void bli_thread_get_range_sub
(
thrinfo_t* thread,
dim_t n,
dim_t bf,
bool_t handle_edge_low,
dim_t* start,
dim_t* end
)
{
dim_t n_way = bli_thread_n_way( thread );
dim_t work_id = bli_thread_work_id( thread );
dim_t all_start = 0;
dim_t all_end = n;
dim_t size = all_end - all_start;
dim_t n_bf_whole = size / bf;
dim_t n_bf_left = size % bf;
dim_t n_bf_lo = n_bf_whole / n_way;
dim_t n_bf_hi = n_bf_whole / n_way;
// In this function, we partition the space between all_start and
// all_end into n_way partitions, each a multiple of block_factor
// with the exception of the one partition that recieves the
// "edge" case (if applicable).
//
// Here are examples of various thread partitionings, in units of
// the block_factor, when n_way = 4. (A '+' indicates the thread
// that receives the leftover edge case (ie: n_bf_left extra
// rows/columns in its sub-range).
// (all_start ... all_end)
// n_bf_whole _left hel n_th_lo _hi thr0 thr1 thr2 thr3
// 12 =0 f 0 4 3 3 3 3
// 12 >0 f 0 4 3 3 3 3+
// 13 >0 f 1 3 4 3 3 3+
// 14 >0 f 2 2 4 4 3 3+
// 15 >0 f 3 1 4 4 4 3+
// 15 =0 f 3 1 4 4 4 3
//
// 12 =0 t 4 0 3 3 3 3
// 12 >0 t 4 0 3+ 3 3 3
// 13 >0 t 3 1 3+ 3 3 4
// 14 >0 t 2 2 3+ 3 4 4
// 15 >0 t 1 3 3+ 4 4 4
// 15 =0 t 1 3 3 4 4 4
// As indicated by the table above, load is balanced as equally
// as possible, even in the presence of an edge case.
// First, we must differentiate between cases where the leftover
// "edge" case (n_bf_left) should be allocated to a thread partition
// at the low end of the index range or the high end.
if ( handle_edge_low == FALSE )
{
// Notice that if all threads receive the same number of
// block_factors, those threads are considered "high" and
// the "low" thread group is empty.
dim_t n_th_lo = n_bf_whole % n_way;
//dim_t n_th_hi = n_way - n_th_lo;
// If some partitions must have more block_factors than others
// assign the slightly larger partitions to lower index threads.
if ( n_th_lo != 0 ) n_bf_lo += 1;
// Compute the actual widths (in units of rows/columns) of
// individual threads in the low and high groups.
dim_t size_lo = n_bf_lo * bf;
dim_t size_hi = n_bf_hi * bf;
// Precompute the starting indices of the low and high groups.
dim_t lo_start = all_start;
dim_t hi_start = all_start + n_th_lo * size_lo;
// Compute the start and end of individual threads' ranges
// as a function of their work_ids and also the group to which
// they belong (low or high).
if ( work_id < n_th_lo )
{
*start = lo_start + (work_id ) * size_lo;
*end = lo_start + (work_id+1) * size_lo;
}
else // if ( n_th_lo <= work_id )
{
*start = hi_start + (work_id-n_th_lo ) * size_hi;
*end = hi_start + (work_id-n_th_lo+1) * size_hi;
// Since the edge case is being allocated to the high
// end of the index range, we have to advance the last
// thread's end.
if ( work_id == n_way - 1 ) *end += n_bf_left;
}
}
else // if ( handle_edge_low == TRUE )
{
// Notice that if all threads receive the same number of
// block_factors, those threads are considered "low" and
// the "high" thread group is empty.
dim_t n_th_hi = n_bf_whole % n_way;
dim_t n_th_lo = n_way - n_th_hi;
// If some partitions must have more block_factors than others
// assign the slightly larger partitions to higher index threads.
if ( n_th_hi != 0 ) n_bf_hi += 1;
// Compute the actual widths (in units of rows/columns) of
// individual threads in the low and high groups.
dim_t size_lo = n_bf_lo * bf;
dim_t size_hi = n_bf_hi * bf;
// Precompute the starting indices of the low and high groups.
dim_t lo_start = all_start;
dim_t hi_start = all_start + n_th_lo * size_lo
+ n_bf_left;
// Compute the start and end of individual threads' ranges
// as a function of their work_ids and also the group to which
// they belong (low or high).
if ( work_id < n_th_lo )
{
*start = lo_start + (work_id ) * size_lo;
*end = lo_start + (work_id+1) * size_lo;
// Since the edge case is being allocated to the low
// end of the index range, we have to advance the
// starts/ends accordingly.
