Esempi in C++ (Cpp) per archos_camera_ov7675_init

Esempio n. 1

File: board-archos-a70h2.c Progetto: flyleaf91/Archos_OPENAOS_Kernel_ICS

static void __init board_init(void)
{
	int num_displays = 0;

	init_buffer_pbias();

	omap_board_config = board_config;
	omap_board_config_size = ARRAY_SIZE(board_config);

#ifdef CONFIG_CLOCKS_INIT
	archos_clocks_init(&board_clocks);
#endif
	archos_leds_init();	// set it here mask hugly transitions

	/* before omap_i2c_init() or IRQ will not forwarded to driver */
	if (display_config.nrev > hardware_rev)
		archos_hdmi_gpio_init(&display_config.rev[hardware_rev]);

	msecure_init();
	/* offmode config, before I2C config! */
	board_offmode_config();
	omap_i2c_init();
	/* Fix to prevent VIO leakage on wl127x */
	wl127x_vio_leakage_fix();

#if defined CONFIG_OMAP2_DSS
	if (archos_lcd_panel_init(&board_lcd_device) == 0) {
		board_dss_devices[num_displays++] = &board_lcd_device;
		board_dss_data.default_device = &board_lcd_device;
	}
	board_dss_devices[num_displays++] = &board_hdmi_device;
#ifdef CONFIG_OMAP2_DSS_DUMMY
	board_dss_devices[num_displays++] = &board_dummy_device;
	board_dss_data.default_device = &board_dummy_device;
#endif /* CONFIG_OMAP2_DSS_DUMMY */
	board_dss_data.num_devices = num_displays;
#endif/* CONFIG_OMAP2_DSS */

	platform_add_devices(board_devices, ARRAY_SIZE(board_devices));

	omap_cfg_reg(H20_3430_UART3_RX_IRRX);
	omap_serial_init();

	usb_musb_init();

	archos_usb_ehci_init();

	archos_accel_init(&board_mma7660fc_pdata);

	twl4030_mmc_init(mmc);
	board_vmmc2_supply.dev = mmc[0].dev;
	
	archos_audio_gpio_init();

	archos_usb2sata_init();

	archos_camera_ov7675_init();
	archos_keys_init();
	enable_board_wakeup_source();
}

Esempio n. 2

File: board-archos-a35de.c Progetto: alephzain/archos-gpl-gen8-kernel

static void __init board_init(void)
{
	int num_displays = 0;
	
	omap_board_config = board_config;
	omap_board_config_size = ARRAY_SIZE(board_config);

	msecure_init();
	/* offmode config, before I2C config! */
	board_offmode_config();
	omap_i2c_init();
	
	/* Fix to prevent VIO leakage on wl127x */
	wl127x_vio_leakage_fix();

#if defined CONFIG_OMAP2_DSS
	if (archos_lcd_panel_init(&board_lcd_device) == 0) {
		board_dss_devices[num_displays++] = &board_lcd_device;
		board_dss_data.default_device = &board_lcd_device;
	}
	board_dss_data.num_devices = num_displays;
#endif/* CONFIG_OMAP2_DSS */

	platform_add_devices(board_devices, ARRAY_SIZE(board_devices));

	omap_cfg_reg(H20_3430_UART3_RX_IRRX);
	dcx78_init();
	
	gpio_dc_detect_setup();
	
	omap_serial_init();
	usb_musb_init();

	archos_accel_init(&board_mma7660fc_pdata);

	ads7846_dev_init();

	archos_mmc1_setup_gpios(&mmc[0], &board_vmmc_ext);
	twl4030_mmc_init(mmc);
	board_vmmc_ext_supply.dev = mmc[0].dev;
	board_vmmc2_supply.dev = mmc[1].dev;

	archos_audio_gpio_init();
	archos_camera_ov7675_init();
	archos_leds_init();
	archos_keys_init();
	enable_board_wakeup_source();
}