int main(int argc, char ** argv) {
char * hijacked_executable = argv[0];
struct stat info;
int result = 0;
int i;
if (NULL != strstr(hijacked_executable, "hijack")) {
if (argc >= 2) {
return busybox_driver(argc - 1, argv + 1);
}
return 0;
}
if ( 0 == stat(RECOVERY_MODE_FILE, &info))
result = remove(RECOVERY_MODE_FILE);
result = remount_root("/system/bin/hijack", 1);
result = mkdir("/preinstall", S_IRWXU);
result = mkdir("/tmp", S_IRWXU);
result = mkdir("/res", S_IRWXU);
result = mkdir("/res/images", S_IRWXU);
result = remove("/etc");
result = mkdir("/etc", S_IRWXU);
result = rename("/sbin/adbd", "/sbin/adbd.old");
result = property_set("ctl.stop", "runtime");
result = property_set("ctl.stop", "zygote");
result = property_set("persist.service.adb.enable", "1");
printf("mountting cache and mount preinstall");
result = hijack_mount("/system/bin/hijack", "/dev/block/mmcblk0p15", "/cache");
result = hijack_mount("/system/bin/hijack", "/dev/block/mmcblk0p17", "/preinstall");
result = hijack_umount("/preinstall/hijack", "/pds");
result = hijack_umount("/preinstall/hijack", "/osh");
result = remount_system("/preinstall/hijack", 1);
char * updater_args[] = { UPDATE_BINARY, "2", "0", RECOVERY_UPDATE_ZIP, NULL };
result = exec_and_wait(updater_args);
return result;
}
int
main(int argc, char **argv) {
if (strcmp(basename(argv[0]), "recovery") != 0)
{
if (strstr(argv[0], "minizip") != NULL)
return minizip_main(argc, argv);
if (strstr(argv[0], "dedupe") != NULL)
return dedupe_main(argc, argv);
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "volume") != NULL)
return volume_main(argc, argv);
if (strstr(argv[0], "edify") != NULL)
return edify_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
#ifdef BOARD_RECOVERY_HANDLES_MOUNT
if (strstr(argv[0], "mount") && argc == 2 && !strstr(argv[0], "umount"))
{
load_volume_table();
return ensure_path_mounted(argv[1]);
}
#endif
if (strstr(argv[0], "poweroff")){
return reboot_main(argc, argv);
}
if (strstr(argv[0], "setprop"))
return setprop_main(argc, argv);
return busybox_driver(argc, argv);
}
__system("/sbin/postrecoveryboot.sh");
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// Recovery needs to install world-readable files, so clear umask
// set by init
umask(0);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
printf("Starting recovery on %s", ctime(&start));
device_ui_init(&ui_parameters);
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
load_volume_table();
process_volumes();
LOGI("Processing arguments.\n");
get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
LOGI("Checking arguments.\n");
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w':
#ifndef BOARD_RECOVERY_ALWAYS_WIPES
wipe_data = wipe_cache = 1;
#endif
break;
case 'c': wipe_cache = 1; break;
case 't': ui_show_text(1); break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
LOGI("device_recovery_start()\n");
device_recovery_start();
printf("Command:");
for (arg = 0; arg < argc; arg++) {
printf(" \"%s\"", argv[arg]);
}
printf("\n");
if (update_package) {
// For backwards compatibility on the cache partition only, if
// we're given an old 'root' path "CACHE:foo", change it to
// "/cache/foo".
if (strncmp(update_package, "CACHE:", 6) == 0) {
int len = strlen(update_package) + 10;
char* modified_path = malloc(len);
strlcpy(modified_path, "/cache/", len);
strlcat(modified_path, update_package+6, len);
printf("(replacing path \"%s\" with \"%s\")\n",
update_package, modified_path);
update_package = modified_path;
}
}
printf("\n");
property_list(print_property, NULL);
printf("\n");
int status = INSTALL_SUCCESS;
if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
if (erase_volume("/data")) status = INSTALL_ERROR;
if (has_datadata() && erase_volume("/datadata")) status = INSTALL_ERROR;
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n");
} else {
LOGI("Checking for extendedcommand...\n");
