void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (port) {
case 0:
clrbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
setbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
break;
case 1:
clrbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U1RXD_MASK | GPIO_PAR_UART_U1TXD_MASK);
setbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD);
break;
case 2:
#ifdef CONFIG_SYS_UART2_PRI_GPIO
clrbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD);
setbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD);
#elif defined(CONFIG_SYS_UART2_ALT1_GPIO)
clrbits_8(&gpio->par_feci2c,
GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
setbits_8(&gpio->par_feci2c,
GPIO_PAR_FECI2C_EMDC_U2TXD | GPIO_PAR_FECI2C_EMDIO_U2RXD);
#endif
break;
}
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (port) {
case 0:
clrbits_be16(&gpio->par_uart,
~(GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK));
setbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
break;
case 1:
clrbits_be16(&gpio->par_uart,
~(GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK));
setbits_be16(&gpio->par_uart,
GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
break;
case 2:
clrbits_8(&gpio->par_dspi,
~(GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK));
out_8(&gpio->par_dspi,
GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD);
break;
}
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (port) {
case 0:
clrbits_be16(&gpio->par_uart,
GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
setbits_be16(&gpio->par_uart,
GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
break;
case 1:
clrbits_be16(&gpio->par_uart,
GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
setbits_be16(&gpio->par_uart,
GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
break;
case 2:
#ifdef CONFIG_SYS_UART2_ALT1_GPIO
clrbits_8(&gpio->par_timer, 0xf0);
setbits_8(&gpio->par_timer,
GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
clrbits_8(&gpio->par_feci2c, 0x00ff);
setbits_8(&gpio->par_feci2c,
GPIO_PAR_FECI2C_SCL_UTXD2 | GPIO_PAR_FECI2C_SDA_URXD2);
#elif defined(CONFIG_SYS_UART2_ALT3_GPIO)
clrbits_be16(&gpio->par_ssi, 0x0f00);
setbits_be16(&gpio->par_ssi,
GPIO_PAR_SSI_RXD(2) | GPIO_PAR_SSI_TXD(2));
#endif
break;
}
}
static inline void power_config(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable
*/
clrbits_be16(&immap->im_ioport.iop_pcpar, 0x0002 | 0x0004);
clrbits_be16(&immap->im_ioport.iop_pcso, 0x0002 | 0x0004);
}
int fecpin_setclear(struct eth_device *dev, int setclear)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
struct fec_info_s *info = (struct fec_info_s *)dev->priv;
#ifdef CONFIG_MCF5445x
if (setclear) {
#ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
setbits_be16(&gpio->par_feci2c,
GPIO_PAR_FECI2C_MDC0_MDC0 |
GPIO_PAR_FECI2C_MDIO0_MDIO0);
else
setbits_be16(&gpio->par_feci2c,
GPIO_PAR_FECI2C_MDC1_MDC1 |
GPIO_PAR_FECI2C_MDIO1_MDIO1);
#else
setbits_be16(&gpio->par_feci2c,
GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
#endif
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_RMII_GPIO);
else
setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_RMII_ATA);
} else {
clrbits_be16(&gpio->par_feci2c,
GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
#ifdef CONFIG_SYS_FEC_FULL_MII
setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_MII);
#else
clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC0_UNMASK);
#endif
} else {
#ifdef CONFIG_SYS_FEC_FULL_MII
setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_MII);
#else
clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC1_UNMASK);
#endif
}
}
#endif /* CONFIG_MCF5445x */
#ifdef CONFIG_MCF5441x
if (setclear) {
out_8(&gpio->par_fec, 0x03);
out_8(&gpio->srcr_fec, 0x0F);
clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK,
GPIO_PAR_SIMP0H_DAT_GPIO);
clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK,
GPIO_PDDR_G4_OUTPUT);
clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK);
} else
clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK);
#endif
return 0;
}
void ccm_disable_limp_mode(void)
{
struct ccm_regs *ccm = (struct ccm_regs *)MMAP_CCM;
/* disable limp mode */
clrbits_be16(&ccm->misccr, (1 << 12));
}
void ccm_set_flexbus_half_clock(f_bool half)
{
struct ccm_regs *ccm = (struct ccm_regs *)MMAP_CCM;
if (half)
setbits_be16(&ccm->misccr2, 0x02);
else
clrbits_be16(&ccm->misccr2, 0x02);
}
/*
* brief Exit Limp mode
* warning The PLL should be set and locked prior to exiting Limp mode
*/
void clock_exit_limp(void)
{
ccm_t *ccm = (ccm_t *)MMAP_CCM;
pll_t *pll = (pll_t *)MMAP_PLL;
/* Exit Limp mode */
clrbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
/* Wait for the PLL to lock */
while (!(in_be32(&pll->psr) & PLL_PSR_LOCK))
;
}
static int read_diag(void)
{
int diag;
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
clrbits_be16(&immr->im_ioport.iop_pcdir, PC_4); /* input */
clrbits_be16(&immr->im_ioport.iop_pcpar, PC_4); /* gpio */
setbits_be16(&immr->im_ioport.iop_pcdir, PC_5); /* output */
clrbits_be16(&immr->im_ioport.iop_pcpar, PC_4); /* gpio */
setbits_be16(&immr->im_ioport.iop_pcdat, PC_5); /* 1 */
udelay(500);
if (in_be16(&immr->im_ioport.iop_pcdat) & PC_4) {
clrbits_be16(&immr->im_ioport.iop_pcdat, PC_5);/* 0 */
udelay(500);
if(in_be16(&immr->im_ioport.iop_pcdat) & PC_4)
diag = 0;
else
diag = 1;
} else {
diag = 0;
}
clrbits_be16(&immr->im_ioport.iop_pcdir, PC_5); /* input */
return (diag);
}
int misc_init_r(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#ifdef CONFIG_IDE_LED
/* Configure PA8 as output port */
setbits_be16(&immap->im_ioport.iop_padir, PA_8);
setbits_be16(&immap->im_ioport.iop_paodr, PA_8);
clrbits_be16(&immap->im_ioport.iop_papar, PA_8);
setbits_be16(&immap->im_ioport.iop_padat, PA_8); /* turn it off */
#endif
load_sernum_ethaddr();
setenv("hw","4k");
poweron_key();
return (0);
}
/* initialize higher level parts of CPU like timers */
int cpu_init_r(void)
{
#ifdef CONFIG_MCFFEC
ccm_t *ccm = (ccm_t *) MMAP_CCM;
#endif
#ifdef CONFIG_MCFRTC
rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
rtcex_t *rtcex = (rtcex_t *) &rtc->extended;
out_be32(&rtcex->gocu, CONFIG_SYS_RTC_CNT);
out_be32(&rtcex->gocl, CONFIG_SYS_RTC_SETUP);
#endif
#ifdef CONFIG_MCFFEC
if (CONFIG_SYS_FEC0_MIIBASE != CONFIG_SYS_FEC1_MIIBASE)
setbits_be16(&ccm->misccr, CCM_MISCCR_FECM);
else
clrbits_be16(&ccm->misccr, CCM_MISCCR_FECM);
#endif
return (0);
}
static inline void power_off(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
clrbits_be16(&immap->im_ioport.iop_pcdat, 0x0002 | 0x0004);
}
phys_size_t initdram(int board_type)
{
u32 dramsize;
#if defined(CONFIG_SERIAL_BOOT)
/*
* Serial Boot: The dram is already initialized in start.S
* only require to return DRAM size
*/
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
#else
sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
ccm_t *ccm = (ccm_t *)MMAP_CCM;
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
pm_t *pm = (pm_t *) MMAP_PM;
u32 i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
for (i = 0x13; i < 0x20; i++) {
if (dramsize == (1 << i))
break;
}
out_8(&pm->pmcr0, 0x2E);
out_8(&gpio->mscr_sdram, 1);
clrbits_be16(&ccm->misccr2, CCM_MISCCR2_FBHALF);
setbits_be16(&ccm->misccr2, CCM_MISCCR2_DDR2CLK);
out_be32(&sdram->rcrcr, 0x40000000);
out_be32(&sdram->padcr, 0x01030203);
out_be32(&sdram->cr00, 0x01010101);
out_be32(&sdram->cr01, 0x00000101);
out_be32(&sdram->cr02, 0x01010100);
out_be32(&sdram->cr03, 0x01010000);
out_be32(&sdram->cr04, 0x00010101);
