/**
* \b test_start
*
* Start mutex test.
*
* This tests timeouts on a mutex. We make a thread block with timeout
* on a mutex, and test that sufficient time has actually passed as
* was requested by the timeout parameter.
*
* The main thread creates a second thread which will immediately take
* ownership of the mutex. The test checks that the correct timeout
* occurs when the first thread blocks on the mutex which is already
* owned (by the second thread).
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
uint32_t start_time, end_time;
/* Default to zero failures */
failures = 0;
/* Create mutex */
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating mutex\n"));
failures++;
}
else
{
/* Initialise the shared_data to zero */
shared_data = 0;
/* Create second thread */
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[0][0],
TEST_THREAD_STACK_SIZE, TRUE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/*
* The second thread has now been created and should take ownership
* of the mutex. We wait a while and check that shared_data has been
* modified, which proves to us that the thread has taken the mutex.
*/
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
if (shared_data != 1)
{
ATOMLOG (_STR("Shared data unmodified\n"));
failures++;
}
/* Check successful so far */
if (failures == 0)
{
/* Take note of the start time */
start_time = atomTimeGet();
/* Block on the mutex with two second timeout */
if (atomMutexGet (&mutex1, 2 * SYSTEM_TICKS_PER_SEC) != ATOM_TIMEOUT)
{
ATOMLOG (_STR("Failed get\n"));
failures++;
}
/* Take note of the end time */
end_time = atomTimeGet();
/* Now check that two seconds have passed */
if ((end_time < (start_time + (2 * SYSTEM_TICKS_PER_SEC)))
|| (end_time > (start_time + (2 * SYSTEM_TICKS_PER_SEC) + 1)))
{
ATOMLOG (_STR("Bad time\n"));
failures++;
}
}
/* Delete mutex, test finished */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start mutex test.
*
* Stress-tests mutex Get and Put operations. Four threads are created which are
* continually Getting and Putting the same mutex, with no time delays between
* each Get/Put.
*
* @retval Number of g_failures
*/
uint32_t test_start (void)
{
CRITICAL_STORE;
int finish_cnt;
/* Default to zero g_failures */
g_failures = 0;
/* Create mutex to stress */
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating mutex\n"));
g_failures++;
}
/* Create sem to receive thread-finished notification */
else if (atomSemCreate (&sem1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error creating sem\n"));
g_failures++;
}
else
{
/* Take ownership of the mutex to ensure all threads wait for now */
if (atomMutexGet (&mutex1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error taking mutex\n"));
g_failures++;
}
/* Create Thread 1 */
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Create Thread 2 */
if (atomThreadCreate(&tcb[1], TEST_THREAD_PRIO, test_thread_func, 2,
&test_thread_stack[1][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Create Thread 3 */
if (atomThreadCreate(&tcb[2], TEST_THREAD_PRIO, test_thread_func, 3,
&test_thread_stack[2][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Create Thread 4 */
if (atomThreadCreate(&tcb[3], TEST_THREAD_PRIO, test_thread_func, 4,
&test_thread_stack[3][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Release ownership of the mutex to kick the threads off */
if (atomMutexPut (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error putting mutex\n"));
g_failures++;
}
/*
* All four threads will now be performing Gets/Puts on mutex1.
* When they have finished they will post sem1, so we wait
* until sem1 is posted four times.
*/
finish_cnt = 0;
while (1)
{
/*
* Attempt to Get sem1. When we have managed to get
* the semaphore four times, it must have been posted
* by all four threads.
*/
if (atomSemGet (&sem1, 0) == ATOM_OK)
{
/* Increment our count of finished threads */
finish_cnt++;
/* Check if all four threads have now posted sem1 */
if (finish_cnt == 4)
{
break;
}
}
}
/* Delete OS objects, test finished */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
if (atomSemDelete (&sem1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
g_failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
g_failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return g_failures;
}
/**
* \b test_start
*
* Start mutex test.