status = INSTALL_ERROR; // No command specified
// we are starting up in user initiated recovery here
// let's set up some default options
signature_check_enabled = 0;
script_assert_enabled = 0;
is_user_initiated_recovery = 1;
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_CLOCKWORK);
if (extendedcommand_file_exists()) {
LOGI("Running extendedcommand...\n");
int ret;
if (0 == (ret = run_and_remove_extendedcommand())) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
else {
handle_failure(ret);
}
} else {
LOGI("Skipping execution of extendedcommand, file not found...\n");
}
}
if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_ERROR);
}
if (status != INSTALL_SUCCESS || ui_text_visible()) {
prompt_and_wait();
}
verify_root_and_recovery();
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
sync();
if(!poweroff) {
ui_print("重启手机...\n");
#ifdef BOARD_HAS_DUAL_SYSTEM
if(multiboot==1){
#endif
android_reboot(ANDROID_RB_RESTART, 0, 0);
#ifdef BOARD_HAS_DUAL_SYSTEM
}else{
set_reboot_message(multiboot==2);
sync();
android_reboot(ANDROID_RB_RESTART, 0, 0);
}
#endif
}
else {
ui_print("关闭手机...\n");
android_reboot(ANDROID_RB_POWEROFF, 0, 0);
}
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (strcmp(basename(argv[0]), "recovery") != 0)
{
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "volume") != NULL)
return volume_main(argc, argv);
if (strstr(argv[0], "edify") != NULL)
return edify_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
#ifdef BOARD_RECOVERY_HANDLES_MOUNT
if (strstr(argv[0], "mount") && argc == 2 && !strstr(argv[0], "umount"))
{
load_volume_table();
return ensure_path_mounted(argv[1]);
}
#endif
if (strstr(argv[0], "poweroff")){
return reboot_main(argc, argv);
}
if (strstr(argv[0], "setprop"))
return setprop_main(argc, argv);
return busybox_driver(argc, argv);
}
__system("/sbin/postrecoveryboot.sh");
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
printf("Starting recovery on %s", ctime(&start));
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
load_volume_table();
process_volumes();
LOGI("Processing arguments.\n");
get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
const char *encrypted_fs_mode = NULL;
int wipe_data = 0, wipe_cache = 0;
int toggle_secure_fs = 0;
encrypted_fs_info encrypted_fs_data;
LOGI("Checking arguments.\n");
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w':
#ifndef BOARD_RECOVERY_ALWAYS_WIPES
wipe_data = wipe_cache = 1;
#endif
break;
case 'c': wipe_cache = 1; break;
case 'e': encrypted_fs_mode = optarg; toggle_secure_fs = 1; break;
case 't': ui_show_text(1); break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
LOGI("device_recovery_start()\n");
device_recovery_start();
printf("Command:");
for (arg = 0; arg < argc; arg++) {
printf(" \"%s\"", argv[arg]);
}
printf("\n");
if (update_package) {
// For backwards compatibility on the cache partition only, if
// we're given an old 'root' path "CACHE:foo", change it to
// "/cache/foo".
if (strncmp(update_package, "CACHE:", 6) == 0) {
int len = strlen(update_package) + 10;
char* modified_path = malloc(len);
strlcpy(modified_path, "/cache/", len);
strlcat(modified_path, update_package+6, len);
printf("(replacing path \"%s\" with \"%s\")\n",
update_package, modified_path);
update_package = modified_path;
}
}
printf("\n");
property_list(print_property, NULL);
printf("\n");
int status = INSTALL_SUCCESS;
if (toggle_secure_fs) {
if (strcmp(encrypted_fs_mode,"on") == 0) {
encrypted_fs_data.mode = MODE_ENCRYPTED_FS_ENABLED;
ui_print("Enabling Encrypted FS.\n");
} else if (strcmp(encrypted_fs_mode,"off") == 0) {
encrypted_fs_data.mode = MODE_ENCRYPTED_FS_DISABLED;
ui_print("Disabling Encrypted FS.\n");
} else {
ui_print("Error: invalid Encrypted FS setting.\n");
status = INSTALL_ERROR;
}
// Recovery strategy: if the data partition is damaged, disable encrypted file systems.
// This preventsthe device recycling endlessly in recovery mode.
