/**
* Query audio mixer for basic info (name and items count).
* @param[in] exch IPC exchange connected to the device
* @param[out] name Audio mixer string identifier
* @param[out] items Number of items controlled by the mixer.
* @return Error code.
*/
int audio_mixer_get_info(async_exch_t *exch, const char **name, unsigned *items)
{
if (!exch)
return EINVAL;
sysarg_t name_size, itemc;
const int ret = async_req_1_2(exch, DEV_IFACE_ID(AUDIO_MIXER_IFACE),
IPC_M_AUDIO_MIXER_GET_INFO, &name_size, &itemc);
if (ret == EOK && name) {
char *name_place = calloc(1, name_size);
if (!name_place) {
/* Make the other side fail
* as it waits for read request */
async_data_read_start(exch, (void*)-1, 0);
return ENOMEM;
}
const int ret =
async_data_read_start(exch, name_place, name_size);
if (ret != EOK) {
free(name_place);
return ret;
}
*name = name_place;
}
if (ret == EOK && items)
*items = itemc;
return ret;
}
/** Load the frame that issued the wakeup.
*
* The NIC can support only matched_type, only part of the frame
* can be available or not at all. Sometimes even the type can be
* uncertain -- in this case the matched_type contains NIC_WV_NONE.
*
* Frame_length can be greater than max_length, but at most max_length
* bytes will be copied into the frame buffer.
*
* Note: Only the type of the filter can be detected, not the concrete
* filter, because the driver is probably not running when the wakeup
* is issued.
*
* @param[in] dev_sess
* @param[out] matched_type Type of the filter that issued wakeup.
* @param[in] max_length Size of the buffer
* @param[out] frame Buffer for the frame. Can be NULL.
* @param[out] frame_length Length of the stored frame. Can be NULL.
*
* @return EOK If the operation was successfully completed
*
*/
int nic_wol_load_info(async_sess_t *dev_sess, nic_wv_type_t *matched_type,
size_t max_length, uint8_t *frame, size_t *frame_length)
{
assert(matched_type);
sysarg_t _matched_type;
sysarg_t _frame_length;
if (frame == NULL)
max_length = 0;
async_exch_t *exch = async_exchange_begin(dev_sess);
int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_WOL_LOAD_INFO, max_length, &_matched_type, &_frame_length);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
*matched_type = (nic_wv_type_t) _matched_type;
if (frame_length)
*frame_length = (size_t) _frame_length;
if ((max_length != 0) && (_frame_length != 0))
rc = async_data_read_start(exch, frame, max_length);
async_exchange_end(exch);
return rc;
}
static int loc_category_get_ids_once(sysarg_t method, sysarg_t arg1,
sysarg_t *id_buf, size_t buf_size, size_t *act_size)
{
async_exch_t *exch = loc_exchange_begin_blocking(LOC_PORT_CONSUMER);
ipc_call_t answer;
aid_t req = async_send_1(exch, method, arg1, &answer);
int rc = async_data_read_start(exch, id_buf, buf_size);
loc_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return rc;
}
sysarg_t retval;
async_wait_for(req, &retval);
if (retval != EOK) {
return retval;
}
*act_size = IPC_GET_ARG1(answer);
return EOK;
}
/** Get list of IDs into a buffer of fixed size.
*
* @param vbd Virtual Block Device
* @param method IPC method
* @param arg1 First argument
* @param id_buf Buffer to store IDs
* @param buf_size Buffer size
* @param act_size Place to store actual size of complete data.
*
* @return EOK on success or negative error code.
*/
static int vbd_get_ids_once(vbd_t *vbd, sysarg_t method, sysarg_t arg1,
sysarg_t *id_buf, size_t buf_size, size_t *act_size)
{
async_exch_t *exch = async_exchange_begin(vbd->sess);
ipc_call_t answer;
aid_t req = async_send_1(exch, method, arg1, &answer);
int rc = async_data_read_start(exch, id_buf, buf_size);
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return rc;
}
sysarg_t retval;
async_wait_for(req, &retval);
if (retval != EOK) {
return retval;
}
*act_size = IPC_GET_ARG1(answer);
return EOK;
}
/** Retrieve current settings of multicast frames reception.
*
* Note: In case of mode != NIC_MULTICAST_LIST the contents of
* address_list and address_count are undefined.
*
* @param[in] dev_sess
* @param[out] mode Current operation mode
* @param[in] max_count Maximal number of addresses that could
* be written into the list buffer.
