Esempi in C++ (Cpp) per add_button_spec

Esempio n. 1

File: offset.c Progetto: CalcMan/model-t

static void
rebuild_offset_screen(offset_screen_t* s)
{
  uint32_t num_buttons = 0;
  button_spec_t buttons[3];
  char* text;
  char* units_subtext;
  char* probe1_subtext = NULL;
  char* probe2_subtext = NULL;

  bool sensor1_connected = get_sensor_conn_status(SENSOR_1);
  bool sensor2_connected = get_sensor_conn_status(SENSOR_2);

  sensor_config_t* sensor1_cfg = get_sensor_cfg(SENSOR_1);
  sensor_config_t* sensor2_cfg = get_sensor_cfg(SENSOR_2);

  quantity_t probe1_offset = app_cfg_get_probe_offset(sensor1_cfg->sensor_serial);
  quantity_t probe2_offset = app_cfg_get_probe_offset(sensor2_cfg->sensor_serial);

  if (app_cfg_get_temp_unit() == UNIT_TEMP_DEG_F) {
    units_subtext = "F";
  }
  else {
    probe1_offset.value *= (5.0f / 9.0f);
    probe2_offset.value *= (5.0f / 9.0f);
    units_subtext = "C";
  }

  if (sensor1_connected == true) {
    text = "Probe 1 Offset";
    probe1_subtext = malloc(128);
    snprintf(probe1_subtext, 128, "Probe 1 Offset: %d.%d %s",
         (int)(probe1_offset.value),
         ((int)(fabs(probe1_offset.value) * 10.0f)) % 10,
         units_subtext);
    add_button_spec(buttons, &num_buttons, probe1_offset_button_clicked, img_temp_med, AMBER,
        text, probe1_subtext, s);
  }

  if (sensor2_connected == true) {
    text = "Probe 2 Offset";
    probe2_subtext = malloc(128);
    snprintf(probe2_subtext, 128, "Probe 2 Offset: %d.%d %s",
         (int)(probe2_offset.value),
         ((int)(fabs(probe2_offset.value) * 10.0f)) % 10,
         units_subtext);

    add_button_spec(buttons, &num_buttons, probe2_offset_button_clicked, img_temp_med, MAGENTA,
        text, probe2_subtext, s);
  }

  button_list_set_buttons(s->button_list, buttons, num_buttons);

  if (probe1_subtext != NULL)
    free(probe1_subtext);

  if (probe2_subtext != NULL)
    free(probe2_subtext);
}

Esempio n. 2

File: controller_settings.c Progetto: slobrewer/model-t

static void
set_controller_settings(controller_settings_screen_t* s)
{
  uint32_t num_buttons = 0;
  button_spec_t buttons[16];

  char* subtext;
  char* setpoint_subtext;

  switch (s->settings.setpoint_type) {
    case SP_STATIC:
      subtext = "Static Setpoint - Temp is held at fixed value";
      break;

    case SP_TEMP_PROFILE:
      subtext = "Temp Profile - Temp follows customized profile";
      break;

    default:
      subtext = "Invalid setpoint type!";
      break;
  }
  add_button_spec(buttons, &num_buttons, setpoint_type_button_clicked, img_snowflake, CYAN,
      "Setpoint Type", subtext, s);

  setpoint_subtext = malloc(128);
  switch (s->settings.setpoint_type) {
    case SP_STATIC:
    {
      quantity_t setpoint = quantity_convert(s->settings.static_setpoint, app_cfg_get_temp_unit());

      if (setpoint.unit == UNIT_TEMP_DEG_F)
        subtext = "F";
      else
        subtext = "C";

      snprintf(setpoint_subtext, 128, "Setpoint value: %d.%d %s",
          (int)(setpoint.value),
          ((int)(fabs(setpoint.value) * 10.0f)) % 10, subtext);

      add_button_spec(buttons, &num_buttons, static_setpoint_button_clicked, img_snowflake, CYAN,
          "Static Setpoint", setpoint_subtext, s);
      break;
    }

    case SP_TEMP_PROFILE:
    {
      const temp_profile_t* tp = app_cfg_get_temp_profile(s->settings.temp_profile_id);
      if (tp != NULL)
        snprintf(setpoint_subtext, 128, "Selected profile: '%s'", tp->name);
      else
        snprintf(setpoint_subtext, 128, "Selected profile: id=%u", (unsigned int)s->settings.temp_profile_id);

      add_button_spec(buttons, &num_buttons, temp_profile_button_clicked, img_snowflake, CYAN,
          "Temp Profile", setpoint_subtext, s);
      break;
    }

    default:
      break;
  }

  switch (s->output_selection) {
    case SELECT_1:
      subtext = "Use Output #1";
      break;

    case SELECT_2:
      subtext = "Use Output #2";
      break;

    case SELECT_1_2:
      subtext = "Use Output #1 & #2";
      break;

    default:
    case SELECT_NONE:
      subtext = "No output";
      break;
  }

  add_button_spec(buttons, &num_buttons, output_selection_button_clicked, img_plug, CYAN,
      "Output Selection", subtext, s);

  if (s->settings.output_settings[OUTPUT_1].enabled)
    add_button_spec(buttons, &num_buttons, output_settings_button_clicked, img_plug, CYAN,
        "Output 1 Settings", "Set settings for output 1", &s->settings.output_settings[OUTPUT_1]);

  if (s->settings.output_settings[OUTPUT_2].enabled)
    add_button_spec(buttons, &num_buttons, output_settings_button_clicked, img_plug, CYAN,
        "Output 2 Settings", "Set settings for output 2", &s->settings.output_settings[OUTPUT_2]);

  button_list_set_buttons(s->button_list, buttons, num_buttons);
  free(setpoint_subtext);
}