if ((encrypted_fs_data.mode == MODE_ENCRYPTED_FS_ENABLED) &&
(read_encrypted_fs_info(&encrypted_fs_data))) {
ui_print("Encrypted FS change aborted, resetting to disabled state.\n");
encrypted_fs_data.mode = MODE_ENCRYPTED_FS_DISABLED;
}
if (status != INSTALL_ERROR) {
if (erase_volume("/data")) {
ui_print("Data wipe failed.\n");
status = INSTALL_ERROR;
} else if (erase_volume("/cache")) {
ui_print("Cache wipe failed.\n");
status = INSTALL_ERROR;
} else if ((encrypted_fs_data.mode == MODE_ENCRYPTED_FS_ENABLED) &&
(restore_encrypted_fs_info(&encrypted_fs_data))) {
ui_print("Encrypted FS change aborted.\n");
status = INSTALL_ERROR;
} else {
ui_print("Successfully updated Encrypted FS.\n");
status = INSTALL_SUCCESS;
}
}
} else if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
if (erase_volume("/data")) status = INSTALL_ERROR;
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n");
} else {
LOGI("Checking for extendedcommand...\n");
status = INSTALL_ERROR; // No command specified
// we are starting up in user initiated recovery here
// let's set up some default options
signature_check_enabled = 0;
script_assert_enabled = 0;
is_user_initiated_recovery = 1;
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_CLOCKWORK);
if (extendedcommand_file_exists()) {
LOGI("Running extendedcommand...\n");
int ret;
if (0 == (ret = run_and_remove_extendedcommand())) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
else {
handle_failure(ret);
}
} else {
LOGI("Skipping execution of extendedcommand, file not found...\n");
}
}
if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_ERROR);
}
if (status != INSTALL_SUCCESS || ui_text_visible()) {
prompt_and_wait();
}
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
if(!poweroff)
ui_print("Rebooting...\n");
else
ui_print("Shutting down...\n");
sync();
reboot((!poweroff) ? RB_AUTOBOOT : RB_POWER_OFF);
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (strstr(argv[0], "recovery") == NULL)
{
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "amend"))
return amend_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
if (strstr(argv[0], "setprop"))
return setprop_main(argc, argv);
return busybox_driver(argc, argv);
}
__system("/sbin/postrecoveryboot.sh");
create_fstab();
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
fprintf(stderr, "Starting recovery on %s", ctime(&start));
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
#ifdef BOARD_GOAPK_DEFY
ui_print(EXPAND(RECOVERY_VERSION_GOAPK)"\n");
ui_print(EXPAND(RECOVERY_VERSION_QUN)"\n");
#endif
get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w': wipe_data = wipe_cache = 1; break;
case 'c': wipe_cache = 1; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
device_recovery_start();
fprintf(stderr, "Command:");
for (arg = 0; arg < argc; arg++) {
fprintf(stderr, " \"%s\"", argv[arg]);
}
fprintf(stderr, "\n\n");
property_list(print_property, NULL);
fprintf(stderr, "\n");
int status = INSTALL_SUCCESS;
RecoveryCommandContext ctx = { NULL };
if (register_update_commands(&ctx)) {
LOGE("Can't install update commands\n");
}
if (update_package != NULL) {
if (wipe_data && erase_root("DATA:")) status = INSTALL_ERROR;
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
if (erase_root("DATA:")) status = INSTALL_ERROR;
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n");
} else {
LOGI("Checking for extendedcommand...\n");
status = INSTALL_ERROR; // No command specified
// we are starting up in user initiated recovery here
// let's set up some default options
signature_check_enabled = 0;
script_assert_enabled = 0;
is_user_initiated_recovery = 1;
ui_set_show_text(1);
if (extendedcommand_file_exists()) {
LOGI("Running extendedcommand...\n");
int ret;
if (0 == (ret = run_and_remove_extendedcommand())) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
else {
handle_failure(ret);
}
} else {
LOGI("Skipping execution of extendedcommand, file not found...\n");
}
}
if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) ui_set_background(BACKGROUND_ICON_ERROR);
if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait();
#ifndef BOARD_HAS_NO_MISC_PARTITION
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
#endif
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
ui_print("Rebooting...\n");
sync();
reboot(RB_AUTOBOOT);
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (argc == 2 && strcmp(argv[1], "adbd") == 0) {
adb_main();
return 0;
}
// Recovery needs to install world-readable files, so clear umask
// set by init
umask(0);
if (strcmp(basename(argv[0]), "recovery") != 0)
{
if (strstr(argv[0], "minizip") != NULL)
return minizip_main(argc, argv);
if (strstr(argv[0], "dedupe") != NULL)
return dedupe_main(argc, argv);
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "volume") != NULL)
return volume_main(argc, argv);
if (strstr(argv[0], "edify") != NULL)
return edify_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "make_ext4fs") != NULL)
return make_ext4fs_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "bu") == argv[0] + strlen(argv[0]) - 2)
return bu_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
#ifdef BOARD_RECOVERY_HANDLES_MOUNT
if (strstr(argv[0], "mount") && argc == 2 && !strstr(argv[0], "umount"))
{
load_volume_table();
return ensure_path_mounted(argv[1]);
}
#endif
if (strstr(argv[0], "poweroff")){
return reboot_main(argc, argv);
}
if (strstr(argv[0], "setprop"))
return setprop_main(argc, argv);
if (strstr(argv[0], "getprop"))
return getprop_main(argc, argv);
return busybox_driver(argc, argv);
}
#ifdef RECOVERY_CHARGEMODE
handle_chargemode();
#endif
//__system("/sbin/postrecoveryboot.sh");