* @param[out] address_list Buffer for the list (array). Can be NULL.
* @param[out] address_count Number of addresses in the list before
* possible truncation due to the max_count.
* Can be NULL.
*
* @return EOK If the operation was successfully completed
*
*/
int nic_multicast_get_mode(async_sess_t *dev_sess, nic_multicast_mode_t *mode,
size_t max_count, nic_address_t *address_list, size_t *address_count)
{
assert(mode);
sysarg_t _mode;
if (!address_list)
max_count = 0;
async_exch_t *exch = async_exchange_begin(dev_sess);
sysarg_t ac;
int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_MULTICAST_GET_MODE, max_count, &_mode, &ac);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
*mode = (nic_multicast_mode_t) _mode;
if (address_count)
*address_count = (size_t) ac;
if ((max_count) && (ac))
rc = async_data_read_start(exch, address_list,
max_count * sizeof(nic_address_t));
async_exchange_end(exch);
return rc;
}
/** Retrieve the currently blocked source MAC addresses.
*
* @param[in] dev_sess
* @param[in] max_count Maximal number of addresses that could
* be written into the list buffer.
* @param[out] address_list Buffer for the list (array). Can be NULL.
* @param[out] address_count Number of addresses in the list before
* possible truncation due to the max_count.
*
* @return EOK If the operation was successfully completed
*
*/
int nic_blocked_sources_get(async_sess_t *dev_sess, size_t max_count,
nic_address_t *address_list, size_t *address_count)
{
if (!address_list)
max_count = 0;
async_exch_t *exch = async_exchange_begin(dev_sess);
sysarg_t ac;
int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_BLOCKED_SOURCES_GET, max_count, &ac);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
if (address_count)
*address_count = (size_t) ac;
if ((max_count) && (ac))
rc = async_data_read_start(exch, address_list,
max_count * sizeof(nic_address_t));
async_exchange_end(exch);
return rc;
}
/** Get information about the next received message from UDP service.
*
* @param udp UDP client
* @param rmsg Place to store message information
*
* @return EOK on success or negative error code
*/
static int udp_rmsg_info(udp_t *udp, udp_rmsg_t *rmsg)
{
async_exch_t *exch;
inet_ep_t ep;
ipc_call_t answer;
exch = async_exchange_begin(udp->sess);
aid_t req = async_send_0(exch, UDP_RMSG_INFO, &answer);
int rc = async_data_read_start(exch, &ep, sizeof(inet_ep_t));
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return rc;
}
sysarg_t retval;
async_wait_for(req, &retval);
if (retval != EOK)
return retval;
rmsg->udp = udp;
rmsg->assoc_id = IPC_GET_ARG1(answer);
rmsg->size = IPC_GET_ARG2(answer);
rmsg->remote_ep = ep;
return EOK;
}
/** Get information about virtue.
*
* @param[in] dev_sess
* @param[in] id Virtue identifier
* @param[out] type Type of the filter. Can be NULL.
* @param[out] max_length Size of the data buffer.
* @param[out] data Buffer for data used when the
* virtue was created. Can be NULL.
* @param[out] length Length of the data. Can be NULL.
*
* @return EOK If the operation was successfully completed
*
*/
int nic_wol_virtue_probe(async_sess_t *dev_sess, nic_wv_id_t id,
nic_wv_type_t *type, size_t max_length, void *data, size_t *length)
{
sysarg_t _type;
sysarg_t _length;
if (data == NULL)
max_length = 0;
async_exch_t *exch = async_exchange_begin(dev_sess);
int rc = async_req_3_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_WOL_VIRTUE_PROBE, (sysarg_t) id, max_length,
&_type, &_length);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
if (type)
*type = _type;
if (length)
*length = _length;
if ((max_length) && (_length != 0))
rc = async_data_read_start(exch, data, max_length);
async_exchange_end(exch);
return rc;
}
/** Get a list of all virtues of the specified type.
*
* When NIC_WV_NONE is specified as the virtue type the function
* lists virtues of all types.
*
* @param[in] dev_sess
* @param[in] type Type of the virtues
* @param[in] max_count Maximum number of ids that can be
* written into the list buffer.
* @param[out] id_list Buffer for to the list of virtue ids.
* Can be NULL.
* @param[out] id_count Number of virtue identifiers in the list
* before possible truncation due to the
* max_count. Can be NULL.
