int
viputafter(UNUSED(char **args))
{
Cutbuffer buf = &cutbuf;
int n = zmult;
startvichange(-1);
if (n < 0)
return 1;
if (zmod.flags & MOD_VIBUF)
buf = &vibuf[zmod.vibuf];
if (!buf->buf)
return 1;
if(buf->flags & CUTBUFFER_LINE) {
zlecs = findeol();
spaceinline(buf->len + 1);
zleline[zlecs++] = ZWC('\n');
ZS_memcpy(zleline + zlecs, buf->buf, buf->len);
vifirstnonblank(zlenoargs);
} else {
if (zlecs != findeol())
INCCS();
while (n--) {
spaceinline(buf->len);
ZS_memcpy(zleline + zlecs, buf->buf, buf->len);
zlecs += buf->len;
}
if (zlecs)
DECCS();
}
return 0;
}
int
quoteregion(UNUSED(char **args))
{
ZLE_STRING_T str;
size_t len;
int extra = invicmdmode();
if (mark > zlell)
mark = zlell;
if (region_active == 2) {
int a, b;
regionlines(&a, &b);
zlecs = a;
mark = b;
extra = 0;
} else if (mark < zlecs) {
int tmp = mark;
mark = zlecs;
zlecs = tmp;
}
if (extra)
INCPOS(mark);
str = (ZLE_STRING_T)hcalloc((len = mark - zlecs) *
ZLE_CHAR_SIZE);
ZS_memcpy(str, zleline + zlecs, len);
foredel(len, CUT_RAW);
str = makequote(str, &len);
spaceinline(len);
ZS_memcpy(zleline + zlecs, str, len);
mark = zlecs;
zlecs += len;
return 0;
}
void
mkundoent(void)
{
int pre, suf;
int sh = zlell < lastll ? zlell : lastll;
struct change *ch;
UNMETACHECK();
if(lastll == zlell && !ZS_memcmp(lastline, zleline, zlell)) {
lastcs = zlecs;
return;
}
for(pre = 0; pre < sh && zleline[pre] == lastline[pre]; )
pre++;
for(suf = 0; suf < sh - pre &&
zleline[zlell - 1 - suf] == lastline[lastll - 1 - suf]; )
suf++;
ch = zalloc(sizeof(*ch));
ch->next = NULL;
ch->hist = histline;
ch->off = pre;
ch->old_cs = lastcs;
ch->new_cs = zlecs;
if(suf + pre == lastll) {
ch->del = NULL;
ch->dell = 0;
} else {
ch->dell = lastll - pre - suf;
ch->del = (ZLE_STRING_T)zalloc(ch->dell * ZLE_CHAR_SIZE);
ZS_memcpy(ch->del, lastline + pre, ch->dell);
}
if(suf + pre == zlell) {
ch->ins = NULL;
ch->insl = 0;
} else {
ch->insl = zlell - pre - suf;
ch->ins = (ZLE_STRING_T)zalloc(ch->insl * ZLE_CHAR_SIZE);
ZS_memcpy(ch->ins, zleline + pre, ch->insl);
}
if(nextchanges) {
ch->flags = CH_PREV;
ch->prev = endnextchanges;
endnextchanges->flags |= CH_NEXT;
endnextchanges->next = ch;
} else {
nextchanges = ch;
ch->flags = 0;
ch->prev = NULL;
}
ch->changeno = ++undo_changeno;
endnextchanges = ch;
}
static void
transpose_swap(int start, int middle, int end)
{
int len1, len2;
ZLE_STRING_T first;
len1 = middle - start;
len2 = end - middle;
first = (ZLE_STRING_T)zalloc(len1 * ZLE_CHAR_SIZE);
ZS_memcpy(first, zleline + start, len1);
/* Move may be overlapping... */
ZS_memmove(zleline + start, zleline + middle, len2);
ZS_memcpy(zleline + start + len2, first, len1);
zfree(first, len1 * ZLE_CHAR_SIZE);
}
int
copyprevshellword(UNUSED(char **args))
{
LinkList l;
LinkNode n;
int i;
