Esempi in C++ (Cpp) per allocMatrixMNA

Esempio n. 1

File: tline.cpp Progetto: Freecore/qucs

void tline::initAC (void) {
  nr_double_t l = getPropertyDouble ("L");
  if (l != 0.0) {
    setVoltageSources (0);
    allocMatrixMNA ();
  } else {
    setVoltageSources (1);
    allocMatrixMNA ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
  }
}

Esempio n. 2

File: twistedpair.cpp Progetto: jonnyro/arduino_motorcycle_gauges

void twistedpair::initAC (void) {
  calcLength ();
  if (len != 0.0) {
    setVoltageSources (0);
    allocMatrixMNA ();
  } else {
    setVoltageSources (2);
    allocMatrixMNA ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
    voltageSource (VSRC_2, NODE_3, NODE_4);
  }
}

Esempio n. 3

File: opamp.cpp Progetto: Freecore/qucs

void opamp::initDC (void) {
  allocMatrixMNA ();
  setB (NODE_INP, VSRC_1, 0);
  setB (NODE_OUT, VSRC_1, 1);
  setB (NODE_INM, VSRC_1, 0);
  setC (VSRC_1, NODE_OUT, -1); setD (VSRC_1, VSRC_1, 0); setE (VSRC_1, 0);
}

Esempio n. 4

File: iac.cpp Progetto: Tushar1313/qucs_cvs

void iac::initAC (void) {
  nr_double_t a = getPropertyDouble ("I");
  nr_double_t p = getPropertyDouble ("Phase");
  nr_complex_t i = polar (a, rad (p));
  allocMatrixMNA ();
  setI (NODE_1, +i); setI (NODE_2, -i);
}

Esempio n. 5

File: vccs.cpp Progetto: Tushar1313/qucs_cvs

void vccs::initDC (void) {
  setISource (false);
  allocMatrixMNA ();
  nr_double_t g = getPropertyDouble ("G");
  setY (NODE_2, NODE_1, +g); setY (NODE_3, NODE_4, +g);
  setY (NODE_3, NODE_1, -g); setY (NODE_2, NODE_4, -g);
}

Esempio n. 6

File: hybrid.cpp Progetto: Mehanik/qucs

void hybrid::initAC (void) {
  nr_double_t  k = 2.0 * M_SQRT2;
  nr_complex_t p = polar (1.0, rad (getPropertyDouble ("phi")));
  nr_complex_t d = 2.0 * p * (p - 4.0) - 1.0;
  nr_complex_t y;

  setVoltageSources (0);
  allocMatrixMNA ();
  d *= getPropertyDouble ("Zref");

  y = (-6.0*p*p + 8.0*p - 1.0) / d;
  setY (NODE_1, NODE_1, y); setY (NODE_3, NODE_3, y);

  y = (-2.0*p*p + 8.0*p - 5.0) / d;
  setY (NODE_2, NODE_2, y); setY (NODE_4, NODE_4, y);

  y = 2.0*k * (p * (p - 1.0) - 0.5) / d;
  setY (NODE_1, NODE_3, y); setY (NODE_3, NODE_1, y);

  y = k * (p - 2.0) / d;
  setY (NODE_2, NODE_4, y); setY (NODE_4, NODE_2, y);

  y = k * (-2.0*p + 1.0) / d;
  setY (NODE_1, NODE_4, y); setY (NODE_4, NODE_1, y);
  setY (NODE_2, NODE_3, y); setY (NODE_3, NODE_2, y);

  y = (4.0*p + 4.0) / d;
  setY (NODE_1, NODE_2, y); setY (NODE_2, NODE_1, y);
  setY (NODE_3, NODE_4, y); setY (NODE_4, NODE_3, y);
}

Esempio n. 7

File: strafo.cpp Progetto: jonnyro/arduino_motorcycle_gauges

void strafo::initDC (void) {
  setVoltageSources (3);
  allocMatrixMNA ();
  voltageSource (VSRC_1, NODE_1, NODE_6);
  voltageSource (VSRC_2, NODE_5, NODE_4);
  voltageSource (VSRC_3, NODE_2, NODE_3);
}