*
* @return EOK If the operation was successfully completed
*
*/
int nic_wol_virtue_list(async_sess_t *dev_sess, nic_wv_type_t type,
size_t max_count, nic_wv_id_t *id_list, size_t *id_count)
{
if (id_list == NULL)
max_count = 0;
async_exch_t *exch = async_exchange_begin(dev_sess);
sysarg_t count;
int rc = async_req_3_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_WOL_VIRTUE_LIST, (sysarg_t) type, max_count, &count);
if (id_count)
*id_count = (size_t) count;
if ((rc != EOK) || (!max_count)) {
async_exchange_end(exch);
return rc;
}
rc = async_data_read_start(exch, id_list,
max_count * sizeof(nic_wv_id_t));
async_exchange_end(exch);
return rc;
}
size_t loc_get_services(service_id_t ns_handle, loc_sdesc_t **data)
{
/* Loop until read is succesful */
while (true) {
async_exch_t *exch = loc_exchange_begin_blocking(LOC_PORT_CONSUMER);
size_t count = loc_count_services_internal(exch, ns_handle);
loc_exchange_end(exch);
if (count == 0)
return 0;
loc_sdesc_t *devs = (loc_sdesc_t *) calloc(count, sizeof(loc_sdesc_t));
if (devs == NULL)
return 0;
exch = loc_exchange_begin(LOC_PORT_CONSUMER);
ipc_call_t answer;
aid_t req = async_send_1(exch, LOC_GET_SERVICES, ns_handle, &answer);
int rc = async_data_read_start(exch, devs, count * sizeof(loc_sdesc_t));
loc_exchange_end(exch);
if (rc == EOVERFLOW) {
/*
* Number of services has changed since
* the last call of LOC_GET_SERVICE_COUNT
*/
free(devs);
continue;
}
if (rc != EOK) {
async_forget(req);
free(devs);
return 0;
}
sysarg_t retval;
async_wait_for(req, &retval);
if (retval != EOK)
return 0;
*data = devs;
return count;
}
}
int ahci_get_sata_device_name(async_sess_t *sess, size_t sata_dev_name_length,
char *sata_dev_name)
{
async_exch_t *exch = async_exchange_begin(sess);
if (!exch)
return EINVAL;
aid_t req = async_send_2(exch, DEV_IFACE_ID(AHCI_DEV_IFACE),
IPC_M_AHCI_GET_SATA_DEVICE_NAME, sata_dev_name_length, NULL);
async_data_read_start(exch, sata_dev_name, sata_dev_name_length);
sysarg_t rc;
async_wait_for(req, &rc);
return rc;
}
/** Request current VLAN filtering mask.
*
* @param[in] dev_sess
* @param[out] stats Structure with the statistics
*
* @return EOK If the operation was successfully completed
*
*/
int nic_vlan_get_mask(async_sess_t *dev_sess, nic_vlan_mask_t *mask)
{
assert(mask);
async_exch_t *exch = async_exchange_begin(dev_sess);
int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_VLAN_GET_MASK);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
rc = async_data_read_start(exch, mask, sizeof(nic_vlan_mask_t));
async_exchange_end(exch);
return rc;
}
/** Request the MAC address of the device
*
* @param[in] dev_sess
* @param[out] address Structure with buffer for the address
*
* @return EOK If the operation was successfully completed
*
*/
int nic_get_address(async_sess_t *dev_sess, nic_address_t *address)
{
assert(address);
async_exch_t *exch = async_exchange_begin(dev_sess);
aid_t aid = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_GET_ADDRESS, NULL);
int rc = async_data_read_start(exch, address, sizeof(nic_address_t));
async_exchange_end(exch);
sysarg_t res;
async_wait_for(aid, &res);
if (rc != EOK)
return rc;
return (int) res;
}
/** Request information about the device.
*
* @see nic_device_info_t
*
* @param[in] dev_sess
* @param[out] device_info Information about the device
*
* @return EOK If the operation was successfully completed
*
*/
int nic_get_device_info(async_sess_t *dev_sess, nic_device_info_t *device_info)
{
assert(device_info);
async_exch_t *exch = async_exchange_begin(dev_sess);
int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_GET_DEVICE_INFO);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
rc = async_data_read_start(exch, device_info, sizeof(nic_device_info_t));
async_exchange_end(exch);
return rc;
}
/** Get ID of the new task.
*
* Retrieves the ID of the new task from the loader.
*
* @param ldr Loader connection structure.
* @param task_id Points to a variable where the ID should be stored.