char *p = NULL;
if (zmult <= 0)
return 1;
if ((l = bufferwords(NULL, NULL, &i, LEXFLAGS_ZLE))) {
i -= (zmult-1);
if (i < 0)
return 1;
for (n = firstnode(l); n; incnode(n))
if (!i--) {
p = getdata(n);
break;
}
}
if (p) {
int len;
ZLE_STRING_T lineadd = stringaszleline(p, 0, &len, NULL, NULL);
spaceinline(len);
ZS_memcpy(zleline + zlecs, lineadd, len);
zlecs += len;
free(lineadd);
}
return 0;
}
/* position: 0 is before, 1 after, 2 split the line */
static void pastebuf(Cutbuffer buf, int mult, int position)
{
int cc;
if (buf->flags & CUTBUFFER_LINE) {
if (position == 2) {
if (!zlecs)
position = 0;
else if (zlecs == zlell)
position = 1;
}
if (position == 2) {
yankb = zlecs;
spaceinline(buf->len + 2);
zleline[zlecs++] = ZWC('\n');
ZS_memcpy(zleline + zlecs, buf->buf, buf->len);
zlecs += buf->len;
zleline[zlecs] = ZWC('\n');
yanke = zlecs + 1;
} else if (position != 0) {
yankb = zlecs = findeol();
spaceinline(buf->len + 1);
zleline[zlecs++] = ZWC('\n');
yanke = zlecs + buf->len;
ZS_memcpy(zleline + zlecs, buf->buf, buf->len);
} else {
yankb = zlecs = findbol();
spaceinline(buf->len + 1);
ZS_memcpy(zleline + zlecs, buf->buf, buf->len);
yanke = zlecs + buf->len + 1;
zleline[zlecs + buf->len] = ZWC('\n');
}
vifirstnonblank(zlenoargs);
} else {
if (position == 1 && zlecs != findeol())
INCCS();
yankb = zlecs;
cc = buf->len;
while (mult--) {
spaceinline(cc);
ZS_memcpy(zleline + zlecs, buf->buf, cc);
zlecs += cc;
}
yanke = zlecs;
if (zlecs && invicmdmode())
DECCS();
}
}
int
yankpop(UNUSED(char **args))
{
int cc, kctstart = kct;
Cutbuffer buf;
if (!(lastcmd & ZLE_YANK) || !kring || !kctbuf) {
kctbuf = NULL;
return 1;
}
do {
/*
* This is supposed to make the yankpop loop
* original buffer -> kill ring in order -> original buffer -> ...
* where the original buffer is -1 and the remainder are
* indices into the kill ring, remember that we need to start
* that at kringnum rather than zero.
*/
if (kct == -1)
kct = kringnum;
else {
int kctnew = (kct + kringsize - 1) % kringsize;
if (kctnew == kringnum)
kct = -1;
else
kct = kctnew;
}
if (kct == -1)
buf = kctbuf; /* Use original cutbuffer */
else
buf = kring+kct; /* Use somewhere in the kill ring */
/* Careful to prevent infinite looping */
if (kct == kctstart)
return 1;
/*
* Skip unset buffers instead of stopping as we used to do.
* Also skip zero-length buffers.
* There are two reasons for this:
* 1. We now map the array $killring directly into the
* killring, instead of via some extra size-checking logic.
* When $killring has been set, a buffer will always have
* at least a zero-length string in it.
* 2. The old logic was inconsistent; when the kill ring
* was full, we could loop round and round it, otherwise
* we just stopped when we hit the first empty buffer.
