void GfxPaint16::kernelGraphUpdateBox(const Common::Rect &rect, bool hiresMode) {
// some calls are hiresMode even under kq6 DOS, that's why we check for
// upscaled hires here
if ((!hiresMode) || (!_screen->getUpscaledHires()))
bitsShow(rect);
else
bitsShowHires(rect);
}
// This one is the only one that updates screen!
void GfxPaint16::drawCelAndShow(GuiResourceId viewId, int16 loopNo, int16 celNo, uint16 leftPos, uint16 topPos, byte priority, uint16 paletteNo, uint16 scaleX, uint16 scaleY) {
GfxView *view = _cache->getView(viewId);
Common::Rect celRect;
if (view) {
celRect.left = leftPos;
celRect.top = topPos;
celRect.right = celRect.left + view->getWidth(loopNo, celNo);
celRect.bottom = celRect.top + view->getHeight(loopNo, celNo);
drawCel(view, loopNo, celNo, celRect, priority, paletteNo, scaleX, scaleY);
if (getSciVersion() >= SCI_VERSION_1_1) {
if (!_screen->_picNotValidSci11) {
bitsShow(celRect);
}
} else {
if (!_screen->_picNotValid)
bitsShow(celRect);
}
}
}
reg_t GfxPaint16::kernelDisplay(const char *text, int argc, reg_t *argv) {
reg_t displayArg;
TextAlignment alignment = SCI_TEXT16_ALIGNMENT_LEFT;
int16 colorPen = -1, colorBack = -1, width = -1, bRedraw = 1;
bool doSaveUnder = false;
Common::Rect rect;
reg_t result = NULL_REG;
// Make a "backup" of the port settings (required for some SCI0LATE and
// SCI01+ only)
Port oldPort = *_ports->getPort();
// setting defaults
_ports->penMode(0);
_ports->penColor(0);
_ports->textGreyedOutput(false);
// processing codes in argv
while (argc > 0) {
displayArg = argv[0];
if (displayArg.segment)
displayArg.offset = 0xFFFF;
argc--; argv++;
switch (displayArg.offset) {
case SCI_DISPLAY_MOVEPEN:
_ports->moveTo(argv[0].toUint16(), argv[1].toUint16());
argc -= 2; argv += 2;
break;
case SCI_DISPLAY_SETALIGNMENT:
alignment = argv[0].toSint16();
argc--; argv++;
break;
case SCI_DISPLAY_SETPENCOLOR:
colorPen = argv[0].toUint16();
_ports->penColor(colorPen);
argc--; argv++;
break;
case SCI_DISPLAY_SETBACKGROUNDCOLOR:
colorBack = argv[0].toUint16();
argc--; argv++;
break;
case SCI_DISPLAY_SETGREYEDOUTPUT:
_ports->textGreyedOutput(argv[0].isNull() ? false : true);
argc--; argv++;
break;
case SCI_DISPLAY_SETFONT:
_text16->SetFont(argv[0].toUint16());
argc--; argv++;
break;
case SCI_DISPLAY_WIDTH:
width = argv[0].toUint16();
argc--; argv++;
break;
case SCI_DISPLAY_SAVEUNDER:
doSaveUnder = true;
break;
case SCI_DISPLAY_RESTOREUNDER:
bitsGetRect(argv[0], &rect);
rect.translate(-_ports->getPort()->left, -_ports->getPort()->top);
if (g_sci->getGameId() == GID_PQ3 && g_sci->getEngineState()->currentRoomNumber() == 29) {
// WORKAROUND: PQ3 calls this without calling the associated
// kDisplay(SCI_DISPLAY_SAVEUNDER) call before. Theoretically,
// this would result in no rect getting restored. However, we
// still maintain a pointer from the previous room, resulting
// in invalidated content being restored on screen, and causing
// graphics glitches. Thus, we simply don't restore a rect in
// that room. The correct fix for this would be to erase hunk
// pointers when changing rooms, but this will suffice for now,
// as restoring from a totally invalid pointer is very rare.
// Fixes bug #3037945.