*
* @return Zero on success or negative error code.
*
*/
int loader_get_task_id(loader_t *ldr, task_id_t *task_id)
{
/* Get task ID. */
async_exch_t *exch = async_exchange_begin(ldr->sess);
ipc_call_t answer;
aid_t req = async_send_0(exch, LOADER_GET_TASKID, &answer);
sysarg_t rc = async_data_read_start(exch, task_id, sizeof(task_id_t));
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return (int) rc;
}
async_wait_for(req, &rc);
return (int) rc;
}
/** Request statistic data about NIC operation.
*
* @param[in] dev_sess
* @param[out] stats Structure with the statistics
*
* @return EOK If the operation was successfully completed
*
*/
int nic_get_stats(async_sess_t *dev_sess, nic_device_stats_t *stats)
{
assert(stats);
async_exch_t *exch = async_exchange_begin(dev_sess);
int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_GET_STATS);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
rc = async_data_read_start(exch, stats, sizeof(nic_device_stats_t));
async_exchange_end(exch);
return rc;
}
/** Get scan results from IEEE 802.11 device
*
* @param[in] dev_sess Device session.
* @param[out] results Structure where to put scan results.
*
* @return EOK If the operation was successfully completed,
* negative error code otherwise.
*
*/
int ieee80211_get_scan_results(async_sess_t *dev_sess,
ieee80211_scan_results_t *results, bool now)
{
assert(results);
async_exch_t *exch = async_exchange_begin(dev_sess);
aid_t aid = async_send_2(exch, DEV_IFACE_ID(IEEE80211_DEV_IFACE),
IEEE80211_GET_SCAN_RESULTS, now, NULL);
int rc = async_data_read_start(exch, results,
sizeof(ieee80211_scan_results_t));
async_exchange_end(exch);
sysarg_t res;
async_wait_for(aid, &res);
if(res != EOK)
return (int) res;
return rc;
}
int bd_read_toc(bd_t *bd, uint8_t session, void *buf, size_t size)
{
async_exch_t *exch = async_exchange_begin(bd->sess);
ipc_call_t answer;
aid_t req = async_send_1(exch, BD_READ_TOC, session, &answer);
int rc = async_data_read_start(exch, buf, size);
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return rc;
}
sysarg_t retval;
async_wait_for(req, &retval);
if (retval != EOK)
return retval;
return EOK;
}
/** Get disk information. */
int vbd_disk_info(vbd_t *vbd, service_id_t sid, vbd_disk_info_t *vinfo)
{
async_exch_t *exch;
sysarg_t retval;
ipc_call_t answer;
exch = async_exchange_begin(vbd->sess);
aid_t req = async_send_1(exch, VBD_DISK_INFO, sid, &answer);
int rc = async_data_read_start(exch, vinfo, sizeof(vbd_disk_info_t));
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return EIO;
}
async_wait_for(req, &retval);
if (retval != EOK)
return EIO;
return EOK;
}
int vbd_part_get_info(vbd_t *vbd, vbd_part_id_t part, vbd_part_info_t *pinfo)
{
async_exch_t *exch;
sysarg_t retval;
ipc_call_t answer;
exch = async_exchange_begin(vbd->sess);
aid_t req = async_send_1(exch, VBD_PART_GET_INFO, part, &answer);
int rc = async_data_read_start(exch, pinfo, sizeof(vbd_part_info_t));
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return EIO;
}
async_wait_for(req, &retval);
if (retval != EOK)
return EIO;
return EOK;
}
int win_get_event(async_sess_t *sess, window_event_t *event)
{
async_exch_t *exch = async_exchange_begin(sess);
ipc_call_t answer;
aid_t req = async_send_0(exch, WINDOW_GET_EVENT, &answer);
int rc = async_data_read_start(exch, event, sizeof(window_event_t));
async_exchange_end(exch);
sysarg_t ret;
async_wait_for(req, &ret);
if (rc != EOK) {
return rc;
} else if (ret != EOK) {
return ret;
} else {
return EOK;
}
}
/** Read part of received message.
*
* @param rmsg Received message
* @param off Start offset
* @param buf Buffer for storing data
* @param bsize Buffer size
*
* @return EOK on success or negative error code.