Esempio n. 8

File: strafo.cpp Progetto: jonnyro/arduino_motorcycle_gauges

void strafo::initAC (void) {
  nr_double_t t1 = getPropertyDouble ("T1");
  nr_double_t t2 = getPropertyDouble ("T2");

  setVoltageSources (2);
  allocMatrixMNA ();

  setB (NODE_1, VSRC_1, -1.0); setB (NODE_2, VSRC_1, + t1);
  setB (NODE_3, VSRC_1, - t1); setB (NODE_4, VSRC_1, +0.0);
  setB (NODE_5, VSRC_1, +0.0); setB (NODE_6, VSRC_1, +1.0);
  setB (NODE_1, VSRC_2, +0.0); setB (NODE_2, VSRC_2, + t2);
  setB (NODE_3, VSRC_2, - t2); setB (NODE_4, VSRC_2, +1.0);
  setB (NODE_5, VSRC_2, -1.0); setB (NODE_6, VSRC_2, +0.0);

  setC (VSRC_1, NODE_1, +1.0); setC (VSRC_1, NODE_2, - t1);
  setC (VSRC_1, NODE_3, + t1); setC (VSRC_1, NODE_4, +0.0);
  setC (VSRC_1, NODE_5, +0.0); setC (VSRC_1, NODE_6, -1.0);
  setC (VSRC_2, NODE_1, +0.0); setC (VSRC_2, NODE_2, - t2);
  setC (VSRC_2, NODE_3, + t2); setC (VSRC_2, NODE_4, -1.0);
  setC (VSRC_2, NODE_5, +1.0); setC (VSRC_2, NODE_6, +0.0);

  setD (VSRC_1, VSRC_1, 0); setD (VSRC_2, VSRC_2, 0);
  setD (VSRC_1, VSRC_2, 0); setD (VSRC_2, VSRC_1, 0);
  setE (VSRC_1, 0.0);
  setE (VSRC_2, 0.0);
}

Esempio n. 9

File: hybrid.cpp Progetto: Mehanik/qucs

void hybrid::initDC (void) {
  setVoltageSources (2);
  setInternalVoltageSource (1);
  allocMatrixMNA ();
  voltageSource (VSRC_1, NODE_1, NODE_3);
  voltageSource (VSRC_2, NODE_2, NODE_4);
}

Esempio n. 10

File: msmbend.cpp Progetto: Tushar1313/qucs_cvs

void msmbend::initDC (void) {
  // a DC short (voltage source V = 0 volts)
  setVoltageSources (1);
  setInternalVoltageSource (1);
  allocMatrixMNA ();
  clearY ();
  voltageSource (VSRC_1, NODE_1, NODE_2);
}

Esempio n. 11

File: pac.cpp Progetto: Freecore/qucs

void pac::initHB (void) {
  setVoltageSources (1);
  allocMatrixMNA ();
  voltageSource (VSRC_1, NODE_1, NODE_2);
  nr_double_t g = 1.0 / getPropertyDouble ("Z");
  setY (NODE_1, NODE_1, +g); setY (NODE_2, NODE_2, +g);
  setY (NODE_1, NODE_2, -g); setY (NODE_2, NODE_1, -g);
}

Esempio n. 12

File: biastee.cpp Progetto: jonnyro/arduino_motorcycle_gauges

void biastee::initAC (void) {
  setISource (false);
  setVoltageSources (1);
  allocMatrixMNA ();
  clearB ();
  clearC ();
  voltageSource (VSRC_1, NODE_2, NODE_1);
}

Esempio n. 13

File: digital.cpp Progetto: Freecore/qucs

// Initialize constant MNA entries for DC analysis.
void digital::initDC (void) {
  initDigital ();
  allocMatrixMNA ();
  delay = false;
  setB (NODE_OUT, VSRC_1, +1);
  setC (VSRC_1, NODE_OUT, -1);
  setE (VSRC_1, 0);
}

Esempio n. 14

File: resistor.cpp Progetto: Freecore/qucs

// Initialize computation of MNA matrix entries for HB.
void resistor::initHB (void) {
  initModel ();
  nr_double_t r = getScaledProperty ("R");
  setVoltageSources (1);
  setInternalVoltageSource (1);
  allocMatrixMNA ();
  voltageSource (VSRC_1, NODE_1, NODE_2);
  setD (VSRC_1, VSRC_1, -r);
}

