void libblis_test_trmv_experiment( test_params_t* params,
test_op_t* op,
mt_impl_t impl,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid )
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = 1e9;
double time;
dim_t m;
uplo_t uploa;
trans_t transa;
diag_t diaga;
obj_t kappa;
obj_t alpha, a, x;
obj_t x_save;
// Map the dimension specifier to an actual dimension.
m = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_uplo( pc_str[0], &uploa );
bli_param_map_char_to_blis_trans( pc_str[1], &transa );
bli_param_map_char_to_blis_diag( pc_str[2], &diaga );
// Create test scalars.
bli_obj_init_scalar( datatype, &alpha );
bli_obj_init_scalar( datatype, &kappa );
// Create test operands (vectors and/or matrices).
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[0], m, m, &a );
libblis_test_vobj_create( params, datatype,
sc_str[1], m, &x );
libblis_test_vobj_create( params, datatype,
sc_str[1], m, &x_save );
// Set alpha.
if ( bli_obj_is_real( x ) )
bli_setsc( -1.0, 0.0, &alpha );
else
bli_setsc( 0.0, -1.0, &alpha );
// Set the structure and uplo properties of A.
bli_obj_set_struc( BLIS_TRIANGULAR, a );
bli_obj_set_uplo( uploa, a );
// Randomize A, make it densely triangular.
bli_randm( &a );
bli_mktrim( &a );
// Randomize x and save.
bli_randv( &x );
bli_copyv( &x, &x_save );
// Normalize vectors by m.
bli_setsc( 1.0/( double )m, 0.0, &kappa );
bli_scalv( &kappa, &x );
bli_scalv( &kappa, &x_save );
// Apply the remaining parameters.
bli_obj_set_conjtrans( transa, a );
bli_obj_set_diag( diaga, a );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &x_save, &x );
time = bli_clock();
libblis_test_trmv_impl( impl, &alpha, &a, &x );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 1.0 * m * m ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( x ) ) *perf *= 4.0;
// Perform checks.
libblis_test_trmv_check( &alpha, &a, &x, &x_save, resid );
// Zero out performance and residual if output vector is empty.
libblis_test_check_empty_problem( &x, perf, resid );
// Free the test objects.
bli_obj_free( &a );
bli_obj_free( &x );
bli_obj_free( &x_save );
}
void libblis_test_symv_experiment
(
test_params_t* params,
test_op_t* op,
iface_t iface,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid
)
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = DBL_MAX;
double time;
dim_t m;
uplo_t uploa;
conj_t conja;
conj_t conjx;
obj_t alpha, a, x, beta, y;
obj_t y_save;
// Map the dimension specifier to an actual dimension.
m = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_uplo( pc_str[0], &uploa );
bli_param_map_char_to_blis_conj( pc_str[1], &conja );
bli_param_map_char_to_blis_conj( pc_str[2], &conjx );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &alpha );
bli_obj_scalar_init_detached( datatype, &beta );
// Create test operands (vectors and/or matrices).
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[0], m, m, &a );
libblis_test_vobj_create( params, datatype,
sc_str[1], m, &x );
libblis_test_vobj_create( params, datatype,
sc_str[2], m, &y );
libblis_test_vobj_create( params, datatype,
sc_str[2], m, &y_save );
// Set alpha and beta.
if ( bli_obj_is_real( &y ) )
{
bli_setsc( 1.0, 0.0, &alpha );
bli_setsc( -1.0, 0.0, &beta );
}
else
{
bli_setsc( 0.5, 0.5, &alpha );
bli_setsc( -0.5, 0.5, &beta );
}
// Set the structure and uplo properties of A.
bli_obj_set_struc( BLIS_SYMMETRIC, &a );
bli_obj_set_uplo( uploa, &a );
// Randomize A, make it densely symmetric, and zero the unstored triangle
// to ensure the implementation reads only from the stored region.
libblis_test_mobj_randomize( params, TRUE, &a );
bli_mksymm( &a );
bli_mktrim( &a );
// Randomize x and y, and save y.
libblis_test_vobj_randomize( params, TRUE, &x );
libblis_test_vobj_randomize( params, TRUE, &y );
bli_copyv( &y, &y_save );
// Apply the remaining parameters.
