static int pthread_handle_create(pthread_t *thread, const pthread_attr_t *attr,
void * (*start_routine)(void *), void *arg,
sigset_t * mask, int father_pid,
int report_events,
td_thr_events_t *event_maskp)
{
size_t sseg;
int pid;
pthread_descr new_thread;
char * new_thread_bottom;
char * new_thread_top;
pthread_t new_thread_id;
char *guardaddr = NULL;
size_t guardsize = 0;
int pagesize = getpagesize();
int saved_errno = 0;
/* First check whether we have to change the policy and if yes, whether
we can do this. Normally this should be done by examining the
return value of the sched_setscheduler call in pthread_start_thread
but this is hard to implement. FIXME */
if (attr != NULL && attr->__schedpolicy != SCHED_OTHER && geteuid () != 0)
return EPERM;
/* Find a free segment for the thread, and allocate a stack if needed */
for (sseg = 2; ; sseg++)
{
if (sseg >= PTHREAD_THREADS_MAX)
return EAGAIN;
if (__pthread_handles[sseg].h_descr != NULL)
continue;
if (pthread_allocate_stack(attr, thread_segment(sseg), pagesize,
&new_thread, &new_thread_bottom,
&guardaddr, &guardsize) == 0)
break;
#ifndef __ARCH_USE_MMU__
else
/* When there is MMU, mmap () is used to allocate the stack. If one
* segment is already mapped, we should continue to see if we can
* use the next one. However, when there is no MMU, malloc () is used.
* It's waste of CPU cycles to continue to try if it fails. */
return EAGAIN;
#endif
}
__pthread_handles_num++;
/* Allocate new thread identifier */
pthread_threads_counter += PTHREAD_THREADS_MAX;
new_thread_id = sseg + pthread_threads_counter;
/* Initialize the thread descriptor. Elements which have to be
initialized to zero already have this value. */
new_thread->p_tid = new_thread_id;
new_thread->p_lock = &(__pthread_handles[sseg].h_lock);
new_thread->p_cancelstate = PTHREAD_CANCEL_ENABLE;
new_thread->p_canceltype = PTHREAD_CANCEL_DEFERRED;
new_thread->p_errnop = &new_thread->p_errno;
new_thread->p_h_errnop = &new_thread->p_h_errno;
#ifdef __UCLIBC_HAS_XLOCALE__
/* Initialize thread's locale to the global locale. */
new_thread->locale = __global_locale;
#endif /* __UCLIBC_HAS_XLOCALE__ */
new_thread->p_guardaddr = guardaddr;
new_thread->p_guardsize = guardsize;
new_thread->p_self = new_thread;
new_thread->p_nr = sseg;
/* Initialize the thread handle */
__pthread_init_lock(&__pthread_handles[sseg].h_lock);
__pthread_handles[sseg].h_descr = new_thread;
__pthread_handles[sseg].h_bottom = new_thread_bottom;
/* Determine scheduling parameters for the thread */
new_thread->p_start_args.schedpolicy = -1;
if (attr != NULL) {
new_thread->p_detached = attr->__detachstate;
new_thread->p_userstack = attr->__stackaddr_set;
switch(attr->__inheritsched) {
case PTHREAD_EXPLICIT_SCHED:
new_thread->p_start_args.schedpolicy = attr->__schedpolicy;
memcpy (&new_thread->p_start_args.schedparam, &attr->__schedparam,
sizeof (struct sched_param));
break;
case PTHREAD_INHERIT_SCHED:
new_thread->p_start_args.schedpolicy = sched_getscheduler(father_pid);
sched_getparam(father_pid, &new_thread->p_start_args.schedparam);
break;
}
new_thread->p_priority =
new_thread->p_start_args.schedparam.sched_priority;
}
/* Finish setting up arguments to pthread_start_thread */
new_thread->p_start_args.start_routine = start_routine;
new_thread->p_start_args.arg = arg;
new_thread->p_start_args.mask = *mask;
/* Raise priority of thread manager if needed */
__pthread_manager_adjust_prio(new_thread->p_priority);
/* Do the cloning. We have to use two different functions depending
on whether we are debugging or not. */
pid = 0; /* Note that the thread never can have PID zero. */
new_thread_top = ((char *)new_thread - THREAD_STACK_OFFSET);
/* ******************************************************** */
/* This code was moved from below to cope with running threads
* on uClinux systems. See comment below...
