static int enc_set_br(MSFilter *f, void *arg){
SpeexEncState *s=(SpeexEncState*)f->data;
ms_filter_lock(f);
s->maxbitrate=((int*)arg)[0];
if (s->state) apply_max_bitrate(s);
ms_filter_unlock(f);
return 0;
}
static void ms_opus_enc_preprocess(MSFilter *f) {
int error;
OpusEncData *d = (OpusEncData *)f->data;
/* create the encoder */
d->state = opus_encoder_create(d->samplerate, d->channels, d->application, &error);
if (error != OPUS_OK) {
ms_error("Opus encoder creation failed: %s", opus_strerror(error));
return;
}
/* set complexity to 0 for single processor arm devices */
#if defined(__arm__) || defined(_M_ARM)
if (ms_factory_get_cpu_count(f->factory)==1){
opus_encoder_ctl(d->state, OPUS_SET_COMPLEXITY(0));
}else{
opus_encoder_ctl(d->state, OPUS_SET_COMPLEXITY(5));
}
#endif
error = opus_encoder_ctl(d->state, OPUS_SET_PACKET_LOSS_PERC(10));
if (error != OPUS_OK) {
ms_error("Could not set default loss percentage to opus encoder: %s", opus_strerror(error));
}
/* set the encoder parameters: VBR, IN_BAND_FEC, DTX and bitrate settings */
ms_opus_enc_set_vbr(f);
ms_opus_enc_set_inbandfec(f);
ms_opus_enc_set_dtx(f);
/* if decoder prefers mono signal, force encoder to output mono signal */
if (d->stereo == 0) {
error = opus_encoder_ctl(d->state, OPUS_SET_FORCE_CHANNELS(1));
if (error != OPUS_OK) {
ms_error("could not force mono channel to opus encoder: %s", opus_strerror(error));
}
if (d->channels == 2) ms_message("Opus encoder configured to encode mono despite it is feed with stereo.");
}else if (d->channels == 2){
ms_message("Opus encoder configured to encode stereo.");
}
ms_filter_lock(f);
// set bitrate wasn't call, compute it with the default network bitrate (36000)
if (d->bitrate==-1) {
compute_max_bitrate(d, 0);
}
apply_max_bitrate(d);
ms_filter_unlock(f);
}
static int ms_opus_enc_set_bitrate(MSFilter *f, void *arg) {
OpusEncData *d = (OpusEncData *)f->data;
int ptimeStepValue = 0;
int ptimeStepSign = 1;
int ptimeTarget = d->ptime;
int bitrate = *((int *)arg); // the argument is the network bitrate requested
/* this function also manage the ptime, check if we are increasing or decreasing the bitrate in order to possibly decrease or increase ptime */
if (d->bitrate>0 && d->ptime>0) { /* at first call to set_bitrate(bitrate is initialised at -1), do not modify ptime, neither if it wasn't initialised too */
if (bitrate > d->max_network_bitrate ) {
ptimeStepSign = -1;
}
/* if the change requested is higher than the expected modification gained by changing ptime, do it */
/* target ptime is 20 more or less than current one, but in range [20,120] */
ptimeTarget = d->ptime+ptimeStepSign*20;
if (ptimeTarget<20) {
ptimeTarget = 20;
}
if (ptimeTarget>120) {
ptimeTarget = 120;
}
// ABS(difference of current and requested bitrate) ABS(current network bandwidth overhead - new ptime target overhead)
if ( (d->max_network_bitrate - bitrate)*ptimeStepSign > (((40*8*1000)/d->ptime - (40*8*1000)/ptimeTarget) * ptimeStepSign)) {
ptimeStepValue = 20;
}
}
d->max_network_bitrate = bitrate;
ms_message("opus setbitrate to %d",d->max_network_bitrate);
if (d->bitrate>0 && d->ptime>0) { /*don't apply bitrate before prepocess*/
ms_filter_lock(f);
compute_max_bitrate(d, ptimeStepValue*ptimeStepSign);
apply_max_bitrate(d);
ms_filter_unlock(f);
