Esempi in C++ (Cpp) per abov_glove_mode_enable

Esempio n. 1

File: abov_touchkey.c Progetto: ShinySide/G900F_MM_HK

static void abov_tk_reset(struct abov_tk_info *info)
{
	struct i2c_client *client = info->client;

	if (info->enabled == false)
		return;

	dev_notice(&client->dev, "%s++\n", __func__);
	disable_irq_nosync(info->irq);

	info->enabled = false;

	release_all_fingers(info);

	abov_tk_reset_for_bootmode(info);
	msleep(ABOV_RESET_DELAY);
	abov_tk_dual_detection_mode(info, 1);
	if (info->glovemode)
		abov_glove_mode_enable(client, CMD_GLOVE_ON);

	info->enabled = true;

	enable_irq(info->irq);
	dev_notice(&client->dev, "%s--\n", __func__);
}

Esempio n. 2

File: abov_touchkey.c Progetto: PhilZ-cwm6/android_kernel_samsung_klte

static int abov_tk_resume(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct abov_tk_info *info = i2c_get_clientdata(client);

	if (info->enabled)
		return 0;

	dev_notice(&info->client->dev, "%s: users=%d\n", __func__,
		   info->input_dev->users);
#if 0
	abov_tk_reset_for_bootmode(info);
	msleep(ABOV_RESET_DELAY);
	if (info->glovemode)
		abov_glove_mode_enable(client, CMD_GLOVE_ON);
#else
	if (info->pdata->power) {
		info->pdata->power(info->pdata, true);
		msleep(ABOV_RESET_DELAY);
	} else
		/* touchkey on by i2c */
		get_tk_fw_version(info, true);
#endif
	info->enabled = true;

	enable_irq(info->irq);

	return 0;
}

Esempio n. 3

File: abov_touchkey.c Progetto: PhilZ-cwm6/android_kernel_samsung_klte

static ssize_t touchkey_fw_update(struct device *dev,
			struct device_attribute *attr, const char *buf, size_t count)
{
	struct abov_tk_info *info = dev_get_drvdata(dev);
	struct i2c_client *client = info->client;
	int ret;
	u8 cmd;

	if (info->fw_update_possible == false) {
		dev_err(&client->dev, "%s fail (no reset pin)\n", __func__);
		info->fw_update_state = 2;
		goto touchkey_fw_update_out;
	}

	switch(*buf) {
	case 's':
	case 'S':
		cmd = BUILT_IN;
		break;
	case 'i':
	case 'I':
		cmd = SDCARD;
		break;
	default:
		info->fw_update_state = 2;
		goto touchkey_fw_update_out;
	}

	info->fw_update_state = 1;
	disable_irq(info->irq);
	info->enabled = false;
	ret = abov_flash_fw(info, false, cmd);
	if (info->glovemode)
		abov_glove_mode_enable(client, CMD_GLOVE_ON);
	info->enabled = true;
	enable_irq(info->irq);
	if (ret) {
		dev_err(&client->dev, "%s fail\n", __func__);
		info->fw_update_state = 2;
	} else {
		dev_notice(&client->dev, "%s success\n", __func__);
		info->fw_update_state = 0;
	}

touchkey_fw_update_out:
	dev_dbg(&client->dev, "%s : %d\n", __func__, info->fw_update_state);

	return count;
}

Esempio n. 4

File: abov_touchkey.c Progetto: PhilZ-cwm6/android_kernel_samsung_klte

static ssize_t abov_glove_mode(struct device *dev,
	 struct device_attribute *attr, const char *buf, size_t count)
{
	struct abov_tk_info *info = dev_get_drvdata(dev);
	struct i2c_client *client = info->client;
	int scan_buffer;
	int ret;
	u8 cmd;

	ret = sscanf(buf, "%d", &scan_buffer);
	if (ret != 1) {
		dev_err(&client->dev, "%s: cmd read err\n", __func__);
		return count;
	}

	if (!(scan_buffer == 0 || scan_buffer == 1)) {
		dev_err(&client->dev, "%s: wrong command(%d)\n",
			__func__, scan_buffer);
		return count;
	}

	if (!info->enabled)
		return count;

	if (info->glovemode == scan_buffer) {
		dev_info(&client->dev, "%s same command(%d)\n",
			__func__, scan_buffer);
		return count;
	}

	if (scan_buffer == 1) {
		dev_notice(&client->dev, "%s glove mode\n", __func__);
		cmd = CMD_GLOVE_ON;
	} else {
		dev_notice(&client->dev, "%s normal mode\n", __func__);
		cmd = CMD_GLOVE_OFF;
	}

	ret = abov_glove_mode_enable(client, cmd);
	if (ret < 0) {
		dev_err(&client->dev, "%s fail(%d)\n", __func__, ret);
		return count;
	}

	info->glovemode = scan_buffer;

	return count;
}