bli_obj_set_conj( conja, &a );
bli_obj_set_conj( conjx, &x );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &y_save, &y );
time = bli_clock();
libblis_test_symv_impl( iface, &alpha, &a, &x, &beta, &y );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 1.0 * m * m ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( &y ) ) *perf *= 4.0;
// Perform checks.
libblis_test_symv_check( params, &alpha, &a, &x, &beta, &y, &y_save, resid );
// Zero out performance and residual if output vector is empty.
libblis_test_check_empty_problem( &y, perf, resid );
// Free the test objects.
bli_obj_free( &a );
bli_obj_free( &x );
bli_obj_free( &y );
bli_obj_free( &y_save );
}
void libblis_test_trsm_experiment
(
test_params_t* params,
test_op_t* op,
iface_t iface,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid
)
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = 1e9;
double time;
dim_t m, n;
dim_t mn_side;
side_t side;
uplo_t uploa;
trans_t transa;
diag_t diaga;
obj_t alpha, a, b;
obj_t b_save;
// Map the dimension specifier to actual dimensions.
m = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
n = libblis_test_get_dim_from_prob_size( op->dim_spec[1], p_cur );
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_side( pc_str[0], &side );
bli_param_map_char_to_blis_uplo( pc_str[1], &uploa );
bli_param_map_char_to_blis_trans( pc_str[2], &transa );
bli_param_map_char_to_blis_diag( pc_str[3], &diaga );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &alpha );
// Create test operands (vectors and/or matrices).
bli_set_dim_with_side( side, m, n, mn_side );
libblis_test_mobj_create( params, datatype, transa,
sc_str[0], mn_side, mn_side, &a );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[1], m, n, &b );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[1], m, n, &b_save );
// Set alpha.
if ( bli_obj_is_real( b ) )
{
bli_setsc( 2.0, 0.0, &alpha );
}
else
{
bli_setsc( 2.0, 0.0, &alpha );
}
// Set the structure and uplo properties of A.
bli_obj_set_struc( BLIS_TRIANGULAR, a );
bli_obj_set_uplo( uploa, a );
// Randomize A, load the diagonal, make it densely triangular.
libblis_test_mobj_randomize( params, TRUE, &a );
libblis_test_mobj_load_diag( params, &a );
bli_mktrim( &a );
// Randomize B and save B.
libblis_test_mobj_randomize( params, TRUE, &b );
bli_copym( &b, &b_save );
// Apply the remaining parameters.
bli_obj_set_conjtrans( transa, a );
bli_obj_set_diag( diaga, a );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &b_save, &b );
time = bli_clock();
libblis_test_trsm_impl( iface, side, &alpha, &a, &b );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 1.0 * mn_side * m * n ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( b ) ) *perf *= 4.0;
// Perform checks.
libblis_test_trsm_check( params, side, &alpha, &a, &b, &b_save, resid );
// Zero out performance and residual if output matrix is empty.
libblis_test_check_empty_problem( &b, perf, resid );
// Free the test objects.
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &b_save );
}
void libblis_test_gemmtrsm_ukr_experiment( test_params_t* params,
test_op_t* op,
mt_impl_t impl,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid )
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = 1e9;
double time;
dim_t m, n, k;
char sc_a = 'c';
char sc_b = 'r';
side_t side = BLIS_LEFT;
uplo_t uploa;
obj_t kappa;
obj_t alpha;
obj_t a_big, a, b;
obj_t b11, c11;
obj_t ap, bp;
obj_t a1xp, a11p, bx1p, b11p;
obj_t c11_save;
// Map the dimension specifier to actual dimensions.
k = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
// Fix m and n to MR and NR, respectively.
m = bli_blksz_for_type( datatype, gemm_mr );
n = bli_blksz_for_type( datatype, gemm_nr );
// Store the register blocksizes so that the driver can retrieve the
// values later when printing results.
op->dim_aux[0] = m;
op->dim_aux[1] = n;
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_uplo( pc_str[0], &uploa );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &kappa );
bli_obj_scalar_init_detached( datatype, &alpha );
// Create test operands (vectors and/or matrices).