*/
int udp_rmsg_read(udp_rmsg_t *rmsg, size_t off, void *buf, size_t bsize)
{
async_exch_t *exch;
ipc_call_t answer;
exch = async_exchange_begin(rmsg->udp->sess);
aid_t req = async_send_1(exch, UDP_RMSG_READ, off, &answer);
int rc = async_data_read_start(exch, buf, bsize);
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return rc;
}
sysarg_t retval;
async_wait_for(req, &retval);
if (retval != EOK) {
return retval;
}
return EOK;
}
/** Read the current time from the device
*
* @param sess Session of the device
* @param t The current time that will be read from the device
*
* @return EOK on success or a negative error code
*/
int
clock_dev_time_get(async_sess_t *sess, struct tm *t)
{
aid_t req;
int ret;
async_exch_t *exch = async_exchange_begin(sess);
req = async_send_1(exch, DEV_IFACE_ID(CLOCK_DEV_IFACE),
CLOCK_DEV_TIME_GET, NULL);
ret = async_data_read_start(exch, t, sizeof(*t));
async_exchange_end(exch);
sysarg_t rc;
if (ret != EOK) {
async_forget(req);
return ret;
}
async_wait_for(req, &rc);
return (int)rc;
}
int bd_read_blocks(bd_t *bd, aoff64_t ba, size_t cnt, void *data, size_t size)
{
async_exch_t *exch = async_exchange_begin(bd->sess);
ipc_call_t answer;
aid_t req = async_send_3(exch, BD_READ_BLOCKS, LOWER32(ba),
UPPER32(ba), cnt, &answer);
int rc = async_data_read_start(exch, data, size);
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return rc;
}
sysarg_t retval;
async_wait_for(req, &retval);
if (retval != EOK)
return retval;
return EOK;
}
/** Suggest partition type based on partition content.
*
* @param vbd Virtual Block Device
* @param disk Disk on which the partition will be created
* @param pcnt Partition content
* @param ptype Place to store suggested partition type
*
* @return EOK on success or negative error code
*/
int vbd_suggest_ptype(vbd_t *vbd, service_id_t disk, label_pcnt_t pcnt,
label_ptype_t *ptype)
{
async_exch_t *exch;
sysarg_t retval;
ipc_call_t answer;
exch = async_exchange_begin(vbd->sess);
aid_t req = async_send_2(exch, VBD_SUGGEST_PTYPE, disk, pcnt, &answer);
int rc = async_data_read_start(exch, ptype, sizeof(label_ptype_t));
async_exchange_end(exch);
if (rc != EOK) {
async_forget(req);
return EIO;
}
async_wait_for(req, &retval);
if (retval != EOK)
return EIO;
return EOK;
}
/** Read to or write from device.
*
* Helper function to read to or write from a device
* using its character interface.
*
* @param sess Session to the device.
* @param buf Buffer for the data read from or written to the device.
* @param size Maximum size of data (in bytes) to be read or written.
* @param read Read from the device if true, write to it otherwise.
*
* @return Non-negative number of bytes actually read from or
* written to the device on success, negative error number
* otherwise.
*
*/
static ssize_t char_dev_rw(async_sess_t *sess, void *buf, size_t size, bool read)
{
ipc_call_t answer;
aid_t req;
int ret;
async_exch_t *exch = async_exchange_begin(sess);
if (read) {
req = async_send_1(exch, DEV_IFACE_ID(CHAR_DEV_IFACE),
CHAR_DEV_READ, &answer);
ret = async_data_read_start(exch, buf, size);
} else {
req = async_send_1(exch, DEV_IFACE_ID(CHAR_DEV_IFACE),
CHAR_DEV_WRITE, &answer);
ret = async_data_write_start(exch, buf, size);
}
async_exchange_end(exch);
sysarg_t rc;
if (ret != EOK) {
async_wait_for(req, &rc);
if (rc == EOK)
return (ssize_t) ret;
return (ssize_t) rc;
}
async_wait_for(req, &rc);
ret = (int) rc;
if (ret != EOK)
return (ssize_t) ret;
return (ssize_t) IPC_GET_ARG1(answer);
}
/** Query the current interrupt/poll mode of the NIC
*
* @param[in] dev_sess
* @param[out] mode Current poll mode
* @param[out] period Period used in periodic polling.
* Can be NULL.