* Insert new thread in doubly linked list of active threads */
new_thread->p_prevlive = __pthread_main_thread;
new_thread->p_nextlive = __pthread_main_thread->p_nextlive;
__pthread_main_thread->p_nextlive->p_prevlive = new_thread;
__pthread_main_thread->p_nextlive = new_thread;
/* ********************************************************* */
if (report_events)
{
/* See whether the TD_CREATE event bit is set in any of the
masks. */
int idx = __td_eventword (TD_CREATE);
uint32_t m = __td_eventmask (TD_CREATE);
if ((m & (__pthread_threads_events.event_bits[idx]
| event_maskp->event_bits[idx])) != 0)
{
/* Lock the mutex the child will use now so that it will stop. */
__pthread_lock(new_thread->p_lock, NULL);
/* We have to report this event. */
#ifdef __ia64__
pid = __clone2(pthread_start_thread_event, new_thread_top,
new_thread_top - new_thread_bottom,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
__pthread_sig_cancel, new_thread);
#else
pid = clone(pthread_start_thread_event, new_thread_top,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
__pthread_sig_cancel, new_thread);
#endif
saved_errno = errno;
if (pid != -1)
{
/* Now fill in the information about the new thread in
the newly created thread's data structure. We cannot let
the new thread do this since we don't know whether it was
already scheduled when we send the event. */
new_thread->p_eventbuf.eventdata = new_thread;
new_thread->p_eventbuf.eventnum = TD_CREATE;
__pthread_last_event = new_thread;
/* We have to set the PID here since the callback function
in the debug library will need it and we cannot guarantee
the child got scheduled before the debugger. */
new_thread->p_pid = pid;
/* Now call the function which signals the event. */
__linuxthreads_create_event ();
/* Now restart the thread. */
__pthread_unlock(new_thread->p_lock);
}
}
}
if (pid == 0)
{
PDEBUG("cloning new_thread = %p\n", new_thread);
#ifdef __ia64__
pid = __clone2(pthread_start_thread, new_thread_top,
new_thread_top - new_thread_bottom,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
__pthread_sig_cancel, new_thread);
#else
pid = clone(pthread_start_thread, new_thread_top,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
__pthread_sig_cancel, new_thread);
#endif
saved_errno = errno;
}
/* Check if cloning succeeded */
if (pid == -1) {
/********************************************************
* Code inserted to remove the thread from our list of active
* threads in case of failure (needed to cope with uClinux),
* See comment below. */
new_thread->p_nextlive->p_prevlive = new_thread->p_prevlive;
new_thread->p_prevlive->p_nextlive = new_thread->p_nextlive;
/********************************************************/
/* Free the stack if we allocated it */
if (attr == NULL || !attr->__stackaddr_set)
{
#ifdef __ARCH_USE_MMU__
if (new_thread->p_guardsize != 0)
munmap(new_thread->p_guardaddr, new_thread->p_guardsize);
munmap((caddr_t)((char *)(new_thread+1) - INITIAL_STACK_SIZE),
INITIAL_STACK_SIZE);
#else
free(new_thread_bottom);
#endif /* __ARCH_USE_MMU__ */
}
__pthread_handles[sseg].h_descr = NULL;
__pthread_handles[sseg].h_bottom = NULL;
__pthread_handles_num--;
return saved_errno;
}
PDEBUG("new thread pid = %d\n", pid);
#if 0
/* ***********************************************************
This code has been moved before the call to clone(). In uClinux,
the use of wait on a semaphore is dependant upon that the child so