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
printf("Starting recovery on %s\n", ctime(&start));
#ifdef RECOVERY_CHARGEMODE
int flag;
flag = get_chargemode();
if(flag == 1){
// __system("mount /dev/block/mmcblk0p12 /system");
// __system("sleep 1");
__system("charge");
}else {
#endif
device_ui_init(&ui_parameters);
ui_init();
ui_print(EXPAND(RECOVERY_WELCOME)"\n");
ui_print(EXPAND(RECOVERY_VERSION_INFO)"\n");
ui_print(EXPAND(RECOVERY_BUILD_DATE)"\n");
__system("/sbin/postrecoveryboot.sh");
#ifdef BOARD_RECOVERY_SWIPE
#ifndef BOARD_TOUCH_RECOVERY
//display directions for swipe controls
ui_print("上/下滑动选择.\n");
// ui_print("Swipe to the right for enter.\n");
// ui_print("Swipe to the left for back.\n");
#endif
#endif
load_volume_table();
process_volumes();
LOGI("Processing arguments.\n");
get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int sideload = 0;
// int headless = 0;
LOGI("Checking arguments.\n");
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w':
#ifndef BOARD_RECOVERY_ALWAYS_WIPES
wipe_data = wipe_cache = 1;
#endif
break;
/* case 'h':
ui_set_background(BACKGROUND_ICON_CID);
ui_show_text(0);
headless = 1;
break; */
case 'c': wipe_cache = 1; break;
case 't': ui_show_text(1); break;
case 'l': sideload = 1; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
struct selinux_opt seopts[] = {
{ SELABEL_OPT_PATH, "/file_contexts" }
};
sehandle = selabel_open(SELABEL_CTX_FILE, seopts, 1);
if (!sehandle) {
fprintf(stderr, "Warning: No file_contexts\n");
// ui_print("Warning: No file_contexts\n");
}
LOGI("device_recovery_start()\n");
device_recovery_start();
enable_key_backlight();
printf("Command:");
for (arg = 0; arg < argc; arg++) {
printf(" \"%s\"", argv[arg]);
}
printf("\n");
if (update_package) {
// For backwards compatibility on the cache partition only, if
// we're given an old 'root' path "CACHE:foo", change it to
// "/cache/foo".
if (strncmp(update_package, "CACHE:", 6) == 0) {
int len = strlen(update_package) + 10;
char* modified_path = malloc(len);
strlcpy(modified_path, "/cache/", len);
strlcat(modified_path, update_package+6, len);
printf("(replacing path \"%s\" with \"%s\")\n",
update_package, modified_path);
update_package = modified_path;
}
}
printf("\n");
property_list(print_property, NULL);
printf("\n");
int status = INSTALL_SUCCESS;
if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("安装终止.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
ignore_data_media_workaround(1);
if (erase_volume("/data")) status = INSTALL_ERROR;
ignore_data_media_workaround(0);
if (has_datadata() && erase_volume("/datadata")) status = INSTALL_ERROR;
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("清除数据失败.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("清除缓存失败.\n");
} else if (sideload) {
signature_check_enabled = 0;
// if (!headless)
ui_set_show_text(1);
if (0 == apply_from_adb()) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
} else {
LOGI("Checking for extendedcommand...\n");
status = INSTALL_ERROR; // No command specified
// we are starting up in user initiated recovery here
// let's set up some default options
signature_check_enabled = 0;
script_assert_enabled = 0;
is_user_initiated_recovery = 1;
// if (!headless) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_CLOCKWORK);
// }
if (extendedcommand_file_exists()) {
LOGI("Running extendedcommand...\n");
int ret;
if (0 == (ret = run_and_remove_extendedcommand())) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
else {
handle_failure(ret);
}
} else {
LOGI("Skipping execution of extendedcommand, file not found...\n");
}
}
setup_adbd();
/* if (headless) {
headless_wait();
} */
if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_ERROR);
}
// else if (status != INSTALL_SUCCESS || ui_text_visible()) {
if (status != INSTALL_SUCCESS || ui_text_visible()) {
prompt_and_wait();
}
verify_root_and_recovery();
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
sync();
if(!poweroff) {
ui_print("正在重启...\n");
android_reboot(ANDROID_RB_RESTART, 0, 0);
}
else {
ui_print("正在关机...\n");
android_reboot(ANDROID_RB_POWEROFF, 0, 0);
}
return EXIT_SUCCESS;
}
#ifdef RECOVERY_CHARGEMODE
return 0;
}
int
main(int argc, char **argv) {
time_t start = time(NULL);
// If this binary is started with the single argument "--adbd",
// instead of being the normal recovery binary, it turns into kind
// of a stripped-down version of adbd that only supports the
// 'sideload' command. Note this must be a real argument, not
// anything in the command file or bootloader control block; the
// only way recovery should be run with this argument is when it
// starts a copy of itself from the apply_from_adb() function.
if (argc == 2 && strcmp(argv[1], "--adbd") == 0) {
adb_main();
return 0;
}
// Handle alternative invocations
char* command = argv[0];
char* stripped = strrchr(argv[0], '/');
if (stripped)
command = stripped + 1;
if (strcmp(command, "recovery") != 0) {
struct recovery_cmd cmd = get_command(command);
if (cmd.name)
return cmd.main_func(argc, argv);
#ifdef BOARD_RECOVERY_HANDLES_MOUNT
if (!strcmp(command, "mount") && argc == 2)
{
load_volume_table();
return ensure_path_mounted(argv[1]);
}
#endif
if (!strcmp(command, "setup_adbd")) {
load_volume_table();
setup_adbd();
return 0;
}
if (strstr(argv[0], "start")) {
property_set("ctl.start", argv[1]);
return 0;
}
if (strstr(argv[0], "stop")) {
property_set("ctl.stop", argv[1]);
return 0;
}
return busybox_driver(argc, argv);
}
// devices can run specific tasks on recovery start
__system("/sbin/postrecoveryboot.sh");
// Clear umask for packages that copy files out to /tmp and then over
// to /system without properly setting all permissions (eg. gapps).