*
* @return EOK If the operation was successfully completed
*
*/
int nic_poll_get_mode(async_sess_t *dev_sess, nic_poll_mode_t *mode,
struct timeval *period)
{
assert(mode);
sysarg_t _mode;
async_exch_t *exch = async_exchange_begin(dev_sess);
int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE),
NIC_POLL_GET_MODE, period != NULL, &_mode);
if (rc != EOK) {
async_exchange_end(exch);
return rc;
}
*mode = (nic_poll_mode_t) _mode;
if (period != NULL)
rc = async_data_read_start(exch, period, sizeof(struct timeval));
async_exchange_end(exch);
return rc;
}
/**
* Retrieve a list of server side actors.
* @param[in] sess Valid audio session.
* @param[out] ids list of string identifiers.
* @param[out] count Number of elements int the @p ids list.
* @param[in] flags list requirements.
* @param[in] connection name of target actor. Used only if the list should
* contain connected actors.
* @retval Error code.
*/
int hound_service_get_list(hound_sess_t *sess, const char ***ids, size_t *count,
int flags, const char *connection)
{
assert(sess);
assert(ids);
assert(count);
if (connection && !(flags & HOUND_CONNECTED))
return EINVAL;
async_exch_t *exch = async_exchange_begin(sess);
if (!exch)
return ENOMEM;
ipc_call_t res_call;
aid_t mid = async_send_3(exch, IPC_M_HOUND_GET_LIST, flags, *count,
(bool)connection, &res_call);
int ret = EOK;
if (mid && connection)
ret = async_data_write_start(exch, connection,
str_size(connection));
if (ret == EOK)
async_wait_for(mid, (sysarg_t*)&ret);
if (ret != EOK) {
async_exchange_end(exch);
return ret;
}
unsigned name_count = IPC_GET_ARG1(res_call);
/* Start receiving names */
const char **names = NULL;
if (name_count) {
size_t *sizes = calloc(name_count, sizeof(size_t));
names = calloc(name_count, sizeof(char *));
if (!names || !sizes)
ret = ENOMEM;
if (ret == EOK)
ret = async_data_read_start(exch, sizes,
name_count * sizeof(size_t));
for (unsigned i = 0; i < name_count && ret == EOK; ++i) {
char *name = malloc(sizes[i] + 1);
if (name) {
memset(name, 0, sizes[i] + 1);
ret = async_data_read_start(exch, name, sizes[i]);
names[i] = name;
} else {
ret = ENOMEM;
}
}
free(sizes);
}
async_exchange_end(exch);
if (ret != EOK) {
for (unsigned i = 0; i < name_count; ++i)
free(names[i]);
free(names);
} else {
*ids = names;
*count = name_count;
}
return ret;
}
/**
* Read data from a stream.
* @param exch IPC exchange in STREAM MODE.
* @param data Audio data buffer.
* @size size of the buffer
* @return Error code.
*/
int hound_service_stream_read(async_exch_t *exch, void *data, size_t size)
{
return async_data_read_start(exch, data, size);
}
/** Get a copy of clipboard contents.
*
* Returns a new string that can be deallocated with free().
*
* @param str Here pointer to the newly allocated string is stored.
*
* @return Zero on success or negative error code.
*
*/
int clipboard_get_str(char **str)
{
/* Loop until clipboard read succesful */
while (true) {
async_exch_t *exch = clip_exchange_begin();
sysarg_t size;
sysarg_t tag;
sysarg_t rc = async_req_0_2(exch, CLIPBOARD_CONTENT, &size, &tag);
clip_exchange_end(exch);
if (rc != EOK)
return (int) rc;
char *sbuf;
switch (tag) {
case CLIPBOARD_TAG_NONE:
sbuf = malloc(1);
if (sbuf == NULL)
return ENOMEM;
sbuf[0] = 0;
*str = sbuf;
return EOK;
case CLIPBOARD_TAG_DATA:
sbuf = malloc(size + 1);
if (sbuf == NULL)
return ENOMEM;
exch = clip_exchange_begin();
aid_t req = async_send_1(exch, CLIPBOARD_GET_DATA, tag, NULL);
rc = async_data_read_start(exch, (void *) sbuf, size);
clip_exchange_end(exch);
if ((int) rc == EOVERFLOW) {
/*
* The data in the clipboard has changed since
* the last call of CLIPBOARD_CONTENT
*/
break;
}
if (rc != EOK) {
sysarg_t rc_orig;
async_wait_for(req, &rc_orig);
if (rc_orig == EOK)
return (int) rc;
else
return (int) rc_orig;
}
async_wait_for(req, &rc);
if (rc == EOK) {
sbuf[size] = 0;
*str = sbuf;
}
return rc;
default:
return EINVAL;
}
}
}