*/
} while (!buf->buf || *buf->buf == ZWC('\0'));
zlecs = yankb;
foredel(yanke - yankb, CUT_RAW);
cc = buf->len;
spaceinline(cc);
ZS_memcpy(zleline + zlecs, buf->buf, cc);
zlecs += cc;
yanke = zlecs;
return 0;
}
void
setlastline(void)
{
UNMETACHECK();
if(lastlinesz != linesz)
lastline = realloc(lastline, (lastlinesz = linesz) * ZLE_CHAR_SIZE);
ZS_memcpy(lastline, zleline, (lastll = zlell));
lastcs = zlecs;
}
int
quoteline(UNUSED(char **args))
{
ZLE_STRING_T str;
size_t len = zlell;
str = makequote(zleline, &len);
sizeline(len);
ZS_memcpy(zleline, str, len);
zlecs = zlell = len;
return 0;
}
void
initundo(void)
{
nextchanges = NULL;
changes = curchange = zalloc(sizeof(*curchange));
curchange->prev = curchange->next = NULL;
curchange->del = curchange->ins = NULL;
curchange->dell = curchange->insl = 0;
lastline = zalloc((lastlinesz = linesz) * ZLE_CHAR_SIZE);
ZS_memcpy(lastline, zleline, (lastll = zlell));
lastcs = zlecs;
}
int
quoteregion(UNUSED(char **args))
{
ZLE_STRING_T str;
size_t len;
if (mark > zlell)
mark = zlell;
if (mark < zlecs) {
int tmp = mark;
mark = zlecs;
zlecs = tmp;
}
str = (ZLE_STRING_T)hcalloc((len = mark - zlecs) * ZLE_CHAR_SIZE);
ZS_memcpy(str, zleline + zlecs, len);
foredel(len, CUT_RAW);
str = makequote(str, &len);
spaceinline(len);
ZS_memcpy(zleline + zlecs, str, len);
mark = zlecs;
zlecs += len;
return 0;
}
mod_export void
addsuffix(int tp, int flags, ZLE_STRING_T chars, int lenstr, int lensuf)
{
struct suffixset *newsuf = zalloc(sizeof(struct suffixset));
newsuf->next = suffixlist;
suffixlist = newsuf;
newsuf->tp = tp;
newsuf->flags = flags;
if (lenstr) {
newsuf->chars = zalloc(lenstr*sizeof(ZLE_CHAR_T));
ZS_memcpy(newsuf->chars, chars, lenstr);
} else
newsuf->chars = NULL;
newsuf->lenstr = lenstr;
newsuf->lensuf = lensuf;
}
static void
set_rbuffer(UNUSED(Param pm), char *x)
{
ZLE_STRING_T y;
int len;
if (x && *x != ZWC('\0'))
y = stringaszleline(x, 0, &len, NULL, NULL);
else
y = ZWS(""), len = 0;
sizeline(zlell = zlecs + len);
ZS_memcpy(zleline + zlecs, y, len);
zsfree(x);
if (len)
free(y);
fixsuffix();
menucmp = 0;
}
static int
applychange(struct change *ch)
{
if(ch->hist != histline) {
zle_setline(quietgethist(ch->hist));
zlecs = ch->old_cs;
return 0;
}
zlecs = ch->off;
if(ch->del)
foredel(ch->dell, CUT_RAW);
if(ch->ins) {
spaceinline(ch->insl);
ZS_memcpy(zleline + zlecs, ch->ins, ch->insl);
zlecs += ch->insl;
}
zlecs = ch->new_cs;
return 1;
}
int
copyprevword(UNUSED(char **args))
{
int len, t0 = zlecs, t1;
if (zmult > 0) {
int count = zmult;
for (;;) {
t1 = t0;
while (t0) {
int prev = t0;
DECPOS(prev);
if (ZC_iword(zleline[prev]))
break;
t0 = prev;
}
while (t0) {
int prev = t0;
DECPOS(prev);
if (!ZC_iword(zleline[prev]))
break;
t0 = prev;
}
if (!--count)
break;
if (t0 == 0)
return 1;
}
}
else
return 1;
len = t1 - t0;
spaceinline(len);
ZS_memcpy(zleline + zlecs, zleline + t0, len);
zlecs += len;
return 0;
}
int
yank(UNUSED(char **args))
{
int n = zmult;
if (n < 0)
return 1;
if (zmod.flags & MOD_VIBUF)
kctbuf = &vibuf[zmod.vibuf];
else
kctbuf = &cutbuf;
if (!kctbuf->buf)
