BOOL LLImageJ2COJ::decodeImpl(LLImageJ2C &base, LLImageRaw &raw_image, F32 decode_time, S32 first_channel, S32 max_channel_count)
{
LLTimer decode_timer;
/* Extract metadata */
/* ---------------- */
U8* c_data = base.getData();
size_t c_size = base.getDataSize();
size_t position = 0;
while (position < 1024 && position < (c_size - 7)) // the comment field should be in the first 1024 bytes.
{
if (c_data[position] == 0xff && c_data[position + 1] == 0x64)
{
U8 high_byte = c_data[position + 2];
U8 low_byte = c_data[position + 3];
S32 c_length = (high_byte * 256) + low_byte; // This size also counts the markers, 00 01 and itself
if (c_length > 200) // sanity check
{
// While comments can be very long, anything longer then 200 is suspect.
break;
}
if (position + 2 + c_length > c_size)
{
// comment extends past end of data, corruption, or all data not retrived yet.
break;
}
// if the comment block does not end at the end of data, check to see if the next
// block starts with 0xFF
if (position + 2 + c_length < c_size && c_data[position + 2 + c_length] != 0xff)
{
// invalied comment block
break;
}
// extract the comment minus the markers, 00 01
raw_image.mComment.assign((char*)c_data + position + 6, c_length - 4);
break;
}
++position;
}
opj_dparameters_t parameters; /* decompression parameters */
opj_event_mgr_t event_mgr = { }; /* event manager */
opj_image_t *image = nullptr;
opj_dinfo_t* dinfo = nullptr; /* handle to a decompressor */
opj_cio_t *cio = nullptr;
/* configure the event callbacks (not required) */
event_mgr.error_handler = error_callback;
event_mgr.warning_handler = warning_callback;
event_mgr.info_handler = info_callback;
/* set decoding parameters to default values */
opj_set_default_decoder_parameters(¶meters);
parameters.cp_reduce = base.getRawDiscardLevel();
if(parameters.cp_reduce == 0 && *(U16*)(base.getData() + base.getDataSize() - 2) != 0xD9FF)
{
bool failed = true;
for(S32 i = base.getDataSize()-1; i > 42; --i)
{
if(base.getData()[i] != 0x00)
{
failed = *(U16*)(base.getData()+i-1) != 0xD9FF;
break;
}
}
if(failed)
{
opj_image_destroy(image);
base.decodeFailed();
return TRUE;
}
}
/* decode the code-stream */
/* ---------------------- */
/* JPEG-2000 codestream */
/* get a decoder handle */
dinfo = opj_create_decompress(CODEC_J2K);
/* catch events using our callbacks and give a local context */
opj_set_event_mgr((opj_common_ptr)dinfo, &event_mgr, stderr);
/* setup the decoder decoding parameters using user parameters */
opj_setup_decoder(dinfo, ¶meters);
/* open a byte stream */
cio = opj_cio_open((opj_common_ptr)dinfo, base.getData(), base.getDataSize());
/* decode the stream and fill the image structure */
image = opj_decode(dinfo, cio);
/* close the byte stream */
opj_cio_close(cio);
/* free remaining structures */
if(dinfo)
{
opj_destroy_decompress(dinfo);
}
// The image decode failed if the return was NULL or the component
// count was zero. The latter is just a sanity check before we
// dereference the array.
if(!image || !image->numcomps)
{
LL_DEBUGS("Texture") << "ERROR -> decodeImpl: failed to decode image!" << LL_ENDL;
if (image)
{
opj_image_destroy(image);
}
base.decodeFailed();
return TRUE; // done
}
// sometimes we get bad data out of the cache - check to see if the decode succeeded
for (S32 i = 0; i < image->numcomps; i++)
{
if (image->comps[i].factor != base.getRawDiscardLevel())
{
// if we didn't get the discard level we're expecting, fail
opj_image_destroy(image);
base.decodeFailed();
return TRUE;
}
}
if(image->numcomps <= first_channel)
{
LL_WARNS("Texture") << "trying to decode more channels than are present in image: numcomps: " << image->numcomps << " first_channel: " << first_channel << LL_ENDL;
if (image)
{
opj_image_destroy(image);
}
base.decodeFailed();
return TRUE;
}
// Copy image data into our raw image format (instead of the separate channel format
S32 img_components = image->numcomps;
S32 channels = img_components - first_channel;
if( channels > max_channel_count )
channels = max_channel_count;
// Component buffers are allocated in an image width by height buffer.
