP First Stage Boot Loader \n\r");
XFsbl_Printf(DEBUG_PRINT_ALWAYS,
"Release %d.%d %s - %s\r\n",
SDK_RELEASE_YEAR, SDK_RELEASE_QUARTER,__DATE__,__TIME__);
/**
* Print the platform
*/
if (XFSBL_PLATFORM == XFSBL_PLATFORM_QEMU)
{
XFsbl_Printf(DEBUG_GENERAL, "Platform: QEMU, ");
} else if (XFSBL_PLATFORM == XFSBL_PLATFORM_REMUS)
{
XFsbl_Printf(DEBUG_GENERAL, "Platform: REMUS, ");
} else if (XFSBL_PLATFORM == XFSBL_PLATFORM_SILICON)
{
XFsbl_Printf(DEBUG_GENERAL, "Platform: Silicon, ");
} else {
XFsbl_Printf(DEBUG_GENERAL, "Platform Not identified \r\n");
}
return ;
}
/**
*
*
*
* @param None
*
* @return None
*
******************************************************************************/
void XFsbl_MakeSdFileName(char *XFsbl_SdEmmcFileName,
u32 MultibootReg, u32 DrvNum)
{
u32 Index;
u32 Value;
u32 FileNameLen;
u32 MultiBootNum = MultibootReg;
if (0x0U == MultiBootNum)
{
/* SD file name is BOOT.BIN when Multiboot register value is 0 */
if (DrvNum == XFSBL_SD_DRV_NUM_0) {
(void)XFsbl_Strcpy(XFsbl_SdEmmcFileName, "BOOT.BIN");
}
else {
/* For second SD instance, include drive number 1 as well */
(void)XFsbl_Strcpy(XFsbl_SdEmmcFileName, "1:/BOOT.BIN");
}
}
else
{
/* set default SD file name as BOOT0000.BIN */
if (DrvNum == XFSBL_SD_DRV_NUM_0) {
(void)XFsbl_Strcpy(XFsbl_SdEmmcFileName, "BOOT0000.BIN");
FileNameLen = XFSBL_BASE_FILE_NAME_LEN_SD_0;
}
else {
/* For second SD instance, include drive number 1 as well */
(void)XFsbl_Strcpy(XFsbl_SdEmmcFileName, "1:/BOOT0000.BIN");
FileNameLen = XFSBL_BASE_FILE_NAME_LEN_SD_1;
}
/* Update file name (to BOOTXXXX.BIN) based on Multiboot register value */
for(Index = FileNameLen - 1U;
Index >= (FileNameLen - XFSBL_NUM_DIGITS_IN_FILE_NAME);
Index--)
{
Value = MultiBootNum % 10U;
MultiBootNum = MultiBootNum / 10U;
XFsbl_SdEmmcFileName[Index] += (char)Value;
if (MultiBootNum == 0U)
{
break;
}
}
}
XFsbl_Printf(DEBUG_INFO,
"File name is %s\r\n",XFsbl_SdEmmcFileName);
}
static u32 XFsbl_ResetValidation(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
u32 FsblErrorStatus=0U;
u32 ResetReasonValue=0U;
u32 ErrStatusRegValue;
/**
* Read the Error Status register
* If WDT reset, do fallback
*/
FsblErrorStatus = XFsbl_In32(XFSBL_ERROR_STATUS_REGISTER_OFFSET);
ResetReasonValue = XFsbl_In32(CRL_APB_RESET_REASON);
ErrStatusRegValue = XFsbl_In32(PMU_GLOBAL_ERROR_STATUS_1);
/**
* Check if the reset is due to system WDT during
* previous FSBL execution
*/
if (((ResetReasonValue & CRL_APB_RESET_REASON_PMU_SYS_RESET_MASK)
== CRL_APB_RESET_REASON_PMU_SYS_RESET_MASK) &&
((ErrStatusRegValue & PMU_GLOBAL_ERROR_STATUS_1_LPD_SWDT_MASK)
== PMU_GLOBAL_ERROR_STATUS_1_LPD_SWDT_MASK) &&
(FsblErrorStatus == XFSBL_RUNNING)) {
/**
* reset is due to System WDT.
* Do a fallback
*/
Status = XFSBL_ERROR_SYSTEM_WDT_RESET;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_SYSTEM_WDT_RESET\n\r");
goto END;
}
/**
* Mark FSBL running in error status register to
* detect the WDT reset while FSBL execution
*/
if (FsblErrorStatus != XFSBL_RUNNING) {
XFsbl_Out32(XFSBL_ERROR_STATUS_REGISTER_OFFSET,
XFSBL_RUNNING);
}
/**
* Read system error status register
* provide FsblHook function for any action
*/
END:
return Status;
}
/**
* This function waits for PL Done bit to be set or till timeout and resets
* PCAP after this.
*
* @param None
*
* @return error status based on implemented functionality (SUCCESS by default)
*
*****************************************************************************/
u32 XFsbl_PLWaitForDone(void) {
u32 Status = XFSBL_SUCCESS;
u32 PollCount;
u32 RegVal;
PollCount = (PL_DONE_POLL_COUNT);
while (PollCount) {
/* Read PCAP Status register and check for PL_DONE bit */
RegVal = XFsbl_In32(CSU_PCAP_STATUS);
RegVal &= CSU_PCAP_STATUS_PL_DONE_MASK;
if (RegVal == CSU_PCAP_STATUS_PL_DONE_MASK) {
break;
}
PollCount--;
}
if (RegVal == CSU_PCAP_STATUS_PL_DONE_MASK) {
XFsbl_Printf(DEBUG_GENERAL, "PL Configuration done successfully \r\n");
} else {
Status = XFSBL_ERROR_BITSTREAM_LOAD_FAIL;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_BITSTREAM_LOAD_FAIL\r\n");
goto END;
}
/* Reset PCAP after data transfer */
RegVal = XFsbl_In32(CSU_PCAP_RESET);
RegVal = RegVal | CSU_PCAP_RESET_RESET_MASK;
XFsbl_Out32(CSU_PCAP_RESET, RegVal);
do {
RegVal = XFsbl_In32(CSU_PCAP_RESET);
RegVal = RegVal & CSU_PCAP_RESET_RESET_MASK;
} while (RegVal != CSU_PCAP_RESET_RESET_MASK);
END:
return Status;
}
void XFsbl_EccInitialize(u32 Address, u32 Length)
{
u32 Index=0U;
/* Disable cache to ensure proper ECC initialization */
Xil_DCacheDisable();
while (Index<Length)
{
XFsbl_Out32(Address+Index, 1U) ;
Index += 4U;
}
Xil_DCacheEnable();
XFsbl_Printf(DEBUG_INFO,
"Address 0x%0lx, Length %0lx, ECC initialized \r\n",
Address, Length);
return ;
}
/**
* In Fallback, soft reset is applied to the system after incrementing
* the multiboot register. A hook is provided to before the fallback so
* that users can write their own code before soft reset
*
* @param none
*
* @return none
*
* @note We will not return from this function as it does soft reset
*****************************************************************************/
void XFsbl_FallBack(void)
{
u32 RegValue;
#ifdef XFSBL_WDT_PRESENT
/* Stop WDT as we are restarting */
XFsbl_StopWdt();
#endif
/* Hook before FSBL Fallback */
XFsbl_HookBeforeFallback();
/* Read the Multiboot register */
RegValue = XFsbl_In32(CSU_CSU_MULTI_BOOT);
XFsbl_Printf(DEBUG_GENERAL,"Performing FSBL FallBack\n\r");
XFsbl_UpdateMultiBoot(RegValue+1);
return;
}
void XFsbl_UpdateMultiBoot(u32 MultiBootValue)
{
u32 RegValue;
XFsbl_Out32(CSU_CSU_MULTI_BOOT, MultiBootValue);
/* make sure every thing completes */
dsb();
isb();
/* Soft reset the system */
XFsbl_Printf(DEBUG_GENERAL,"Performing System Soft Reset\n\r");
RegValue = XFsbl_In32(CRL_APB_RESET_CTRL);
XFsbl_Out32(CRL_APB_RESET_CTRL,
RegValue|CRL_APB_RESET_CTRL_SOFT_RESET_MASK);
/* wait here until reset happens */
while(1);
return;
}
/**
* FSBL exit function before the assembly code
*
* @param HandoffAddress is handoff address for the FSBL running cpu
*
* @param Flags is to determine whether to handoff to applicatio or
* to be in wfe state
*
* @return None
*
*
*****************************************************************************/
void XFsbl_HandoffExit(u64 HandoffAddress, u32 Flags)
{
/**
* Flush the L1 data cache and L2 cache, Disable Data Cache
*/
Xil_DCacheDisable();
XFsbl_Printf(DEBUG_GENERAL,"Exit from FSBL \n\r");
/**
* Exit to handoff address
* PTRSIZE is used since handoff is in same running cpu
* and address is of PTRSIZE
*/
XFsbl_Exit((PTRSIZE) HandoffAddress, Flags);
/**
* should not reach here
*/
return ;
}
/**
* This function is initializes the processor and system.
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @return
* - returns the error codes described in xfsbl_error.h on any error
* - returns XFSBL_SUCCESS on success
*
*****************************************************************************/
u32 XFsbl_Initialize(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
/**
* Configure the system as in PSU
*/
Status = XFsbl_SystemInit(FsblInstancePtr);
if (XFSBL_SUCCESS != Status) {
goto END;
}
/**
* Print the FSBL banner
*/
XFsbl_PrintFsblBanner();
/**
* Initialize the processor
*/
Status = XFsbl_ProcessorInit(FsblInstancePtr);
if (XFSBL_SUCCESS != Status) {
goto END;
}
/**
* Validate the reset reason
*/
Status = XFsbl_ResetValidation(FsblInstancePtr);
if (XFSBL_SUCCESS != Status) {
goto END;
}
XFsbl_Printf(DEBUG_INFO,"Processor Initialization Done \n\r");
END:
return Status;
}
/**
*
* @param
*
* @return
*
* @note
*
*
*****************************************************************************/
static void XFsbl_UndefHandler (void)
{
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_UNDEFINED_EXCEPTION\n\r");
XFsbl_ErrorLockDown(XFSBL_ERROR_UNDEFINED_EXCEPTION);
}
/**
* This function initializes the processor and updates the cluster id
* which indicates CPU on which fsbl is running
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @return returns the error codes described in xfsbl_error.h on any error
* returns XFSBL_SUCCESS on success
*
******************************************************************************/
static u32 XFsbl_ProcessorInit(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
//u64 ClusterId=0U;
PTRSIZE ClusterId=0U;
u32 RegValue;
u32 Index=0U;
/**
* Read the cluster ID and Update the Processor ID
* Initialize the processor settings that are not done in
* BSP startup code
*/
#ifdef ARMA53_64
ClusterId = mfcp(MPIDR_EL1);
#else
ClusterId = mfcp(XREG_CP15_MULTI_PROC_AFFINITY);
#endif
XFsbl_Printf(DEBUG_INFO,"Cluster ID 0x%0lx\n\r", ClusterId);
if (XGet_Zynq_UltraMp_Platform_info() == XPLAT_ZYNQ_ULTRA_MPQEMU) {
/**
* Remmaping for R5 in QEMU
*/
if (ClusterId == 0x80000004U) {
ClusterId = 0xC0000100U;
} else if (ClusterId == 0x80000005U) {
/* this corresponds to R5-1 */
Status = XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID\n\r");
goto END;
} else {
/* For MISRA C compliance */
}
}
/* store the processor ID based on the cluster ID */
if ((ClusterId & XFSBL_CLUSTER_ID_MASK) == XFSBL_A53_PROCESSOR) {
XFsbl_Printf(DEBUG_GENERAL,"Running on A53-0 ");
FsblInstancePtr->ProcessorID =
XIH_PH_ATTRB_DEST_CPU_A53_0;
#ifdef __aarch64__
/* Running on A53 64-bit */
XFsbl_Printf(DEBUG_GENERAL,"(64-bit) Processor \n\r");
FsblInstancePtr->A53ExecState = XIH_PH_ATTRB_A53_EXEC_ST_AA64;
#else
/* Running on A53 32-bit */
XFsbl_Printf(DEBUG_GENERAL,"(32-bit) Processor \n\r");
FsblInstancePtr->A53ExecState = XIH_PH_ATTRB_A53_EXEC_ST_AA32;
#endif
} else if ((ClusterId & XFSBL_CLUSTER_ID_MASK) == XFSBL_R5_PROCESSOR) {
/* A53ExecState is not valid for R5 */
FsblInstancePtr->A53ExecState = XIH_INVALID_EXEC_ST;
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
if ((RegValue & RPU_RPU_GLBL_CNTL_SLSPLIT_MASK) == 0U) {
XFsbl_Printf(DEBUG_GENERAL,
"Running on R5 Processor in Lockstep \n\r");
FsblInstancePtr->ProcessorID =
XIH_PH_ATTRB_DEST_CPU_R5_L;
} else {
XFsbl_Printf(DEBUG_GENERAL,
"Running on R5-0 Processor \n\r");
FsblInstancePtr->ProcessorID =
XIH_PH_ATTRB_DEST_CPU_R5_0;
}
/**
* Update the Vector locations in R5 TCM
*/
while (Index<32U) {
XFsbl_Out32(Index, XFSBL_R5_VECTOR_VALUE);
Index += 4;
}
} else {
Status = XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID\n\r");
goto END;
}
/**
* Register the exception handlers
*/
XFsbl_RegisterHandlers();
/* Prints for the perf measurement */
#ifdef XFSBL_PERF
#if !defined(ARMR5)
if (FsblInstancePtr->ProcessorID == XIH_PH_ATTRB_DEST_CPU_A53_0) {
XFsbl_Printf(DEBUG_PRINT_ALWAYS, "Proc: A53-0 Freq: %d Hz",
XPAR_CPU_CORTEXA53_0_CPU_CLK_FREQ_HZ);
if (FsblInstancePtr->A53ExecState == XIH_PH_ATTRB_A53_EXEC_ST_AA32) {
XFsbl_Printf(DEBUG_PRINT_ALWAYS, " Arch: 32 \r\n");
}
else if (FsblInstancePtr->A53ExecState ==
XIH_PH_ATTRB_A53_EXEC_ST_AA64) {
XFsbl_Printf(DEBUG_PRINT_ALWAYS, " Arch: 64 \r\n");
}
}
#else
if (FsblInstancePtr->ProcessorID == XIH_PH_ATTRB_DEST_CPU_R5_0) {
XFsbl_Printf(DEBUG_PRINT_ALWAYS, "Proc: R5-0 Freq: %d Hz \r\n",
XPAR_PSU_CORTEXR5_0_CPU_CLK_FREQ_HZ)
}
else if (FsblInstancePtr->ProcessorID == XIH_PH_ATTRB_DEST_CPU_R5_L) {
XFsbl_Printf(DEBUG_PRINT_ALWAYS, "Proc: R5-Lockstep "
"Freq: %d Hz \r\n", XPAR_PSU_CORTEXR5_0_CPU_CLK_FREQ_HZ);
}
#endif
#endif
END:
return Status;
}
/**
* This function is used to perform GT configuration for ZCU102 board.