return 1;
yankb = yankcs = mark = zlecs;
while (n--) {
kct = -1;
spaceinline(kctbuf->len);
ZS_memcpy(zleline + zlecs, kctbuf->buf, kctbuf->len);
zlecs += kctbuf->len;
yanke = zlecs;
}
return 0;
}
static int
getvirange(int wf)
{
int pos = zlecs, mpos = mark, ret = 0;
int visual = region_active; /* movement command might set it */
int mult1 = zmult, hist1 = histline;
Thingy k2;
if (visual) {
if (!zlell)
return -1;
pos = mark;
vilinerange = (visual == 2);
region_active = 0;
} else {
virangeflag = 1;
wordflag = wf;
mark = -1;
/* use operator-pending keymap if one exists */
Keymap km = openkeymap("viopp");
if (km)
selectlocalmap(km);
/* Now we need to execute the movement command, to see where it *
* actually goes. virangeflag here indicates to the movement *
* function that it should place the cursor at the end of the *
* range, rather than where the cursor would actually go if it *
* were executed normally. This makes a difference to some *
* commands, but not all. For example, if searching forward *
* for a character, under normal circumstances the cursor lands *
* on the character. For a range, the range must include the *
* character, so the cursor gets placed after the character if *
* virangeflag is set. */
zmod.flags &= ~MOD_TMULT;
do {
vilinerange = 0;
prefixflag = 0;
if (!(k2 = getkeycmd()) || (k2->flags & DISABLED) ||
k2 == Th(z_sendbreak)) {
wordflag = 0;
virangeflag = 0;
mark = mpos;
return -1;
}
/*
* With k2 == bindk, the command key is repeated:
* a number of lines is used. If the function used
* returns 1, we fail.
*/
if ((k2 == bindk) ? dovilinerange() : execzlefunc(k2, zlenoargs, 1))
ret = -1;
if(vichgrepeat)
zmult = mult1;
else
zmult = mult1 * zmod.tmult;
} while(prefixflag && !ret);
wordflag = 0;
selectlocalmap(NULL);
/* It is an error to use a non-movement command to delimit the *
* range. We here reject the case where the command modified *
* the line, or selected a different history line. */
if (histline != hist1 || zlell != lastll || memcmp(zleline, lastline, zlell)) {
histline = hist1;
ZS_memcpy(zleline, lastline, zlell = lastll);
zlecs = pos;
mark = mpos;
virangeflag = 0;
return -1;
}
/* Can't handle an empty file. Also, if the movement command *
* failed, or didn't move, it is an error. */
if (!zlell || (zlecs == pos && (mark == -1 || mark == zlecs) &&
virangeflag != 2) || ret == -1) {
mark = mpos;
virangeflag = 0;
return -1;
}
virangeflag = 0;
/* if the mark has moved, ignore the original cursor position *
* and use the mark. */
if (mark != -1)
pos = mark;
}
mark = mpos;
/* Get the range the right way round. zlecs is placed at the *
* start of the range, and pos (the return value of this *
* function) is the end. */
if (zlecs > pos) {
int tmp = zlecs;
zlecs = pos;
pos = tmp;
}
/* visual selection mode needs to include additional position */
if (visual == 1 && pos < zlell && invicmdmode())
INCPOS(pos);
/* Was it a line-oriented move? If so, the command will have set *
* the vilinerange flag. In this case, entire lines are taken, *
* rather than just the sequence of characters delimited by pos *