// The image placed in that buffer is ceil(width/2^factor) by
// ceil(height/2^factor) and if the factor isn't zero it will be at the
// top left of the buffer with black filled in the rest of the pixels.
// It is integer math so the formula is written in ceildivpo2.
// (Assuming all the components have the same width, height and
// factor.)
S32 comp_width = image->comps[0].w;
S32 f=image->comps[0].factor;
S32 width = ceildivpow2(image->x1 - image->x0, f);
S32 height = ceildivpow2(image->y1 - image->y0, f);
raw_image.resize(width, height, channels);
U8 *rawp = raw_image.getData();
if (!rawp)
{
opj_image_destroy(image);
base.setLastError("Memory error");
base.decodeFailed();
return true; // done
}
// first_channel is what channel to start copying from
// dest is what channel to copy to. first_channel comes from the
// argument, dest always starts writing at channel zero.
for (S32 comp = first_channel, dest=0; comp < first_channel + channels;
comp++, dest++)
{
if (image->comps[comp].data)
{
S32 offset = dest;
for (S32 y = (height - 1); y >= 0; y--)
{
for (S32 x = 0; x < width; x++)
{
rawp[offset] = image->comps[comp].data[y*comp_width + x];
offset += channels;
}
}
}
else // Some rare OpenJPEG versions have this bug.
{
LL_DEBUGS("Texture") << "ERROR -> decodeImpl: failed to decode image! (NULL comp data - OpenJPEG bug)" << LL_ENDL;
if (image)
{
opj_image_destroy(image);
}
base.decodeFailed();
return TRUE; // done
}
}
/* free image data structure */
opj_image_destroy(image);
return TRUE; // done
}
BOOL LLImageJ2COJ::decodeImpl(LLImageJ2C &base, LLImageRaw &raw_image, F32 decode_time, S32 first_channel, S32 max_channel_count)
{
//
// FIXME: Get the comment field out of the texture
//
LLTimer decode_timer;
opj_dparameters_t parameters; /* decompression parameters */
opj_event_mgr_t event_mgr; /* event manager */
opj_image_t *image = NULL;
opj_dinfo_t* dinfo = NULL; /* handle to a decompressor */
opj_cio_t *cio = NULL;
/* configure the event callbacks (not required) */
memset(&event_mgr, 0, sizeof(opj_event_mgr_t));
event_mgr.error_handler = error_callback;
event_mgr.warning_handler = warning_callback;
event_mgr.info_handler = info_callback;
/* set decoding parameters to default values */
opj_set_default_decoder_parameters(¶meters);
parameters.cp_reduce = base.getRawDiscardLevel();
/* decode the code-stream */
/* ---------------------- */
/* JPEG-2000 codestream */
/* get a decoder handle */
dinfo = opj_create_decompress(CODEC_J2K);
/* catch events using our callbacks and give a local context */
opj_set_event_mgr((opj_common_ptr)dinfo, &event_mgr, stderr);
/* setup the decoder decoding parameters using user parameters */
opj_setup_decoder(dinfo, ¶meters);
/* open a byte stream */
cio = opj_cio_open((opj_common_ptr)dinfo, base.getData(), base.getDataSize());
/* decode the stream and fill the image structure */
image = opj_decode(dinfo, cio);
/* close the byte stream */
opj_cio_close(cio);
/* free remaining structures */
if(dinfo)
{
opj_destroy_decompress(dinfo);
}
// The image decode failed if the return was NULL or the component
// count was zero. The latter is just a sanity check before we
// dereference the array.
if(!image || !image->numcomps)
{
LL_DEBUGS("Texture") << "ERROR -> decodeImpl: failed to decode image!" << LL_ENDL;
if (image)
{
opj_image_destroy(image);
}
return TRUE; // done
}
// sometimes we get bad data out of the cache - check to see if the decode succeeded
for (S32 i = 0; i < image->numcomps; i++)
{
if (image->comps[i].factor != base.getRawDiscardLevel())
{
// if we didn't get the discard level we're expecting, fail
opj_image_destroy(image);
base.mDecoding = FALSE;
return TRUE;
}
}
if(image->numcomps <= first_channel)
{
llwarns << "trying to decode more channels than are present in image: numcomps: " << image->numcomps << " first_channel: " << first_channel << llendl;
if (image)
{
opj_image_destroy(image);
}
return TRUE;
}
// Copy image data into our raw image format (instead of the separate channel format
S32 img_components = image->numcomps;
S32 channels = img_components - first_channel;
if( channels > max_channel_count )
channels = max_channel_count;
// Component buffers are allocated in an image width by height buffer.