the child must be in the active threads list. This list is used in
pthread_find_self() to get the pthread_descr of self. So, if the
child calls sem_wait before this code is executed , it will hang
forever and initial_thread will instead be posted by a sem_post
call. */
/* Insert new thread in doubly linked list of active threads */
new_thread->p_prevlive = __pthread_main_thread;
new_thread->p_nextlive = __pthread_main_thread->p_nextlive;
__pthread_main_thread->p_nextlive->p_prevlive = new_thread;
__pthread_main_thread->p_nextlive = new_thread;
/************************************************************/
#endif
/* Set pid field of the new thread, in case we get there before the
child starts. */
new_thread->p_pid = pid;
/* We're all set */
*thread = new_thread_id;
return 0;
}
int __pthread_initialize_manager(void)
{
int manager_pipe[2];
int pid;
int report_events;
struct pthread_request request;
*__libc_multiple_threads_ptr = 1;
/* If basic initialization not done yet (e.g. we're called from a
constructor run before our constructor), do it now */
if (__pthread_initial_thread_bos == NULL) pthread_initialize();
/* Setup stack for thread manager */
__pthread_manager_thread_bos = malloc(THREAD_MANAGER_STACK_SIZE);
if (__pthread_manager_thread_bos == NULL) return -1;
__pthread_manager_thread_tos =
__pthread_manager_thread_bos + THREAD_MANAGER_STACK_SIZE;
/* On non-MMU systems we make sure that the initial thread bounds don't overlap
* with the manager stack frame */
NOMMU_INITIAL_THREAD_BOUNDS(__pthread_manager_thread_tos,__pthread_manager_thread_bos);
PDEBUG("manager stack: size=%d, bos=%p, tos=%p\n", THREAD_MANAGER_STACK_SIZE,
__pthread_manager_thread_bos, __pthread_manager_thread_tos);
#if 0
PDEBUG("initial stack: estimate bos=%p, tos=%p\n",
__pthread_initial_thread_bos, __pthread_initial_thread_tos);
#endif
/* Setup pipe to communicate with thread manager */
if (pipe(manager_pipe) == -1) {
free(__pthread_manager_thread_bos);
return -1;
}
/* Start the thread manager */
pid = 0;
#if defined(USE_TLS) && USE_TLS
if (__linuxthreads_initial_report_events != 0)
THREAD_SETMEM (((pthread_descr) NULL), p_report_events,
__linuxthreads_initial_report_events);
report_events = THREAD_GETMEM (((pthread_descr) NULL), p_report_events);
#else
if (__linuxthreads_initial_report_events != 0)
__pthread_initial_thread.p_report_events
= __linuxthreads_initial_report_events;
report_events = __pthread_initial_thread.p_report_events;
#endif
if (__builtin_expect (report_events, 0))
{
/* It's a bit more complicated. We have to report the creation of
the manager thread. */
int idx = __td_eventword (TD_CREATE);
uint32_t mask = __td_eventmask (TD_CREATE);
if ((mask & (__pthread_threads_events.event_bits[idx]
| __pthread_initial_thread.p_eventbuf.eventmask.event_bits[idx]))
!= 0)
{
__pthread_lock(__pthread_manager_thread.p_lock, NULL);
#ifdef __ia64__
pid = __clone2(__pthread_manager_event,
(void **) __pthread_manager_thread_tos,
THREAD_MANAGER_STACK_SIZE,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#else
pid = clone(__pthread_manager_event,
(void **) __pthread_manager_thread_tos,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#endif
if (pid != -1)
{
/* Now fill in the information about the new thread in
the newly created thread's data structure. We cannot let
the new thread do this since we don't know whether it was
already scheduled when we send the event. */
__pthread_manager_thread.p_eventbuf.eventdata =
&__pthread_manager_thread;