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_a, k+m, k+m, &a_big );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_b, k+m, n, &b );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[0], m, n, &c11 );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[0], m, n, &c11_save );
// Set alpha.
if ( bli_obj_is_real( b ) )
{
bli_setsc( 2.0, 0.0, &alpha );
}
else
{
bli_setsc( 2.0, 0.0, &alpha );
}
// Set the structure, uplo, and diagonal offset properties of A.
bli_obj_set_struc( BLIS_TRIANGULAR, a_big );
bli_obj_set_uplo( uploa, a_big );
// Randomize A and make it densely triangular.
bli_randm( &a_big );
// Normalize B and save.
bli_randm( &b );
bli_setsc( 1.0/( double )m, 0.0, &kappa );
bli_scalm( &kappa, &b );
// Use the last m rows of A_big as A.
bli_acquire_mpart_t2b( BLIS_SUBPART1, k, m, &a_big, &a );
// Locate the B11 block of B, copy to C11, and save.
if ( bli_obj_is_lower( a ) )
bli_acquire_mpart_t2b( BLIS_SUBPART1, k, m, &b, &b11 );
else
bli_acquire_mpart_t2b( BLIS_SUBPART1, 0, m, &b, &b11 );
bli_copym( &b11, &c11 );
bli_copym( &c11, &c11_save );
// Initialize pack objects.
bli_obj_init_pack( &ap );
bli_obj_init_pack( &bp );
// Create pack objects for a and b.
libblis_test_pobj_create( gemm_mr,
gemm_mr,
BLIS_INVERT_DIAG,
BLIS_PACKED_ROW_PANELS,
BLIS_BUFFER_FOR_A_BLOCK,
&a, &ap );
libblis_test_pobj_create( gemm_mr,
gemm_nr,
BLIS_NO_INVERT_DIAG,
BLIS_PACKED_COL_PANELS,
BLIS_BUFFER_FOR_B_PANEL,
&b, &bp );
// Pack the contents of a to ap.
bli_packm_blk_var3( &a, &ap );
// Pack the contents of b to bp.
bli_packm_blk_var2( &b, &bp );
// Create subpartitions from the a and b panels.
bli_gemmtrsm_ukr_make_subparts( k, &ap, &bp,
&a1xp, &a11p, &bx1p, &b11p );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &c11_save, &c11 );
// Re-pack the contents of b to bp.
bli_packm_blk_var2( &b, &bp );
time = bli_clock();
libblis_test_gemmtrsm_ukr_impl( impl, side, &alpha,
&a1xp, &a11p, &bx1p, &b11p, &c11 );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 2.0 * m * n * k + 1.0 * m * m * n ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( b ) ) *perf *= 4.0;
// Perform checks.
libblis_test_gemmtrsm_ukr_check( side, &alpha,
&a1xp, &a11p, &bx1p, &b11p, &c11, &c11_save, resid );
// Zero out performance and residual if output matrix is empty.
//libblis_test_check_empty_problem( &c11, perf, resid );
// Release packing buffers within pack objects.
bli_obj_release_pack( &ap );
bli_obj_release_pack( &bp );
// Free the test objects.
bli_obj_free( &a_big );
bli_obj_free( &b );
bli_obj_free( &c11 );
bli_obj_free( &c11_save );
}
void libblis_test_her2k_experiment
(
test_params_t* params,
test_op_t* op,
iface_t iface,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid
)
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = DBL_MAX;
double time;
dim_t m, k;
uplo_t uploc;
trans_t transa, transb;
obj_t alpha, a, b, beta, c;
obj_t c_save;
// Map the dimension specifier to actual dimensions.
m = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
k = libblis_test_get_dim_from_prob_size( op->dim_spec[1], p_cur );
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_uplo( pc_str[0], &uploc );
bli_param_map_char_to_blis_trans( pc_str[1], &transa );
bli_param_map_char_to_blis_trans( pc_str[2], &transb );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &alpha );
bli_obj_scalar_init_detached( datatype, &beta );
// Create test operands (vectors and/or matrices).
libblis_test_mobj_create( params, datatype, transa,
sc_str[0], m, k, &a );
libblis_test_mobj_create( params, datatype, transb,
sc_str[1], m, k, &b );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[2], m, m, &c );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[2], m, m, &c_save );
// Set alpha and beta.
if ( bli_obj_is_real( c ) )
{
bli_setsc( 0.8, 0.0, &alpha );
bli_setsc( -1.0, 0.0, &beta );
}
else
{
// For her2k, alpha may be complex, but beta must be real-valued
// (in order to preserve the Hermitian structure of C).
bli_setsc( 0.8, 0.5, &alpha );
bli_setsc( -1.0, 0.0, &beta );
}
// Randomize A and B.