*
* This test exercises the atomMutexGet() and atomMutexPut() APIs including
* forcing the various error indications which can be returned from the
* APIs to ensure that handling for these corner cases have been correctly
* implemented.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
uint8_t status;
ATOM_TIMER timer_cb;
int count;
/* Default to zero failures */
failures = 0;
/* Test parameter checks */
if (atomMutexGet (NULL, 0) != ATOM_ERR_PARAM)
{
ATOMLOG (_STR("Get param failed\n"));
failures++;
}
if (atomMutexPut (NULL) != ATOM_ERR_PARAM)
{
ATOMLOG (_STR("Put param failed\n"));
failures++;
}
/* Test atomMutexGet() can not be called from interrupt context */
g_result = 0;
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test mutex1\n"));
failures++;
}
else
{
/* Fill out the timer callback request structure */
timer_cb.cb_func = testCallback;
timer_cb.cb_data = NULL;
timer_cb.cb_ticks = SYSTEM_TICKS_PER_SEC;
/* Request the timer callback to run in one second */
if (atomTimerRegister (&timer_cb) != ATOM_OK)
{
ATOMLOG (_STR("Error registering timer\n"));
failures++;
}
/* Wait two seconds for g_result to be set indicating success */
else
{
atomTimerDelay (2 * SYSTEM_TICKS_PER_SEC);
if (g_result != 1)
{
ATOMLOG (_STR("Context check failed\n"));
failures++;
}
}
/* Delete the test mutex */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Mutex1 delete failed\n"));
failures++;
}
}
/* Create mutex1 which will be owned by us */
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test mutex 1\n"));
failures++;
}
/* Create mutex2 which will be owned by another thread */
else if (atomMutexCreate (&mutex2) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test mutex 2\n"));
failures++;
}
/* Create a test thread, the sole purpose of which is to own mutex2 */
g_owned = 0;
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 0,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread 1\n"));
failures++;
}
/* Sleep until the test thread owns mutex2 */
atomTimerDelay (SYSTEM_TICKS_PER_SEC);
if (g_owned == 0)
{
ATOMLOG (_STR("Thread own fail\n"));
failures++;
}
/* Test wait on mutex with timeout - should timeout while owned by another thread */
if ((status = atomMutexGet (&mutex2, SYSTEM_TICKS_PER_SEC)) != ATOM_TIMEOUT)
{
ATOMLOG (_STR("Get %d\n"), status);
failures++;
}
else
{
/* Success */
}
/* Test wait on mutex with no blocking - should return that owned by another thread */
if ((status = atomMutexGet (&mutex2, -1)) != ATOM_WOULDBLOCK)
{
ATOMLOG (_STR("Wouldblock err %d\n"), status);
failures++;
}
/* Test wait on mutex with no blocking when mutex is available */
if (atomMutexGet (&mutex1, -1) != ATOM_OK)
{
ATOMLOG (_STR("Error taking mutex1\n"));
failures++;
}
else
{
/* Relinquish ownership of mutex1 */
if (atomMutexPut (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error posting mutex\n"));
failures++;
}
}
/* Test for lock count overflows with too many gets */
count = 255;
while (count--)
{
if (atomMutexGet (&mutex1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error getting mutex1\n"));
failures++;
break;
}
}
/* The lock count should overflow this time */
if (atomMutexGet (&mutex1, 0) != ATOM_ERR_OVF)
{
ATOMLOG (_STR("Error tracking overflow\n"));
failures++;
}
else
{
/* Success */
}
/* Delete the test mutexes */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error deleting mutex1\n"));
failures++;
}
if (atomMutexDelete (&mutex2) != ATOM_OK)
{
ATOMLOG (_STR("Error deleting mutex2\n"));
failures++;
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start mutex test.