Esempio n. 15

File: tline.cpp Progetto: Freecore/qucs

void tline::initTR (void) {
  nr_double_t l = getPropertyDouble ("L");
  nr_double_t z = getPropertyDouble ("Z");
  deleteHistory ();
  if (l > 0.0) {
    setVoltageSources (2);
    allocMatrixMNA ();
    setHistory (true);
    initHistory (l / C0);
    setB (NODE_1, VSRC_1, +1); setB (NODE_2, VSRC_2, +1);
    setC (VSRC_1, NODE_1, +1); setC (VSRC_2, NODE_2, +1);
    setD (VSRC_1, VSRC_1, -z); setD (VSRC_2, VSRC_2, -z); 
  } else {
    setVoltageSources (1);
    allocMatrixMNA ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
  }
}

Esempio n. 16

File: mscross.cpp Progetto: Freecore/qucs

void mscross::initDC (void) {
  initModel ();
  setVoltageSources (5);
  allocMatrixMNA ();
  voltageSource (VSRC_1, NODE_1, NODE_5);
  voltageSource (VSRC_2, NODE_3, NODE_5);
  voltageSource (VSRC_3, NODE_2, NODE_6);
  voltageSource (VSRC_4, NODE_4, NODE_6);
  voltageSource (VSRC_5, NODE_5, NODE_6);
}

Esempio n. 17

File: digisource.cpp Progetto: Tushar1313/qucs_cvs

void digisource::initDC (void) {
  char * init = getPropertyString ("init");
  nr_double_t v = getPropertyDouble ("V");
  bool lo = !strcmp (init, "low");
  allocMatrixMNA ();
  setC (VSRC_1, NODE_1, 1.0);
  setB (NODE_1, VSRC_1, 1.0);
  setD (VSRC_1, VSRC_1, 0.0);
  setE (VSRC_1, lo ? 0 : v);
}

Esempio n. 18

File: vcvs.cpp Progetto: Tushar1313/qucs_cvs

void vcvs::initDC (void) {
  nr_double_t g = getPropertyDouble ("G");
  allocMatrixMNA ();
  setC (VSRC_1, NODE_1, +g); setC (VSRC_1, NODE_2, -1.0);
  setC (VSRC_1, NODE_3, +1.0); setC (VSRC_1, NODE_4, -g);
  setB (NODE_1, VSRC_1, +0); setB (NODE_2, VSRC_1, -1.0);
  setB (NODE_3, VSRC_1, +1.0); setB (NODE_4, VSRC_1, +0);
  setD (VSRC_1, VSRC_1, 0.0);
  setE (VSRC_1, 0.0);
}

Esempio n. 19

File: resistor.cpp Progetto: Freecore/qucs

void resistor::initDC (void) {
  initModel ();
  nr_double_t r = getScaledProperty ("R");

  // for non-zero resistances usual MNA entries
  if (r != 0.0) {
    nr_double_t g = 1.0 / r;
    setVoltageSources (0);
    allocMatrixMNA ();
    setY (NODE_1, NODE_1, +g); setY (NODE_2, NODE_2, +g);
    setY (NODE_1, NODE_2, -g); setY (NODE_2, NODE_1, -g);
  }
  // for zero resistances create a zero voltage source
  else {
    setVoltageSources (1);
    setInternalVoltageSource (1);
    allocMatrixMNA ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
  }
}

Esempio n. 20

File: tline.cpp Progetto: Freecore/qucs

void tline::initDC (void) {
  nr_double_t z = getPropertyDouble ("Z");
  nr_double_t a = getPropertyDouble ("Alpha");
  nr_double_t l = getPropertyDouble ("L");
  a = log (a) / 2;
  if (a * l != 0.0) {
    setVoltageSources (0);
    allocMatrixMNA ();
    a = exp (a * l);
    nr_double_t f = 1 / z / (a - 1);
    nr_double_t y11 = +f * (a + 1);
    nr_double_t y21 = -f * 2 * sqrt (a);
    setY (NODE_1, NODE_1, y11); setY (NODE_2, NODE_2, y11);
    setY (NODE_1, NODE_2, y21); setY (NODE_2, NODE_1, y21);
  } else {
    setVoltageSources (1);
    allocMatrixMNA ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
  }
}

