void
armv7_attach(struct device *parent, struct device *self, void *aux)
{
struct armv7_softc *sc = (struct armv7_softc *)self;
struct board_dev *bd;
sc->sc_board_devs = platform_board_devs();
if (hw_prod)
printf(": %s\n", hw_prod);
else
printf(": UNKNOWN BOARD %u\n", board_id);
/* Directly configure on-board devices (dev* in config file). */
for (bd = sc->sc_board_devs; bd->name != NULL; bd++) {
struct armv7_dev *ad = armv7_find_dev(bd->name, bd->unit);
struct armv7_attach_args aa;
if (ad == NULL) {
printf("%s: device %s unit %d not found\n",
DEVNAME(sc), bd->name, bd->unit);
continue;
}
memset(&aa, 0, sizeof(aa));
aa.aa_dev = ad;
aa.aa_iot = &armv7_bs_tag;
aa.aa_dmat = &armv7_bus_dma_tag;
if (config_found_sm(self, &aa, NULL, armv7_submatch) == NULL)
printf("%s: device %s unit %d not configured\n",
DEVNAME(sc), bd->name, bd->unit);
}
}
void
armv7_attach(struct device *parent, struct device *self, void *aux)
{
struct armv7_softc *sc = (struct armv7_softc *)self;
struct board_dev *bd;
uint32_t issunxi = 0;
bus_space_handle_t ioh;
switch (board_id) {
#if NEXYNOS > 0
case BOARD_ID_EXYNOS5_CHROMEBOOK:
printf(": Exynos 5 Chromebook\n");
exynos5_init();
sc->sc_board_devs = chromebook_devs;
break;
#endif
#if NIMX > 0
case BOARD_ID_IMX6_HUMMINGBOARD:
printf(": SolidRun HummingBoard\n");
imx6_init();
sc->sc_board_devs = hummingboard_devs;
break;
case BOARD_ID_IMX6_SABRELITE:
printf(": i.MX6 SABRE Lite\n");
imx6_init();
sc->sc_board_devs = sabrelite_devs;
break;
case BOARD_ID_IMX6_UDOO:
printf(": i.MX6 UDOO\n");
imx6_init();
sc->sc_board_devs = udoo_devs;
break;
case BOARD_ID_IMX6_UTILITE:
printf(": i.MX6 Utilite\n");
imx6_init();
sc->sc_board_devs = utilite_devs;
break;
case BOARD_ID_IMX6_WANDBOARD:
printf(": i.MX6 Wandboard\n");
imx6_init();
sc->sc_board_devs = wandboard_devs;
break;
#endif
#if NOMAP > 0
case BOARD_ID_OMAP3_BEAGLE:
printf(": BeagleBoard\n");
omap3_init();
sc->sc_board_devs = beagleboard_devs;
break;
case BOARD_ID_AM335X_BEAGLEBONE:
printf(": BeagleBone\n");
am335x_init();
sc->sc_board_devs = beaglebone_devs;
break;
case BOARD_ID_OMAP3_OVERO:
printf(": Gumstix Overo\n");
omap3_init();
sc->sc_board_devs = overo_devs;
break;
case BOARD_ID_OMAP4_PANDA:
printf(": PandaBoard\n");
omap4_init();
sc->sc_board_devs = pandaboard_devs;
break;
#endif
#if NSUNXI > 0
case BOARD_ID_SUN4I_A10:
printf(": A1X\n");
sxia1x_init();
sc->sc_board_devs = sun4i_devs;
issunxi = 1;
break;
case BOARD_ID_SUN7I_A20:
printf(": A20\n");
sxia20_init();
sc->sc_board_devs = sun7i_devs;
issunxi = 1;
break;
#endif
default:
printf("\n");
panic("%s: board type 0x%x unknown", __func__, board_id);
}
if (issunxi) {
/*
* XXX think of a better place to do this, as there might
* be need for access by other drivers later.
*/
if (bus_space_map(&armv7_bs_tag, SYSCTRL_ADDR, SYSCTRL_SIZE, 0,
&ioh))
panic("sunxi_attach: bus_space_map failed!");
/* map the part of SRAM dedicated to EMAC to EMAC */
bus_space_write_4(&armv7_bs_tag, ioh, 4,
bus_space_read_4(&armv7_bs_tag, ioh, 4) | (5 << 2));
}
/* Directly configure on-board devices (dev* in config file). */
for (bd = sc->sc_board_devs; bd->name != NULL; bd++) {
struct armv7_dev *ad = armv7_find_dev(bd->name, bd->unit);
struct armv7_attach_args aa;
if (ad == NULL) {
printf("%s: device %s unit %d not found\n",
DEVNAME(sc), bd->name, bd->unit);
continue;
}
memset(&aa, 0, sizeof(aa));
aa.aa_dev = ad;
aa.aa_iot = &armv7_bs_tag;
aa.aa_dmat = &armv7_bus_dma_tag;
if (config_found_sm(self, &aa, NULL, armv7_submatch) == NULL)
printf("%s: device %s unit %d not configured\n",
DEVNAME(sc), bd->name, bd->unit);
}
}