*
* This tests the lock count of a mutex. The mutex object should
* count the number of times a thread has locked the mutex and
* not fully release it for use by another thread until it has
* been released the same number of times it was locked.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
int i;
/* Default to zero failures */
failures = 0;
/* Create mutex */
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating mutex\n"));
failures++;
}
else
{
/* Initialise the shared_data to zero */
shared_data = 0;
/* Take the mutex several times */
for (i = 0; i < TEST_LOCK_CNT; i++)
{
if (atomMutexGet (&mutex1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error taking mutex\n"));
failures++;
break;
}
}
/* Create second thread */
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[0][0],
TEST_THREAD_STACK_SIZE, TRUE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/*
* The second thread has now been created and should block on
* the mutex until we release it. We wait a while and check that
* shared_data has not been modified.
*/
for (i = 0; i < 4; i++)
{
/*
* Sleep for a while to give the second thread a chance to
* modify shared_data, thought it shouldn't until we
* release the mutex enough times.
*/
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Check shared data. The second thread always sets it to one. */
if (shared_data != 0)
{
ATOMLOG (_STR("Shared data modified\n"));
failures++;
break;
}
}
/* Check successful so far */
if (failures == 0)
{
/*
* Release the mutex TEST_LOCK_CNT-1 times, after which we
* should still own the mutex (until we release one more time).
*/
for (i = 0; i < TEST_LOCK_CNT-1; i++)
{
if (atomMutexPut (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Failed release\n"));
failures++;
}
}
/*
* Wait a little while then check that shared_data has
* not been modified (we should still own the mutex).
*/
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
if (shared_data != 0)
{
ATOMLOG (_STR("Expected unmodified\n"));
failures++;
}
/*
* Release the mutex one more time, after which we should no
* longer own the mutex (and wake up the second thread).
*/
if (atomMutexPut (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Failed release\n"));
failures++;
}
/*
* Wait a little while then check that shared_data has
* been modified by the second thread.
*/
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
if (shared_data != 1)
{
ATOMLOG (_STR("Expected modified\n"));
failures++;
}
}
/*
* Finally attempt to release the mutex one more time, while
* we no longer own the mutex. Either the second thread will
* have ownership of it, or no thread will have ownership.
* In both cases we expect to get an ownership error when we
* attempt to release it.
*/
if (atomMutexPut (&mutex1) != ATOM_ERR_OWNERSHIP)
{
ATOMLOG (_STR("Failed locked+1 release\n"));
failures++;
}
/* Delete mutex, test finished */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start mutex test.
*
* This tests the ownership checks of the mutex library. Only threads
* which own a mutex can release it. It should not be possible to
* release a mutex if it is not owned by any thread, is owned by a
* different thread, or at interrupt context. We test here that all
* three cases are trapped.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
ATOM_TIMER timer_cb;
/* Default to zero failures */
failures = 0;
/* Create mutex */
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating mutex\n"));
failures++;
}
else
{
/* Initialise the shared_data to zero */
shared_data = 0;
/* Attempt to release the mutex when not owned by any thread */
if (atomMutexPut (&mutex1) != ATOM_ERR_OWNERSHIP)
{
ATOMLOG (_STR("Release error\n"));
failures++;
}
/* Create second thread */
else if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/*
* The second thread has now been created and should take ownership
* of the mutex. We wait a while and check that shared_data has been
* modified, which proves to us that the thread has taken the mutex.
*/
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
if (shared_data != 1)
{
ATOMLOG (_STR("Shared data unmodified\n"));
failures++;
}
/* Check successful so far */
if (failures == 0)
{
/*
* Attempt to release the mutex again now that it is owned
* by another thread.