Esempio n. 21

File: cccs.cpp Progetto: Tushar1313/qucs_cvs

void cccs::initDC (void) {
  setISource (false);
  allocMatrixMNA ();
  nr_double_t g = getPropertyDouble ("G");
  setC (VSRC_1, NODE_1, +1.0); setC (VSRC_1, NODE_2, +0.0);
  setC (VSRC_1, NODE_3, +0.0); setC (VSRC_1, NODE_4, -1.0);
  setB (NODE_1, VSRC_1, +1/g); setB (NODE_2, VSRC_1, +1.0);
  setB (NODE_3, VSRC_1, -1.0); setB (NODE_4, VSRC_1, -1/g);
  setD (VSRC_1, VSRC_1, 0.0);
  setE (VSRC_1, 0.0);
}

Esempio n. 22

File: msvia.cpp Progetto: Freecore/qucs

void msvia::initDC (void) {
  nr_double_t r = calcResistance ();

  // for non-zero resistances usual MNA entries
  if (r != 0.0) {
    nr_double_t g = 1.0 / r;
    setVoltageSources (0);
    allocMatrixMNA ();
    setY (NODE_1, NODE_1, +g); setY (NODE_2, NODE_2, +g);
    setY (NODE_1, NODE_2, -g); setY (NODE_2, NODE_1, -g);
  }
  // for zero resistances create a zero voltage source
  else {
    setVoltageSources (1);
    setInternalVoltageSource (1);
    allocMatrixMNA ();
    clearY ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
  }
}

Esempio n. 23

File: cpwstep.cpp Progetto: jonnyro/arduino_motorcycle_gauges

void cpwstep::initAC (void) {
  setVoltageSources (2);
  setInternalVoltageSource (true);
  allocMatrixMNA ();
  setB (NODE_1, VSRC_1, +1.0); setB (NODE_1, VSRC_2, +0.0);
  setB (NODE_2, VSRC_1, +0.0); setB (NODE_2, VSRC_2, +1.0);
  setC (VSRC_1, NODE_1, -1.0); setC (VSRC_1, NODE_2, +0.0);
  setC (VSRC_2, NODE_1, +0.0); setC (VSRC_2, NODE_2, -1.0);
  setE (VSRC_1, +0.0); setE (VSRC_2, +0.0);
  checkProperties ();
}

Esempio n. 24

File: coaxline.cpp Progetto: Freecore/qucs

void coaxline::initDC (void) {
  nr_double_t l   = getPropertyDouble ("L");
  nr_double_t d   = getPropertyDouble ("d");
  nr_double_t rho = getPropertyDouble ("rho");

  if (d != 0.0 && rho != 0.0 && l != 0.0) {
    // a tiny resistance
    nr_double_t g = M_PI * sqr (d / 2) / rho / l;
    setVoltageSources (0);
    allocMatrixMNA ();
    setY (NODE_1, NODE_1, +g); setY (NODE_2, NODE_2, +g);
    setY (NODE_1, NODE_2, -g); setY (NODE_2, NODE_1, -g);
  }
  else {
    // a DC short
    setVoltageSources (1);
    setInternalVoltageSource (1);
    allocMatrixMNA ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
  }
}

Esempio n. 25

File: irect.cpp Progetto: jonnyro/arduino_motorcycle_gauges

void irect::initDC (void) {
  nr_double_t th = getPropertyDouble ("TH");
  nr_double_t tl = getPropertyDouble ("TL");
  nr_double_t tr = getPropertyDouble ("Tr");
  nr_double_t tf = getPropertyDouble ("Tf");
  if (tr > th) tr = th;
  if (tf > tl) tf = tl;
  nr_double_t a  = (th + (tf - tr) / 2) / (th + tl);
  nr_double_t i  = getPropertyDouble ("I") * a;
  allocMatrixMNA ();
  setI (NODE_1, +i); setI (NODE_2, -i);
}

Esempio n. 26

File: amplifier.cpp Progetto: Tushar1313/qucs_cvs

/*! DC model initialization. 
    An ideal amplifier is characterized by the following 
    Y-matrix:
    \f[
    \begin{pmatrix}
    \dfrac{1}{Z_1} & 0 \\
    \dfrac{-2}{\sqrt{Z_1\cdot Z_2}} & \dfrac{1}{Z_2}
    \end{pmatrix}
    \f]
    With \f$Z_1\f$ and \f$Z_2\f$ the impedance of the port 1 and 2 and 
    \f$G\f$ the gain.
*/
void amplifier::initDC (void) {
  nr_double_t g = getPropertyDouble ("G");
  nr_double_t z1 = getPropertyDouble ("Z1");
  nr_double_t z2 = getPropertyDouble ("Z2");

  allocMatrixMNA ();

  setY (NODE_1, NODE_1, 1 / z1);
  setY (NODE_1, NODE_2, 0);
  setY (NODE_2, NODE_1, -2 * g / sqrt (z1 * z2));
  setY (NODE_2, NODE_2, 1 / z2);
}

