static int
at91_udp_attach(device_t dev)
{
struct at91_udp_softc *sc = device_get_softc(dev);
int err;
int rid;
/* setup AT9100 USB device controller interface softc */
sc->sc_dci.sc_clocks_on = &at91_udp_clocks_on;
sc->sc_dci.sc_clocks_off = &at91_udp_clocks_off;
sc->sc_dci.sc_clocks_arg = sc;
sc->sc_dci.sc_pull_up = &at91_udp_pull_up;
sc->sc_dci.sc_pull_down = &at91_udp_pull_down;
sc->sc_dci.sc_pull_arg = sc;
/* initialise some bus fields */
sc->sc_dci.sc_bus.parent = dev;
sc->sc_dci.sc_bus.devices = sc->sc_dci.sc_devices;
sc->sc_dci.sc_bus.devices_max = AT91_MAX_DEVICES;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_dci.sc_bus,
USB_GET_DMA_TAG(dev), NULL)) {
return (ENOMEM);
}
callout_init_mtx(&sc->sc_vbus, &sc->sc_dci.sc_bus.bus_mtx, 0);
/*
* configure VBUS input pin, enable deglitch and enable
* interrupt :
*/
at91_pio_use_gpio(VBUS_BASE, VBUS_MASK);
at91_pio_gpio_input(VBUS_BASE, VBUS_MASK);
at91_pio_gpio_set_deglitch(VBUS_BASE, VBUS_MASK, 1);
at91_pio_gpio_set_interrupt(VBUS_BASE, VBUS_MASK, 0);
/*
* configure PULLUP output pin :
*/
at91_pio_use_gpio(PULLUP_BASE, PULLUP_MASK);
at91_pio_gpio_output(PULLUP_BASE, PULLUP_MASK, 0);
at91_udp_pull_down(sc);
/* wait 10ms for pulldown to stabilise */
usb_pause_mtx(NULL, hz / 100);
sc->sc_mclk = at91_pmc_clock_ref("mck");
sc->sc_iclk = at91_pmc_clock_ref("udc_clk");
sc->sc_fclk = at91_pmc_clock_ref("udpck");
rid = MEM_RID;
sc->sc_dci.sc_io_res =
bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (!(sc->sc_dci.sc_io_res)) {
err = ENOMEM;
goto error;
}
sc->sc_dci.sc_io_tag = rman_get_bustag(sc->sc_dci.sc_io_res);
sc->sc_dci.sc_io_hdl = rman_get_bushandle(sc->sc_dci.sc_io_res);
sc->sc_dci.sc_io_size = rman_get_size(sc->sc_dci.sc_io_res);
rid = 0;
sc->sc_dci.sc_irq_res =
bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
if (!(sc->sc_dci.sc_irq_res)) {
goto error;
}
sc->sc_dci.sc_bus.bdev = device_add_child(dev, "usbus", -1);
if (!(sc->sc_dci.sc_bus.bdev)) {
goto error;
}
device_set_ivars(sc->sc_dci.sc_bus.bdev, &sc->sc_dci.sc_bus);
err = bus_setup_intr(dev, sc->sc_dci.sc_irq_res, INTR_TYPE_TTY | INTR_MPSAFE,
at91dci_filter_interrupt, at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl);
if (err) {
sc->sc_dci.sc_intr_hdl = NULL;
goto error;
}
err = at91dci_init(&sc->sc_dci);
if (!err) {
err = device_probe_and_attach(sc->sc_dci.sc_bus.bdev);
}
if (err) {
goto error;
} else {
/* poll VBUS one time */
USB_BUS_LOCK(&sc->sc_dci.sc_bus);
at91_vbus_poll(sc);
USB_BUS_UNLOCK(&sc->sc_dci.sc_bus);
}
return (0);
error:
at91_udp_detach(dev);
return (ENXIO);
}
static int
at91_udp_detach(device_t dev)
{
struct at91_udp_softc *sc = device_get_softc(dev);
device_t bdev;
int err;
if (sc->sc_dci.sc_bus.bdev) {
bdev = sc->sc_dci.sc_bus.bdev;
device_detach(bdev);
device_delete_child(dev, bdev);
}
/* during module unload there are lots of children leftover */
device_delete_all_children(dev);
/* disable Transceiver */
AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_TXVC, AT91_UDP_TXVC_DIS);
/* disable and clear all interrupts */
AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_IDR, 0xFFFFFFFF);
AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_ICR, 0xFFFFFFFF);
/* disable VBUS interrupt */
at91_pio_gpio_set_interrupt(VBUS_BASE, VBUS_MASK, 0);
if (sc->sc_vbus_irq_res && sc->sc_vbus_intr_hdl) {
err = bus_teardown_intr(dev, sc->sc_vbus_irq_res,
sc->sc_vbus_intr_hdl);
sc->sc_vbus_intr_hdl = NULL;
}
if (sc->sc_vbus_irq_res) {
bus_release_resource(dev, SYS_RES_IRQ, 1,
sc->sc_vbus_irq_res);
sc->sc_vbus_irq_res = NULL;
}
if (sc->sc_dci.sc_irq_res && sc->sc_dci.sc_intr_hdl) {
/*
* only call at91_udp_uninit() after at91_udp_init()
*/
at91dci_uninit(&sc->sc_dci);
err = bus_teardown_intr(dev, sc->sc_dci.sc_irq_res,
sc->sc_dci.sc_intr_hdl);
sc->sc_dci.sc_intr_hdl = NULL;
}
if (sc->sc_dci.sc_irq_res) {
bus_release_resource(dev, SYS_RES_IRQ, 0,
sc->sc_dci.sc_irq_res);
sc->sc_dci.sc_irq_res = NULL;
}
if (sc->sc_dci.sc_io_res) {
bus_release_resource(dev, SYS_RES_MEMORY, MEM_RID,
sc->sc_dci.sc_io_res);
sc->sc_dci.sc_io_res = NULL;
}
usb_bus_mem_free_all(&sc->sc_dci.sc_bus, NULL);
/* disable clocks */
at91_pmc_clock_disable(sc->sc_iclk);
at91_pmc_clock_disable(sc->sc_fclk);
at91_pmc_clock_deref(sc->sc_fclk);
at91_pmc_clock_deref(sc->sc_iclk);
return (0);
}