umask(0);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
printf("Starting recovery on %s", ctime(&start));
load_volume_table();
setup_data_media(1);
vold_client_start(&v_callbacks, 0);
vold_set_automount(1);
setup_legacy_storage_paths();
ensure_path_mounted(LAST_LOG_FILE);
rotate_last_logs(10);
get_args(&argc, &argv);
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0, wipe_media = 0, show_text = 0, sideload = 0;
bool just_exit = false;
bool shutdown_after = false;
printf("Checking arguments.\n");
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w': wipe_data = wipe_cache = 1; break;
case 'm': wipe_media = 1; break;
case 'c': wipe_cache = 1; break;
case 't': show_text = 1; break;
case 'x': just_exit = true; break;
case 'a': sideload = 1; break;
case 'p': shutdown_after = true; break;
case 'g': {
if (stage == NULL || *stage == '\0') {
char buffer[20] = "1/";
strncat(buffer, optarg, sizeof(buffer)-3);
stage = strdup(buffer);
}
break;
}
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
printf("stage is [%s]\n", stage);
device_ui_init(&ui_parameters);
ui_init();
ui_print(EXPAND(RECOVERY_MOD_VERSION_BUILD) "\n");
ui_print("ClockworkMod " EXPAND(CWM_BASE_VERSION) "\n");
LOGI("Device target: " EXPAND(TARGET_COMMON_NAME) "\n");
#ifdef PHILZ_TOUCH_RECOVERY
print_libtouch_version(0);
#endif
int st_cur, st_max;
if (stage != NULL && sscanf(stage, "%d/%d", &st_cur, &st_max) == 2) {
ui_SetStage(st_cur, st_max);
}
// ui_SetStage(5, 8); // debug
if (show_text) ui_ShowText(true);
struct selinux_opt seopts[] = {
{ SELABEL_OPT_PATH, "/file_contexts" }
};
sehandle = selabel_open(SELABEL_CTX_FILE, seopts, 1);
if (!sehandle) {
ui_print("Warning: No file_contexts\n");
}
LOGI("device_recovery_start()\n");
device_recovery_start();
printf("Command:");
for (arg = 0; arg < argc; arg++) {
printf(" \"%s\"", argv[arg]);
}
printf("\n");
if (update_package) {
// For backwards compatibility on the cache partition only, if
// we're given an old 'root' path "CACHE:foo", change it to
// "/cache/foo".
if (strncmp(update_package, "CACHE:", 6) == 0) {
int len = strlen(update_package) + 10;
char* modified_path = (char*)malloc(len);
strlcpy(modified_path, "/cache/", len);
strlcat(modified_path, update_package+6, len);
printf("(replacing path \"%s\" with \"%s\")\n",
update_package, modified_path);
update_package = modified_path;
}
}
printf("\n");
property_list(print_property, NULL);
printf("\n");
int status = INSTALL_SUCCESS;
if (update_package != NULL) {
status = install_package(update_package, &wipe_cache, TEMPORARY_INSTALL_FILE);
if (status == INSTALL_SUCCESS && wipe_cache) {
if (erase_volume("/cache")) {
LOGE("Cache wipe (requested by package) failed.\n");
}
}
if (status != INSTALL_SUCCESS) {
ui_print("Installation aborted.\n");
// If this is an eng or userdebug build, then automatically
// turn the text display on if the script fails so the error
// message is visible.