* and zlecs. The terminating newline is left out of the range, *
* which the real command must deal with appropriately. At this *
* point we just need to make the range encompass entire lines. */
vilinerange = (zmod.flags & MOD_LINE) ||
(vilinerange && !(zmod.flags & MOD_CHAR));
if (vilinerange) {
int newcs = findbol();
lastcol = zlecs - newcs;
zlecs = pos;
pos = findeol();
zlecs = newcs;
} else if (!visual) {
/* for a character-wise move don't include a newline at the *
* end of the range */
int prev = pos;
DECPOS(prev);
if (zleline[prev] == ZWC('\n'))
pos = prev;
}
return pos;
}
int
transposewords(UNUSED(char **args))
{
int p1, p2, p3, p4, pt, len, x = zlecs, pos;
ZLE_STRING_T temp, pp;
int n = zmult;
int neg = n < 0, ocs = zlecs;
if (neg)
n = -n;
while (x != zlell && zleline[x] != ZWC('\n') && !ZC_iword(zleline[x]))
INCPOS(x);
if (x == zlell || zleline[x] == ZWC('\n')) {
x = zlecs;
while (x) {
if (ZC_iword(zleline[x]))
break;
pos = x;
DECPOS(pos);
if (zleline[pos] == ZWC('\n'))
break;
x = pos;
}
if (!x)
return 1;
pos = x;
DECPOS(pos);
if (zleline[pos] == ZWC('\n'))
return 1;
}
for (p4 = x; p4 != zlell && ZC_iword(zleline[p4]); INCPOS(p4))
;
for (p3 = p4; p3; ) {
pos = p3;
DECPOS(pos);
if (!ZC_iword(zleline[pos]))
break;
p3 = pos;
}
if (!p3)
return 1;
p1 = p2 = pt = p3;
while (n--) {
for (p2 = pt; p2; ) {
pos = p2;
DECPOS(pos);
if (ZC_iword(zleline[pos]))
break;
p2 = pos;
}
if (!p2)
return 1;
for (p1 = p2; p1; ) {
pos = p1;
DECPOS(pos);
if (!ZC_iword(zleline[pos]))
break;
p1 = pos;
}
pt = p1;
}
pp = temp = (ZLE_STRING_T)zhalloc((p4 - p1)*ZLE_CHAR_SIZE);
len = p4 - p3;
ZS_memcpy(pp, zleline + p3, len);
pp += len;
len = p3 - p2;
ZS_memcpy(pp, zleline + p2, len);
pp += len;
ZS_memcpy(pp, zleline + p1, p2 - p1);
ZS_memcpy(zleline + p1, temp, p4 - p1);
if (neg)
zlecs = ocs;
else
zlecs = p4;
return 0;
}
static int
getvirange(int wf)
{
int pos = zlecs, ret = 0;
int mult1 = zmult, hist1 = histline;
Thingy k2;
virangeflag = 1;
wordflag = wf;
/* Now we need to execute the movement command, to see where it *
* actually goes. virangeflag here indicates to the movement *
* function that it should place the cursor at the end of the *
* range, rather than where the cursor would actually go if it *
* were executed normally. This makes a difference to some *
* commands, but not all. For example, if searching forward *
* for a character, under normal circumstances the cursor lands *
* on the character. For a range, the range must include the *
* character, so the cursor gets placed after the character if *
* virangeflag is set. vi-match-bracket needs to change the *
* value of virangeflag under some circumstances, meaning that *
* we need to change the *starting* position. */
zmod.flags &= ~MOD_TMULT;
do {
vilinerange = 0;
prefixflag = 0;
if (!(k2 = getkeycmd()) || (k2->flags & DISABLED) ||
k2 == Th(z_sendbreak)) {
wordflag = 0;
virangeflag = 0;
return -1;
}
/*
* With k2 == bindk, the command key is repeated:
* a number of lines is used. If the function used
* returns 1, we fail.