} else {
bitsRestore(argv[0]);
}
kernelGraphRedrawBox(rect);
// finishing loop
argc = 0;
break;
case SCI_DISPLAY_DONTSHOWBITS:
bRedraw = 0;
break;
// 2 Dummy functions, longbow-demo is using those several times but sierra sci doesn't support them at all
// The Quest for Glory 1 EGA demo also calls kDisplay(114)
case SCI_DISPLAY_DUMMY1:
case SCI_DISPLAY_DUMMY2:
if (!g_sci->isDemo() || (g_sci->getGameId() != GID_LONGBOW && g_sci->getGameId() != GID_QFG1))
error("Unknown kDisplay argument %d", displayArg.offset);
if (displayArg.offset == SCI_DISPLAY_DUMMY2) {
if (argc) {
argc--; argv++;
} else {
error("No parameter left for kDisplay(115)");
}
}
break;
default:
SciTrackOriginReply originReply;
SciWorkaroundSolution solution = trackOriginAndFindWorkaround(0, kDisplay_workarounds, &originReply);
if (solution.type == WORKAROUND_NONE)
error("Unknown kDisplay argument (%04x:%04x) from method %s::%s (script %d, localCall %x)", PRINT_REG(displayArg), originReply.objectName.c_str(), originReply.methodName.c_str(), originReply.scriptNr, originReply.localCallOffset);
assert(solution.type == WORKAROUND_IGNORE);
break;
}
}
// now drawing the text
_text16->Size(rect, text, -1, width);
rect.moveTo(_ports->getPort()->curLeft, _ports->getPort()->curTop);
if (getSciVersion() >= SCI_VERSION_1_LATE) {
int16 leftPos = rect.right <= _screen->getWidth() ? 0 : _screen->getWidth() - rect.right;
int16 topPos = rect.bottom <= _screen->getHeight() ? 0 : _screen->getHeight() - rect.bottom;
_ports->move(leftPos, topPos);
rect.moveTo(_ports->getPort()->curLeft, _ports->getPort()->curTop);
}
if (doSaveUnder)
result = bitsSave(rect, GFX_SCREEN_MASK_VISUAL);
if (colorBack != -1)
fillRect(rect, GFX_SCREEN_MASK_VISUAL, colorBack, 0, 0);
_text16->Box(text, false, rect, alignment, -1);
if (_screen->_picNotValid == 0 && bRedraw)
bitsShow(rect);
// restoring port and cursor pos
Port *currport = _ports->getPort();
uint16 tTop = currport->curTop;
uint16 tLeft = currport->curLeft;
if (!g_sci->_features->usesOldGfxFunctions()) {
// Restore port settings for some SCI0LATE and SCI01+ only.
//
// The change actually happened inbetween .530 (hoyle1) and .566 (heros
// quest). We don't have any detection for that currently, so we are
// using oldGfxFunctions (.502). The only games that could get
// regressions because of this are hoyle1, kq4 and funseeker. If there
// are regressions, we should use interpreter version (which would
// require exe version detection).
//
// If we restore the port for whole SCI0LATE, at least sq3old will get
// an issue - font 0 will get used when scanning for planets instead of
// font 600 - a setfont parameter is missing in one of the kDisplay
// calls in script 19. I assume this is a script bug, because it was
// added in sq3new.