* It also provides reset to GEM, enables FMC ADJ
*
* @param none
*
* @return
* - XFSBL_SUCCESS for successful configuration
* - errors as mentioned in xfsbl_error.h
*
*****************************************************************************/
static s32 XFsbl_BoardConfig(void)
{
u8 WriteBuffer[BUF_LEN] = {0};
XIicPs_Config *I2c0CfgPtr;
s32 Status = XFSBL_SUCCESS;
u32 ICMCfg0;
u32 ICMCfg1;
/* Initialize the IIC0 driver so that it is ready to use */
I2c0CfgPtr = XIicPs_LookupConfig(XPAR_XIICPS_0_DEVICE_ID);
if (I2c0CfgPtr == NULL) {
Status = XFSBL_ERROR_I2C_INIT;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_I2C_INIT\r\n");
goto END;
}
Status = XIicPs_CfgInitialize(&I2c0InstancePtr, I2c0CfgPtr,
I2c0CfgPtr->BaseAddress);
if (Status != XST_SUCCESS) {
Status = XFSBL_ERROR_I2C_INIT;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_I2C_INIT\r\n");
goto END;
}
/* Set the IIC serial clock rate */
XIicPs_SetSClk(&I2c0InstancePtr, IIC_SCLK_RATE_IOEXP);
/* Configure I/O pins as Output */
WriteBuffer[0] = CMD_CFG_0_REG;
WriteBuffer[1] = DATA_OUTPUT;
Status = XIicPs_MasterSendPolled(&I2c0InstancePtr,
WriteBuffer, 2, IOEXPANDER1_ADDR);
if (Status != XST_SUCCESS) {
Status = XFSBL_ERROR_I2C_WRITE;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_I2C_WRITE\r\n");
goto END;
}
/* Wait until bus is idle to start another transfer */
while (XIicPs_BusIsBusy(&I2c0InstancePtr));
/*
* Deasserting I2C_MUX_RESETB
* And GEM3 Resetb
* Selecting lanes based on configuration
*/
WriteBuffer[0] = CMD_OUTPUT_0_REG;
/* Populate WriteBuffer[1] based on ICM_CFG configuration */
ICMCfg0 = XFsbl_In32(SERDES_ICM_CFG0) &
(SERDES_ICM_CFG0_L0_ICM_CFG_MASK | SERDES_ICM_CFG0_L1_ICM_CFG_MASK);
ICMCfg1 = XFsbl_In32(SERDES_ICM_CFG1) &
(SERDES_ICM_CFG1_L2_ICM_CFG_MASK | SERDES_ICM_CFG1_L3_ICM_CFG_MASK);
if ((ICMCfg0 == ICM_CFG0_PCIE_DP) && (ICMCfg1 == ICM_CFG1_USB_SATA))
{
/* gt1110 */
WriteBuffer[1] = DATA_COMMON_CFG | DATA_GT_1110_CFG;
}
else
if ((ICMCfg0 == ICM_CFG0_DP_DP) && (ICMCfg1 == ICM_CFG1_USB_SATA))
{
/* gt1111 */
WriteBuffer[1] = DATA_COMMON_CFG | DATA_GT_1111_CFG;
}
else
if ((ICMCfg0 == ICM_CFG0_PCIE_PCIE) && (ICMCfg1 == ICM_CFG1_USB_SATA))
{
/* gt1100 */
WriteBuffer[1] = DATA_COMMON_CFG | DATA_GT_1100_CFG;
}
else
{
/* gt0000 or no GT configuration */
WriteBuffer[1] = DATA_COMMON_CFG | DATA_GT_0000_CFG;
}
/* Send the Data */
Status = XIicPs_MasterSendPolled(&I2c0InstancePtr,
WriteBuffer, 2, IOEXPANDER1_ADDR);
if (Status != XST_SUCCESS) {
Status = XFSBL_ERROR_I2C_WRITE;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_I2C_WRITE\r\n");
goto END;
}
/* Wait until bus is idle */
while (XIicPs_BusIsBusy(&I2c0InstancePtr));
/* Change the IIC serial clock rate */
XIicPs_SetSClk(&I2c0InstancePtr, IIC_SCLK_RATE_I2CMUX);
/* Set I2C Mux for channel-2 (MAXIM_PMBUS) */
WriteBuffer[0] = CMD_CH_2_REG;
Status = XIicPs_MasterSendPolled(&I2c0InstancePtr,
WriteBuffer, 1, PCA9544A_ADDR);
if (Status != XST_SUCCESS) {
Status = XFSBL_ERROR_I2C_WRITE;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_I2C_WRITE\r\n");
goto END;
}
/* Wait until bus is idle */
while (XIicPs_BusIsBusy(&I2c0InstancePtr));
/* Enable Regulator (FMC ADJ) */
WriteBuffer[0] = CMD_ON_OFF_CFG;
WriteBuffer[1] = ON_OFF_CFG_VAL;
Status = XIicPs_MasterSendPolled(&I2c0InstancePtr,
WriteBuffer, 2, MAX15301_ADDR);
if (Status != XST_SUCCESS) {
Status = XFSBL_ERROR_I2C_WRITE;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_I2C_WRITE\r\n");
goto END;
}
/* Wait until bus is idle */
while (XIicPs_BusIsBusy(&I2c0InstancePtr));
XFsbl_Printf(DEBUG_INFO,"Board Configuration successful \n\r");
END:
return Status;
}
/**
* This function validates the partition
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @param PartitionNum is the partition number in the image to be loaded
*
* @return returns the error codes described in xfsbl_error.h on any error
* returns XFSBL_SUCCESS on success
*
*****************************************************************************/
static u32 XFsbl_PartitionValidation(XFsblPs * FsblInstancePtr,
u32 PartitionNum)
{
u32 Status=XFSBL_SUCCESS;
u32 ChecksumType=0U;
s32 IsEncryptionEnabled=FALSE;
s32 IsAuthenticationEnabled=FALSE;
u32 DestinationDevice=0U;
u32 DestinationCpu=0U;
u32 ExecState=0U;
u32 CpuNo=0U;
XFsblPs_PartitionHeader * PartitionHeader;
#if defined(XFSBL_RSA)
u32 HashLen=0U;
#endif
#if defined(XFSBL_AES)
u32 ImageOffset = 0U;
u32 FsblIv[XIH_BH_IV_LENGTH / 4U];
u32 UnencryptedLength = 0;
u32 IvLocation;
#endif
#if defined(XFSBL_RSA) || defined(XFSBL_AES)
u32 Length=0U;
#endif
#if defined(XFSBL_RSA) || defined(XFSBL_AES) || defined(XFSBL_BS)
PTRSIZE LoadAddress=0U;
#endif
#if defined(XFSBL_BS)
u32 BitstreamWordSize = 0;
#endif
/**
* Update the variables
*/
PartitionHeader =
&FsblInstancePtr->ImageHeader.PartitionHeader[PartitionNum];
ChecksumType = XFsbl_GetChecksumType(PartitionHeader);
/**
* Check the encryption status
*/
if (XFsbl_IsEncrypted(PartitionHeader) ==
XIH_PH_ATTRB_ENCRYPTION )
{
IsEncryptionEnabled = TRUE;
#ifdef XFSBL_AES
/* Copy the Iv from Flash into local memory */
IvLocation = ImageOffset + XIH_BH_IV_OFFSET;
Status = FsblInstancePtr->DeviceOps.DeviceCopy(IvLocation,
(PTRSIZE) FsblIv, XIH_BH_IV_LENGTH);
if (Status != XFSBL_SUCCESS) {
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_DECRYPTION_IV_COPY_FAIL \r\n");
Status = XFSBL_ERROR_DECRYPTION_IV_COPY_FAIL;
goto END;
}
#else
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_AES_NOT_ENABLED \r\n");
Status = XFSBL_ERROR_AES_NOT_ENABLED;
goto END;
#endif
}
/**
* check the authentication status
*/
if (XFsbl_IsRsaSignaturePresent(PartitionHeader) ==
XIH_PH_ATTRB_RSA_SIGNATURE )
{
IsAuthenticationEnabled = TRUE;
}
DestinationDevice = XFsbl_GetDestinationDevice(PartitionHeader);
DestinationCpu = XFsbl_GetDestinationCpu(PartitionHeader);
/**
* Get the execution state
*/
ExecState = XFsbl_GetA53ExecState(PartitionHeader);
/**
* if destination cpu is not present, it means it is for same cpu
*/
if (DestinationCpu == XIH_PH_ATTRB_DEST_CPU_NONE)
{
DestinationCpu = FsblInstancePtr->ProcessorID;
}
/**
* Checksum Validation
*/
if (ChecksumType == XIH_PH_ATTRB_CHECKSUM_MD5)
{
/**
* Do the checksum validation
*/
}
#if defined(XFSBL_RSA) || defined(XFSBL_AES)
if ((IsAuthenticationEnabled == TRUE) || (IsEncryptionEnabled == TRUE))
{
LoadAddress = PartitionHeader->DestinationLoadAddress;
Length = PartitionHeader->TotalDataWordLength * 4U;
Status = XFsbl_GetLoadAddress(DestinationCpu,
&LoadAddress, Length);
if (XFSBL_SUCCESS != Status)
{
goto END;
}
}
#endif
#ifdef XFSBL_BS
if ((DestinationDevice == XIH_PH_ATTRB_DEST_DEVICE_PL) &&
(LoadAddress == 0U))
{
LoadAddress = XFSBL_DDR_TEMP_ADDRESS;
}
#endif
/**
* Authentication Check
*/
if (IsAuthenticationEnabled == TRUE)
{
XFsbl_Printf(DEBUG_INFO,"Authentication Enabled\r\n");
#ifdef XFSBL_RSA
/**
* Get the Sha type to be used from
* boot header attributes
*/
if ((FsblInstancePtr->BootHdrAttributes &
XIH_BH_IMAGE_ATTRB_SHA2_MASK) ==
XIH_BH_IMAGE_ATTRB_SHA2_MASK)
{
HashLen = XFSBL_HASH_TYPE_SHA2;
} else {
HashLen = XFSBL_HASH_TYPE_SHA3;
}
/**
* cache disbale can be removed
*/
Xil_DCacheDisable();
/**
* Do the authentication validation
*/
Status = XFsbl_Authentication(FsblInstancePtr, LoadAddress, Length,
(LoadAddress + Length) - XFSBL_AUTH_CERT_MIN_SIZE,
HashLen);
if (Status != XFSBL_SUCCESS)
{
goto END;
}
#else
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_RSA_NOT_ENABLED \r\n");
Status = XFSBL_ERROR_RSA_NOT_ENABLED;
goto END;
#endif
}
/**
* Decrypt image through CSU DMA
*/
if (IsEncryptionEnabled == TRUE) {
XFsbl_Printf(DEBUG_INFO, "Decryption Enabled\r\n");
#ifdef XFSBL_AES
/* AES expects IV in big endian form */
FsblIv[0] = Xil_Htonl(FsblIv[0]);
FsblIv[1] = Xil_Htonl(FsblIv[1]);
FsblIv[2] = Xil_Htonl(FsblIv[2]);
/* Initialize the Aes Instance so that it's ready to use */
XSecure_AesInitialize(&SecureAes, &CsuDma,
XSECURE_CSU_AES_KEY_SRC_DEV, FsblIv, NULL);
XFsbl_Printf(DEBUG_INFO, " Aes initialized \r\n");
UnencryptedLength = PartitionHeader->UnEncryptedDataWordLength * 4U;
if (DestinationDevice != XIH_PH_ATTRB_DEST_DEVICE_PL) {
Status = XSecure_AesDecrypt(&SecureAes, (u8 *) LoadAddress,
(u8 *) LoadAddress, UnencryptedLength);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_DECRYPTION_FAIL;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_DECRYPTION_FAIL\r\n");
goto END;
} else {
XFsbl_Printf(DEBUG_GENERAL, "Decryption Successful\r\n");
}
}
#else
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_AES_NOT_ENABLED \r\n");
Status = XFSBL_ERROR_AES_NOT_ENABLED;
goto END;
#endif
}
#ifdef XFSBL_BS
/**
* for PL image use CSU DMA to route to PL
*/
if (DestinationDevice == XIH_PH_ATTRB_DEST_DEVICE_PL)
{
/**
* Fsbl hook before bit stream download
*/
Status = XFsbl_HookBeforeBSDownload();
if (Status != XFSBL_SUCCESS)
{