if ( work_id == 0 ) *end += n_bf_left;
else { *start += n_bf_left;
*end += n_bf_left; }
}
else // if ( n_th_lo <= work_id )
{
*start = hi_start + (work_id-n_th_lo ) * size_hi;
*end = hi_start + (work_id-n_th_lo+1) * size_hi;
}
}
}
void bli_l3_thrinfo_print_paths
(
thrinfo_t** threads
)
{
dim_t n_threads = bli_thread_num_threads( threads[0] );
dim_t gl_comm_id;
thrinfo_t* jc_info = threads[0];
thrinfo_t* pc_info = bli_thrinfo_sub_node( jc_info );
thrinfo_t* pb_info = bli_thrinfo_sub_node( pc_info );
thrinfo_t* ic_info = bli_thrinfo_sub_node( pb_info );
thrinfo_t* pa_info = bli_thrinfo_sub_node( ic_info );
thrinfo_t* jr_info = bli_thrinfo_sub_node( pa_info );
thrinfo_t* ir_info = bli_thrinfo_sub_node( jr_info );
dim_t jc_way = bli_thread_n_way( jc_info );
dim_t pc_way = bli_thread_n_way( pc_info );
dim_t pb_way = bli_thread_n_way( pb_info );
dim_t ic_way = bli_thread_n_way( ic_info );
dim_t pa_way = bli_thread_n_way( pa_info );
dim_t jr_way = bli_thread_n_way( jr_info );
dim_t ir_way = bli_thread_n_way( ir_info );
dim_t gl_nt = bli_thread_num_threads( jc_info );
dim_t jc_nt = bli_thread_num_threads( pc_info );
dim_t pc_nt = bli_thread_num_threads( pb_info );
dim_t pb_nt = bli_thread_num_threads( ic_info );
dim_t ic_nt = bli_thread_num_threads( pa_info );
dim_t pa_nt = bli_thread_num_threads( jr_info );
dim_t jr_nt = bli_thread_num_threads( ir_info );
printf( " gl jc kc pb ic pa jr ir\n" );
printf( "xx_nt: %4lu %4lu %4lu %4lu %4lu %4lu %4lu %4lu\n",
( unsigned long )gl_nt,
( unsigned long )jc_nt,
( unsigned long )pc_nt,
( unsigned long )pb_nt,
( unsigned long )ic_nt,
( unsigned long )pa_nt,
( unsigned long )jr_nt,
( unsigned long )1 );
printf( "\n" );
printf( " jc kc pb ic pa jr ir\n" );
printf( "xx_way: %4lu %4lu %4lu %4lu %4lu %4lu %4lu\n",
( unsigned long )jc_way,
( unsigned long )pc_way,
( unsigned long )pb_way,
( unsigned long )ic_way,
( unsigned long )pa_way,
( unsigned long )jr_way,
( unsigned long )ir_way );
printf( "=================================================\n" );
for ( gl_comm_id = 0; gl_comm_id < n_threads; ++gl_comm_id )
{
jc_info = threads[gl_comm_id];
pc_info = bli_thrinfo_sub_node( jc_info );
pb_info = bli_thrinfo_sub_node( pc_info );
ic_info = bli_thrinfo_sub_node( pb_info );
pa_info = bli_thrinfo_sub_node( ic_info );
jr_info = bli_thrinfo_sub_node( pa_info );
ir_info = bli_thrinfo_sub_node( jr_info );
dim_t gl_comm_id = bli_thread_ocomm_id( jc_info );
dim_t jc_comm_id = bli_thread_ocomm_id( pc_info );
dim_t pc_comm_id = bli_thread_ocomm_id( pb_info );
dim_t pb_comm_id = bli_thread_ocomm_id( ic_info );
dim_t ic_comm_id = bli_thread_ocomm_id( pa_info );
dim_t pa_comm_id = bli_thread_ocomm_id( jr_info );
dim_t jr_comm_id = bli_thread_ocomm_id( ir_info );
dim_t jc_work_id = bli_thread_work_id( jc_info );
dim_t pc_work_id = bli_thread_work_id( pc_info );
dim_t pb_work_id = bli_thread_work_id( pb_info );
dim_t ic_work_id = bli_thread_work_id( ic_info );
dim_t pa_work_id = bli_thread_work_id( pa_info );
dim_t jr_work_id = bli_thread_work_id( jr_info );
dim_t ir_work_id = bli_thread_work_id( ir_info );
printf( " gl jc pb kc pa ic jr \n" );
printf( "comm ids: %4lu %4lu %4lu %4lu %4lu %4lu %4lu\n",
( unsigned long )gl_comm_id,
( unsigned long )jc_comm_id,
( unsigned long )pc_comm_id,
( unsigned long )pb_comm_id,
( unsigned long )ic_comm_id,
( unsigned long )pa_comm_id,
( unsigned long )jr_comm_id );
printf( "work ids: %4ld %4ld %4lu %4lu %4ld %4ld %4ld\n",
( unsigned long )jc_work_id,
( unsigned long )pc_work_id,
( unsigned long )pb_work_id,
( unsigned long )ic_work_id,
( unsigned long )pa_work_id,
( unsigned long )jr_work_id,
( unsigned long )ir_work_id );
printf( "---------------------------------------\n" );
}
}