*/
if (atomMutexPut (&mutex1) != ATOM_ERR_OWNERSHIP)
{
ATOMLOG (_STR("Release error 2\n"));
failures++;
}
/* Finally check that the mutex cannot be released from an ISR */
/* Fill out the timer callback request structure */
timer_cb.cb_func = testCallback;
timer_cb.cb_data = NULL;
timer_cb.cb_ticks = SYSTEM_TICKS_PER_SEC;
/* Request the timer callback to run in one second */
if (atomTimerRegister (&timer_cb) != ATOM_OK)
{
ATOMLOG (_STR("Error registering timer\n"));
failures++;
}
/*
* Wait two seconds for shared_date to be set to 2
* indicating success. This happens if the timer
* callback received the expected ownership error
* when attempting to release the mutex.
*/
else
{
atomTimerDelay (2 * SYSTEM_TICKS_PER_SEC);
if (shared_data != 2)
{
ATOMLOG (_STR("Context check failed\n"));
failures++;
}
}
}
/* Delete mutex, test finished */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start mutex test.
*
* With multiple threads blocking on a single mutex, this test confirms that
* they are woken in order when the mutex is released. The correct order for
* waking is that the higher priority threads are woken first, followed by the
* lower priority threads. Where multiple threads of the same priority are
* waiting, the threads are woken in FIFO order (the order in which they started
* waiting on the mutex).
*
* To test this we create four threads which all wait on a single mutex.
* One pair of threads are running at high priority, with the other pair at a
* lower priority:
*
* Thread 1: low prio thread A
* Thread 2: low prio thread B
* Thread 3: high prio thread A
* Thread 4: high prio thread B
*
* The threads are forced to start blocking on the same mutex in the
* above order.
*
* We expect to see them woken up in the following order:
* 3, 4, 1, 2
*
* This proves the multiple blocking thread ordering in terms of both
* the priority-queueing and same-priority-FIFO-queueing.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
/* Default to zero failures */
failures = 0;
/* Create mutex */
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test mutex 1\n"));
failures++;
}
/* Take ownership of the mutex so all threads will block to begin with */
else if (atomMutexGet (&mutex1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Get error\n"));
failures++;
}
/* Start the threads */
else
{
/* Create Thread 1 (lower priority thread A) */
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO+1, test_thread_func, 1,
&test_thread_stack[0][0],
TEST_THREAD_STACK_SIZE, TRUE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the mutex */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Create Thread 2 (lower priority thread B) */
if (atomThreadCreate(&tcb[1], TEST_THREAD_PRIO+1, test_thread_func, 2,
&test_thread_stack[1][0],
TEST_THREAD_STACK_SIZE, TRUE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the mutex */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Create Thread 3 (higher priority thread A) */
if (atomThreadCreate(&tcb[2], TEST_THREAD_PRIO, test_thread_func, 3,
&test_thread_stack[2][0],
TEST_THREAD_STACK_SIZE, TRUE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the mutex */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Create Thread 4 (higher priority thread B) */
if (atomThreadCreate(&tcb[3], TEST_THREAD_PRIO, test_thread_func, 4,
&test_thread_stack[3][0],
TEST_THREAD_STACK_SIZE, TRUE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the mutex */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* All four threads will now be blocking on mutex1 */
/*
* Initialise wake count, used by threads to determine
* what order they were woken in.
*/
wake_cnt = 0;
/*
* Release the mutex. This will wake up one of the threads blocking
* on it. That thread will take ownership of the mutex, and note the
* order at which it was woken, before releasing the mutex. This in
* turn will wake up the next thread blocking on the mutex until all
* four test threads have taken and released the mutex, noting their
* wake order.
*/
if (atomMutexPut (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Post fail\n"));
failures++;
}
/* Sleep to give all four threads time to complete */
atomTimerDelay (SYSTEM_TICKS_PER_SEC / 4);
/* All four threads now woken up, check they woke in correct order */
if ((wake_order[0] != 3) && (wake_order[1] != 4)
&& (wake_order[2] != 1) && (wake_order[3] != 2))
{
ATOMLOG (_STR("Bad order %d,%d,%d,%d\n"),
wake_order[0], wake_order[1], wake_order[2], wake_order[3]);
failures++;
}
/* Delete mutex, test finished */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}