Status = XFSBL_ERROR_HOOK_BEFORE_BITSTREAM_DOWNLOAD;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_HOOK_BEFORE_BITSTREAM_DOWNLOAD\r\n");
goto END;
}
XFsbl_Printf(DEBUG_GENERAL, "Bitstream download to start now\r\n");
Status = XFsbl_PcapInit();
if (Status != XFSBL_SUCCESS) {
goto END;
}
if (IsEncryptionEnabled == TRUE) {
#ifdef XFSBL_AES
/*
* The secure bitstream would be sent through CSU DMA to AES
* and the decrypted bitstream is sent directly to PCAP
* by configuring SSS appropriately
*/
Status = XSecure_AesDecrypt(&SecureAes,
(u8 *) XFSBL_DESTINATION_PCAP_ADDR,
(u8 *) LoadAddress, UnencryptedLength);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_BITSTREAM_DECRYPTION_FAIL;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_BITSTREAM_DECRYPTION_FAIL\r\n");
/* Reset PL */
XFsbl_Out32(CSU_PCAP_PROG, 0x0);
goto END;
} else {
XFsbl_Printf(DEBUG_GENERAL,
"Bitstream decryption Successful\r\n");
}
#endif
}
else {
/* Use CSU DMA to load Bit stream to PL */
BitstreamWordSize = PartitionHeader->UnEncryptedDataWordLength;
Status = XFsbl_WriteToPcap(BitstreamWordSize, (u8 *) LoadAddress);
if (Status != XFSBL_SUCCESS) {
goto END;
}
}
Status = XFsbl_PLWaitForDone();
if (Status != XFSBL_SUCCESS) {
goto END;
}
/**
* Fsbl hook after bit stream download
*/
Status = XFsbl_HookAfterBSDownload();
if (Status != XFSBL_SUCCESS)
{
Status = XFSBL_ERROR_HOOK_AFTER_BITSTREAM_DOWNLOAD;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_HOOK_AFTER_BITSTREAM_DOWNLOAD\r\n");
goto END;
}
}
#endif
/**
* Update the handoff details
*/
if ((DestinationDevice != XIH_PH_ATTRB_DEST_DEVICE_PL) &&
(DestinationDevice != XIH_PH_ATTRB_DEST_DEVICE_PMU))
{
CpuNo = FsblInstancePtr->HandoffCpuNo;
if (XFsbl_CheckHandoffCpu(FsblInstancePtr,
DestinationCpu) == XFSBL_SUCCESS)
{
FsblInstancePtr->HandoffValues[CpuNo].CpuSettings =
DestinationCpu | ExecState;
FsblInstancePtr->HandoffValues[CpuNo].HandoffAddress =
PartitionHeader->DestinationExecutionAddress;
FsblInstancePtr->HandoffCpuNo += 1U;
}
}
END:
return Status;
}
static u32 XFsbl_SetCpuPwrSettings (u32 CpuSettings, u32 Flags)
{
u32 RegValue;
u32 Status;
u32 CpuId;
u32 ExecState;
u32 PwrStateMask;
/**
* Reset the CPU
*/
if ((Flags & XFSBL_CPU_SWRST) != 0U)
{
CpuId = CpuSettings & XIH_PH_ATTRB_DEST_CPU_MASK;
ExecState = CpuSettings & XIH_PH_ATTRB_A53_EXEC_ST_MASK;
switch(CpuId)
{
case XIH_PH_ATTRB_DEST_CPU_A53_0:
PwrStateMask = PMU_GLOBAL_PWR_STATE_ACPU0_MASK |
PMU_GLOBAL_PWR_STATE_FP_MASK |
PMU_GLOBAL_PWR_STATE_L2_BANK0_MASK;
Status = XFsbl_PowerUpIsland(PwrStateMask);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_A53_0_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_A53_0_POWER_UP\r\n");
goto END;
}
/**
* Set to Aarch32 if enabled
*/
if (ExecState == XIH_PH_ATTRB_A53_EXEC_ST_AA32)
{
RegValue = XFsbl_In32(APU_CONFIG_0);
RegValue &= ~(APU_CONFIG_0_AA64N32_MASK_CPU0);
XFsbl_Out32(APU_CONFIG_0, RegValue);
}
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRF_APB_ACPU_CTRL);
RegValue |= (CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK |
CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK);
XFsbl_Out32(CRF_APB_ACPU_CTRL, RegValue);
/**
* Release reset
*/
RegValue = XFsbl_In32(CRF_APB_RST_FPD_APU);
RegValue &= ~(CRF_APB_RST_FPD_APU_ACPU0_RESET_MASK |
CRF_APB_RST_FPD_APU_APU_L2_RESET_MASK |
CRF_APB_RST_FPD_APU_ACPU0_PWRON_RESET_MASK);
XFsbl_Out32(CRF_APB_RST_FPD_APU, RegValue);
break;
case XIH_PH_ATTRB_DEST_CPU_A53_1:
PwrStateMask = PMU_GLOBAL_PWR_STATE_ACPU1_MASK |
PMU_GLOBAL_PWR_STATE_FP_MASK |
PMU_GLOBAL_PWR_STATE_L2_BANK0_MASK;
Status = XFsbl_PowerUpIsland(PwrStateMask);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_A53_1_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_A53_1_POWER_UP\r\n");
goto END;
}
/**
* Set to Aarch32 if enabled
*/
if (ExecState == XIH_PH_ATTRB_A53_EXEC_ST_AA32)
{
RegValue = XFsbl_In32(APU_CONFIG_0);
RegValue &= ~(APU_CONFIG_0_AA64N32_MASK_CPU1);
XFsbl_Out32(APU_CONFIG_0, RegValue);
}
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRF_APB_ACPU_CTRL);
RegValue |= (CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK |
CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK);
XFsbl_Out32(CRF_APB_ACPU_CTRL, RegValue);
/**
* Release reset
*/
RegValue = XFsbl_In32(CRF_APB_RST_FPD_APU);
RegValue &= ~(CRF_APB_RST_FPD_APU_ACPU1_RESET_MASK |
CRF_APB_RST_FPD_APU_APU_L2_RESET_MASK |
CRF_APB_RST_FPD_APU_ACPU1_PWRON_RESET_MASK);
XFsbl_Out32(CRF_APB_RST_FPD_APU, RegValue);
break;
case XIH_PH_ATTRB_DEST_CPU_A53_2:
PwrStateMask = PMU_GLOBAL_PWR_STATE_ACPU2_MASK |
PMU_GLOBAL_PWR_STATE_FP_MASK |
PMU_GLOBAL_PWR_STATE_L2_BANK0_MASK;
Status = XFsbl_PowerUpIsland(PwrStateMask);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_A53_2_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_A53_2_POWER_UP\r\n");
goto END;
}
/**
* Set to Aarch32 if enabled
*/
if (ExecState == XIH_PH_ATTRB_A53_EXEC_ST_AA32)
{
RegValue = XFsbl_In32(APU_CONFIG_0);
RegValue &= ~(APU_CONFIG_0_AA64N32_MASK_CPU2);
XFsbl_Out32(APU_CONFIG_0, RegValue);
}
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRF_APB_ACPU_CTRL);
RegValue |= (CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK |
CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK);
XFsbl_Out32(CRF_APB_ACPU_CTRL, RegValue);
/**
* Release reset
*/
RegValue = XFsbl_In32(CRF_APB_RST_FPD_APU);
RegValue &= ~(CRF_APB_RST_FPD_APU_ACPU2_RESET_MASK |
CRF_APB_RST_FPD_APU_APU_L2_RESET_MASK |
CRF_APB_RST_FPD_APU_ACPU2_PWRON_RESET_MASK);
XFsbl_Out32(CRF_APB_RST_FPD_APU, RegValue);
break;
case XIH_PH_ATTRB_DEST_CPU_A53_3:
PwrStateMask = PMU_GLOBAL_PWR_STATE_ACPU3_MASK |
PMU_GLOBAL_PWR_STATE_FP_MASK |
PMU_GLOBAL_PWR_STATE_L2_BANK0_MASK;
Status = XFsbl_PowerUpIsland(PwrStateMask);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_A53_3_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_A53_3_POWER_UP\r\n");
goto END;
}
/**
* Set to Aarch32 if enabled
*/
if (ExecState == XIH_PH_ATTRB_A53_EXEC_ST_AA32)
{
RegValue = XFsbl_In32(APU_CONFIG_0);
RegValue &= ~(APU_CONFIG_0_AA64N32_MASK_CPU3);
XFsbl_Out32(APU_CONFIG_0, RegValue);
}
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRF_APB_ACPU_CTRL);
RegValue |= (CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK |
CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK);
XFsbl_Out32(CRF_APB_ACPU_CTRL, RegValue);
/**
* Release reset
*/
RegValue = XFsbl_In32(CRF_APB_RST_FPD_APU);
RegValue &= ~(CRF_APB_RST_FPD_APU_ACPU3_RESET_MASK |
CRF_APB_RST_FPD_APU_APU_L2_RESET_MASK |
CRF_APB_RST_FPD_APU_ACPU3_PWRON_RESET_MASK);
XFsbl_Out32(CRF_APB_RST_FPD_APU, RegValue);
break;
case XIH_PH_ATTRB_DEST_CPU_R5_0:
Status = XFsbl_PowerUpIsland(PMU_GLOBAL_PWR_STATE_R5_0_MASK);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_R5_0_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_R5_0_POWER_UP\r\n");
goto END;
}
/**
* Place R5, TCM's in split mode
*/
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
RegValue |= (RPU_RPU_GLBL_CNTL_SLSPLIT_MASK);
RegValue &= ~(RPU_RPU_GLBL_CNTL_TCM_COMB_MASK);
RegValue &= ~(RPU_RPU_GLBL_CNTL_SLCLAMP_MASK);
XFsbl_Out32(RPU_RPU_GLBL_CNTL, RegValue);
/**
* Place R5-0 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_0_CFG);
RegValue &= ~(RPU_RPU_0_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_0_CFG, RegValue);
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRL_APB_CPU_R5_CTRL);
RegValue |= (CRL_APB_CPU_R5_CTRL_CLKACT_MASK);
XFsbl_Out32(CRL_APB_CPU_R5_CTRL, RegValue);
/**
* Provide some delay,
* so that clock propogates properly.
*/
(void)usleep(0x50U);
/**
* Release reset to R5-0
*/
RegValue = XFsbl_In32(CRL_APB_RST_LPD_TOP);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R50_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_AMBA_RESET_MASK);
XFsbl_Out32(CRL_APB_RST_LPD_TOP, RegValue);
/**
* Take R5-0 out of HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_0_CFG);
RegValue |= RPU_RPU_0_CFG_NCPUHALT_MASK;
XFsbl_Out32(RPU_RPU_0_CFG, RegValue);
break;
case XIH_PH_ATTRB_DEST_CPU_R5_1:
Status = XFsbl_PowerUpIsland(PMU_GLOBAL_PWR_STATE_R5_1_MASK);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_R5_1_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_R5_1_POWER_UP\r\n");
goto END;
}
/**
* Place R5, TCM's in split mode
*/
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
RegValue |= RPU_RPU_GLBL_CNTL_SLSPLIT_MASK;
RegValue &= ~(RPU_RPU_GLBL_CNTL_TCM_COMB_MASK);
RegValue &= ~(RPU_RPU_GLBL_CNTL_SLCLAMP_MASK);
XFsbl_Out32(RPU_RPU_GLBL_CNTL, RegValue);
/**
* Place R5-1 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_1_CFG);
RegValue &= ~(RPU_RPU_1_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_1_CFG, RegValue);
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRL_APB_CPU_R5_CTRL);
RegValue |= CRL_APB_CPU_R5_CTRL_CLKACT_MASK;
XFsbl_Out32(CRL_APB_CPU_R5_CTRL, RegValue);
/**
* Provide some delay,
* so that clock propogates properly.