libblis_test_mobj_randomize( params, TRUE, &a );
libblis_test_mobj_randomize( params, TRUE, &b );
// Set the structure and uplo properties of C.
bli_obj_set_struc( BLIS_HERMITIAN, c );
bli_obj_set_uplo( uploc, c );
// Randomize A, make it densely Hermitian, and zero the unstored triangle
// to ensure the implementation is reads only from the stored region.
libblis_test_mobj_randomize( params, TRUE, &c );
bli_mkherm( &c );
bli_mktrim( &c );
// Save C and set its structure and uplo properties.
bli_obj_set_struc( BLIS_HERMITIAN, c_save );
bli_obj_set_uplo( uploc, c_save );
bli_copym( &c, &c_save );
// Apply the remaining parameters.
bli_obj_set_conjtrans( transa, a );
bli_obj_set_conjtrans( transb, b );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &c_save, &c );
time = bli_clock();
libblis_test_her2k_impl( iface, &alpha, &a, &b, &beta, &c );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 2.0 * m * m * k ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( c ) ) *perf *= 4.0;
// Perform checks.
libblis_test_her2k_check( params, &alpha, &a, &b, &beta, &c, &c_save, resid );
// Zero out performance and residual if output matrix is empty.
libblis_test_check_empty_problem( &c, perf, resid );
// Free the test objects.
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
void libblis_test_her_experiment( test_params_t* params,
test_op_t* op,
iface_t iface,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid )
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = 1e9;
double time;
dim_t m;
uplo_t uploa;
conj_t conjx;
obj_t alpha, x, a;
obj_t a_save;
// Map the dimension specifier to an actual dimension.
m = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_uplo( pc_str[0], &uploa );
bli_param_map_char_to_blis_conj( pc_str[1], &conjx );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &alpha );
// Create test operands (vectors and/or matrices).
libblis_test_vobj_create( params, datatype,
sc_str[0], m, &x );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[1], m, m, &a );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[1], m, m, &a_save );
// Set alpha.
//bli_copysc( &BLIS_MINUS_ONE, &alpha );
bli_setsc( -1.0, 0.0, &alpha );
// Randomize x.
bli_randv( &x );
// Set the structure and uplo properties of A.
bli_obj_set_struc( BLIS_HERMITIAN, a );
bli_obj_set_uplo( uploa, a );
// Randomize A, make it densely Hermitian, and zero the unstored triangle
// to ensure the implementation is reads only from the stored region.
bli_randm( &a );
bli_mkherm( &a );
bli_mktrim( &a );
// Save A and set its structure and uplo properties.
bli_obj_set_struc( BLIS_HERMITIAN, a_save );
bli_obj_set_uplo( uploa, a_save );
bli_copym( &a, &a_save );
// Apply the remaining parameters.
bli_obj_set_conj( conjx, x );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &a_save, &a );
time = bli_clock();
libblis_test_her_impl( iface, &alpha, &x, &a );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 1.0 * m * m ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( a ) ) *perf *= 4.0;
// Perform checks.
libblis_test_her_check( &alpha, &x, &a, &a_save, resid );
// Zero out performance and residual if output matrix is empty.
libblis_test_check_empty_problem( &a, perf, resid );
// Free the test objects.
bli_obj_free( &x );
bli_obj_free( &a );
bli_obj_free( &a_save );
}
void libblis_test_syrk_experiment( test_params_t* params,
test_op_t* op,
mt_impl_t impl,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid )
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = 1e9;
double time;
dim_t m, k;
uplo_t uploc;
trans_t transa;
obj_t kappa;
obj_t alpha, a, beta, c;
obj_t c_save;
// Map the dimension specifier to actual dimensions.
m = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
k = libblis_test_get_dim_from_prob_size( op->dim_spec[1], p_cur );
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_uplo( pc_str[0], &uploc );
bli_param_map_char_to_blis_trans( pc_str[1], &transa );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &kappa );
bli_obj_scalar_init_detached( datatype, &alpha );
bli_obj_scalar_init_detached( datatype, &beta );
// Create test operands (vectors and/or matrices).
libblis_test_mobj_create( params, datatype, transa,
sc_str[0], m, k, &a );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[1], m, m, &c );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[1], m, m, &c_save );
// Set alpha and beta.