}
return 0;
}
static void ms_opus_enc_preprocess(MSFilter *f) {
int error;
OpusEncData *d = (OpusEncData *)f->data;
/* create the encoder */
d->state = opus_encoder_create(d->samplerate, d->channels, d->application, &error);
if (error != OPUS_OK) {
ms_error("Opus encoder creation failed: %s", opus_strerror(error));
return;
}
/* set complexity to 0 for arm devices */
#ifdef __arm__
opus_encoder_ctl(d->state, OPUS_SET_COMPLEXITY(0));
#endif
error = opus_encoder_ctl(d->state, OPUS_SET_PACKET_LOSS_PERC(10));
if (error != OPUS_OK) {
ms_error("Could not set default loss percentage to opus encoder: %s", opus_strerror(error));
}
/* set the encoder parameters: VBR, IN_BAND_FEC, DTX and bitrate settings */
ms_opus_enc_set_vbr(f);
ms_opus_enc_set_inbandfec(f);
ms_opus_enc_set_dtx(f);
/* if decoder prefers mono signal, force encoder to output mono signal */
if (d->stereo == 0) {
error = opus_encoder_ctl(d->state, OPUS_SET_FORCE_CHANNELS(1));
if (error != OPUS_OK) {
ms_error("could not force mono channel to opus encoder: %s", opus_strerror(error));
}
}
ms_filter_lock(f);
if (d->ptime==-1) { // set ptime wasn't call, set default:20ms
d->ptime = 20;
}
if (d->bitrate==-1) { // set bitrate wasn't call, compute it with the default network bitrate (36000)
compute_max_bitrate(d, 0);
}
apply_max_bitrate(d);
ms_filter_unlock(f);
}
static void enc_preprocess(MSFilter *f){
SpeexEncState *s=(SpeexEncState*)f->data;
const SpeexMode *mode=NULL;
int _mode=0;
switch(s->rate){
case 8000:
_mode = SPEEX_MODEID_NB; /* rate = 8000Hz */
break;
case 16000:
_mode = SPEEX_MODEID_WB; /* rate = 16000Hz */
break;
/* should be supported in the future */
case 32000:
_mode = SPEEX_MODEID_UWB; /* rate = 32000Hz */
break;
default:
ms_error("Unsupported rate for speex encoder (back to default rate=8000).");
s->rate=8000;
}
/* warning: speex_lib_get_mode() is not available on speex<1.1.12 */
mode = speex_lib_get_mode(_mode);
if (mode==NULL)
return;
s->state=speex_encoder_init(mode);
if (s->vbr==1)
{
if (speex_encoder_ctl(s->state,SPEEX_SET_VBR,&s->vbr)!=0){
ms_error("Could not set vbr mode to speex encoder.");
}
/* implicit VAD */
speex_encoder_ctl (s->state, SPEEX_SET_DTX, &s->vbr);
}
else if (s->vbr==2)
{
int vad=1;
/* VAD */
speex_encoder_ctl (s->state, SPEEX_SET_VAD, &vad);
speex_encoder_ctl (s->state, SPEEX_SET_DTX, &vad);
}
else if (s->cng==1)
{
speex_encoder_ctl (s->state, SPEEX_SET_VAD, &s->cng);
}
if (s->rate==8000){
//+------+---------------+-------------+
//| mode | Speex quality | bit-rate |
//+------+---------------+-------------+
//| 1 | 0 | 2.15 kbit/s |
//| 2 | 2 | 5.95 kbit/s |
//| 3 | 3 or 4 | 8.00 kbit/s |
//| 4 | 5 or 6 | 11.0 kbit/s |
//| 5 | 7 or 8 | 15.0 kbit/s |
//| 6 | 9 | 18.2 kbit/s |
//| 7 | 10 | 24.6 kbit/s |
//| 8 | 1 | 3.95 kbit/s |
//+------+---------------+-------------+
if (s->mode<=0 || s->mode>8)
s->mode = 3; /* default mode */
if (s->mode==1)
s->bitrate = 2150;
else if (s->mode==2)
s->bitrate = 5950;
else if (s->mode==3)
s->bitrate = 8000;
else if (s->mode==4)
s->bitrate = 11000;
else if (s->mode==5)
s->bitrate = 15000;
else if (s->mode==6)
s->bitrate = 18200;
else if (s->mode==7)
s->bitrate = 24600;
else if (s->mode==8)
s->bitrate = 3950;
if (s->bitrate!=-1){
if (speex_encoder_ctl(s->state,SPEEX_SET_BITRATE,&s->bitrate)!=0){