__pthread_manager_thread.p_eventbuf.eventnum = TD_CREATE;
__pthread_last_event = &__pthread_manager_thread;
__pthread_manager_thread.p_tid = 2* PTHREAD_THREADS_MAX + 1;
__pthread_manager_thread.p_pid = pid;
/* Now call the function which signals the event. */
__linuxthreads_create_event ();
}
/* Now restart the thread. */
__pthread_unlock(__pthread_manager_thread.p_lock);
}
}
if (pid == 0) {
#ifdef __ia64__
pid = __clone2(__pthread_manager, (void **) __pthread_manager_thread_tos,
THREAD_MANAGER_STACK_SIZE,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#else
pid = clone(__pthread_manager, (void **) __pthread_manager_thread_tos,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#endif
}
if (pid == -1) {
free(__pthread_manager_thread_bos);
close(manager_pipe[0]);
close(manager_pipe[1]);
return -1;
}
__pthread_manager_request = manager_pipe[1]; /* writing end */
__pthread_manager_reader = manager_pipe[0]; /* reading end */
__pthread_manager_thread.p_tid = 2* PTHREAD_THREADS_MAX + 1;
__pthread_manager_thread.p_pid = pid;
/* Make gdb aware of new thread manager */
if (__pthread_threads_debug && __pthread_sig_debug > 0)
{
raise(__pthread_sig_debug);
/* We suspend ourself and gdb will wake us up when it is
ready to handle us. */
__pthread_wait_for_restart_signal(thread_self());
}
/* Synchronize debugging of the thread manager */
PDEBUG("send REQ_DEBUG to manager thread\n");
request.req_kind = REQ_DEBUG;
TEMP_FAILURE_RETRY(write(__pthread_manager_request,
(char *) &request, sizeof(request)));
return 0;
}
static int pthread_handle_create(pthread_t *thread, const pthread_attr_t *attr,
void * (*start_routine)(void *), void *arg,
sigset_t * mask, int father_pid,
int report_events,
td_thr_events_t *event_maskp)
{
size_t sseg;
int pid;
pthread_descr new_thread;
char *stack_addr;
char * new_thread_bottom;
pthread_t new_thread_id;
char *guardaddr = NULL;
size_t guardsize = 0, stksize = 0;
int pagesize = __getpagesize();
int saved_errno = 0;
#ifdef USE_TLS
new_thread = _dl_allocate_tls (NULL);
if (new_thread == NULL)
return EAGAIN;
# if TLS_DTV_AT_TP
/* pthread_descr is below TP. */
new_thread = (pthread_descr) ((char *) new_thread - TLS_PRE_TCB_SIZE);
# endif
#else
/* Prevent warnings. */
new_thread = NULL;
#endif
/* First check whether we have to change the policy and if yes, whether
we can do this. Normally this should be done by examining the
return value of the __sched_setscheduler call in pthread_start_thread
but this is hard to implement. FIXME */
if (attr != NULL && attr->__schedpolicy != SCHED_OTHER && geteuid () != 0)
return EPERM;
/* Find a free segment for the thread, and allocate a stack if needed */
for (sseg = 2; ; sseg++)
{
if (sseg >= PTHREAD_THREADS_MAX)
{
#ifdef USE_TLS
# if TLS_DTV_AT_TP
new_thread = (pthread_descr) ((char *) new_thread + TLS_PRE_TCB_SIZE);
# endif
_dl_deallocate_tls (new_thread, true);
#endif
return EAGAIN;
}
if (__pthread_handles[sseg].h_descr != NULL)
continue;
if (pthread_allocate_stack(attr, thread_segment(sseg),
pagesize, &stack_addr, &new_thread_bottom,
&guardaddr, &guardsize, &stksize) == 0)
{
#ifdef USE_TLS
new_thread->p_stackaddr = stack_addr;
#else
new_thread = (pthread_descr) stack_addr;
#endif
break;
#ifndef __ARCH_USE_MMU__
} else {
/* When there is MMU, mmap () is used to allocate the stack. If one
* segment is already mapped, we should continue to see if we can
* use the next one. However, when there is no MMU, malloc () is used.