*/
(void)usleep(0x50U);
/**
* Release reset to R5-1
*/
RegValue = XFsbl_In32(CRL_APB_RST_LPD_TOP);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R51_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_AMBA_RESET_MASK);
XFsbl_Out32(CRL_APB_RST_LPD_TOP, RegValue);
/**
* Take R5-1 out of HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_1_CFG);
RegValue |= RPU_RPU_1_CFG_NCPUHALT_MASK;
XFsbl_Out32(RPU_RPU_1_CFG, RegValue);
break;
case XIH_PH_ATTRB_DEST_CPU_R5_L:
Status = XFsbl_PowerUpIsland(PMU_GLOBAL_PWR_STATE_R5_0_MASK);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_R5_L_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_R5_L_POWER_UP\r\n");
goto END;
}
/**
* Place R5, TCM's in safe mode
*/
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
RegValue &= ~(RPU_RPU_GLBL_CNTL_SLSPLIT_MASK);
RegValue |= RPU_RPU_GLBL_CNTL_TCM_COMB_MASK;
RegValue |= RPU_RPU_GLBL_CNTL_SLCLAMP_MASK;
XFsbl_Out32(RPU_RPU_GLBL_CNTL, RegValue);
/**
* Place R5-0 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_0_CFG);
RegValue &= ~(RPU_RPU_0_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_0_CFG, RegValue);
/**
* Place R5-1 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_1_CFG);
RegValue &= ~(RPU_RPU_1_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_1_CFG, RegValue);
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRL_APB_CPU_R5_CTRL);
RegValue |= CRL_APB_CPU_R5_CTRL_CLKACT_MASK;
XFsbl_Out32(CRL_APB_CPU_R5_CTRL, RegValue);
/**
* Provide some delay,
* so that clock propogates properly.
*/
(void )usleep(0x50U);
/**
* Release reset to R5-0, R5-1
*/
RegValue = XFsbl_In32(CRL_APB_RST_LPD_TOP);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R50_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R51_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_AMBA_RESET_MASK);
XFsbl_Out32(CRL_APB_RST_LPD_TOP, RegValue);
/**
* Take R5-0 out of HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_0_CFG);
RegValue |= RPU_RPU_0_CFG_NCPUHALT_MASK;
XFsbl_Out32(RPU_RPU_0_CFG, RegValue);
/**
* Take R5-1 out of HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_1_CFG);
RegValue |= RPU_RPU_1_CFG_NCPUHALT_MASK;
XFsbl_Out32(RPU_RPU_1_CFG, RegValue);
break;
default:
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_HANDOFF_CPUID\n\r");
Status = XFSBL_ERROR_HANDOFF_CPUID;
break;
}
}
else
{
Status = XFSBL_SUCCESS;
}
END:
return Status;
}
u32 XFsbl_GetLoadAddress(u32 DestinationCpu, PTRSIZE * LoadAddressPtr, u32 Length)
{
u32 Status = XFSBL_SUCCESS;
PTRSIZE Address=0U;
Address = *LoadAddressPtr;
/**
* Update for R50 TCM address
*/
if ((DestinationCpu == XIH_PH_ATTRB_DEST_CPU_R5_0) &&
(Address <= XFSBL_R5_TCM_END_ADDRESS))
{
/**
* Check if fits to TCM or not
*/
if ((Address + Length) > XFSBL_R5_TCM_END_ADDRESS)
{
Status = XFSBL_ERROR_LOAD_ADDRESS;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_LOAD_ADDRESS\r\n");
goto END;
}
/**
* Update Address to the higher TCM address
*/
Address = XFSBL_R50_HIGH_TCM_START_ADDRESS + Address;
} else
/**
* Update for R5-1 TCM address
*/
if ((DestinationCpu == XIH_PH_ATTRB_DEST_CPU_R5_1) &&
(Address <= XFSBL_R5_TCM_END_ADDRESS))
{
/**
* Check if fits to TCM or not
*/
if ((Address + Length) > XFSBL_R5_TCM_END_ADDRESS)
{
Status = XFSBL_ERROR_LOAD_ADDRESS;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_LOAD_ADDRESS\r\n");
goto END;
}
/**
* Update Address to the higher TCM address
*/
Address = XFSBL_R51_HIGH_TCM_START_ADDRESS + Address;
} else
/**
* Update for the R5-L TCM address
*/
if ((DestinationCpu == XIH_PH_ATTRB_DEST_CPU_R5_L) &&
(Address <= XFSBL_R5L_TCM_END_ADDRESS))
{
/**
* Check if fits to TCM or not
*/
if ((Address + Length) > XFSBL_R5L_TCM_END_ADDRESS)
{
Status = XFSBL_ERROR_LOAD_ADDRESS;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_LOAD_ADDRESS\r\n");
goto END;
}
/**
* Update Address to the higher TCM address
*/
Address = XFSBL_R50_HIGH_TCM_START_ADDRESS + Address;
} else
{
/**
* For MISRA complaince
*/
}
/**
* Update the LoadAddress
*/
*LoadAddressPtr = Address;
END:
return Status;
}
/**
* This function copies the partition to specified destination
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @param PartitionNum is the partition number in the image to be loaded
*
* @return returns the error codes described in xfsbl_error.h on any error
* returns XFSBL_SUCCESS on success
*****************************************************************************/
static u32 XFsbl_PartitionCopy(XFsblPs * FsblInstancePtr, u32 PartitionNum)
{
u32 Status=XFSBL_SUCCESS;
u32 DestinationCpu=0U;
u32 CpuNo=0U;
u32 DestinationDevice=0U;
u32 ExecState=0U;
XFsblPs_PartitionHeader * PartitionHeader;
u32 SrcAddress=0U;
PTRSIZE LoadAddress=0U;
u32 Length=0U;
u32 RunningCpu=0U;
/**
* Assign the partition header to local variable
*/
PartitionHeader =
&FsblInstancePtr->ImageHeader.PartitionHeader[PartitionNum];
RunningCpu = FsblInstancePtr->ProcessorID;
/**
* Check for XIP image
* No need to copy for XIP image
*/
DestinationCpu = XFsbl_GetDestinationCpu(PartitionHeader);
/**
* Get the execution state
*/
ExecState = XFsbl_GetA53ExecState(PartitionHeader);
/**
* if destination cpu is not present, it means it is for same cpu
*/
if (DestinationCpu == XIH_PH_ATTRB_DEST_CPU_NONE)
{
DestinationCpu = FsblInstancePtr->ProcessorID;
}
if (PartitionHeader->UnEncryptedDataWordLength == 0U)
{
/**
* Update the Handoff address only for the first application
* of that cpu
* This is for XIP image. For other partitions it handoff
* address is updated after partition validation
*/
CpuNo = FsblInstancePtr->HandoffCpuNo;
if (XFsbl_CheckHandoffCpu(FsblInstancePtr,
DestinationCpu) == XFSBL_SUCCESS)
{
FsblInstancePtr->HandoffValues[CpuNo].CpuSettings =
DestinationCpu | ExecState;
FsblInstancePtr->HandoffValues[CpuNo].HandoffAddress =
PartitionHeader->DestinationExecutionAddress;
FsblInstancePtr->HandoffCpuNo += 1U;
} else {
/**
*
* if two partitions has same destination cpu, error can
* be triggered here
*/
}
Status = XFSBL_SUCCESS;
goto END;
}
/**
* Copy the PL to temporary DDR Address
* Copy the PS to Load Address
* Copy the PMU firmware to PMU RAM
*/
DestinationDevice = XFsbl_GetDestinationDevice(PartitionHeader);
LoadAddress = PartitionHeader->DestinationLoadAddress;
if (DestinationDevice == XIH_PH_ATTRB_DEST_DEVICE_PL)
{
#ifdef XFSBL_BS
if (LoadAddress == XFSBL_DUMMY_PL_ADDR)
{
LoadAddress = XFSBL_DDR_TEMP_ADDRESS;
}
#else
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_PL_NOT_ENABLED \r\n");
Status = XFSBL_ERROR_PL_NOT_ENABLED;
goto END;
#endif
}
/**
* Get the source(flash offset) address where it needs to copy
*/
SrcAddress = FsblInstancePtr->ImageOffsetAddress +
((PartitionHeader->DataWordOffset) *
XIH_PARTITION_WORD_LENGTH);
/**
* Length of the partition to be copied
*/
Length = (PartitionHeader->TotalDataWordLength) *
XIH_PARTITION_WORD_LENGTH;
/**
* When destination device is R5-0/R5-1/R5-L and load address is in TCM
* copy to high address of TCM address map
* Update the LoadAddress
*/
Status = XFsbl_GetLoadAddress(DestinationCpu, &LoadAddress, Length);
if (XFSBL_SUCCESS != Status)
{
goto END;
}
/**
* Configure the memory
*/
XFsbl_ConfigureMemory(RunningCpu, DestinationCpu,
LoadAddress, Length);
/**
*
* Do not copy the IVT if FSBL is running in R5-0/R5-L at 0x0 TCM
* Update the SrcAddress, LoadAddress and Len based on the
* above condition
*/
#if 1
if (((FsblInstancePtr->ProcessorID ==
XIH_PH_ATTRB_DEST_CPU_R5_0) ||
(FsblInstancePtr->ProcessorID ==
XIH_PH_ATTRB_DEST_CPU_R5_L)) &&
((LoadAddress > XFSBL_R50_HIGH_TCM_START_ADDRESS) &&
(LoadAddress <
XFSBL_R50_HIGH_TCM_START_ADDRESS + XFSBL_IVT_LENGTH)))
{
/**
* Get the length of the IVT area to be
* skipped from Load Address
*/
TcmSkipAddress = LoadAddress/XFSBL_IVT_LENGTH;
TcmSkipLength = XFSBL_IVT_LENGTH - TcmSkipAddress;
/**
* Check if Length is less than SkipLength
*/
if (TcmSkipLength > Length)
{
TcmSkipLength = Length;
}
/**
* Copy the Skip length to a local array
*/
Status = FsblInstancePtr->DeviceOps.DeviceCopy(SrcAddress,
(PTRSIZE )TcmVectorArray, TcmSkipLength);
if (XFSBL_SUCCESS != Status)
{
goto END;
}
SrcAddress += TcmSkipLength;
LoadAddress += TcmSkipLength;
Length -= TcmSkipLength;
}
#endif
if (DestinationDevice == XIH_PH_ATTRB_DEST_DEVICE_PMU)
{
/* Enable PMU_0 IPI */
XFsbl_Out32(IPI_PMU_0_IER, IPI_PMU_0_IER_PMU_0_MASK);
/* Trigger PMU0 IPI in PMU IPI TRIG Reg */
XFsbl_Out32(IPI_PMU_0_TRIG, IPI_PMU_0_TRIG_PMU_0_MASK);
/**
* Wait until PMU Microblaze goes to sleep state,
* before starting firmware download to PMU RAM
*/
while((XFsbl_In32(PMU_GLOBAL_GLOBAL_CNTRL) &
PMU_GLOBAL_GLOBAL_CNTRL_MB_SLEEP_MASK) !=
PMU_GLOBAL_GLOBAL_CNTRL_MB_SLEEP_MASK ) {;}
}
/**
* Copy the partition to PS_DDR/PL_DDR/TCM
*/
Status = FsblInstancePtr->DeviceOps.DeviceCopy(SrcAddress,
LoadAddress, Length);
if (XFSBL_SUCCESS != Status)
{
goto END;
}
END:
return Status;
}
/**
* This function checks the power state and reset for the memory type
* and release the reset if required
*
* @param MemoryType is the memory to be checked
* - XFSBL_R5_0_TCM
* - XFSBL_R5_1_TCM
* (to be added)
* - XFSBL_R5_0_TCMA
* - XFSBL_R5_0_TCMB
* - XFSBL_PS_DDR
* - XFSBL_PL_DDR
*
* @return none
*****************************************************************************/
static u32 XFsbl_PowerUpMemory(u32 MemoryType)
{
u32 RegValue;
u32 Status = XFSBL_SUCCESS;
u32 PwrStateMask;
/**
* Check the power status of the memory
* Power up if required
*
* Release the reset of the memory if present
*/
switch (MemoryType)
{
case XFSBL_R5_0_TCM:
{
PwrStateMask = PMU_GLOBAL_PWR_STATE_R5_0_MASK |
PMU_GLOBAL_PWR_STATE_TCM0A_MASK |
PMU_GLOBAL_PWR_STATE_TCM0B_MASK;
Status = XFsbl_PowerUpIsland(PwrStateMask);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_R5_0_TCM_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_R5_0_TCM_POWER_UP\r\n");
goto END;
}
/**
* To access TCM,
* Release reset to R5 and enable the clk
* R5 is under halt state
*
* If R5 are out of reset and clk is enabled so doing
* again is no issue. R5 might be under running state
*/
/**
* Place R5, TCM in split mode
*/
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
RegValue |= RPU_RPU_GLBL_CNTL_SLSPLIT_MASK;
RegValue &= ~(RPU_RPU_GLBL_CNTL_TCM_COMB_MASK);
RegValue &= ~(RPU_RPU_GLBL_CNTL_SLCLAMP_MASK);
XFsbl_Out32(RPU_RPU_GLBL_CNTL, RegValue);
/**
* Place R5-0 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_0_CFG);
RegValue &= ~(RPU_RPU_0_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_0_CFG, RegValue);
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRL_APB_CPU_R5_CTRL);
RegValue |= CRL_APB_CPU_R5_CTRL_CLKACT_MASK;
XFsbl_Out32(CRL_APB_CPU_R5_CTRL, RegValue);
/**
* Provide some delay,
* so that clock propogates properly.
