Esempi in C++ (Cpp) per __I2C1_CLK_DISABLE

Esempio n. 1

File: i2c.c Progetto: craig-unilectric/pdp

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{

    if(hi2c->Instance==I2C1)
    {
        /* USER CODE BEGIN I2C1_MspDeInit 0 */

        /* USER CODE END I2C1_MspDeInit 0 */
        /* Peripheral clock disable */
        __I2C1_CLK_DISABLE();

        /**I2C1 GPIO Configuration
        PB7     ------> I2C1_SDA
        PB8     ------> I2C1_SCL
        */
        HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7|GPIO_PIN_8);

        /* Peripheral interrupt Deinit*/
        HAL_NVIC_DisableIRQ(I2C1_EV_IRQn);

        HAL_NVIC_DisableIRQ(I2C1_ER_IRQn);

    }
    /* USER CODE BEGIN I2C1_MspDeInit 1 */

    /* USER CODE END I2C1_MspDeInit 1 */
}

Esempio n. 2

File: stm32f1xx_hal_msp.c Progetto: roccopietroni/CAN_IO

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{

  if(hi2c->Instance==I2C1)
  {
  /* USER CODE BEGIN I2C1_MspDeInit 0 */

  /* USER CODE END I2C1_MspDeInit 0 */
    /* Peripheral clock disable */
    __I2C1_CLK_DISABLE();
  
    /**I2C1 GPIO Configuration    
    PB6     ------> I2C1_SCL
    PB7     ------> I2C1_SDA 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);

    /* Peripheral DMA DeInit*/
    HAL_DMA_DeInit(hi2c->hdmarx);
    HAL_DMA_DeInit(hi2c->hdmatx);
  /* USER CODE BEGIN I2C1_MspDeInit 1 */

  /* USER CODE END I2C1_MspDeInit 1 */
  }

}

Esempio n. 3

File: stm32f1xx_hal_msp.c Progetto: phonophob/ST32F1xx-HAL-AS3935

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{

  if(hi2c->Instance==I2C1)
  {
  /* USER CODE BEGIN I2C1_MspDeInit 0 */

  /* USER CODE END I2C1_MspDeInit 0 */
    /* Peripheral clock disable */
    __I2C1_CLK_DISABLE();
  
    /**I2C1 GPIO Configuration    
    PB6     ------> I2C1_SCL
    PB7     ------> I2C1_SDA 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);

    /* Peripheral interrupt DeInit*/
    HAL_NVIC_DisableIRQ(I2C1_ER_IRQn);

  /* USER CODE BEGIN I2C1_MspDeInit 1 */

  /* USER CODE END I2C1_MspDeInit 1 */
  }
  else if(hi2c->Instance==I2C2)
  {
  /* USER CODE BEGIN I2C2_MspDeInit 0 */

  /* USER CODE END I2C2_MspDeInit 0 */
    /* Peripheral clock disable */
    __I2C2_CLK_DISABLE();
  
    /**I2C2 GPIO Configuration    
    PB10     ------> I2C2_SCL
    PB11     ------> I2C2_SDA 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);

    /* Peripheral interrupt DeInit*/
    HAL_NVIC_DisableIRQ(I2C2_EV_IRQn);

    HAL_NVIC_DisableIRQ(I2C2_ER_IRQn);

  /* USER CODE BEGIN I2C2_MspDeInit 1 */

  /* USER CODE END I2C2_MspDeInit 1 */
  }

}

Esempio n. 4

File: i2c.c Progetto: AruGit/micropython

void i2c_deinit(I2C_HandleTypeDef *i2c) {
    HAL_I2C_DeInit(i2c);
    if (0) {
#if MICROPY_HW_ENABLE_I2C1
    } else if (i2c->Instance == I2C1) {
        __I2C1_FORCE_RESET();
        __I2C1_RELEASE_RESET();
        __I2C1_CLK_DISABLE();
#endif
    } else if (i2c->Instance == I2C2) {
        __I2C2_FORCE_RESET();
        __I2C2_RELEASE_RESET();
        __I2C2_CLK_DISABLE();
    }
}

Esempio n. 5

File: i2c.c Progetto: korrav/power_distr_f4

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{

  if(hi2c->Instance==I2C1)
  {
  /* USER CODE BEGIN I2C1_MspDeInit 0 */

  /* USER CODE END I2C1_MspDeInit 0 */
    /* Peripheral clock disable */
    __I2C1_CLK_DISABLE();
  
    /**I2C1 GPIO Configuration    
    PB8     ------> I2C1_SCL
    PB9     ------> I2C1_SDA 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);

    /* Peripheral DMA DeInit*/
    HAL_DMA_DeInit(hi2c->hdmarx);
    HAL_DMA_DeInit(hi2c->hdmatx);
  /* USER CODE BEGIN I2C1_MspDeInit 1 */

  /* USER CODE END I2C1_MspDeInit 1 */
  }
  else if(hi2c->Instance==I2C3)
  {
  /* USER CODE BEGIN I2C3_MspDeInit 0 */

