int application_start(int argc, char *argv[])
{
#if AOS_ATCMD
uart_dev_t at_uart;
at_uart_configure(&at_uart);
at.init(&at_uart, AT_RECV_DELIMITER, AT_SEND_DELIMITER, 1000);
at.set_mode(ASYN);
#endif
#ifdef WITH_SAL
sal_init();
#endif
parse_opt(argc, argv);
aos_set_log_level(AOS_LL_DEBUG);
#ifndef AOS_AT_ADAPTER
if (mesh_mode == MESH_MASTER) {
#ifdef CONFIG_AOS_DDM
ddm_run(argc, argv);
#endif
return 0;
}
#ifdef CONFIG_AOS_DDA
dda_enable(atoi(mesh_num));
dda_service_init();
#endif
#endif // #ifndef AOS_AT_ADAPTER
aos_cli_register_command(&uuidcmd);
alink_cloud_init();
if (mesh_mode == MESH_GATEWAY) {
aos_cli_register_command(&ncmd);
aos_cli_register_command(&modelcmd);
aos_cli_register_command(&resetcmd);
if (env == SANDBOX)
alink_enable_sandbox_mode();
else if (env == DAILY)
alink_enable_daily_mode(NULL, 0);
#ifndef AOS_AT_ADAPTER
aos_register_event_filter(EV_WIFI, alink_service_event, NULL);
#else
aos_register_event_filter(EV_AT, alink_service_event, NULL);
#endif
aos_register_event_filter(EV_SYS, alink_connect_event, NULL);
aos_register_event_filter(EV_KEY, alink_key_process, NULL);
#ifndef AOS_AT_ADAPTER
aos_register_event_filter(EV_YUNIO, auto_active_handler, NULL);
auto_netmgr = get_auto_netmgr_config();
awss_register_callback(AWSS_HOTSPOT_CONNECTED,
&awss_hotspot_connected_handler);
awss_register_callback(AWSS_HOTSPOT_SWITCH_AP_DONE,
&awss_hotspot_switch_ap_done_handler);
if (auto_netmgr) start_auto_netmgr_timer();
#else
auto_netmgr = false;
at_adapter_init();
#endif
netmgr_init();
netmgr_start(auto_netmgr);
}
#if defined(CONFIG_AOS_DDA) && !defined(AOS_AT_ADAPTER)
dda_service_start();
#else
aos_loop_run();
LOG("alink end.");
alink_end();
#endif
return 0;
}
int ICACHE_FLASH_ATTR alink_demo()
{
struct device_info main_dev;
memset(&main_dev, 0, sizeof(main_dev));
alink_fill_deviceinfo(&main_dev); // 必须根据PRD表格更新设备信息
//alink_set_loglevel(ALINK_LL_DEBUG | ALINK_LL_INFO | ALINK_LL_WARN | ALINK_LL_ERROR);
alink_set_loglevel(ALINK_LL_ERROR);
//alink_enable_sandbox_mode(); // 线上环境需要注解此函数
main_dev.sys_callback[ALINK_FUNC_SERVER_STATUS] = alink_handler_systemstates_callback;
alink_set_callback(ALINK_FUNC_AVAILABLE_MEMORY, print_mem_callback);
/* ALINK_CONFIG_LEN 2048 */
alink_register_cb(ALINK_FUNC_READ_CONFIG, (void *)&read_config);
alink_register_cb(ALINK_FUNC_WRITE_CONFIG, (void *)&write_config);
alink_register_cb(ALINK_FUNC_GET_STATUS, alink_get_debuginfo);
//alink_enable_sandbox(&main_dev); // 线上环境需要注解此函数
alink_register_cb(ALINK_FUNC_OTA_FIRMWARE_SAVE, esp_ota_firmware_update);
alink_register_cb(ALINK_FUNC_OTA_UPGRADE, esp_ota_upgrade);
/*start alink-sdk */
#ifdef PASS_THROUGH //透传方式(设备与服务器采用raw data通讯)
alink_start_rawdata(&main_dev, rawdata_get_callback, rawdata_set_callback);
#else // 非透传方式(设备与服务器采用json格式数据通讯)
main_dev.dev_callback[ACB_GET_DEVICE_STATUS] = main_dev_get_device_status_callback;
main_dev.dev_callback[ACB_SET_DEVICE_STATUS] = main_dev_set_device_status_callback;
alink_start(&main_dev); //register main device here
#endif //PASS_THROUGH
os_printf("%s %d wait time=%d \n", __FUNCTION__, __LINE__, ALINK_WAIT_FOREVER);
ESP_DBG(("^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^"));
if (ALINK_OK == alink_wait_connect(NULL, ALINK_WAIT_FOREVER)) //wait main device login, -1 means wait forever
{
#if USER_UART_CTRL_DEV_EN
char send_buf_alink_connOK[] = { 0x31, 0x31, 0x31, 0x31 }; // demo data to tell uart mcu dev, alink conn success
uart0_write_data(send_buf_alink_connOK, sizeof(send_buf_alink_connOK));
#endif
}
else
{
#if USER_UART_CTRL_DEV_EN
char send_buf_alink_connFailed[] = { 0x32, 0x32, 0x32, 0x32 }; // demo data to tell uart mcu dev, alink conn success
uart0_write_data(send_buf_alink_connFailed, sizeof(send_buf_alink_connFailed));
#endif
}
if (need_notify_app) {
need_notify_app = 0;
uint8 macaddr[6];
char mac[17 + 1];
if (wifi_get_macaddr(0, macaddr)) {
os_printf("macaddr=%02x:%02x:%02x:%02x:%02x:%02x\n", MAC2STR(macaddr));
snprintf(mac, sizeof(mac), "%02x:%02x:%02x:%02x:%02x:%02x", MAC2STR(macaddr));
zconfig_notify_app(DEV_MODEL, mac, ""); // if not factory reset ,
}
}
//printf("%s %d \n",__FUNCTION__,__LINE__);
//printf("alink_demo heap_size %d\n",system_get_free_heap_size());
//system_print_meminfo();
/* 设备主动上报数据 */
while (sample_running) {
//os_printf("%s %d \n",__FUNCTION__,__LINE__);
#ifdef PASS_THROUGH
alink_device_post_raw_data();
#else
alink_device_post_data(NULL);
#endif //PASS_THROUGH
if (need_factory_reset) {
wsf_deb("key to factory_reset\n");
need_factory_reset = 0;
alink_factory_reset();
}
alink_sleep(1000);
}
/* 设备退出alink-sdk */
alink_end();
return 0;
}