*/
if ((k2 == bindk) ? dovilinerange() : execzlefunc(k2, zlenoargs, 1))
ret = -1;
if(vichgrepeat)
zmult = mult1;
else
zmult = mult1 * zmod.tmult;
} while(prefixflag && !ret);
wordflag = 0;
virangeflag = 0;
/* It is an error to use a non-movement command to delimit the *
* range. We here reject the case where the command modified *
* the line, or selected a different history line. */
if (histline != hist1 || zlell != lastll || memcmp(zleline, lastline, zlell)) {
histline = hist1;
ZS_memcpy(zleline, lastline, zlell = lastll);
zlecs = pos;
return -1;
}
/* Can't handle an empty file. Also, if the movement command *
* failed, or didn't move, it is an error. */
if (!zlell || (zlecs == pos && virangeflag != 2) || ret == -1)
return -1;
/* vi-match-bracket changes the value of virangeflag when *
* moving to the opening bracket, meaning that we need to *
* change the *starting* position. */
if(virangeflag == -1)
{
int origcs = zlecs;
zlecs = pos;
INCCS();
pos = zlecs;
zlecs = origcs;
}
/* Get the range the right way round. zlecs is placed at the *
* start of the range, and pos (the return value of this *
* function) is the end. */
if (zlecs > pos) {
int tmp = zlecs;
zlecs = pos;
pos = tmp;
}
/* Was it a line-oriented move? If so, the command will have set *
* the vilinerange flag. In this case, entire lines are taken, *
* rather than just the sequence of characters delimited by pos *
* and zlecs. The terminating newline is left out of the range, *
* which the real command must deal with appropriately. At this *
* point we just need to make the range encompass entire lines. */
if(vilinerange) {
int newcs = findbol();
zlecs = pos;
pos = findeol();
zlecs = newcs;
}
return pos;
}
void
cuttext(ZLE_STRING_T line, int ct, int flags)
{
if (!ct)
return;
UNMETACHECK();
if (zmod.flags & MOD_VIBUF) {
struct cutbuffer *b = &vibuf[zmod.vibuf];
if (!(zmod.flags & MOD_VIAPP) || !b->buf) {
free(b->buf);
b->buf = (ZLE_STRING_T)zalloc(ct * ZLE_CHAR_SIZE);
ZS_memcpy(b->buf, line, ct);
b->len = ct;
b->flags = vilinerange ? CUTBUFFER_LINE : 0;
} else {
int len = b->len;
if(vilinerange)
b->flags |= CUTBUFFER_LINE;
b->buf = (ZLE_STRING_T)
realloc((char *)b->buf,
(ct + len + !!(b->flags & CUTBUFFER_LINE))
* ZLE_CHAR_SIZE);
if (b->flags & CUTBUFFER_LINE)
b->buf[len++] = ZWC('\n');
ZS_memcpy(b->buf + len, line, ct);
b->len = len + ct;
}
return;
} else {
/* Save in "1, shifting "1-"8 along to "2-"9 */
int n;
free(vibuf[34].buf);
for(n=34; n>26; n--)
vibuf[n] = vibuf[n-1];
vibuf[26].buf = (ZLE_STRING_T)zalloc(ct * ZLE_CHAR_SIZE);
ZS_memcpy(vibuf[26].buf, line, ct);
vibuf[26].len = ct;
vibuf[26].flags = vilinerange ? CUTBUFFER_LINE : 0;
}
if (!cutbuf.buf) {
cutbuf.buf = (ZLE_STRING_T)zalloc(ZLE_CHAR_SIZE);
cutbuf.buf[0] = ZWC('\0');
cutbuf.len = cutbuf.flags = 0;
} else if (!(lastcmd & ZLE_KILL) || (flags & CUT_REPLACE)) {
Cutbuffer kptr;
if (!kring) {
kringsize = KRINGCTDEF;
kring = (Cutbuffer)zshcalloc(kringsize * sizeof(struct cutbuffer));
} else
kringnum = (kringnum + 1) % kringsize;
kptr = kring + kringnum;
if (kptr->buf)
free(kptr->buf);
*kptr = cutbuf;
cutbuf.buf = (ZLE_STRING_T)zalloc(ZLE_CHAR_SIZE);
cutbuf.buf[0] = ZWC('\0');
cutbuf.len = cutbuf.flags = 0;
}
if (flags & (CUT_FRONT|CUT_REPLACE)) {
ZLE_STRING_T s = (ZLE_STRING_T)zalloc((cutbuf.len + ct)*ZLE_CHAR_SIZE);
ZS_memcpy(s, line, ct);
ZS_memcpy(s + ct, cutbuf.buf, cutbuf.len);
free(cutbuf.buf);
cutbuf.buf = s;
cutbuf.len += ct;
} else {
cutbuf.buf = realloc((char *)cutbuf.buf,
(cutbuf.len + ct) * ZLE_CHAR_SIZE);
ZS_memcpy(cutbuf.buf + cutbuf.len, line, ct);
cutbuf.len += ct;
}
if(vilinerange)
cutbuf.flags |= CUTBUFFER_LINE;
else
cutbuf.flags &= ~CUTBUFFER_LINE;
}