*/
(void)usleep(0x50U);
/**
* Release reset to R5-0
*/
RegValue = XFsbl_In32(CRL_APB_RST_LPD_TOP);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R50_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_AMBA_RESET_MASK);
XFsbl_Out32(CRL_APB_RST_LPD_TOP, RegValue);
} break;
case XFSBL_R5_1_TCM:
{
PwrStateMask = PMU_GLOBAL_PWR_STATE_R5_1_MASK |
PMU_GLOBAL_PWR_STATE_TCM1A_MASK |
PMU_GLOBAL_PWR_STATE_TCM1B_MASK;
Status = XFsbl_PowerUpIsland(PwrStateMask);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_R5_1_TCM_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_R5_1_TCM_POWER_UP\r\n");
goto END;
}
/**
* Place R5 in split mode
*/
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
RegValue |= RPU_RPU_GLBL_CNTL_SLSPLIT_MASK;
RegValue &= ~(RPU_RPU_GLBL_CNTL_TCM_COMB_MASK);
RegValue &= ~(RPU_RPU_GLBL_CNTL_SLCLAMP_MASK);
XFsbl_Out32(RPU_RPU_GLBL_CNTL, RegValue);
/**
* Place R5-1 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_1_CFG);
RegValue &= ~(RPU_RPU_1_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_1_CFG, RegValue);
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRL_APB_CPU_R5_CTRL);
RegValue |= CRL_APB_CPU_R5_CTRL_CLKACT_MASK;
XFsbl_Out32(CRL_APB_CPU_R5_CTRL, RegValue);
/**
* Provide some delay,
* so that clock propogates properly.
*/
(void )usleep(0x50U);
/**
* Release reset to R5-1
*/
RegValue = XFsbl_In32(CRL_APB_RST_LPD_TOP);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R51_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_AMBA_RESET_MASK);
XFsbl_Out32(CRL_APB_RST_LPD_TOP, RegValue);
} break;
case XFSBL_R5_L_TCM:
{
PwrStateMask = PMU_GLOBAL_PWR_STATE_R5_0_MASK |
PMU_GLOBAL_PWR_STATE_TCM0A_MASK |
PMU_GLOBAL_PWR_STATE_TCM0B_MASK |
PMU_GLOBAL_PWR_STATE_TCM1A_MASK |
PMU_GLOBAL_PWR_STATE_TCM1B_MASK;
Status = XFsbl_PowerUpIsland(PwrStateMask);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_R5_L_TCM_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_R5_L_TCM_POWER_UP\r\n");
goto END;
}
/**
* Place R5 in lock step mode
* Combine TCM's
*/
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
RegValue |= RPU_RPU_GLBL_CNTL_SLCLAMP_MASK;
RegValue &= ~(RPU_RPU_GLBL_CNTL_SLSPLIT_MASK);
RegValue |= RPU_RPU_GLBL_CNTL_TCM_COMB_MASK;
XFsbl_Out32(RPU_RPU_GLBL_CNTL, RegValue);
/**
* Place R5-0 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_0_CFG);
RegValue &= ~(RPU_RPU_0_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_0_CFG, RegValue);
/**
* Place R5-1 in HALT state
*/
RegValue = XFsbl_In32(RPU_RPU_1_CFG);
RegValue &= ~(RPU_RPU_1_CFG_NCPUHALT_MASK);
XFsbl_Out32(RPU_RPU_1_CFG, RegValue);
/**
* Enable the clock
*/
RegValue = XFsbl_In32(CRL_APB_CPU_R5_CTRL);
RegValue |= CRL_APB_CPU_R5_CTRL_CLKACT_MASK;
XFsbl_Out32(CRL_APB_CPU_R5_CTRL, RegValue);
/**
* Provide some delay,
* so that clock propogates properly.
*/
(void )usleep(0x50U);
/**
* Release reset to R5-0,R5-1
*/
RegValue = XFsbl_In32(CRL_APB_RST_LPD_TOP);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R50_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_R51_RESET_MASK);
RegValue &= ~(CRL_APB_RST_LPD_TOP_RPU_AMBA_RESET_MASK);
XFsbl_Out32(CRL_APB_RST_LPD_TOP, RegValue);
} break;
default:
/* nothing to do */
break;
}
END:
return Status;
}
/**
* This function initializes the system using the psu_init()
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @return returns the error codes described in xfsbl_error.h on any error
* returns XFSBL_SUCCESS on success
*
******************************************************************************/
static u32 XFsbl_SystemInit(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
#if defined (XPAR_PSU_DDR_0_S_AXI_BASEADDR) && !defined (ARMR5)
u32 BlockNum;
#endif
/**
* MIO33 can be used to control power to PL through PMU.
* For 1.0 and 2.0 Silicon, a workaround is needed to Powerup PL
* before MIO33 is configured. Hence, before MIO configuration,
* Powerup PL (but restore isolation).
*/
if (XGetPSVersion_Info() <= XPS_VERSION_2) {
Status = XFsbl_PowerUpIsland(PMU_GLOBAL_PWR_STATE_PL_MASK);
if (Status != XFSBL_SUCCESS) {
Status = XFSBL_ERROR_PL_POWER_UP;
XFsbl_Printf(DEBUG_GENERAL, "XFSBL_ERROR_PL_POWER_UP\r\n");
goto END;
}
/* For PS only reset, make sure FSBL exits with isolation removed */
if (FsblInstancePtr->ResetReason != PS_ONLY_RESET) {
XFsbl_IsolationRestore(PMU_GLOBAL_REQ_ISO_INT_EN_PL_NONPCAP_MASK);
}
}
/**
* psu initialization
*/
Status = (u32)psu_init();
if (XFSBL_SUCCESS != Status) {
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_PSU_INIT_FAILED\n\r");
/**
* Need to check a way to communicate both FSBL code
* and PSU init error code
*/
Status = XFSBL_PSU_INIT_FAILED + Status;
goto END;
}
#ifdef XFSBL_PERF
XTime_GetTime(&(FsblInstancePtr->PerfTime.tFsblStart));
#endif
#if defined (XPAR_PSU_DDR_0_S_AXI_BASEADDR) && !defined (ARMR5)
/* For A53, mark DDR region as "Memory" as DDR initialization is done */
#ifdef ARMA53_64
/* For A53 64bit*/
for(BlockNum = 0; BlockNum < NUM_BLOCKS_A53_64; BlockNum++)
{
XFsbl_SetTlbAttributes(BlockNum * BLOCK_SIZE_A53_64, ATTRIB_MEMORY_A53_64);
}
Xil_DCacheFlush();
#else
/* For A53 32bit*/
for(BlockNum = 0; BlockNum < NUM_BLOCKS_A53_32; BlockNum++)
{
XFsbl_SetTlbAttributes(BlockNum * BLOCK_SIZE_A53_32, ATTRIB_MEMORY_A53_32);
}
Xil_DCacheFlush();
#endif
#endif
/**
* Forcing the SD card detection signal to bypass the debouncing logic.
* This will ensure that SD controller doesn't end up waiting for long,
* fixed durations for card to be stable.
*/
XFsbl_Out32(IOU_SLCR_SD_CDN_CTRL,
(IOU_SLCR_SD_CDN_CTRL_SD1_CDN_CTRL_MASK |
IOU_SLCR_SD_CDN_CTRL_SD0_CDN_CTRL_MASK));
/**
* DDR Check if present
*/
/**
* Poweroff the unused blocks as per PSU
*/
END:
return Status;
}
/**
* This function does ECC Initialization of DDR memory
*
* @param none
*
* @return
* - XFSBL_SUCCESS for successful ECC Initialization
* - or ECC is not enabled for DDR
* - errors as mentioned in xfsbl_error.h
*
*****************************************************************************/
u32 XFsbl_DdrEccInit(void)
{
u32 Status = XFSBL_SUCCESS;
#if XPAR_PSU_DDRC_0_HAS_ECC
u32 LengthBytes = XFSBL_PS_DDR_END_ADDRESS - XFSBL_PS_DDR_INIT_START_ADDRESS;
u32 Length = 0;
u32 DestAddr = XFSBL_PS_DDR_INIT_START_ADDRESS;
u32 RegVal;
XFsbl_Printf(DEBUG_GENERAL,"\n\rInitializing DDR ECC\n\r");
Xil_DCacheDisable();
while (LengthBytes > 0) {
if (LengthBytes > GDMA_TRANSFER_MAX_LEN) {
Length = GDMA_TRANSFER_MAX_LEN;
} else {
Length = LengthBytes;
}
/* Wait until the DMA is in idle state */
do {
RegVal = XFsbl_In32(GDMA_CH0_ZDMA_CH_STATUS);
RegVal &= GDMA_CH0_ZDMA_CH_STATUS_STATE_MASK;
} while ((RegVal != GDMA_CH0_ZDMA_CH_STATUS_STATE_DONE) &&
(RegVal != GDMA_CH0_ZDMA_CH_STATUS_STATE_ERR));
/* Enable Simple (Write Only) Mode */
RegVal = XFsbl_In32(GDMA_CH0_ZDMA_CH_CTRL0);
RegVal &= (GDMA_CH0_ZDMA_CH_CTRL0_POINT_TYPE_MASK |
GDMA_CH0_ZDMA_CH_CTRL0_MODE_MASK);
RegVal |= (GDMA_CH0_ZDMA_CH_CTRL0_POINT_TYPE_NORMAL |
GDMA_CH0_ZDMA_CH_CTRL0_MODE_WR_ONLY);
XFsbl_Out32(GDMA_CH0_ZDMA_CH_CTRL0, RegVal);
/* Fill in the data to be written */
XFsbl_Out32(GDMA_CH0_ZDMA_CH_WR_ONLY_WORD0, XFSBL_ECC_INIT_VAL_WORD);
XFsbl_Out32(GDMA_CH0_ZDMA_CH_WR_ONLY_WORD1, XFSBL_ECC_INIT_VAL_WORD);
XFsbl_Out32(GDMA_CH0_ZDMA_CH_WR_ONLY_WORD2, XFSBL_ECC_INIT_VAL_WORD);
XFsbl_Out32(GDMA_CH0_ZDMA_CH_WR_ONLY_WORD3, XFSBL_ECC_INIT_VAL_WORD);
/* Write Destination Address */
XFsbl_Out32(GDMA_CH0_ZDMA_CH_DST_DSCR_WORD0, DestAddr);
/* Size to be Transferred (for write-only mode, only dest is needed)*/
XFsbl_Out32(GDMA_CH0_ZDMA_CH_DST_DSCR_WORD2, Length);
/* DMA Enable */
RegVal = XFsbl_In32(GDMA_CH0_ZDMA_CH_CTRL2);
RegVal |= GDMA_CH0_ZDMA_CH_CTRL2_EN_MASK;
XFsbl_Out32(GDMA_CH0_ZDMA_CH_CTRL2, RegVal);
/* Check the status of the transfer by polling on DMA Done */
do {
RegVal = XFsbl_In32(GDMA_CH0_ZDMA_CH_ISR);
RegVal &= GDMA_CH0_ZDMA_CH_ISR_DMA_DONE_MASK;
} while (RegVal != GDMA_CH0_ZDMA_CH_ISR_DMA_DONE_MASK);
/* Clear DMA status */
RegVal = XFsbl_In32(GDMA_CH0_ZDMA_CH_ISR);
RegVal |= GDMA_CH0_ZDMA_CH_ISR_DMA_DONE_MASK;
XFsbl_Out32(GDMA_CH0_ZDMA_CH_ISR, GDMA_CH0_ZDMA_CH_ISR_DMA_DONE_MASK);
/* Read the channel status for errors */
RegVal = XFsbl_In32(GDMA_CH0_ZDMA_CH_STATUS);
if (RegVal == GDMA_CH0_ZDMA_CH_STATUS_STATE_ERR) {
Status = XFSBL_ERROR_DDR_ECC_INIT;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_DDR_ECC_INIT\n\r");
