Esempi in C++ (Cpp) per at91_set_GPIO_periph

Esempio n. 1

File: at91sam9x5_devices.c Progetto: AubrCool/barebox

void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
{
	struct i2c_gpio_platform_data *pdata;

	i2c_register_board_info(i2c_id, devices, nr_devices);

	switch (i2c_id) {
	case 0:
		pdata = &pdata_i2c0;
		break;
	case 1:
		pdata = &pdata_i2c1;
		break;
	case 2:
		pdata = &pdata_i2c2;
		break;
	default:
		return;
	}

	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
	at91_set_multi_drive(pdata->sda_pin, 1);

	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
	at91_set_multi_drive(pdata->scl_pin, 1);

	add_generic_device_res("i2c-gpio", i2c_id, NULL, 0, pdata);
}

Esempio n. 2

File: board-sam9263ek.c Progetto: Blackburn29/PsycoKernel

static void __init ek_add_device_buttons(void)
{
	at91_set_GPIO_periph(AT91_PIN_PC5, 1);	
	at91_set_deglitch(AT91_PIN_PC5, 1);
	at91_set_GPIO_periph(AT91_PIN_PC4, 1);	
	at91_set_deglitch(AT91_PIN_PC4, 1);

	platform_device_register(&ek_button_device);
}

Esempio n. 3

File: board-neocore926.c Progetto: 0-t/samsung-kernel-msm7x30

static void __init neocore926_add_device_buttons(void)
{
	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
	at91_set_deglitch(AT91_PIN_PC5, 1);
	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
	at91_set_deglitch(AT91_PIN_PC4, 1);

	platform_device_register(&neocore926_button_device);
}

Esempio n. 4

File: at91rm9200_devices.c Progetto: hellolwq/linux-2.6-Note

void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
	at91_set_GPIO_periph(AT91_PIN_PA25, 1);		/* TWD (SDA) */
	at91_set_multi_drive(AT91_PIN_PA25, 1);

	at91_set_GPIO_periph(AT91_PIN_PA26, 1);		/* TWCK (SCL) */
	at91_set_multi_drive(AT91_PIN_PA26, 1);

	i2c_register_board_info(0, devices, nr_devices);
	platform_device_register(&at91rm9200_twi_device);
}

Esempio n. 5

File: at91sam9rl_devices.c Progetto: curbthepain/android_kernel_us990_rev

void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
	at91_set_GPIO_periph(AT91_PIN_PA23, 1);		/*           */
	at91_set_multi_drive(AT91_PIN_PA23, 1);

	at91_set_GPIO_periph(AT91_PIN_PA24, 1);		/*            */
	at91_set_multi_drive(AT91_PIN_PA24, 1);

	i2c_register_board_info(0, devices, nr_devices);
	platform_device_register(&at91sam9rl_twi_device);
}

Esempio n. 6

File: at91sam9261_devices.c Progetto: frantony/barebox

void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
{
	struct i2c_gpio_platform_data *pdata = &pdata_i2c;

	i2c_register_board_info(0, devices, nr_devices);

	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
	at91_set_multi_drive(pdata->sda_pin, 1);

	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
	at91_set_multi_drive(pdata->scl_pin, 1);

	add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
}

Esempio n. 7

File: board-usb-a9g20.c Progetto: davidpristovnik/LUX9

static void __init ek_add_device_buttons(void)
{
	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
	at91_set_deglitch(AT91_PIN_PB10, 1);

	platform_device_register(&ek_button_device);
}

Esempio n. 8

File: init.c Progetto: frantony/barebox

static void __init ek_add_device_button(void)
{
	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
	at91_set_deglitch(AT91_PIN_PB10, 1);

	export_env_ull("dfu_button", AT91_PIN_PB10);
}

Esempio n. 9

File: board-sam9m10g45ek.c Progetto: 22101959/linux-3.8.13

static void __init ek_add_device_buttons(void)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
		at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
		at91_set_deglitch(ek_buttons[i].gpio, 1);
	}

	platform_device_register(&ek_button_device);
}

Esempio n. 10

File: at91sam9g45_devices.c Progetto: chenhaifeng2016/fastsocket

void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
{
    i2c_register_board_info(i2c_id, devices, nr_devices);

    if (i2c_id == 0) {
        at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
        at91_set_multi_drive(AT91_PIN_PA20, 1);

        at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
        at91_set_multi_drive(AT91_PIN_PA21, 1);

        platform_device_register(&at91sam9g45_twi0_device);
    } else {
        at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
        at91_set_multi_drive(AT91_PIN_PB10, 1);

        at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
        at91_set_multi_drive(AT91_PIN_PB11, 1);

        platform_device_register(&at91sam9g45_twi1_device);
    }
}

Esempio n. 11

File: init.c Progetto: SayCV/barebox-at91

static void ek_device_add_keyboard(void)
{
	int i;

	for (i = 0; i < gk_pdata.nbuttons; i++) {
		/* user push button, pull up enabled */
		keys[i].active_low = 1;
		at91_set_GPIO_periph(keys[i].gpio, keys[i].active_low);
		at91_set_deglitch(keys[i].gpio, 1);
	}

	add_gpio_keys_device(DEVICE_ID_DYNAMIC, &gk_pdata);
}

Esempio n. 12

File: init.c Progetto: caicry/mini2440-barebox

static void usb_a9260_keyboard_device_dab_mmx(void)
{
	int i;

	for (i = 0; i < gk_pdata.nbuttons; i++) {
		/* user push button, pull up enabled */
		keys[i].active_low = 1;
		at91_set_GPIO_periph(keys[i].gpio, keys[i].active_low);
		at91_set_deglitch(keys[i].gpio, 1);
	}

	add_gpio_keys_device(-1, &gk_pdata);
}

Esempio n. 13

File: board-stamp9g20.c Progetto: curbthepain/android_kernel_us990_rev

void add_w1(void)
{
	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
	platform_device_register(&w1_device);
}