// The image placed in that buffer is ceil(width/2^factor) by
// ceil(height/2^factor) and if the factor isn't zero it will be at the
// top left of the buffer with black filled in the rest of the pixels.
// It is integer math so the formula is written in ceildivpo2.
// (Assuming all the components have the same width, height and
// factor.)
S32 comp_width = image->comps[0].w;
S32 f=image->comps[0].factor;
S32 width = ceildivpow2(image->x1 - image->x0, f);
S32 height = ceildivpow2(image->y1 - image->y0, f);
raw_image.resize(width, height, channels);
U8 *rawp = raw_image.getData();
// first_channel is what channel to start copying from
// dest is what channel to copy to. first_channel comes from the
// argument, dest always starts writing at channel zero.
for (S32 comp = first_channel, dest=0; comp < first_channel + channels;
comp++, dest++)
{
if (image->comps[comp].data)
{
S32 offset = dest;
for (S32 y = (height - 1); y >= 0; y--)
{
for (S32 x = 0; x < width; x++)
{
rawp[offset] = image->comps[comp].data[y*comp_width + x];
offset += channels;
}
}
}
else // Some rare OpenJPEG versions have this bug.
{
LL_DEBUGS("Texture") << "ERROR -> decodeImpl: failed to decode image! (NULL comp data - OpenJPEG bug)" << LL_ENDL;
opj_image_destroy(image);
return TRUE; // done
}
}
/* free image data structure */
opj_image_destroy(image);
return TRUE; // done
}
BOOL LLImageJ2COJ::decodeImpl(LLImageJ2C &base, LLImageRaw &raw_image, F32 decode_time, S32 first_channel, S32 max_channel_count)
{
raw_image.decodedComment = LLImageMetaDataReader::ExtractKDUUploadComment(base.getData(), base.getDataSize());
LLTimer decode_timer;
opj_dparameters_t parameters; /* decompression parameters */
opj_event_mgr_t event_mgr; /* event manager */
opj_image_t *image = NULL;
opj_dinfo_t* dinfo = NULL; /* handle to a decompressor */
opj_cio_t *cio = NULL;
/* configure the event callbacks (not required) */
memset(&event_mgr, 0, sizeof(opj_event_mgr_t));
event_mgr.error_handler = error_callback;
event_mgr.warning_handler = warning_callback;
event_mgr.info_handler = info_callback;
/* set decoding parameters to default values */
opj_set_default_decoder_parameters(¶meters);
parameters.cp_reduce = base.getRawDiscardLevel();
/* decode the code-stream */
/* ---------------------- */
/* JPEG-2000 codestream */
/* get a decoder handle */
dinfo = opj_create_decompress(CODEC_J2K);
/* catch events using our callbacks and give a local context */
opj_set_event_mgr((opj_common_ptr)dinfo, &event_mgr, stderr);
/* setup the decoder decoding parameters using user parameters */
opj_setup_decoder(dinfo, ¶meters);
/* open a byte stream */
cio = opj_cio_open((opj_common_ptr)dinfo, base.getData(), base.getDataSize());
/* decode the stream and fill the image structure.
Also fill in an additional structur to get the decoding result.