  /* USER CODE END I2C3_MspDeInit 0 */
    /* Peripheral clock disable */
    __I2C3_CLK_DISABLE();
  
    /**I2C3 GPIO Configuration    
    PC9     ------> I2C3_SDA
    PA8     ------> I2C3_SCL 
    */
    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_9);

    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8);

    /* Peripheral DMA DeInit*/
    HAL_DMA_DeInit(hi2c->hdmatx);
    HAL_DMA_DeInit(hi2c->hdmarx);
  /* USER CODE BEGIN I2C3_MspDeInit 1 */

  /* USER CODE END I2C3_MspDeInit 1 */
  }
} 

Esempio n. 6

File: stm32f0xx_hal_msp.c Progetto: adricl/ESPlant

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{

  if(hi2c->Instance==I2C1)
  {
    /* Peripheral clock disable */
    __I2C1_CLK_DISABLE();

    /**I2C1 GPIO Configuration
    PF0-OSC_IN     ------> I2C1_SDA
    PF1-OSC_OUT     ------> I2C1_SCL
    */
    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1);

  }
}

Esempio n. 7

File: stm32f4xx_hal_msp.c Progetto: glocklueng/sash-a300-lab

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{

  if(hi2c->Instance==I2C1)
  {
    /* Peripheral clock disable */
    __I2C1_CLK_DISABLE();
  
    /**I2C1 GPIO Configuration    
    PB6     ------> I2C1_SCL
    PB7     ------> I2C1_SDA 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);

  }

}

Esempio n. 8

File: stm32f4xx_hal_msp.c Progetto: cgroupsupport/grrv

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{
  if(hi2c->Instance==I2C1)
  {
    /* Peripheral clock disable */
    __I2C1_CLK_DISABLE();
  
    /**I2C1 GPIO Configuration    
    PB8     ------> I2C1_SCL
    PB9     ------> I2C1_SDA 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);

    /* Peripheral interrupt DeInit*/
    HAL_NVIC_DisableIRQ(I2C1_EV_IRQn);
    HAL_NVIC_DisableIRQ(I2C1_ER_IRQn);
		
  }
}

Esempio n. 9

File: stm32f4xx_hal_msp.c Progetto: Rescube/purethermal1-firmware

void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{

  if(hi2c->Instance==I2C1)
  {
  /* USER CODE BEGIN I2C1_MspDeInit 0 */

  /* USER CODE END I2C1_MspDeInit 0 */
    /* Peripheral clock disable */
    __I2C1_CLK_DISABLE();
  
    /**I2C1 GPIO Configuration    
    PB8     ------> I2C1_SCL
    PB9     ------> I2C1_SDA 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);

  }
  /* USER CODE BEGIN I2C1_MspDeInit 1 */

  /* USER CODE END I2C1_MspDeInit 1 */

}

Esempio n. 10

File: i2c.c Progetto: ShrimpingIt/micropython

void i2c_deinit(I2C_HandleTypeDef *i2c) {
    HAL_I2C_DeInit(i2c);
    if (0) {
    #if defined(MICROPY_HW_I2C1_SCL)
    } else if (i2c->Instance == I2C1) {
        __I2C1_FORCE_RESET();
        __I2C1_RELEASE_RESET();
        __I2C1_CLK_DISABLE();
        HAL_NVIC_DisableIRQ(I2C1_EV_IRQn);
        HAL_NVIC_DisableIRQ(I2C1_ER_IRQn);
    #endif
    #if defined(MICROPY_HW_I2C2_SCL)
    } else if (i2c->Instance == I2C2) {
        __I2C2_FORCE_RESET();
        __I2C2_RELEASE_RESET();
        __I2C2_CLK_DISABLE();
        HAL_NVIC_DisableIRQ(I2C2_EV_IRQn);
        HAL_NVIC_DisableIRQ(I2C2_ER_IRQn);
    #endif
    #if defined(MICROPY_HW_I2C3_SCL)
    } else if (i2c->Instance == I2C3) {
        __I2C3_FORCE_RESET();
        __I2C3_RELEASE_RESET();
        __I2C3_CLK_DISABLE();
        HAL_NVIC_DisableIRQ(I2C3_EV_IRQn);
        HAL_NVIC_DisableIRQ(I2C3_ER_IRQn);
    #endif
    #if defined(MICROPY_HW_I2C4_SCL)
    } else if (i2c->Instance == I2C4) {
        __HAL_RCC_I2C4_FORCE_RESET();
        __HAL_RCC_I2C4_RELEASE_RESET();
        __HAL_RCC_I2C4_CLK_DISABLE();
        HAL_NVIC_DisableIRQ(I2C4_EV_IRQn);
        HAL_NVIC_DisableIRQ(I2C4_ER_IRQn);
    #endif
    }
}

Esempio n. 11

File: fm_i2c.c Progetto: JFDuval/FlexSEA

// Implement I2C MSP DeInit
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
{
	__I2C1_CLK_DISABLE();
	//uhh should be careful about this since SPI is on the same bus!
	//__GPIOB_CLK_DISABLE();
}