Esempio n. 27

File: bondwire.cpp Progetto: Tushar1313/qucs_cvs

/*! DC model initialization.
 *! DC model of a bondwire is a resistance.
 */
void bondwire::initDC (void) {
  nr_double_t g;

  getProperties ();

  /* for non-zero resistances usual MNA entries */
  if (rho != 0.0) {
    g = 1.0 / resistance (0);
    setVoltageSources (0);
    allocMatrixMNA ();
    setY (NODE_1, NODE_1, +g); setY (NODE_2, NODE_2, +g);
    setY (NODE_1, NODE_2, -g); setY (NODE_2, NODE_1, -g);
  }
  /* for zero resistances create a zero voltage source */
  else {
    setVoltageSources (1);
    setInternalVoltageSource (1);
    allocMatrixMNA ();
    clearY ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
  }
}

Esempio n. 28

File: inductor.cpp Progetto: Tushar1313/qucs_cvs

void inductor::initAC (void) {
  nr_double_t l = getPropertyDouble ("L");

  // for non-zero inductance usual MNA entries
  if (l != 0.0) {
    setVoltageSources (0);
    allocMatrixMNA ();
  }
  // for zero inductance create a zero voltage source
  else {
    initDC ();
    calcDC ();
  }
}

Esempio n. 29

File: isolator.cpp Progetto: Freecore/qucs

void isolator::initDC (void) {
  nr_double_t z1 = getPropertyDouble ("Z1");
  nr_double_t z2 = getPropertyDouble ("Z2");
#if AUGMENTED
  nr_double_t z21 = 2 * sqrt (z1 * z2);
  setVoltageSources (2);
  allocMatrixMNA ();
  setB (NODE_1, VSRC_1, +1.0); setB (NODE_1, VSRC_2, +0.0);
  setB (NODE_2, VSRC_1, +0.0); setB (NODE_2, VSRC_2, +1.0);
  setC (VSRC_1, NODE_1, -1.0); setC (VSRC_1, NODE_2, +0.0);
  setC (VSRC_2, NODE_1, +0.0); setC (VSRC_2, NODE_2, -1.0); 
  setD (VSRC_1, VSRC_1,  +z1); setD (VSRC_2, VSRC_2,  +z2);
  setD (VSRC_1, VSRC_2, +0.0); setD (VSRC_2, VSRC_1, +z21);
  setE (VSRC_1, +0.0); setE (VSRC_2, +0.0);
#else
  setVoltageSources (0);
  allocMatrixMNA ();
  setY (NODE_1, NODE_1, 1 / z1);
  setY (NODE_1, NODE_2, 0);
  setY (NODE_2, NODE_1, -2 / sqrt (z1 * z2));
  setY (NODE_2, NODE_2, 1 / z2);
#endif
}

Esempio n. 30

File: twistedpair.cpp Progetto: jonnyro/arduino_motorcycle_gauges

void twistedpair::initDC (void) {
  nr_double_t d   = getPropertyDouble ("d");
  nr_double_t rho = getPropertyDouble ("rho");
  calcLength ();

  if (d != 0.0 && rho != 0.0 && len != 0.0) {
    // tiny resistances
    nr_double_t g1 = M_PI * sqr (d / 2) / rho / len;
    nr_double_t g2 = g1;
    setVoltageSources (0);
    allocMatrixMNA ();
    setY (NODE_1, NODE_1, +g1); setY (NODE_2, NODE_2, +g1);
    setY (NODE_1, NODE_2, -g1); setY (NODE_2, NODE_1, -g1);
    setY (NODE_3, NODE_3, +g2); setY (NODE_4, NODE_4, +g2);
    setY (NODE_3, NODE_4, -g2); setY (NODE_4, NODE_3, -g2);
  }
  else {
    // DC shorts
    setVoltageSources (2);
    allocMatrixMNA ();
    voltageSource (VSRC_1, NODE_1, NODE_2);
    voltageSource (VSRC_2, NODE_3, NODE_4);
  }
}