*currport = oldPort;
}
currport->curTop = tTop;
currport->curLeft = tLeft;
return result;
}
void Portrait::doit(Common::Point position, uint16 resourceId, uint16 noun, uint16 verb, uint16 cond, uint16 seq) {
_position = position;
// Now init audio and sync resource
uint32 audioNumber = ((noun & 0xff) << 24) | ((verb & 0xff) << 16) | ((cond & 0xff) << 8) | (seq & 0xff);
#ifndef DEBUG_PORTRAIT_USE_SYNC_RESOURCES
ResourceId raveResourceId = ResourceId(kResourceTypeRave, resourceId, noun, verb, cond, seq);
Resource *raveResource = _resMan->findResource(raveResourceId, true);
uint raveOffset = 0;
#else
ResourceId syncResourceId = ResourceId(kResourceTypeSync36, resourceId, noun, verb, cond, seq);
Resource *syncResource = _resMan->findResource(syncResourceId, true);
uint syncOffset = 0;
#endif
#ifdef DEBUG_PORTRAIT
// prints out the current lip sync ASCII data
char debugPrint[4000];
if (raveResource->size < 4000) {
memcpy(debugPrint, raveResource->data, raveResource->size);
debugPrint[raveResource->size] = 0; // set terminating NUL
debug("kPortrait: using actor %s", _resourceName.c_str());
debug("kPortrait (noun %d, verb %d, cond %d, seq %d)", noun, verb, cond, seq);
debug("kPortrait: rave data is '%s'", debugPrint);
}
#endif
// TODO: maybe try to create the missing sync resources for low-res KQ6 out of the rave resources
#ifdef DEBUG_PORTRAIT_USE_SYNC_RESOURCES
// Dump the sync resources to disk
Common::DumpFile *outFile = new Common::DumpFile();
Common::String outName = syncResourceId.toPatchNameBase36() + ".sync36";
outFile->open(outName);
syncResource->writeToStream(outFile);
outFile->finalize();
outFile->close();
ResourceId raveResourceId = ResourceId(kResourceTypeRave, resourceId, noun, verb, cond, seq);
Resource *raveResource = _resMan->findResource(raveResourceId, true);
outName = raveResourceId.toPatchNameBase36() + ".rave";
outFile->open(outName);
raveResource->writeToStream(outFile);
outFile->finalize();
outFile->close();
_resMan->unlockResource(raveResource);
delete outFile;
#endif
// Set the portrait palette
_palette->set(&_portraitPalette, false, true);
// Draw base bitmap
drawBitmap(0);
bitsShow();
// Start playing audio...
_audio->stopAudio();
_audio->startAudio(resourceId, audioNumber);
#ifndef DEBUG_PORTRAIT_USE_SYNC_RESOURCES
if (!raveResource) {
warning("kPortrait: no rave resource %d %X", resourceId, audioNumber);
return;
}
// Do animation depending on rave resource till audio is done playing
int16 raveTicks;
uint16 raveID;
byte *raveLipSyncData;
byte raveLipSyncTicks;
byte raveLipSyncBitmapNr;
int timerPosition = 0;
int timerPositionWithin = 0;
int curPosition;
SciEvent curEvent;
bool userAbort = false;
while ((raveOffset < raveResource->size) && (!userAbort)) {
// rave string starts with tick count, followed by lipSyncID, tick count and so on
raveTicks = raveGetTicks(raveResource, &raveOffset);
if (raveTicks < 0)
break;
// get lipSyncID
raveID = raveGetID(raveResource, &raveOffset);
if (raveID) {
raveLipSyncData = raveGetLipSyncData(raveID);
} else {
raveLipSyncData = NULL;
}
#ifdef DEBUG_PORTRAIT
if (raveID & 0x0ff) {
debug("kPortrait: rave '%c%c' after %d ticks", raveID >> 8, raveID & 0x0ff, raveTicks);
} else if (raveID) {
reg_t GfxPaint16::kernelDisplay(const char *text, int argc, reg_t *argv) {
reg_t displayArg;
TextAlignment alignment = SCI_TEXT16_ALIGNMENT_LEFT;
int16 colorPen = -1, colorBack = -1, width = -1, bRedraw = 1;
bool doSaveUnder = false;
Common::Rect rect;
reg_t result = NULL_REG;
// Make a "backup" of the port settings (required for some SCI0LATE and
// SCI01+ only)
Port oldPort = *_ports->getPort();
// setting defaults
_ports->penMode(0);
_ports->penColor(0);
_ports->textGreyedOutput(false);
// processing codes in argv
while (argc > 0) {
displayArg = argv[0];
if (displayArg.getSegment())
displayArg.setOffset(0xFFFF);
argc--; argv++;
switch (displayArg.getOffset()) {