Xil_DCacheEnable();
goto END;
}
LengthBytes -= Length;
DestAddr += Length;
}
Xil_DCacheEnable();
END:
#endif
return Status;
}
/**
*
* @param
*
* @return
*
* @note
*
*
*****************************************************************************/
static void XFsbl_FiqHandler (void)
{
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_FIQ_EXCEPTION\n\r");
XFsbl_ErrorLockDown(XFSBL_ERROR_FIQ_EXCEPTION);
}
/**
* This function initializes the primary boot device
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @return returns the error codes described in xfsbl_error.h on any error
* returns XFSBL_SUCCESS on success
*
******************************************************************************/
static u32 XFsbl_PrimaryBootDeviceInit(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
u32 BootMode=0U;
/**
* Read Boot Mode register and update the value
*/
BootMode = XFsbl_In32(CRL_APB_BOOT_MODE_USER) &
CRL_APB_BOOT_MODE_USER_BOOT_MODE_MASK;
FsblInstancePtr->PrimaryBootDevice = BootMode;
/**
* Enable drivers only if they are device boot modes
* Not required for JTAG modes
*/
if ( (BootMode == XFSBL_QSPI24_BOOT_MODE) ||
(BootMode == XFSBL_QSPI32_BOOT_MODE) ||
(BootMode == XFSBL_NAND_BOOT_MODE) ||
(BootMode == XFSBL_SD0_BOOT_MODE) ||
(BootMode == XFSBL_EMMC_BOOT_MODE) ||
(BootMode == XFSBL_SD1_BOOT_MODE) ||
(BootMode == XFSBL_SD1_LS_BOOT_MODE)) {
/**
* Initialize the WDT and CSU drivers
*/
#ifdef XFSBL_WDT_PRESENT
Status = XFsbl_InitWdt();
if (XFSBL_SUCCESS != Status) {
XFsbl_Printf(DEBUG_GENERAL,"WDT initialization failed \n\r");
goto END;
}
#endif
/* Initialize CSUDMA driver */
Status = XFsbl_CsuDmaInit();
if (XFSBL_SUCCESS != Status) {
goto END;
}
}
switch(BootMode)
{
/**
* For JTAG boot mode, it will be in while loop
*/
case XFSBL_JTAG_BOOT_MODE:
{
XFsbl_Printf(DEBUG_GENERAL,"In JTAG Boot Mode \n\r");
Status = XFSBL_STATUS_JTAG;
}
break;
case XFSBL_QSPI24_BOOT_MODE:
{
XFsbl_Printf(DEBUG_GENERAL,"QSPI 24bit Boot Mode \n\r");
#ifdef XFSBL_QSPI
/**
* Update the deviceops structure with necessary values
*/
FsblInstancePtr->DeviceOps.DeviceInit = XFsbl_Qspi24Init;
FsblInstancePtr->DeviceOps.DeviceCopy = XFsbl_Qspi24Copy;
FsblInstancePtr->DeviceOps.DeviceRelease = XFsbl_Qspi24Release;
#else
/**
* This bootmode is not supported in this release
*/
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_BOOT_MODE\n\r");
Status = XFSBL_ERROR_UNSUPPORTED_BOOT_MODE;
#endif
}
break;
case XFSBL_QSPI32_BOOT_MODE:
{
XFsbl_Printf(DEBUG_GENERAL,"QSPI 32 bit Boot Mode \n\r");
#ifdef XFSBL_QSPI
/**
* Update the deviceops structure with necessary values
*
*/
FsblInstancePtr->DeviceOps.DeviceInit = XFsbl_Qspi32Init;
FsblInstancePtr->DeviceOps.DeviceCopy = XFsbl_Qspi32Copy;
FsblInstancePtr->DeviceOps.DeviceRelease = XFsbl_Qspi32Release;
#else
/**
* This bootmode is not supported in this release
*/
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_BOOT_MODE\n\r");
Status = XFSBL_ERROR_UNSUPPORTED_BOOT_MODE;
#endif
}
break;
case XFSBL_NAND_BOOT_MODE:
{
XFsbl_Printf(DEBUG_GENERAL,"NAND Boot Mode \n\r");
#ifdef XFSBL_NAND
/**
* Update the deviceops structure with necessary values
*
*/
FsblInstancePtr->DeviceOps.DeviceInit = XFsbl_NandInit;
FsblInstancePtr->DeviceOps.DeviceCopy = XFsbl_NandCopy;
FsblInstancePtr->DeviceOps.DeviceRelease =
XFsbl_NandRelease;
#else
/**
* This bootmode is not supported in this release
*/
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_BOOT_MODE\n\r");
Status = XFSBL_ERROR_UNSUPPORTED_BOOT_MODE;
#endif
} break;
case XFSBL_SD0_BOOT_MODE:
case XFSBL_EMMC_BOOT_MODE:
{
if (BootMode == XFSBL_SD0_BOOT_MODE) {
XFsbl_Printf(DEBUG_GENERAL,"SD0 Boot Mode \n\r");
}
else {
XFsbl_Printf(DEBUG_GENERAL,"eMMC Boot Mode \n\r");
}
#ifdef XFSBL_SD_0
/**
* Update the deviceops structure with necessary values
*/
FsblInstancePtr->DeviceOps.DeviceInit = XFsbl_SdInit;
FsblInstancePtr->DeviceOps.DeviceCopy = XFsbl_SdCopy;
FsblInstancePtr->DeviceOps.DeviceRelease = XFsbl_SdRelease;
#else
/**
* This bootmode is not supported in this release
*/
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_BOOT_MODE\n\r");
Status = XFSBL_ERROR_UNSUPPORTED_BOOT_MODE;
#endif
} break;
case XFSBL_SD1_BOOT_MODE:
case XFSBL_SD1_LS_BOOT_MODE:
{
if (BootMode == XFSBL_SD1_BOOT_MODE) {
XFsbl_Printf(DEBUG_GENERAL, "SD1 Boot Mode \n\r");
}
else {
XFsbl_Printf(DEBUG_GENERAL,
"SD1 with level shifter Boot Mode \n\r");
}
#ifdef XFSBL_SD_1
/**
* Update the deviceops structure with necessary values
*/
FsblInstancePtr->DeviceOps.DeviceInit = XFsbl_SdInit;
FsblInstancePtr->DeviceOps.DeviceCopy = XFsbl_SdCopy;
FsblInstancePtr->DeviceOps.DeviceRelease = XFsbl_SdRelease;
#else
/**
* This bootmode is not supported in this release
*/
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_BOOT_MODE\n\r");
Status = XFSBL_ERROR_UNSUPPORTED_BOOT_MODE;
#endif
} break;
default:
{
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_BOOT_MODE\n\r");
Status = XFSBL_ERROR_UNSUPPORTED_BOOT_MODE;
} break;
}
/**
* In case of error or Jtag boot, goto end
*/
if (XFSBL_SUCCESS != Status) {
goto END;
}
/**
* Initialize the Device Driver
*/
Status = FsblInstancePtr->DeviceOps.DeviceInit(BootMode);
if (XFSBL_SUCCESS != Status) {
goto END;
}
END:
return Status;
}
/**
* This function initializes the processor and updates the cluster id
* which indicates CPU on which fsbl is running
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @return returns the error codes described in xfsbl_error.h on any error
* returns XFSBL_SUCCESS on success
*
******************************************************************************/
static u32 XFsbl_ProcessorInit(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
//u64 ClusterId=0U;
PTRSIZE ClusterId=0U;
u32 RegValue;
u32 Index=0U;
/**
* Read the cluster ID and Update the Processor ID
* Initialize the processor settings that are not done in
* BSP startup code
*/
#ifdef XFSBL_A53
ClusterId = mfcp(MPIDR_EL1);
#else
ClusterId = mfcp(XREG_CP15_MULTI_PROC_AFFINITY);
#endif
XFsbl_Printf(DEBUG_INFO,"Cluster ID 0x%0lx\n\r", ClusterId);
if (XFSBL_PLATFORM == XFSBL_PLATFORM_QEMU) {
/**
* Remmaping for R5 in QEMU
*/
if (ClusterId == 0x80000004U) {
ClusterId = 0xC0000100U;
} else if (ClusterId == 0x80000005U) {
/* this corresponds to R5-1 */
Status = XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID\n\r");
goto END;
} else {
/* For MISRA C compliance */
}
}
/* store the processor ID based on the cluster ID */
if ((ClusterId & XFSBL_CLUSTER_ID_MASK) == XFSBL_A53_PROCESSOR) {
XFsbl_Printf(DEBUG_GENERAL,"Running on A53-0 ");
FsblInstancePtr->ProcessorID =
XIH_PH_ATTRB_DEST_CPU_A53_0;
#ifdef __aarch64__
/* Running on A53 64-bit */
XFsbl_Printf(DEBUG_GENERAL,"(64-bit) Processor \n\r");
FsblInstancePtr->A53ExecState = XIH_PH_ATTRB_A53_EXEC_ST_AA64;
#else
/* Running on A53 32-bit */
XFsbl_Printf(DEBUG_GENERAL,"(32-bit) Processor \n\r");
FsblInstancePtr->A53ExecState = XIH_PH_ATTRB_A53_EXEC_ST_AA32;
#endif
} else if ((ClusterId & XFSBL_CLUSTER_ID_MASK) == XFSBL_R5_PROCESSOR) {
/* A53ExecState is not valid for R5 */
FsblInstancePtr->A53ExecState = XIH_INVALID_EXEC_ST;
RegValue = XFsbl_In32(RPU_RPU_GLBL_CNTL);
if ((RegValue & RPU_RPU_GLBL_CNTL_SLSPLIT_MASK) == 0U) {
XFsbl_Printf(DEBUG_GENERAL,
"Running on R5 Processor in Lockstep \n\r");
FsblInstancePtr->ProcessorID =
XIH_PH_ATTRB_DEST_CPU_R5_L;
} else {
XFsbl_Printf(DEBUG_GENERAL,
"Running on R5-0 Processor \n\r");
FsblInstancePtr->ProcessorID =
XIH_PH_ATTRB_DEST_CPU_R5_0;
}
/**
* Update the Vector locations in R5 TCM
*/
while (Index<32U) {
XFsbl_Out32(Index, 0U);
XFsbl_Out32(Index, XFSBL_R5_VECTOR_VALUE);
Index += 4;
}
} else {
Status = XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID;
XFsbl_Printf(DEBUG_GENERAL,
"XFSBL_ERROR_UNSUPPORTED_CLUSTER_ID\n\r");
goto END;
}
/**
* Register the exception handlers
*/
XFsbl_RegisterHandlers();
END:
return Status;
}
/** This is the FSBL main function and is implemented stage wise.
*
* @param None
*
* @return None
*
*****************************************************************************/
int main(void )
{
/**
* Local variables
*/
u32 FsblStatus = XFSBL_SUCCESS;
u32 FsblStage = XFSBL_STAGE1;
u32 PartitionNum=0U;
u32 EarlyHandoff = FALSE;
/**
* Initialize globals.