siz_t bli_thread_get_range_weighted_sub
(
thrinfo_t* thread,
doff_t diagoff,
uplo_t uplo,
dim_t m,
dim_t n,
dim_t bf,
bool_t handle_edge_low,
dim_t* j_start_thr,
dim_t* j_end_thr
)
{
dim_t n_way = bli_thread_n_way( thread );
dim_t my_id = bli_thread_work_id( thread );
dim_t bf_left = n % bf;
dim_t j;
dim_t off_j;
doff_t diagoff_j;
dim_t n_left;
dim_t width_j;
dim_t offm_inc, offn_inc;
double tri_dim, tri_area;
double area_total, area_per_thr;
siz_t area = 0;
// In this function, we assume that the caller has already determined
// that (a) the diagonal intersects the submatrix, and (b) the submatrix
// is either lower- or upper-stored.
if ( bli_is_lower( uplo ) )
{
// Prune away the unstored region above the diagonal, if it exists,
// and then to the right of where the diagonal intersects the bottom,
// if it exists. (Also, we discard the offset deltas since we don't
// need to actually index into the subpartition.)
bli_prune_unstored_region_top_l( diagoff, m, n, offm_inc );
bli_prune_unstored_region_right_l( diagoff, m, n, offn_inc );
// We don't need offm_inc, offn_inc here. These statements should
// prevent compiler warnings.
( void )offm_inc;
( void )offn_inc;
// Now that pruning has taken place, we know that diagoff >= 0.
// Compute the total area of the submatrix, accounting for the
// location of the diagonal, and divide it by the number of ways
// of parallelism.
tri_dim = ( double )( n - diagoff - 1 );
tri_area = tri_dim * ( tri_dim + 1.0 ) / 2.0;
area_total = ( double )m * ( double )n - tri_area;
area_per_thr = area_total / ( double )n_way;
// Initialize some variables prior to the loop: the offset to the
// current subpartition, the remainder of the n dimension, and
// the diagonal offset of the current subpartition.
off_j = 0;
diagoff_j = diagoff;
n_left = n;
// Iterate over the subpartition indices corresponding to each
// thread/caucus participating in the n_way parallelism.
for ( j = 0; j < n_way; ++j )
{
// Compute the width of the jth subpartition, taking the
// current diagonal offset into account, if needed.
width_j =
bli_thread_get_range_width_l
(
diagoff_j, m, n_left,
j, n_way,
bf, bf_left,
area_per_thr,
handle_edge_low
);
// If the current thread belongs to caucus j, this is his
// subpartition. So we compute the implied index range and
// end our search.
if ( j == my_id )
{
*j_start_thr = off_j;
*j_end_thr = off_j + width_j;
area = bli_find_area_trap_l( m, width_j, diagoff_j );
break;
}
// Shift the current subpartition's starting and diagonal offsets,
// as well as the remainder of the n dimension, according to the
// computed width, and then iterate to the next subpartition.
off_j += width_j;
diagoff_j -= width_j;
n_left -= width_j;
}
}
else // if ( bli_is_upper( uplo ) )
{
// Express the upper-stored case in terms of the lower-stored case.
// First, we convert the upper-stored trapezoid to an equivalent
// lower-stored trapezoid by rotating it 180 degrees.
bli_rotate180_trapezoid( diagoff, uplo );
// Now that the trapezoid is "flipped" in the n dimension, negate
// the bool that encodes whether to handle the edge case at the
// low (or high) end of the index range.
bli_toggle_bool( handle_edge_low );
// Compute the appropriate range for the rotated trapezoid.
area = bli_thread_get_range_weighted_sub
(
thread, diagoff, uplo, m, n, bf,
handle_edge_low,
j_start_thr, j_end_thr
);
// Reverse the indexing basis for the subpartition ranges so that
// the indices, relative to left-to-right iteration through the
// unrotated upper-stored trapezoid, map to the correct columns
// (relative to the diagonal). This amounts to subtracting the
// range from n.
bli_reverse_index_direction( *j_start_thr, *j_end_thr, n );
}
return area;
}