if ( bli_obj_is_real( c ) )
{
bli_setsc( 1.2, 0.0, &alpha );
bli_setsc( -1.0, 0.0, &beta );
}
else
{
// For syrk, both alpha and beta may be complex since, unlike herk,
// C is symmetric in both the real and complex cases.
bli_setsc( 1.2, 0.5, &alpha );
bli_setsc( -1.0, 0.5, &beta );
}
// Randomize A.
bli_randm( &a );
// Set the structure and uplo properties of C.
bli_obj_set_struc( BLIS_SYMMETRIC, c );
bli_obj_set_uplo( uploc, c );
// Randomize A, make it densely symmetric, and zero the unstored triangle
// to ensure the implementation is reads only from the stored region.
bli_randm( &c );
bli_mksymm( &c );
bli_mktrim( &c );
// Save C and set its structure and uplo properties.
bli_obj_set_struc( BLIS_SYMMETRIC, c_save );
bli_obj_set_uplo( uploc, c_save );
bli_copym( &c, &c_save );
// Normalize by k.
bli_setsc( 1.0/( double )k, 0.0, &kappa );
bli_scalm( &kappa, &a );
// Apply the remaining parameters.
bli_obj_set_conjtrans( transa, a );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &c_save, &c );
time = bli_clock();
libblis_test_syrk_impl( impl, &alpha, &a, &beta, &c );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 1.0 * m * m * k ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( c ) ) *perf *= 4.0;
// Perform checks.
libblis_test_syrk_check( &alpha, &a, &beta, &c, &c_save, resid );
// Zero out performance and residual if output matrix is empty.
libblis_test_check_empty_problem( &c, perf, resid );
// Free the test objects.
bli_obj_free( &a );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
void libblis_test_hemm_experiment( test_params_t* params,
test_op_t* op,
iface_t iface,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid )
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = 1e9;
double time;
dim_t m, n;
dim_t mn_side;
side_t side;
uplo_t uploa;
conj_t conja;
trans_t transb;
obj_t kappa;
obj_t alpha, a, b, beta, c;
obj_t c_save;
// Map the dimension specifier to actual dimensions.
m = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
n = libblis_test_get_dim_from_prob_size( op->dim_spec[1], p_cur );
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_side( pc_str[0], &side );
bli_param_map_char_to_blis_uplo( pc_str[1], &uploa );
bli_param_map_char_to_blis_conj( pc_str[2], &conja );
bli_param_map_char_to_blis_trans( pc_str[3], &transb );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &kappa );
bli_obj_scalar_init_detached( datatype, &alpha );
bli_obj_scalar_init_detached( datatype, &beta );
// Create test operands (vectors and/or matrices).
bli_set_dim_with_side( side, m, n, mn_side );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[0], mn_side, mn_side, &a );
libblis_test_mobj_create( params, datatype, transb,
sc_str[1], m, n, &b );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[2], m, n, &c );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[2], m, n, &c_save );
// Set alpha and beta.
if ( bli_obj_is_real( c ) )
{
bli_setsc( 1.2, 0.0, &alpha );
bli_setsc( -1.0, 0.0, &beta );
}
else
{
bli_setsc( 1.2, 0.8, &alpha );
bli_setsc( -1.0, 1.0, &beta );
}
// Set the structure and uplo properties of A.
bli_obj_set_struc( BLIS_HERMITIAN, a );
bli_obj_set_uplo( uploa, a );
// Randomize A, make it densely Hermitian, and zero the unstored triangle
// to ensure the implementation reads only from the stored region.
bli_randm( &a );
bli_mkherm( &a );
bli_mktrim( &a );
// Randomize B and C, and save C.
bli_randm( &b );
bli_randm( &c );
bli_copym( &c, &c_save );
// Normalize by m.
bli_setsc( 1.0/( double )m, 0.0, &kappa );
bli_scalm( &kappa, &b );
// Apply the remaining parameters.
bli_obj_set_conj( conja, a );
bli_obj_set_conjtrans( transb, b );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &c_save, &c );
time = bli_clock();
libblis_test_hemm_impl( iface, side, &alpha, &a, &b, &beta, &c );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 2.0 * mn_side * m * n ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( c ) ) *perf *= 4.0;
// Perform checks.
libblis_test_hemm_check( side, &alpha, &a, &b, &beta, &c, &c_save, resid );
// Zero out performance and residual if output matrix is empty.
libblis_test_check_empty_problem( &c, perf, resid );
// Free the test objects.
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