char buffer[PROPERTY_VALUE_MAX+1];
property_get("ro.build.fingerprint", buffer, "");
if (strstr(buffer, ":userdebug/") || strstr(buffer, ":eng/")) {
ui_ShowText(true);
}
}
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
if (erase_volume("/data")) status = INSTALL_ERROR;
if (has_datadata() && erase_volume("/datadata")) status = INSTALL_ERROR;
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n");
} else if (wipe_media) {
if (is_data_media() && erase_volume("/data/media")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Media wipe failed.\n");
} else if (sideload) {
status = enter_sideload_mode(status);
} else if (!just_exit) {
// let's check recovery start up scripts (openrecoveryscript and ROM Manager extendedcommands)
status = INSTALL_NONE; // No command specified, it is a normal recovery boot unless we find a boot script to run
LOGI("Checking for extendedcommand & OpenRecoveryScript...\n");
// we need show_text to show boot scripts log
bool text_visible = ui_IsTextVisible();
ui_SetShowText(true);
if (0 == check_boot_script_file(EXTENDEDCOMMAND_SCRIPT)) {
LOGI("Running extendedcommand...\n");
status = INSTALL_ERROR;
if (0 == run_and_remove_extendedcommand())
status = INSTALL_SUCCESS;
}
if (0 == check_boot_script_file(ORS_BOOT_SCRIPT_FILE)) {
LOGI("Running openrecoveryscript....\n");
status = INSTALL_ERROR;
if (0 == run_ors_boot_script())
status = INSTALL_SUCCESS;
}
ui_SetShowText(text_visible);
}
if (status == INSTALL_ERROR || status == INSTALL_CORRUPT) {
copy_logs();
// ui_set_background(BACKGROUND_ICON_ERROR); // will be set in prompt_and_wait() after recovery lock check
handle_failure();
}
if (status != INSTALL_SUCCESS || ui_IsTextVisible()) {
ui_SetShowText(true);
#ifdef PHILZ_TOUCH_RECOVERY
check_recovery_lock();
#endif
prompt_and_wait(status);
}
// We reach here when in main menu we choose reboot main system or on success install of boot scripts and recovery commands
finish_recovery(send_intent);
if (shutdown_after) {
ui_print("Shutting down...\n");
reboot_main_system(ANDROID_RB_POWEROFF, 0, 0);
} else {
ui_print("Rebooting...\n");
reboot_main_system(ANDROID_RB_RESTART, 0, 0);
}
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (argc == 2 && strcmp(argv[1], "adbd") == 0) {
adb_main();
return 0;
}
// Recovery needs to install world-readable files, so clear umask
// set by init
umask(0);
char* command = argv[0];
char* stripped = strrchr(argv[0], '/');
if (stripped)
command = stripped + 1;
if (strcmp(command, "recovery") != 0)
{
struct recovery_cmd cmd = get_command(command);
if (cmd.name)
return cmd.main_func(argc, argv);
#ifdef BOARD_RECOVERY_HANDLES_MOUNT
if (!strcmp(command, "mount") && argc == 2)
{
load_volume_table();
return ensure_path_mounted(argv[1]);
}
#endif
if (!strcmp(command, "setup_adbd")) {
load_volume_table();
setup_adbd();
return 0;
}
if (!strcmp(command, "start")) {
property_set("ctl.start", argv[1]);
return 0;
}
if (!strcmp(command, "stop")) {
property_set("ctl.stop", argv[1]);
return 0;
}
return busybox_driver(argc, argv);
}
//__system("/sbin/postrecoveryboot.sh");
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
printf("Starting recovery on %s\n", ctime(&start));
device_ui_init(&ui_parameters);
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
ui_print("Builder: "EXPAND(RECOVERY_BUILDER)"\n");
ui_print("Date: "EXPAND(RECOVERY_BUILD_TIME)"\n");
ui_print("weibo：@nx-baby\n");
__system("/sbin/postrecoveryboot.sh");
//#ifdef BOARD_RECOVERY_SWIPE
//#ifndef BOARD_TOUCH_RECOVERY
//display directions for swipe controls
ui_print("Swipe up/down to change selections.\n");
ui_print("Swipe to the right for enter.\n");
ui_print("Swipe to the left for back.\n");
//#endif
//#endif
load_volume_table();
process_volumes();
vold_init();
setup_legacy_storage_paths();
#ifdef QCOM_HARDWARE
parse_t_daemon_data_files();
apply_time_zone();
#endif
LOGI("Processing arguments.\n");
ensure_path_mounted(LAST_LOG_FILE);
rotate_last_logs(10);
get_args(&argc, &argv);
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int sideload = 0;
int headless = 0;
int shutdown_after = 0;
LOGI("Checking arguments.\n");
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 's': send_intent = optarg; break;
case 'u':
if (update_package == NULL)
update_package = optarg;
break;
case 'w':
#ifndef BOARD_RECOVERY_ALWAYS_WIPES
wipe_data = wipe_cache = 1;
#endif
break;
case 'h':
ui_set_background(BACKGROUND_ICON_CID);
ui_show_text(0);
headless = 1;
break;
case 'c': wipe_cache = 1; break;
case 't': ui_show_text(1); break;
case 'l': sideload = 1; break;
case 'p': shutdown_after = 1; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
struct selinux_opt seopts[] = {
{ SELABEL_OPT_PATH, "/file_contexts" }
};
sehandle = selabel_open(SELABEL_CTX_FILE, seopts, 1);
if (!sehandle) {
fprintf(stderr, "Warning: No file_contexts\n");
//ui_print("Warning: No file_contexts\n");
}
LOGI("device_recovery_start()\n");
device_recovery_start();
printf("Command:");
for (arg = 0; arg < argc; arg++) {
printf(" \"%s\"", argv[arg]);
}
printf("\n");
if (update_package) {
// For backwards compatibility on the cache partition only, if
// we're given an old 'root' path "CACHE:foo", change it to
// "/cache/foo".