*/
FsblInstancePtr.ErrorCode = FsblStatus;
while (1) {
switch (FsblStage)
{
case XFSBL_STAGE1:
{
/**
* Initialize the system
*/
XFsbl_CfgInitialize(&FsblInstancePtr);
FsblStatus = XFsbl_Initialize(&FsblInstancePtr);
if (XFSBL_SUCCESS != FsblStatus)
{
FsblStatus += XFSBL_ERROR_STAGE_1;
FsblStage = XFSBL_STAGE_ERR;
} else {
/**
*
* Include the code for FSBL time measurements
* Initialize the global timer and get the value
*/
FsblStage = XFSBL_STAGE2;
}
}break;
case XFSBL_STAGE2:
{
XFsbl_Printf(DEBUG_INFO,
"================= In Stage 2 ============ \n\r");
/**
* Primary Device
* Secondary boot device
* DeviceOps
* image header
* partition header
*/
FsblStatus = XFsbl_BootDeviceInitAndValidate(&FsblInstancePtr);
if ( (XFSBL_SUCCESS != FsblStatus) &&
(XFSBL_STATUS_JTAG != FsblStatus) )
{
XFsbl_Printf(DEBUG_GENERAL,"Boot Device "
"Initialization failed 0x%0lx\n\r", FsblStatus);
FsblStatus += XFSBL_ERROR_STAGE_2;
FsblStage = XFSBL_STAGE_ERR;
} else if (XFSBL_STATUS_JTAG == FsblStatus) {
/**
* This is JTAG boot mode, go to the handoff stage
*/
FsblStage = XFSBL_STAGE4;
} else {
XFsbl_Printf(DEBUG_INFO,"Initialization Success \n\r");
/**
* Start the partition loading from 1
* 0th partition will be FSBL
*/
PartitionNum = 0x1U;
FsblStage = XFSBL_STAGE3;
}
} break;
case XFSBL_STAGE3:
{
XFsbl_Printf(DEBUG_INFO,
"======= In Stage 3, Partition No:%d ======= \n\r",
PartitionNum);
/**
* Load the partitions
* image header
* partition header
* partition parameters
*/
FsblStatus = XFsbl_PartitionLoad(&FsblInstancePtr,
PartitionNum);
if (XFSBL_SUCCESS != FsblStatus)
{
/**
* Error
*/
XFsbl_Printf(DEBUG_GENERAL,"Partition %d Load Failed, 0x%0lx\n\r",
PartitionNum, FsblStatus);
FsblStatus += XFSBL_ERROR_STAGE_3;
FsblStage = XFSBL_STAGE_ERR;
} else {
XFsbl_Printf(DEBUG_INFO,"Partition %d Load Success \n\r",
PartitionNum);
/**
* Check loading all partitions is completed
*/
FsblStatus = XFsbl_CheckEarlyHandoff(&FsblInstancePtr, PartitionNum);
if (PartitionNum <
(FsblInstancePtr.ImageHeader.ImageHeaderTable.NoOfPartitions-1U))
{
if (TRUE == FsblStatus) {
EarlyHandoff = TRUE;
FsblStage = XFSBL_STAGE4;
}
else {
/**
* No need to change the Fsbl Stage
* Load the next partition
*/
PartitionNum++;
}
} else {
/**
* No more partitions present, go to handoff stage
*/
XFsbl_Printf(DEBUG_INFO,"All Partitions Loaded \n\r");
FsblStage = XFSBL_STAGE4;
EarlyHandoff = FsblStatus;
}
} /* End of else loop for Load Success */
} break;
case XFSBL_STAGE4:
{
XFsbl_Printf(DEBUG_INFO,
"================= In Stage 4 ============ \n\r");
/**
* Handoff to the applications
* Handoff address
* xip
* ps7 post config
*/
FsblStatus = XFsbl_Handoff(&FsblInstancePtr, PartitionNum, EarlyHandoff);
if (XFSBL_STATUS_CONTINUE_PARTITION_LOAD == FsblStatus) {
XFsbl_Printf(DEBUG_INFO,"Early handoff to a application complete \n\r");
XFsbl_Printf(DEBUG_INFO,"Continuing to load remaining partitions \n\r");
PartitionNum++;
FsblStage = XFSBL_STAGE3;
}
else if (XFSBL_STATUS_CONTINUE_OTHER_HANDOFF == FsblStatus) {
XFsbl_Printf(DEBUG_INFO,"Early handoff to a application complete \n\r");
XFsbl_Printf(DEBUG_INFO,"Continuing handoff to other applications, if present \n\r");
EarlyHandoff = FALSE;
}
else if (XFSBL_SUCCESS != FsblStatus) {
/**
* Error
*/
XFsbl_Printf(DEBUG_GENERAL,"Handoff Failed 0x%0lx\n\r", FsblStatus);
FsblStatus += XFSBL_ERROR_STAGE_4;
FsblStage = XFSBL_STAGE_ERR;
} else {
/**
* we should never be here
*/
FsblStage = XFSBL_STAGE_DEFAULT;
}
} break;
case XFSBL_STAGE_ERR:
{
XFsbl_Printf(DEBUG_INFO,
"================= In Stage Err ============ \n\r");
XFsbl_ErrorLockDown(FsblStatus);
/**
* we should never be here
*/
FsblStage = XFSBL_STAGE_DEFAULT;
}break;
case XFSBL_STAGE_DEFAULT:
default:
{
/**
* we should never be here
*/
XFsbl_Printf(DEBUG_GENERAL,"In default stage: "
"We should never be here \n\r");
/**
* Exit FSBL
*/
XFsbl_HandoffExit(0U, XFSBL_NO_HANDOFFEXIT);
}break;
} /* End of switch(FsblStage) */
} /* End of while(1) */
/**
* We should never be here
*/
XFsbl_Printf(DEBUG_GENERAL,"In default stage: "
"We should never be here \n\r");
/**
* Exit FSBL
*/
XFsbl_HandoffExit(0U, XFSBL_NO_HANDOFFEXIT);
return 0;
}
/**
* Configure the RSA and SHA for the SPK
* Signature verification.
* If SPK Signature verification fails
* then return unique error code saying
* XFSBL_STAGE3_SPK_SIGN_VERIF_ERROR.
*
* @param
*
* @return
*
******************************************************************************/
u32 XFsbl_SpkVer(XFsblPs *FsblInstancePtr , u64 AcOffset, u32 HashLen,
u32 PartitionNum)
{
u8 SpkHash[XFSBL_HASH_TYPE_SHA3] __attribute__ ((aligned (4)));
u8 * PpkModular = (u8 *)NULL;
u8 * PpkModularEx = (u8 *)NULL;
u32 PpkExp = 0;
u8 * AcPtr = (u8*) (PTRSIZE) AcOffset;
u32 Status = XFSBL_SUCCESS;
void * ShaCtx = (void * )NULL;
u8 XFsbl_RsaSha3Array[512];
#ifdef XFSBL_SHA2
sha2_context ShaCtxObj;
ShaCtx = &ShaCtxObj;
#endif
#ifndef XFSBL_PS_DDR
XFsblPs_PartitionHeader * PartitionHeader;
u32 DestinationDevice = 0U;
PartitionHeader =
&FsblInstancePtr->ImageHeader.PartitionHeader[PartitionNum];
DestinationDevice = XFsbl_GetDestinationDevice(PartitionHeader);
if (DestinationDevice == XIH_PH_ATTRB_DEST_DEVICE_PL)
{
/*
* If it is DDR less system, bitstream chunk containing
* Authentication Certificate has to be read from boot device
*/
if(XFSBL_SUCCESS != FsblInstancePtr->DeviceOps.DeviceCopy(
(INTPTR)AcPtr, (PTRSIZE)ReadBuffer,
XFSBL_AUTH_CERT_MIN_SIZE)) {
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_SpkVer: Device to OCM copy of certificate failed \r\n");
Status = XFSBL_ERROR_SPK_RSA_DECRYPT;
goto END;
}
/* Repoint Auth. cert. pointer to OCM buffer beginning*/
AcPtr = ReadBuffer;
}
#endif
/* Re-initialize CSU DMA. This is a workaround and need to be removed */
Status = XFsbl_CsuDmaInit();
if (XST_SUCCESS != Status) {
goto END;
}
(void)XFsbl_ShaStart(ShaCtx, HashLen);
/* Hash the PPK + SPK choice */
XFsbl_ShaUpdate(ShaCtx, AcPtr, 8, HashLen);
/* Set PPK pointer */
AcPtr += XFSBL_RSA_AC_ALIGN;
PpkModular = (u8 *)AcPtr;
AcPtr += XFSBL_PPK_MOD_SIZE;
PpkModularEx = (u8 *)AcPtr;
AcPtr += XFSBL_PPK_MOD_EXT_SIZE;
PpkExp = *((u32 *)AcPtr);
AcPtr += XFSBL_RSA_AC_ALIGN;
XFsbl_Printf(DEBUG_DETAILED,
"XFsbl_SpkVer: Ppk Mod %0x, Ppk Mod Ex %0x, Ppk Exp %0x\r\n",
PpkModular, PpkModularEx, PpkExp);
/* Calculate SPK + Auth header Hash */
XFsbl_ShaUpdate(ShaCtx, (u8 *)AcPtr, XFSBL_SPK_SIZE, HashLen);
XFsbl_ShaFinish(ShaCtx, (u8 *)SpkHash, HashLen);
/* Set SPK Signature pointer */
AcPtr += XFSBL_SPK_SIZE;
XSecure_RsaInitialize(&SecureRsa, PpkModular,
PpkModularEx, (u8 *)&PpkExp);
/* Decrypt SPK Signature */
if(XFSBL_SUCCESS !=
XSecure_RsaDecrypt(&SecureRsa, AcPtr, XFsbl_RsaSha3Array))
{
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_SpkVer: XFSBL_ERROR_SPK_RSA_DECRYPT\r\n");
Status = XFSBL_ERROR_SPK_RSA_DECRYPT;
goto END;
}
/* Authenticate SPK Signature */
if(XFSBL_SUCCESS != XSecure_RsaSignVerification(XFsbl_RsaSha3Array,
SpkHash, HashLen))
{
XFsbl_PrintArray(DEBUG_INFO, SpkHash,
HashLen, "Calculated SPK Hash");
XFsbl_PrintArray(DEBUG_INFO, XFsbl_RsaSha3Array,
512, "RSA decrypted Hash");
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_SpkVer: XFSBL_ERROR_SPK_SIGNATURE\r\n");
Status = XFSBL_ERROR_SPK_SIGNATURE;
}
END:
return Status;
}
/**
* Configure the RSA and SHA for the
* Boot Header Signature verification.
* If Boot Header Signature verification
* fails then return unique error code saying
* XFSBL_STAGE3_BOOT_HDR_SIGN_VERIF_ERROR.
*
* @param
*
* @return
*
******************************************************************************/
u32 XFsbl_PartitionSignVer(XFsblPs *FsblInstancePtr, u64 PartitionOffset,
u32 PartitionLen, u64 AcOffset, u32 HashLen,
u32 PartitionNum)
{
u8 PartitionHash[XFSBL_HASH_TYPE_SHA3] __attribute__ ((aligned (4)));
u8 * SpkModular = (u8 *)NULL;
u8 * SpkModularEx = (u8 *)NULL;
u32 SpkExp = 0;
u8 * AcPtr = (u8*)(PTRSIZE) AcOffset;
u32 Status = XFSBL_SUCCESS;
u32 HashDataLen=0U;
#ifndef XFSBL_PS_DDR
void * ShaCtx = (void * )NULL;
#endif
u8 XFsbl_RsaSha3Array[512];
#ifdef XFSBL_SHA2
sha2_context ShaCtxObj;
ShaCtx = &ShaCtxObj;
#endif
XFsbl_Printf(DEBUG_INFO, "Doing Partition Sign verification\r\n");
/**
* hash to be calculated will be total length with AC minus
* signature size
*/
HashDataLen = PartitionLen - XFSBL_FSBL_SIG_SIZE;
/* Calculate Partition Hash */
#ifndef XFSBL_PS_DDR
XFsblPs_PartitionHeader * PartitionHeader;
u32 DestinationDevice = 0U;
PartitionHeader =
&FsblInstancePtr->ImageHeader.PartitionHeader[PartitionNum];
DestinationDevice = XFsbl_GetDestinationDevice(PartitionHeader);
if (DestinationDevice == XIH_PH_ATTRB_DEST_DEVICE_PL)
{
/**
* bitstream partion in DDR less system, Chunk by chunk copy
* into OCM and update SHA module
*/
u32 NumChunks = 0U;
u32 RemainingBytes = 0U;
u32 Index = 0U;
u32 StartAddrByte = PartitionOffset;
NumChunks = HashDataLen / READ_BUFFER_SIZE;
RemainingBytes = (HashDataLen % READ_BUFFER_SIZE);
/* Start the SHA engine */
(void)XFsbl_ShaStart(ShaCtx, HashLen);
XFsbl_Printf(DEBUG_INFO,
"XFsbl_PartitionVer: NumChunks :%0d, RemainingBytes : %0d \r\n",
NumChunks, RemainingBytes);
for(Index = 0; Index < NumChunks; Index++)
{
if(XFSBL_SUCCESS !=FsblInstancePtr->DeviceOps.DeviceCopy(
StartAddrByte, (PTRSIZE)ReadBuffer,
READ_BUFFER_SIZE))
{
XFsbl_Printf(DEBUG_GENERAL,
"XFsblPartitionVer: Device "
"to OCM copy of partition failed \r\n");
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_PartitionVer: XFSBL_ERROR_PART_RSA_DECRYPT\r\n");
Status = XFSBL_ERROR_PART_RSA_DECRYPT;
goto END;
}
XFsbl_ShaUpdate(ShaCtx, (u8 *)ReadBuffer,
READ_BUFFER_SIZE, HashLen);
StartAddrByte += READ_BUFFER_SIZE;