case SCI_DISPLAY_MOVEPEN:
_ports->moveTo(argv[0].toUint16(), argv[1].toUint16());
argc -= 2; argv += 2;
break;
case SCI_DISPLAY_SETALIGNMENT:
alignment = argv[0].toSint16();
argc--; argv++;
break;
case SCI_DISPLAY_SETPENCOLOR:
colorPen = argv[0].toUint16();
_ports->penColor(colorPen);
argc--; argv++;
break;
case SCI_DISPLAY_SETBACKGROUNDCOLOR:
colorBack = argv[0].toUint16();
argc--; argv++;
break;
case SCI_DISPLAY_SETGREYEDOUTPUT:
_ports->textGreyedOutput(!argv[0].isNull());
argc--; argv++;
break;
case SCI_DISPLAY_SETFONT:
_text16->SetFont(argv[0].toUint16());
argc--; argv++;
break;
case SCI_DISPLAY_WIDTH:
width = argv[0].toUint16();
argc--; argv++;
break;
case SCI_DISPLAY_SAVEUNDER:
doSaveUnder = true;
break;
case SCI_DISPLAY_RESTOREUNDER:
bitsGetRect(argv[0], &rect);
rect.translate(-_ports->getPort()->left, -_ports->getPort()->top);
bitsRestore(argv[0]);
kernelGraphRedrawBox(rect);
// finishing loop
argc = 0;
break;
case SCI_DISPLAY_DONTSHOWBITS:
bRedraw = 0;
break;
// The following three dummy calls are not supported by the Sierra SCI
// interpreter, but are erroneously called in some game scripts.
case SCI_DISPLAY_DUMMY1: // Longbow demo (all rooms) and QFG1 EGA demo (room 11)
case SCI_DISPLAY_DUMMY2: // Longbow demo (all rooms)
case SCI_DISPLAY_DUMMY3: // QFG1 EGA demo (room 11) and PQ2 (room 23)
if (!(g_sci->getGameId() == GID_LONGBOW && g_sci->isDemo()) &&
!(g_sci->getGameId() == GID_QFG1 && g_sci->isDemo()) &&
!(g_sci->getGameId() == GID_PQ2))
error("Unknown kDisplay argument %d", displayArg.getOffset());
if (displayArg.getOffset() == SCI_DISPLAY_DUMMY2) {
if (!argc)
error("No parameter left for kDisplay(115)");
argc--; argv++;
}
break;
default:
SciTrackOriginReply originReply;
SciWorkaroundSolution solution = trackOriginAndFindWorkaround(0, kDisplay_workarounds, &originReply);
if (solution.type == WORKAROUND_NONE)
error("Unknown kDisplay argument (%04x:%04x) from method %s::%s (script %d, localCall %x)",
PRINT_REG(displayArg), originReply.objectName.c_str(), originReply.methodName.c_str(),
originReply.scriptNr, originReply.localCallOffset);
assert(solution.type == WORKAROUND_IGNORE);
break;
}
}
//20140521 Text Exchange
std::map<std::string, std::string>::iterator iter;
if(g_sci->_ScriptData)
{
_ShouterInfo* pInfo = g_sci->_ScriptData->GetShouterInfo();
iter = pInfo->SentenceList.find(text);
if(iter == pInfo->SentenceList.end())
_text16->Size(rect, text, -1, width);
else
_text16->Size(rect, iter->second.c_str(), -1, width);
}
else
{
// now drawing the text
_text16->Size(rect, text, -1, width);
}
//End
rect.moveTo(_ports->getPort()->curLeft, _ports->getPort()->curTop);
// Note: This code has been found in SCI1 middle and newer games. It was
// previously only for SCI1 late and newer, but the LSL1 interpreter contains
// this code.
if (getSciVersion() >= SCI_VERSION_1_MIDDLE) {
int16 leftPos = rect.right <= _screen->getWidth() ? 0 : _screen->getWidth() - rect.right;
int16 topPos = rect.bottom <= _screen->getHeight() ? 0 : _screen->getHeight() - rect.bottom;
_ports->move(leftPos, topPos);
rect.moveTo(_ports->getPort()->curLeft, _ports->getPort()->curTop);
}
if (doSaveUnder)
result = bitsSave(rect, GFX_SCREEN_MASK_VISUAL);
if (colorBack != -1)
fillRect(rect, GFX_SCREEN_MASK_VISUAL, colorBack, 0, 0);
//20140521
if(g_sci->_ScriptData)
{
if(iter == g_sci->_ScriptData->GetShouterInfo()->SentenceList.end())
_text16->Box(text, false, rect, alignment, -1, false);
else
_text16->Box(iter->second.c_str(), false, rect, alignment, -1);
}
else
{
_text16->Box(text, false, rect, alignment, -1);
}
//End
if (_screen->_picNotValid == 0 && bRedraw)
bitsShow(rect);
// restoring port and cursor pos
Port *currport = _ports->getPort();
uint16 tTop = currport->curTop;
uint16 tLeft = currport->curLeft;
if (!g_sci->_features->usesOldGfxFunctions()) {
// Restore port settings for some SCI0LATE and SCI01+ only.