This structure is a bit unusual in that it is not received through
opj, but still has somt dynamically allocated fields that need to
be cleared up at the end by calling a destroy function. */
opj_codestream_info_t cinfo;
memset(&cinfo, 0, sizeof(opj_codestream_info_t));
image = opj_decode_with_info(dinfo, cio, &cinfo);
/* close the byte stream */
opj_cio_close(cio);
/* free remaining structures */
if(dinfo)
{
opj_destroy_decompress(dinfo);
}
// The image decode failed if the return was NULL or the component
// count was zero. The latter is just a sanity check before we
// dereference the array.
if(!image)
{
LL_WARNS ("Openjpeg") << "Failed to decode image at discard: " << (S32)base.getRawDiscardLevel() << ". No image." << LL_ENDL;
if (base.getRawDiscardLevel() == 0)
{
base.decodeFailed();
}
return TRUE; // done
}
S32 img_components = image->numcomps;
if( !img_components ) // < 1 ||img_components > 4 )
{
LL_WARNS("Openjpeg") << "Failed to decode image at discard: " << (S32)base.getRawDiscardLevel() << ". Wrong number of components: " << img_components << LL_ENDL;
if (image)
{
opj_destroy_cstr_info(&cinfo);
opj_image_destroy(image);
}
if (base.getRawDiscardLevel() == 0)
{
base.decodeFailed();
}
return TRUE; // done
}
// sometimes we get bad data out of the cache - check to see if the decode succeeded
int decompdifference = 0;
if (cinfo.numdecompos) // sanity
{
for (int comp = 0; comp < image->numcomps; comp++)
{
/* get maximum decomposition level difference, first
field is from the COD header and the second
is what is actually met in the codestream, NB: if
everything was ok, this calculation will return
what was set in the cp_reduce value! */
decompdifference = llmax(decompdifference, cinfo.numdecompos[comp] - image->comps[comp].resno_decoded);
}
if (decompdifference < 0) // sanity
{
decompdifference = 0;
}
}
/* if OpenJPEG failed to decode all requested decomposition levels
the difference will be greater than this level */
if (decompdifference > base.getRawDiscardLevel())
{
LL_WARNS("Openjpeg") << "Not enough data for requested discard level " << (S32)base.getRawDiscardLevel() << ", difference: " << (decompdifference - base.getRawDiscardLevel()) << llendl;
opj_destroy_cstr_info(&cinfo);
opj_image_destroy(image);
if (base.getRawDiscardLevel() == 0)
{
base.decodeFailed();
}
return TRUE;
}
if(img_components <= first_channel)
{
LL_WARNS("Openjpeg") << "Trying to decode more channels than are present in image, numcomps: " << img_components << " first_channel: " << first_channel << LL_ENDL;
if (image)
{
opj_destroy_cstr_info(&cinfo);
opj_image_destroy(image);
}
if (base.getRawDiscardLevel() == 0)
{
base.decodeFailed();
}
return TRUE;
}
// Copy image data into our raw image format (instead of the separate channel format
S32 channels = img_components - first_channel;
if( channels > max_channel_count )
channels = max_channel_count;
// Component buffers are allocated in an image width by height buffer.
// The image placed in that buffer is ceil(width/2^factor) by
// ceil(height/2^factor) and if the factor isn't zero it will be at the
// top left of the buffer with black filled in the rest of the pixels.
// It is integer math so the formula is written in ceildivpo2.
// (Assuming all the components have the same width, height and
// factor.)
S32 comp_width = image->comps[0].w;
S32 f=image->comps[0].factor;
S32 width = ceildivpow2(image->x1 - image->x0, f);
S32 height = ceildivpow2(image->y1 - image->y0, f);
raw_image.resize(width, height, channels);
U8 *rawp = raw_image.getData();
// first_channel is what channel to start copying from
// dest is what channel to copy to. first_channel comes from the
// argument, dest always starts writing at channel zero.
for (S32 comp = first_channel, dest=0; comp < first_channel + channels;
comp++, dest++)
{
if (image->comps[comp].data)
{
S32 offset = dest;
for (S32 y = (height - 1); y >= 0; y--)
{
for (S32 x = 0; x < width; x++)
{
rawp[offset] = image->comps[comp].data[y*comp_width + x];
offset += channels;
}
}
}
else // Some rare OpenJPEG versions have this bug.
{
LL_WARNS("Openjpeg") << "Failed to decode image! (NULL comp data - OpenJPEG bug)" << LL_ENDL;
opj_destroy_cstr_info(&cinfo);
opj_image_destroy(image);
if (base.getRawDiscardLevel() == 0)
{
base.decodeFailed();
}
return TRUE; // done
}
}
/* free opj data structures */
if (image)
{
opj_destroy_cstr_info(&cinfo);
opj_image_destroy(image);
}
return TRUE; // done
}