}
/* Send the residual bytes if Size is not buffer size multiple */
if(RemainingBytes != 0)
{
if(XFSBL_SUCCESS!=FsblInstancePtr->DeviceOps.DeviceCopy(
StartAddrByte, (PTRSIZE)ReadBuffer,
RemainingBytes))
{
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_PartitionVer: XFSBL_ERROR_PART_RSA_DECRYPT\r\n");
Status = XFSBL_ERROR_PART_RSA_DECRYPT;
goto END;
}
XFsbl_ShaUpdate(ShaCtx, (u8 *)ReadBuffer,
RemainingBytes, HashLen);
}
XFsbl_ShaFinish(ShaCtx, PartitionHash, HashLen);
/**
* Copy Auth. Certificate to OCM buffer location
* Assign AcPtr to OCM buffer location
*/
if(XFSBL_SUCCESS != FsblInstancePtr->DeviceOps.DeviceCopy(
(u32)(INTPTR)AcPtr, (PTRSIZE)ReadBuffer,
XFSBL_AUTH_CERT_MIN_SIZE)) {
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_PartitionVer: Flash to OCM copy failed \r\n");
Status = XFSBL_ERROR_SPK_RSA_DECRYPT;
goto END;
}
/* Repoint Auth. Certificate pointer to start of OCM buffer */
AcPtr = ReadBuffer;
}
else
{
XFsbl_Printf(DEBUG_INFO, "partver: sha calc. "
"for non bs DDR less part \r\n");
/* SHA calculation for non-bitstream, DDR less partitions */
XFsbl_ShaDigest((const u8 *)(PTRSIZE)PartitionOffset,
HashDataLen, PartitionHash, HashLen);
}
#else
/* SHA calculation in DDRful systems */
XFsbl_ShaDigest((const u8 *)(PTRSIZE)PartitionOffset,
HashDataLen, PartitionHash, HashLen);
#endif
/* Set SPK pointer */
AcPtr += (XFSBL_RSA_AC_ALIGN + XFSBL_PPK_SIZE);
SpkModular = (u8 *)AcPtr;
AcPtr += XFSBL_SPK_MOD_SIZE;
SpkModularEx = (u8 *)AcPtr;
AcPtr += XFSBL_SPK_MOD_EXT_SIZE;
SpkExp = *((u32 *)AcPtr);
AcPtr += XFSBL_RSA_AC_ALIGN;
/* Increment by SPK Signature pointer */
AcPtr += XFSBL_SPK_SIG_SIZE;
/* Increment by BHDR Signature pointer */
AcPtr += XFSBL_BHDR_SIG_SIZE;
XFsbl_Printf(DEBUG_DETAILED,
"XFsbl_PartVer: Spk Mod %0x, Spk Mod Ex %0x, Spk Exp %0x\r\n",
SpkModular, SpkModularEx, SpkExp);
XFsbl_Printf(DEBUG_INFO,
"Partition Verification done \r\n");
XSecure_RsaInitialize(&SecureRsa, SpkModular,
SpkModularEx, (u8 *)&SpkExp);
/* Decrypt Partition Signature. */
if(XFSBL_SUCCESS !=
XSecure_RsaDecrypt(&SecureRsa, AcPtr, XFsbl_RsaSha3Array))
{
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_SpkVer: XFSBL_ERROR_PART_RSA_DECRYPT\r\n");
Status = XFSBL_ERROR_PART_RSA_DECRYPT;
goto END;
}
/* Authenticate Partition Signature */
if(XFSBL_SUCCESS != XSecure_RsaSignVerification(XFsbl_RsaSha3Array,
PartitionHash, HashLen))
{
XFsbl_PrintArray(DEBUG_INFO, PartitionHash,
HashLen, "Calculated Partition Hash");
XFsbl_PrintArray(DEBUG_INFO, XFsbl_RsaSha3Array,
512, "RSA decrypted Hash");
XFsbl_Printf(DEBUG_GENERAL,
"XFsbl_PartVer: XFSBL_ERROR_PART_SIGNATURE\r\n");
Status = XFSBL_ERROR_PART_SIGNATURE;
goto END;
}
END:
return Status;
}
/**
*
* @param
*
* @return
*
* @note
*
*****************************************************************************/
static void XFsbl_PreFetchAbortHandler (void)
{
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_PREFETCH_ABORT_EXCEPTION\n\r");
XFsbl_ErrorLockDown(XFSBL_ERROR_PREFETCH_ABORT_EXCEPTION);
}
/**
*
* @param
*
* @return
*
* @note
*
*
*****************************************************************************/
static void XFsbl_DataAbortHandler (void)
{
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_DATA_ABORT_EXCEPTION\n\r");
XFsbl_ErrorLockDown(XFSBL_ERROR_DATA_ABORT_EXCEPTION);
}
/**
* This function validates the image header
*
* @param FsblInstancePtr is pointer to the XFsbl Instance
*
* @return returns the error codes described in xfsbl_error.h on any error
* returns XFSBL_SUCCESS on success
*
******************************************************************************/
static u32 XFsbl_ValidateHeader(XFsblPs * FsblInstancePtr)
{
u32 Status = XFSBL_SUCCESS;
u32 MultiBootOffset=0U;
u32 BootHdrAttrb=0U;
u32 FlashImageOffsetAddress=0U;
u32 EfuseCtrl=0U;
/**
* Read the Multiboot Register
*/
MultiBootOffset = XFsbl_In32(CSU_CSU_MULTI_BOOT);
XFsbl_Printf(DEBUG_INFO,"Multiboot Reg : 0x%0lx \n\r", MultiBootOffset);
/**
* Calculate the Flash Offset Address
* For file system based devices, Flash Offset Address should be 0 always
*/
if ((FsblInstancePtr->PrimaryBootDevice == XFSBL_SD0_BOOT_MODE) ||
(FsblInstancePtr->PrimaryBootDevice == XFSBL_EMMC_BOOT_MODE) ||
(FsblInstancePtr->PrimaryBootDevice == XFSBL_SD1_BOOT_MODE) ||
(FsblInstancePtr->PrimaryBootDevice == XFSBL_SD1_LS_BOOT_MODE))
{
FsblInstancePtr->ImageOffsetAddress = 0x0U;
} else {
FsblInstancePtr->ImageOffsetAddress =
MultiBootOffset * XFSBL_IMAGE_SEARCH_OFFSET;
}
FlashImageOffsetAddress = FsblInstancePtr->ImageOffsetAddress;
/**
* Read Boot Image attributes
*/
Status = FsblInstancePtr->DeviceOps.DeviceCopy(FlashImageOffsetAddress
+ XIH_BH_IMAGE_ATTRB_OFFSET,
(PTRSIZE ) &BootHdrAttrb, XIH_FIELD_LEN);
if (XFSBL_SUCCESS != Status) {
XFsbl_Printf(DEBUG_GENERAL,"Device Copy Failed \n\r");
goto END;
}
FsblInstancePtr->BootHdrAttributes = BootHdrAttrb;
/**
* Read Image Header and validate Image Header Table
*/
Status = XFsbl_ReadImageHeader(&FsblInstancePtr->ImageHeader,
&FsblInstancePtr->DeviceOps,
FlashImageOffsetAddress,
FsblInstancePtr->ProcessorID);
if (XFSBL_SUCCESS != Status) {
goto END;
}
/**
* Read Efuse bit and check Boot Header for Authentication
*/
EfuseCtrl = XFsbl_In32(EFUSE_SEC_CTRL);
if (((EfuseCtrl & EFUSE_SEC_CTRL_RSA_EN_MASK) != 0) ||
((BootHdrAttrb & XIH_BH_IMAGE_ATTRB_RSA_MASK)
== XIH_BH_IMAGE_ATTRB_RSA_MASK)) {
XFsbl_Printf(DEBUG_INFO,"Authentication Enabled\r\n");
#ifdef XFSBL_RSA
/**
* Authenticate the image header
*/
#else
XFsbl_Printf(DEBUG_GENERAL,"Rsa code not Enabled\r\n");
Status = XFSBL_ERROR_RSA_NOT_ENABLED;
goto END;
#endif
}
END:
return Status;
}
/**
* This function is used to copy the data from QSPI flash to destination
* address
*
* @param SrcAddress is the address of the QSPI flash where copy should
* start from
*
* @param DestAddress is the address of the destination where it
* should copy to
*
* @param Length Length of the bytes to be copied
*
* @return
* - XFSBL_SUCCESS for successful copy
* - errors as mentioned in xfsbl_error.h
*
*****************************************************************************/
u32 XFsbl_Qspi32Copy(u32 SrcAddress, PTRSIZE DestAddress, u32 Length)
{
u32 Status = XFSBL_SUCCESS;
u32 QspiAddr=0;
u32 RemainingBytes=0;
u32 TransferBytes=0;
u32 DiscardByteCnt;
XFsbl_Printf(DEBUG_INFO,"QSPI Reading Src 0x%0lx, Dest %0lx, Length %0lx\r\n",
SrcAddress, DestAddress, Length);
/**
* Check the read length with Qspi flash size
*/
if ((SrcAddress + Length) > QspiFlashSize)
{
Status = XFSBL_ERROR_QSPI_LENGTH;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_QSPI_LENGTH\r\n");
goto END;
}
/**
* Update no of bytes to be copied
*/
RemainingBytes = Length;
while(RemainingBytes > 0) {
if (RemainingBytes > DMA_DATA_TRAN_SIZE)
{
TransferBytes = DMA_DATA_TRAN_SIZE;
} else {
TransferBytes = RemainingBytes;
}
/**
* Translate address based on type of connection
* If stacked assert the slave select based on address
*/
QspiAddr = XFsbl_GetQspiAddr((u32 )SrcAddress);
XFsbl_Printf(DEBUG_INFO,".");
XFsbl_Printf(DEBUG_DETAILED,
"QSPI Read Src 0x%0lx, Dest %0lx, Length %0lx\r\n",
QspiAddr, DestAddress, TransferBytes);
/**
* Setup the read command with the specified address and data for the
* Flash
*/
WriteBuffer[COMMAND_OFFSET] = ReadCommand;
WriteBuffer[ADDRESS_1_OFFSET] = (u8)((QspiAddr & 0xFF000000) >> 24);
WriteBuffer[ADDRESS_2_OFFSET] = (u8)((QspiAddr & 0xFF0000) >> 16);
WriteBuffer[ADDRESS_3_OFFSET] = (u8)((QspiAddr & 0xFF00) >> 8);
WriteBuffer[ADDRESS_4_OFFSET] = (u8)(QspiAddr & 0xFF);
DiscardByteCnt = 5;
FlashMsg[0].TxBfrPtr = WriteBuffer;
FlashMsg[0].RxBfrPtr = NULL;
FlashMsg[0].ByteCount = DiscardByteCnt;
FlashMsg[0].BusWidth = XQSPIPSU_SELECT_MODE_SPI;
FlashMsg[0].Flags = XQSPIPSU_MSG_FLAG_TX;
/*
* It is recommended to have a separate entry for dummy
*/
if ((ReadCommand == FAST_READ_CMD_32BIT) ||
(ReadCommand == DUAL_READ_CMD_32BIT) ||
(ReadCommand == QUAD_READ_CMD_32BIT)) {
/* Update Dummy cycles as per flash specs for QUAD IO */
/*
* It is recommended that Bus width value during dummy
* phase should be same as data phase
*/
if (ReadCommand == FAST_READ_CMD_32BIT) {
FlashMsg[1].BusWidth = XQSPIPSU_SELECT_MODE_SPI;
}
if (ReadCommand == DUAL_READ_CMD_32BIT) {
FlashMsg[1].BusWidth = XQSPIPSU_SELECT_MODE_DUALSPI;
}
if (ReadCommand == QUAD_READ_CMD_32BIT) {
FlashMsg[1].BusWidth = XQSPIPSU_SELECT_MODE_QUADSPI;
}
FlashMsg[1].TxBfrPtr = NULL;
FlashMsg[1].RxBfrPtr = NULL;
FlashMsg[1].ByteCount = DUMMY_CLOCKS;
FlashMsg[1].Flags = 0;
}
if (ReadCommand == FAST_READ_CMD_32BIT) {
FlashMsg[2].BusWidth = XQSPIPSU_SELECT_MODE_SPI;
}
if (ReadCommand == DUAL_READ_CMD_32BIT) {
FlashMsg[2].BusWidth = XQSPIPSU_SELECT_MODE_DUALSPI;
}
if (ReadCommand == QUAD_READ_CMD_32BIT) {
FlashMsg[2].BusWidth = XQSPIPSU_SELECT_MODE_QUADSPI;
}
FlashMsg[2].TxBfrPtr = NULL;
FlashMsg[2].RxBfrPtr = (u8 *)DestAddress;
FlashMsg[2].ByteCount = TransferBytes;
FlashMsg[2].Flags = XQSPIPSU_MSG_FLAG_RX;
if(QspiPsuInstancePtr->Config.ConnectionMode ==
XQSPIPSU_CONNECTION_MODE_PARALLEL){
FlashMsg[2].Flags |= XQSPIPSU_MSG_FLAG_STRIPE;
}
/**
* Send the read command to the Flash to read the specified number
* of bytes from the Flash, send the read command and address and
* receive the specified number of bytes of data in the data buffer
*/
Status = XQspiPsu_PolledTransfer(QspiPsuInstancePtr, FlashMsg, 3);
if (Status != XST_SUCCESS) {
Status = XFSBL_ERROR_QSPI_READ;
XFsbl_Printf(DEBUG_GENERAL,"XFSBL_ERROR_QSPI_READ\r\n");
goto END;
}
/**
* Update the variables
*/
RemainingBytes -= TransferBytes;
DestAddress += TransferBytes;
SrcAddress += TransferBytes;
}
END:
return Status;
}