//
// The change actually happened inbetween .530 (hoyle1) and .566 (heros
// quest). We don't have any detection for that currently, so we are
// using oldGfxFunctions (.502). The only games that could get
// regressions because of this are hoyle1, kq4 and funseeker. If there
// are regressions, we should use interpreter version (which would
// require exe version detection).
//
// If we restore the port for whole SCI0LATE, at least sq3old will get
// an issue - font 0 will get used when scanning for planets instead of
// font 600 - a setfont parameter is missing in one of the kDisplay
// calls in script 19. I assume this is a script bug, because it was
// added in sq3new.
*currport = oldPort;
}
currport->curTop = tTop;
currport->curLeft = tLeft;
return result;
}
void Portrait::doit(Common::Point position, uint16 resourceId, uint16 noun, uint16 verb, uint16 cond, uint16 seq) {
_position = position;
// Now init audio and sync resource
uint32 audioNumber = ((noun & 0xff) << 24) | ((verb & 0xff) << 16) | ((cond & 0xff) << 8) | (seq & 0xff);
ResourceId syncResourceId = ResourceId(kResourceTypeSync36, resourceId, noun, verb, cond, seq);
Resource *syncResource = _resMan->findResource(syncResourceId, true);
uint syncOffset = 0;
// Set the portrait palette
_palette->set(&_portraitPalette, false, true);
// Draw base bitmap
drawBitmap(0);
bitsShow();
// Start playing audio...
_audio->stopAudio();
_audio->startAudio(resourceId, audioNumber);
if (!syncResource) {
// Getting the book in the book shop calls kPortrait where no sync exists
// TODO: find out what to do then
warning("kPortrait: no sync resource %d %X", resourceId, audioNumber);
return;
}
// Do animation depending on sync resource till audio is done playing
uint16 syncCue;
int timerPosition, curPosition;
SciEvent curEvent;
bool userAbort = false;
while ((syncOffset < syncResource->size - 2) && (!userAbort)) {
timerPosition = (int16)READ_LE_UINT16(syncResource->data + syncOffset);
syncOffset += 2;
if (syncOffset < syncResource->size - 2) {
syncCue = READ_LE_UINT16(syncResource->data + syncOffset);
syncOffset += 2;
} else {
syncCue = 0xFFFF;
}
// Wait till syncTime passed, then show specific animation bitmap
do {
g_sci->getEngineState()->wait(1);
curEvent = _event->getSciEvent(SCI_EVENT_ANY);
if (curEvent.type == SCI_EVENT_MOUSE_PRESS ||
(curEvent.type == SCI_EVENT_KEYBOARD && curEvent.data == SCI_KEY_ESC) ||
g_sci->getEngineState()->abortScriptProcessing == kAbortQuitGame)
userAbort = true;
curPosition = _audio->getAudioPosition();
} while ((curPosition != -1) && (curPosition < timerPosition) && (!userAbort));
if (syncCue != 0xFFFF) {
// Display animation bitmap
if (syncCue < _bitmapCount) {
if (syncCue)
drawBitmap(0); // Draw base bitmap first to get valid animation frame
drawBitmap(syncCue);
bitsShow();
} else {
warning("kPortrait: sync information tried to draw non-existant %d", syncCue);
}
}
}
if (userAbort) {
// Reset the portrait bitmap to "closed mouth" state, when skipping dialogs
drawBitmap(0);
bitsShow();
_audio->stopAudio();
}
_resMan->unlockResource(syncResource);
}