ms_error("Could not set bitrate %i to speex encoder.",s->bitrate);
}
}
}
else if (s->rate==16000 || s->rate==32000){
//+------+---------------+-------------------+------------------------+
//| mode | Speex quality | wideband bit-rate | ultra wideband |
//| | | | bit-rate |
//+------+---------------+-------------------+------------------------+
//| 0 | 0 | 3.95 kbit/s | 5.75 kbit/s |
//| 1 | 1 | 5.75 kbit/s | 7.55 kbit/s |
//| 2 | 2 | 7.75 kbit/s | 9.55 kbit/s |
//| 3 | 3 | 9.80 kbit/s | 11.6 kbit/s |
//| 4 | 4 | 12.8 kbit/s | 14.6 kbit/s |
//| 5 | 5 | 16.8 kbit/s | 18.6 kbit/s |
//| 6 | 6 | 20.6 kbit/s | 22.4 kbit/s |
//| 7 | 7 | 23.8 kbit/s | 25.6 kbit/s |
//| 8 | 8 | 27.8 kbit/s | 29.6 kbit/s |
//| 9 | 9 | 34.2 kbit/s | 36.0 kbit/s |
//| 10 | 10 | 42.2 kbit/s | 44.0 kbit/s |
//+------+---------------+-------------------+------------------------+
int q=0;
if (s->mode<0 || s->mode>10)
s->mode = 8; /* default mode */
q=s->mode;
if (speex_encoder_ctl(s->state,SPEEX_SET_QUALITY,&q)!=0){
ms_error("Could not set quality %i to speex encoder.",q);
}
}
apply_max_bitrate(s);
speex_mode_query(mode,SPEEX_MODE_FRAME_SIZE,&s->frame_size);
}
static void ms_opus_enc_preprocess(MSFilter *f) {
int error;
int opusComplexity = -1;
const char *env = NULL;
OpusEncData *d = (OpusEncData *)f->data;
/* create the encoder */
d->state = opus_encoder_create(d->samplerate, d->channels, d->application, &error);
if (error != OPUS_OK) {
ms_error("Opus encoder creation failed: %s", opus_strerror(error));
return;
}
#ifndef MS2_WINDOWS_UNIVERSAL
env = getenv("MS2_OPUS_COMPLEXITY");
#endif
if (env != NULL) {
opusComplexity = atoi(env);
if (opusComplexity < -1)
opusComplexity = -1; /*our default value*/
if (opusComplexity > 10)
opusComplexity = 10;
}
if (opusComplexity == -1){
#if defined(__arm__) || defined(_M_ARM)
int cpucount = ms_factory_get_cpu_count(f->factory);
if (cpucount == 1){
opusComplexity = 0; /* set complexity to 0 for single processor arm devices */
}else if (cpucount == 2) {
opusComplexity = 5;
}
#endif
}
if (opusComplexity != -1){
ms_message("Set Opus complexity to %d", opusComplexity);
opus_encoder_ctl(d->state, OPUS_SET_COMPLEXITY(opusComplexity));
} /*otherwise we let opus with its default value, which is 9*/
error = opus_encoder_ctl(d->state, OPUS_SET_PACKET_LOSS_PERC(10));
if (error != OPUS_OK) {
ms_error("Could not set default loss percentage to opus encoder: %s", opus_strerror(error));
}
/* set the encoder parameters: VBR, IN_BAND_FEC, DTX and bitrate settings */
ms_opus_enc_set_vbr(f);
ms_opus_enc_set_inbandfec(f);
ms_opus_enc_set_dtx(f);
/* if decoder prefers mono signal, force encoder to output mono signal */
if (d->stereo == 0) {
error = opus_encoder_ctl(d->state, OPUS_SET_FORCE_CHANNELS(1));
if (error != OPUS_OK) {
ms_error("could not force mono channel to opus encoder: %s", opus_strerror(error));
}
if (d->channels == 2) ms_message("Opus encoder configured to encode mono despite it is feed with stereo.");
}else if (d->channels == 2){
ms_message("Opus encoder configured to encode stereo.");
}
ms_filter_lock(f);
// set bitrate wasn't call, compute it with the default network bitrate (36000)
if (d->bitrate==-1) {
compute_max_bitrate(d, 0);
}
apply_max_bitrate(d);
ms_filter_unlock(f);
}