out_be32(&sdram->cr06, 0x00010100);
out_be32(&sdram->cr07, 0x00000001);
out_be32(&sdram->cr08, 0x01000001);
out_be32(&sdram->cr09, 0x00000100);
out_be32(&sdram->cr10, 0x00010001);
out_be32(&sdram->cr11, 0x00000200);
out_be32(&sdram->cr12, 0x01000002);
out_be32(&sdram->cr13, 0x00000000);
out_be32(&sdram->cr14, 0x00000100);
out_be32(&sdram->cr15, 0x02000100);
out_be32(&sdram->cr16, 0x02000407);
out_be32(&sdram->cr17, 0x02030007);
out_be32(&sdram->cr18, 0x02000100);
out_be32(&sdram->cr19, 0x0A030203);
out_be32(&sdram->cr20, 0x00020708);
out_be32(&sdram->cr21, 0x00050008);
out_be32(&sdram->cr22, 0x04030002);
out_be32(&sdram->cr23, 0x00000004);
out_be32(&sdram->cr24, 0x020A0000);
out_be32(&sdram->cr25, 0x0C00000E);
out_be32(&sdram->cr26, 0x00002004);
out_be32(&sdram->cr28, 0x00100010);
out_be32(&sdram->cr29, 0x00100010);
out_be32(&sdram->cr31, 0x07990000);
out_be32(&sdram->cr40, 0x00000000);
out_be32(&sdram->cr41, 0x00C80064);
out_be32(&sdram->cr42, 0x44520002);
out_be32(&sdram->cr43, 0x00C80023);
out_be32(&sdram->cr45, 0x0000C350);
out_be32(&sdram->cr56, 0x04000000);
out_be32(&sdram->cr57, 0x03000304);
out_be32(&sdram->cr58, 0x40040000);
out_be32(&sdram->cr59, 0xC0004004);
out_be32(&sdram->cr60, 0x0642C000);
out_be32(&sdram->cr61, 0x00000642);
asm("tpf");
out_be32(&sdram->cr09, 0x01000100);
udelay(100);
#endif
return dramsize;
};
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
#ifdef CONFIG_MCF5441x
pm_t *pm = (pm_t *) MMAP_PM;
#endif
/* Setup Ports: */
switch (port) {
#ifdef CONFIG_MCF5441x
case 0:
/* UART0 */
out_8(&pm->pmcr0, 24);
clrbits_8(&gpio->par_uart0,
~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK));
setbits_8(&gpio->par_uart0,
GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD);
break;
case 1:
/* UART1 */
out_8(&pm->pmcr0, 25);
clrbits_8(&gpio->par_uart1,
~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK));
setbits_8(&gpio->par_uart1,
GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD);
break;
case 2:
/* UART2 */
out_8(&pm->pmcr0, 26);
clrbits_8(&gpio->par_uart2,
~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK));
setbits_8(&gpio->par_uart2,
GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD);
break;
case 3:
/* UART3 */
out_8(&pm->pmcr0, 27);
clrbits_8(&gpio->par_dspi0,
~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK));
setbits_8(&gpio->par_dspi0,
GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD);
break;
case 4:
/* UART4 */
out_8(&pm->pmcr1, 24);
clrbits_8(&gpio->par_uart0,
~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK));
setbits_8(&gpio->par_uart0,
GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD);
break;
case 5:
/* UART5 */
out_8(&pm->pmcr1, 25);
clrbits_8(&gpio->par_uart1,
~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK));
setbits_8(&gpio->par_uart1,
GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD);
break;
case 6:
/* UART6 */
out_8(&pm->pmcr1, 26);
clrbits_8(&gpio->par_uart2,
~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK));
setbits_8(&gpio->par_uart2,
GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD);
break;
case 7:
/* UART7 */
out_8(&pm->pmcr1, 27);
clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK);
clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK);
setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD);
setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD);
break;
case 8:
/* UART8 */
out_8(&pm->pmcr0, 28);
clrbits_8(&gpio->par_cani2c,
~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK));
setbits_8(&gpio->par_cani2c,
GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD);
break;
case 9:
/* UART9 */
out_8(&pm->pmcr1, 29);
clrbits_8(&gpio->par_cani2c,
~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK));
setbits_8(&gpio->par_cani2c,
GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
break;
#endif
#ifdef CONFIG_MCF5445x
case 0:
clrbits_8(&gpio->par_uart,
GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
setbits_8(&gpio->par_uart,
GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
break;
case 1:
#ifdef CONFIG_SYS_UART1_PRI_GPIO
clrbits_8(&gpio->par_uart,
GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
setbits_8(&gpio->par_uart,
GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
#elif defined(CONFIG_SYS_UART1_ALT1_GPIO)
clrbits_be16(&gpio->par_ssi,
~(GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK));
setbits_be16(&gpio->par_ssi,
GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD);
#endif
break;
case 2:
#if defined(CONFIG_SYS_UART2_ALT1_GPIO)
clrbits_8(&gpio->par_timer,
~(GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK));
setbits_8(&gpio->par_timer,
GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD);
#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
clrbits_8(&gpio->par_timer,
~(GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK));
setbits_8(&gpio->par_timer,
GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
#endif
break;
#endif /* CONFIG_MCF5445x */
}
}
static int serial_mpc8xx_probe(struct udevice *dev)
{
immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
smc_t __iomem *sp;
smc_uart_t __iomem *up;
cpm8xx_t __iomem *cp = &(im->im_cpm);
struct serialbuffer __iomem *rtx;
/* initialize pointers to SMC */
sp = cp->cp_smc + SMC_INDEX;
up = (smc_uart_t __iomem *)&cp->cp_dparam[PROFF_SMC];
/* Disable relocation */
out_be16(&up->smc_rpbase, 0);
/* Disable transmitter/receiver. */
clrbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
/* Enable SDMA. */
out_be32(&im->im_siu_conf.sc_sdcr, 1);
/* clear error conditions */
out_8(&im->im_sdma.sdma_sdsr, CONFIG_SYS_SDSR);
/* clear SDMA interrupt mask */
out_8(&im->im_sdma.sdma_sdmr, CONFIG_SYS_SDMR);
/* Use Port B for SMCx instead of other functions. */
setbits_be32(&cp->cp_pbpar, IOPINS);
clrbits_be32(&cp->cp_pbdir, IOPINS);
clrbits_be16(&cp->cp_pbodr, IOPINS);
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
rtx = (struct serialbuffer __iomem *)&cp->cp_dpmem[CPM_SERIAL_BASE];
/* Allocate space for two buffer descriptors in the DP ram.
* For now, this address seems OK, but it may have to
* change with newer versions of the firmware.
* damm: allocating space after the two buffers for rx/tx data
*/
out_be32(&rtx->rxbd.cbd_bufaddr, (__force uint)&rtx->rxbuf);
out_be16(&rtx->rxbd.cbd_sc, 0);
out_be32(&rtx->txbd.cbd_bufaddr, (__force uint)&rtx->txbuf);
out_be16(&rtx->txbd.cbd_sc, 0);
/* Set up the uart parameters in the parameter ram. */
out_be16(&up->smc_rbase, CPM_SERIAL_BASE);
out_be16(&up->smc_tbase, CPM_SERIAL_BASE + sizeof(cbd_t));
out_8(&up->smc_rfcr, SMC_EB);
out_8(&up->smc_tfcr, SMC_EB);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART);
/* Mask all interrupts and remove anything pending.
*/
out_8(&sp->smc_smcm, 0);
out_8(&sp->smc_smce, 0xff);
/* Set up the baud rate generator */
serial_mpc8xx_setbrg(dev, gd->baudrate);
/* Make the first buffer the only buffer. */
setbits_be16(&rtx->txbd.cbd_sc, BD_SC_WRAP);
setbits_be16(&rtx->rxbd.cbd_sc, BD_SC_EMPTY | BD_SC_WRAP);
/* single/multi character receive. */
out_be16(&up->smc_mrblr, CONFIG_SYS_SMC_RXBUFLEN);
out_be16(&up->smc_maxidl, CONFIG_SYS_MAXIDLE);
out_be32(&rtx->rxindex, 0);
/* Initialize Tx/Rx parameters. */
while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */
;
out_be16(&cp->cp_cpcr,
mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG);
while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */
;
/* Enable transmitter/receiver. */
setbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
return 0;
}