if (strncmp(update_package, "CACHE:", 6) == 0) {
int len = strlen(update_package) + 10;
char* modified_path = malloc(len);
strlcpy(modified_path, "/cache/", len);
strlcat(modified_path, update_package+6, len);
printf("(replacing path \"%s\" with \"%s\")\n",
update_package, modified_path);
update_package = modified_path;
}
}
printf("\n");
property_list(print_property, NULL);
printf("\n");
int status = INSTALL_SUCCESS;
if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) {
copy_logs();
ui_print("Installation aborted.\n");
} else if (!strcmp(TARGET_DEVICE, "A0001")) { //hack for a0001 ota
if (strstr(update_package, "/.OTA/"))
send_intent = "0";
}
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
preserve_data_media(0);
if (erase_volume("/data")) status = INSTALL_ERROR;
preserve_data_media(1);
if (has_datadata() && erase_volume("/datadata")) status = INSTALL_ERROR;
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) {
copy_logs();
ui_print("Data wipe failed.\n");
}
} else if (wipe_cache) {
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) {
copy_logs();
ui_print("Cache wipe failed.\n");
}
} else {
LOGI("Checking for extendedcommand...\n");
status = INSTALL_ERROR; // No command specified
// we are starting up in user initiated recovery here
// let's set up some default options
signature_check_enabled = 0;
is_user_initiated_recovery = 1;
if (!headless) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_CLOCKWORK);
}
if (extendedcommand_file_exists()) {
LOGI("Running extendedcommand...\n");
int ret;
if (0 == (ret = run_and_remove_extendedcommand())) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
else {
handle_failure(ret);
}
} else {
LOGI("Skipping execution of extendedcommand, file not found...\n");
}
}
if (sideload) {
signature_check_enabled = 0;
if (!headless)
ui_set_show_text(1);
if (0 == apply_from_adb()) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
}
if (headless) {
headless_wait();
}
if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_ERROR);
}
else if (status != INSTALL_SUCCESS || ui_text_visible()) {
prompt_and_wait();
}
// We reach here when in main menu we choose reboot main system or for some wipe commands on start
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
if (shutdown_after) {
ui_print("Shutting down...\n");
reboot_main_system(ANDROID_RB_POWEROFF, 0, 0);
} else {
ui_print("Rebooting...\n");
reboot_main_system(ANDROID_RB_RESTART, 0, 0);
}
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (strstr(argv[0], "recovery") == NULL)
{
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
if (strstr(argv[0], "setprop"))
return setprop_main(argc, argv);
if (strstr(argv[0], "getprop"))
return getprop_main(argc, argv);
return busybox_driver(argc, argv);
}
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
fprintf(stderr, "Starting recovery on %s", ctime(&start));
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
//get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w': wipe_data = wipe_cache = 1; break;
case 'c': wipe_cache = 1; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
//device_recovery_start();
fprintf(stderr, "Command:");
for (arg = 0; arg < argc; arg++) {
fprintf(stderr, " \"%s\"", argv[arg]);
}
fprintf(stderr, "\n\n");
property_list(print_property, NULL);
fprintf(stderr, "\n");
int status = INSTALL_SUCCESS;
//Register amend commands
RecoveryCommandContext ctx = { NULL };
if (register_update_commands(&ctx)) {
LOGE("Can't install update commands\n");
}
if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
if (erase_root("DATA:")) status = INSTALL_ERROR;
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n");
} else {
status = INSTALL_ERROR; // No command specified
}
if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait();
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
ui_print("Rebooting...\n");
sync();
reboot(RB_AUTOBOOT);
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (argc == 2 && strcmp(argv[1], "adbd") == 0) {
adb_main();
return 0;
}
// Recovery needs to install world-readable files, so clear umask
// set by init
umask(0);
char* command = argv[0];
char* stripped = strrchr(argv[0], '/');
if (stripped)
command = stripped + 1;
if (strcmp(command, "recovery") != 0)
{
struct recovery_cmd cmd = get_command(command);
if (cmd.name)
return cmd.main_func(argc, argv);
#ifdef BOARD_RECOVERY_HANDLES_MOUNT
if (!strcmp(command, "mount") && argc == 2)
{
load_volume_table();
return ensure_path_mounted(argv[1]);
}
#endif
if (!strcmp(command, "setup_adbd")) {
load_volume_table();
setup_adbd();
return 0;
}
if (!strcmp(command, "start")) {
property_set("ctl.start", argv[1]);
return 0;
}
if (!strcmp(command, "stop")) {
property_set("ctl.stop", argv[1]);
return 0;
}
/* Make sure stdout is not fully buffered, we don't want to
* have issues when calling busybox commands */
setlinebuf(stdout);
return busybox_driver(argc, argv);
}