* It's waste of CPU cycles to continue to try if it fails. */
return EAGAIN;
#endif
}
}
__pthread_handles_num++;
/* Allocate new thread identifier */
pthread_threads_counter += PTHREAD_THREADS_MAX;
new_thread_id = sseg + pthread_threads_counter;
/* Initialize the thread descriptor. Elements which have to be
initialized to zero already have this value. */
#if !defined USE_TLS || !TLS_DTV_AT_TP
new_thread->p_header.data.tcb = new_thread;
new_thread->p_header.data.self = new_thread;
#endif
#if TLS_MULTIPLE_THREADS_IN_TCB || !defined USE_TLS || !TLS_DTV_AT_TP
new_thread->p_multiple_threads = 1;
#endif
new_thread->p_tid = new_thread_id;
new_thread->p_lock = &(__pthread_handles[sseg].h_lock);
new_thread->p_cancelstate = PTHREAD_CANCEL_ENABLE;
new_thread->p_canceltype = PTHREAD_CANCEL_DEFERRED;
#if !(USE_TLS && HAVE___THREAD)
new_thread->p_errnop = &new_thread->p_errno;
new_thread->p_h_errnop = &new_thread->p_h_errno;
new_thread->p_resp = &new_thread->p_res;
#endif
new_thread->p_guardaddr = guardaddr;
new_thread->p_guardsize = guardsize;
new_thread->p_nr = sseg;
new_thread->p_inheritsched = attr ? attr->__inheritsched : 0;
new_thread->p_alloca_cutoff = stksize / 4 > __MAX_ALLOCA_CUTOFF
? __MAX_ALLOCA_CUTOFF : stksize / 4;
/* Initialize the thread handle */
__pthread_init_lock(&__pthread_handles[sseg].h_lock);
__pthread_handles[sseg].h_descr = new_thread;
__pthread_handles[sseg].h_bottom = new_thread_bottom;
/* Determine scheduling parameters for the thread */
new_thread->p_start_args.schedpolicy = -1;
if (attr != NULL) {
new_thread->p_detached = attr->__detachstate;
new_thread->p_userstack = attr->__stackaddr_set;
switch(attr->__inheritsched) {
case PTHREAD_EXPLICIT_SCHED:
new_thread->p_start_args.schedpolicy = attr->__schedpolicy;
memcpy (&new_thread->p_start_args.schedparam, &attr->__schedparam,
sizeof (struct sched_param));
break;
case PTHREAD_INHERIT_SCHED:
new_thread->p_start_args.schedpolicy = __sched_getscheduler(father_pid);
__sched_getparam(father_pid, &new_thread->p_start_args.schedparam);
break;
}
new_thread->p_priority =
new_thread->p_start_args.schedparam.sched_priority;
}
/* Finish setting up arguments to pthread_start_thread */
new_thread->p_start_args.start_routine = start_routine;
new_thread->p_start_args.arg = arg;
new_thread->p_start_args.mask = *mask;
/* Make the new thread ID available already now. If any of the later
functions fail we return an error value and the caller must not use
the stored thread ID. */
*thread = new_thread_id;
/* Raise priority of thread manager if needed */
__pthread_manager_adjust_prio(new_thread->p_priority);
/* Do the cloning. We have to use two different functions depending
on whether we are debugging or not. */
pid = 0; /* Note that the thread never can have PID zero. */
if (report_events)
{
/* See whether the TD_CREATE event bit is set in any of the
masks. */
int idx = __td_eventword (TD_CREATE);
uint32_t mask = __td_eventmask (TD_CREATE);
if ((mask & (__pthread_threads_events.event_bits[idx]
| event_maskp->event_bits[idx])) != 0)
{
/* Lock the mutex the child will use now so that it will stop. */
__pthread_lock(new_thread->p_lock, NULL);
/* We have to report this event. */
#ifdef NEED_SEPARATE_REGISTER_STACK
/* Perhaps this version should be used on all platforms. But
this requires that __clone2 be uniformly supported
everywhere.