__system("/sbin/postrecoveryboot.sh");
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
printf("Starting recovery on %s\n", ctime(&start));
device_ui_init(&ui_parameters);
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
#ifdef BOARD_RECOVERY_SWIPE
#ifndef BOARD_TOUCH_RECOVERY
//display directions for swipe controls
ui_print("Swipe up/down to change selections.\n");
ui_print("Swipe to the right for enter.\n");
ui_print("Swipe to the left for back.\n");
#endif
#endif
load_volume_table();
process_volumes();
vold_client_start(&v_callbacks, 0);
vold_set_automount(1);
setup_legacy_storage_paths();
LOGI("Processing arguments.\n");
ensure_path_mounted(LAST_LOG_FILE);
rotate_last_logs(10);
get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
const char *update_ubuntu_package = NULL;
const char *user_data_update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int sideload = 0;
int headless = 0;
try_autodeploy(AUTODEPLOY_PACKAGE_FILE);
try_autodeploy(AUTODEPLOY_PACKAGE_FILE_MULTI);
LOGI("Checking arguments.\n");
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'd': user_data_update_package = optarg; break;
case 'w':
#ifndef BOARD_RECOVERY_ALWAYS_WIPES
wipe_data = wipe_cache = 1;
#endif
break;
case 'h':
ui_set_background(BACKGROUND_ICON_CID);
ui_show_text(0);
headless = 1;
break;
case 'c': wipe_cache = 1; break;
case 't': ui_show_text(1); break;
case 'l': sideload = 1; break;
case 'v': update_ubuntu_package = UBUNTU_UPDATE_SCRIPT; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
struct selinux_opt seopts[] = {
{ SELABEL_OPT_PATH, "/file_contexts" }
};
sehandle = selabel_open(SELABEL_CTX_FILE, seopts, 1);
if (!sehandle) {
fprintf(stderr, "Warning: No file_contexts\n");
ui_print("Warning: No file_contexts\n");
}
LOGI("device_recovery_start()\n");
device_recovery_start();
printf("Command:");
for (arg = 0; arg < argc; arg++) {
printf(" \"%s\"", argv[arg]);
}
printf("\n");
if (update_package) {
// For backwards compatibility on the cache partition only, if
// we're given an old 'root' path "CACHE:foo", change it to
// "/cache/foo".
if (strncmp(update_package, "CACHE:", 6) == 0) {
int len = strlen(update_package) + 10;
char* modified_path = malloc(len);
strlcpy(modified_path, "/cache/", len);
strlcat(modified_path, update_package+6, len);
printf("(replacing path \"%s\" with \"%s\")\n",
update_package, modified_path);
update_package = modified_path;
}
}
printf("\n");
property_list(print_property, NULL);
printf("\n");
int status = INSTALL_SUCCESS;
if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) {
copy_logs();
ui_print("Installation aborted.\n");
}
} else if (update_ubuntu_package != NULL) {
LOGI("Performing Ubuntu update");
ui_set_background(BACKGROUND_ICON_INSTALLING);
ui_show_indeterminate_progress();
ui_print("Installing Ubuntu update.\n");
char tmp[PATH_MAX];
sprintf(tmp, "%s %s", UBUNTU_UPDATE_SCRIPT, UBUNTU_COMMAND_FILE );
__system(tmp);
LOGI("Ubuntu update complete");
ui_print("Ubuntu update complete.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
ignore_data_media_workaround(1);
if (erase_volume("/data")) status = INSTALL_ERROR;
ignore_data_media_workaround(0);
if (has_datadata() && erase_volume("/datadata")) status = INSTALL_ERROR;
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) {
copy_logs();
ui_print("Data wipe failed.\n");
}
} else if (wipe_cache) {
if (wipe_cache && erase_volume("/cache")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) {
copy_logs();
ui_print("Cache wipe failed.\n");
}
} else {
LOGI("Checking for extendedcommand...\n");
status = INSTALL_ERROR; // No command specified
// we are starting up in user initiated recovery here
// let's set up some default options
signature_check_enabled = 0;
script_assert_enabled = 0;
is_user_initiated_recovery = 1;
if (!headless) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_UBUNTU);
}
if (extendedcommand_file_exists()) {
LOGI("Running extendedcommand...\n");
int ret;
if (0 == (ret = run_and_remove_extendedcommand())) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
else {
handle_failure(ret);
}
} else {
LOGI("Skipping execution of extendedcommand, file not found...\n");
}
}
if (sideload) {
signature_check_enabled = 0;
if (!headless)
ui_set_show_text(1);
if (0 == apply_from_adb()) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
}
if (headless) {
headless_wait();
}
if (user_data_update_package != NULL) {
status = install_package(user_data_update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
}
if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) {
ui_set_show_text(1);
ui_set_background(BACKGROUND_ICON_ERROR);
}
else if (status != INSTALL_SUCCESS || ui_text_visible()) {
prompt_and_wait();
}
// We reach here when in main menu we choose reboot main system or for some wipe commands on start
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
ui_print("Rebooting...\n");
reboot_main_system(ANDROID_RB_RESTART, 0, 0);
return EXIT_SUCCESS;
}