And there is some argument for changing the __clone2
interface to pass sp and bsp instead, making it more IA64
specific, but allowing stacks to grow outward from each
other, to get less paging and fewer mmaps. */
pid = __clone2(pthread_start_thread_event,
(void **)new_thread_bottom,
(char *)stack_addr - new_thread_bottom,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_SYSVSEM |
__pthread_sig_cancel, new_thread);
#elif _STACK_GROWS_UP
pid = __clone(pthread_start_thread_event, (void *) new_thread_bottom,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_SYSVSEM |
__pthread_sig_cancel, new_thread);
#else
pid = __clone(pthread_start_thread_event, stack_addr,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_SYSVSEM |
__pthread_sig_cancel, new_thread);
#endif
saved_errno = errno;
if (pid != -1)
{
/* Now fill in the information about the new thread in
the newly created thread's data structure. We cannot let
the new thread do this since we don't know whether it was
already scheduled when we send the event. */
new_thread->p_eventbuf.eventdata = new_thread;
new_thread->p_eventbuf.eventnum = TD_CREATE;
__pthread_last_event = new_thread;
/* We have to set the PID here since the callback function
in the debug library will need it and we cannot guarantee
the child got scheduled before the debugger. */
new_thread->p_pid = pid;
/* Now call the function which signals the event. */
__linuxthreads_create_event ();
/* Now restart the thread. */
__pthread_unlock(new_thread->p_lock);
}
}
}
if (pid == 0)
{
#ifdef NEED_SEPARATE_REGISTER_STACK
pid = __clone2(pthread_start_thread,
(void **)new_thread_bottom,
(char *)stack_addr - new_thread_bottom,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_SYSVSEM |
__pthread_sig_cancel, new_thread);
#elif _STACK_GROWS_UP
pid = __clone(pthread_start_thread, (void *) new_thread_bottom,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_SYSVSEM |
__pthread_sig_cancel, new_thread);
#else
pid = __clone(pthread_start_thread, stack_addr,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_SYSVSEM |
__pthread_sig_cancel, new_thread);
#endif /* !NEED_SEPARATE_REGISTER_STACK */
saved_errno = errno;
}
/* Check if cloning succeeded */
if (pid == -1) {
/* Free the stack if we allocated it */
if (attr == NULL || !attr->__stackaddr_set)
{
#ifdef NEED_SEPARATE_REGISTER_STACK
size_t stacksize = ((char *)(new_thread->p_guardaddr)
- new_thread_bottom);
munmap((caddr_t)new_thread_bottom,
2 * stacksize + new_thread->p_guardsize);
#elif _STACK_GROWS_UP
# ifdef USE_TLS
size_t stacksize = guardaddr - stack_addr;
munmap(stack_addr, stacksize + guardsize);
# else
size_t stacksize = guardaddr - (char *)new_thread;
munmap(new_thread, stacksize + guardsize);
# endif
#else
# ifdef USE_TLS
size_t stacksize = stack_addr - new_thread_bottom;
# else
size_t stacksize = (char *)(new_thread+1) - new_thread_bottom;
# endif
munmap(new_thread_bottom - guardsize, guardsize + stacksize);
#endif
}
#ifdef USE_TLS
# if TLS_DTV_AT_TP
new_thread = (pthread_descr) ((char *) new_thread + TLS_PRE_TCB_SIZE);
# endif
_dl_deallocate_tls (new_thread, true);
#endif
__pthread_handles[sseg].h_descr = NULL;
__pthread_handles[sseg].h_bottom = NULL;
__pthread_handles_num--;
return saved_errno;
}
/* Insert new thread in doubly linked list of active threads */
new_thread->p_prevlive = __pthread_main_thread;
new_thread->p_nextlive = __pthread_main_thread->p_nextlive;
__pthread_main_thread->p_nextlive->p_prevlive = new_thread;
__pthread_main_thread->p_nextlive = new_thread;
/* Set pid field of the new thread, in case we get there before the
child starts. */
new_thread->p_pid = pid;
return 0;
}
int __pthread_initialize_manager(void)
{
int manager_pipe[2];
int pid;
struct pthread_request request;
#ifndef HAVE_Z_NODELETE
if (__builtin_expect (&__dso_handle != NULL, 1))
__cxa_atexit ((void (*) (void *)) pthread_atexit_retcode, NULL,
__dso_handle);
#endif
if (__pthread_max_stacksize == 0)
__pthread_init_max_stacksize ();
/* If basic initialization not done yet (e.g. we're called from a
constructor run before our constructor), do it now */
if (__pthread_initial_thread_bos == NULL) pthread_initialize();
/* Setup stack for thread manager */
__pthread_manager_thread_bos = malloc(THREAD_MANAGER_STACK_SIZE);
if (__pthread_manager_thread_bos == NULL) return -1;
__pthread_manager_thread_tos =
__pthread_manager_thread_bos + THREAD_MANAGER_STACK_SIZE;
/* Setup pipe to communicate with thread manager */
if (__libc_pipe(manager_pipe) == -1) {
free(__pthread_manager_thread_bos);
return -1;
}
/* Start the thread manager */
pid = 0;
if (__builtin_expect (__pthread_initial_thread.p_report_events, 0))
{
/* It's a bit more complicated. We have to report the creation of
the manager thread. */
int idx = __td_eventword (TD_CREATE);
uint32_t mask = __td_eventmask (TD_CREATE);
if ((mask & (__pthread_threads_events.event_bits[idx]
| __pthread_initial_thread.p_eventbuf.eventmask.event_bits[idx]))
!= 0)
{
__pthread_lock(__pthread_manager_thread.p_lock, NULL);
#ifdef NEED_SEPARATE_REGISTER_STACK
pid = __clone2(__pthread_manager_event,
(void **) __pthread_manager_thread_bos,
THREAD_MANAGER_STACK_SIZE,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#elif _STACK_GROWS_UP
pid = __clone(__pthread_manager_event,
(void **) __pthread_manager_thread_bos,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#else
pid = __clone(__pthread_manager_event,
(void **) __pthread_manager_thread_tos,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#endif
if (pid != -1)
{
/* Now fill in the information about the new thread in
the newly created thread's data structure. We cannot let
the new thread do this since we don't know whether it was
already scheduled when we send the event. */
__pthread_manager_thread.p_eventbuf.eventdata =
&__pthread_manager_thread;
__pthread_manager_thread.p_eventbuf.eventnum = TD_CREATE;
__pthread_last_event = &__pthread_manager_thread;
__pthread_manager_thread.p_tid = 2* PTHREAD_THREADS_MAX + 1;
__pthread_manager_thread.p_pid = pid;
/* Now call the function which signals the event. */
__linuxthreads_create_event ();
}
/* Now restart the thread. */
__pthread_unlock(__pthread_manager_thread.p_lock);
}
}
if (__builtin_expect (pid, 0) == 0)
{
#ifdef NEED_SEPARATE_REGISTER_STACK
pid = __clone2(__pthread_manager, (void **) __pthread_manager_thread_bos,
THREAD_MANAGER_STACK_SIZE,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#elif _STACK_GROWS_UP
pid = __clone(__pthread_manager, (void **) __pthread_manager_thread_bos,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#else
pid = __clone(__pthread_manager, (void **) __pthread_manager_thread_tos,
CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
(void *)(long)manager_pipe[0]);
#endif
}
if (__builtin_expect (pid, 0) == -1) {
free(__pthread_manager_thread_bos);
__libc_close(manager_pipe[0]);
__libc_close(manager_pipe[1]);
return -1;
}
__pthread_manager_request = manager_pipe[1]; /* writing end */
__pthread_manager_reader = manager_pipe[0]; /* reading end */
__pthread_manager_thread.p_tid = 2* PTHREAD_THREADS_MAX + 1;
__pthread_manager_thread.p_pid = pid;
/* Make gdb aware of new thread manager */
if (__builtin_expect (__pthread_threads_debug, 0) && __pthread_sig_debug > 0)
{
raise(__pthread_sig_debug);
/* We suspend ourself and gdb will wake us up when it is
ready to handle us. */
__pthread_wait_for_restart_signal(thread_self());
}
/* Synchronize debugging of the thread manager */
request.req_kind = REQ_DEBUG;
TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
(char *) &request, sizeof(request)));
return 0;
}
