void
MappedLevelFluxRegister::incrementCoarse(const FArrayBox& a_coarseFlux,
Real a_scale,
const DataIndex& a_coarseDataIndex,
const Interval& a_srcInterval,
const Interval& a_dstInterval,
int a_dir,
Side::LoHiSide a_sd)
{
CH_assert(isDefined());
if (!(m_isDefined & FluxRegCoarseDefined)) return;
CH_TIME("MappedLevelFluxRegister::incrementCoarse");
const Vector<Box>& intersect =
m_coarseLocations[a_dir + a_sd * CH_SPACEDIM][a_coarseDataIndex];
FArrayBox& coarse = m_coarFlux[a_coarseDataIndex];
// We cast away the constness in a_coarseFlux for the scope of this function. This
// should be acceptable, since at the end of the day there is no change to it. -JNJ
FArrayBox& coarseFlux = const_cast<FArrayBox&>(a_coarseFlux); // Muhahaha.
coarseFlux.shiftHalf(a_dir, sign(a_sd));
Real scale = -sign(a_sd) * a_scale;
int s = a_srcInterval.begin();
int d = a_dstInterval.begin();
int size = a_srcInterval.size();
for (int b = 0; b < intersect.size(); ++b) {
const Box& box = intersect[b];
Vector<Real> regbefore(coarse.nComp());
Vector<Real> regafter(coarse.nComp());
if (s_verbose && (a_dir == debugdir) && box.contains(ivdebnoeb)) {
for (int ivar = 0; ivar < coarse.nComp(); ivar++) {
regbefore[ivar] = coarse(ivdebnoeb, ivar);
}
}
coarse.plus(coarseFlux, box, box, scale, s, d, size);
if (s_verbose && (a_dir == debugdir) && box.contains(ivdebnoeb)) {
for (int ivar = 0; ivar < coarse.nComp(); ivar++) {
regafter[ivar] = coarse(ivdebnoeb, ivar);
}
pout() << "levelfluxreg::incrementCoar: scale = " << scale << ", ";
for (int ivar = 0; ivar < coarse.nComp(); ivar++) {
pout() << " input flux = " << coarseFlux(ivdebnoeb, ivar) << ", ";
pout() << " reg before = " << regbefore[ivar] << ", ";
pout() << " reg after = " << regafter[ivar] << ", ";
}
pout() << endl;
}
}
coarseFlux.shiftHalf(a_dir, - sign(a_sd));
}
void update_hash(string coordfile) {
ifstream coordstream(coordfile);
floatVector fine(3);
intVector fineInt(3);
intVector coarse(3);
while(coordstream.good()) {
coordstream >> fine[0]; coordstream >> fine[1]; coordstream >> fine[2];
for (int z=0; z<2; z++)
for (int y=0; y<2; y++)
for (int x=0; x<2; x++) {
fineInt[0]=(int)fine[0]+x; fineInt[1]=(int)fine[1]+y; fineInt[2]=(int)fine[2]+z;
conn_profile()[fineInt]=vector<float>(); // just to store the key
}
fine2coarse(fine, coarse);
if (!coarse_map().count(coarse))
coarse_map()[coarse] = coarse_map().size();
}
}
void
Elastic::V_Coarsen_Patch_Strategy::fix_boundary_elements_2D
(SAMRAI::pdat::SideData<double>& v,
const SAMRAI::pdat::SideData<double>& v_fine,
const boost::shared_ptr<SAMRAI::pdat::SideData<double> > dv_mixed,
const std::vector<SAMRAI::hier::BoundaryBox> &boundaries) const
{
/* FIXME: Why is this required? Shouldn't the boundary points be
ok? They are partially interpolated from the coarse level, but
that should not be a problem. Unfortunately, it is a problem,
because removing this routine generates nan's. */
/* Fix up the boundary elements by iterating through the boundary
boxes */
/* We only care about edges, not corners, so we only iterate over
edge boundary boxes. */
SAMRAI::hier::Box gbox(v_fine.getGhostBox());
SAMRAI::hier::Index ip(1,0), jp(0,1);
for(size_t mm=0; mm<boundaries.size(); ++mm)
{
SAMRAI::hier::Box bbox=boundaries[mm].getBox();
int location_index=boundaries[mm].getLocationIndex();
SAMRAI::hier::Index
lower=SAMRAI::hier::Index::coarsen(bbox.lower(),
SAMRAI::hier::Index(2,2)),
upper=SAMRAI::hier::Index::coarsen(bbox.upper(),
SAMRAI::hier::Index(2,2));
for(int j=lower(1); j<=upper(1); ++j)
for(int i=lower(0); i<=upper(0); ++i)
{
/* Fix vx */
if(location_index==0)
{
SAMRAI::pdat::SideIndex coarse(SAMRAI::hier::Index(i,j),0,
SAMRAI::pdat::SideIndex::Upper);
SAMRAI::pdat::SideIndex x(coarse*2);
if(x[1]>=gbox.lower(1) && x[1]<gbox.upper(1))
{
v(coarse)=(v_fine(x) + v_fine(x+jp))/2;
if(have_faults() && !is_residual)
v(coarse)+=((*dv_mixed)(x,0) + (*dv_mixed)(x+jp,1))/2;
}
}
else if(location_index==1)
{
SAMRAI::pdat::SideIndex coarse(SAMRAI::hier::Index(i,j),0,
SAMRAI::pdat::SideIndex::Lower);
SAMRAI::pdat::SideIndex x(coarse*2);
if(x[1]>=gbox.lower(1) && x[1]<gbox.upper(1))
{
v(coarse)=(v_fine(x) + v_fine(x+jp))/2;
if(have_faults() && !is_residual)
v(coarse)+=((*dv_mixed)(x,0) + (*dv_mixed)(x+jp,1))/2;
}
}
/* Fix vy */
else if(location_index==2)
{
SAMRAI::pdat::SideIndex coarse(SAMRAI::hier::Index(i,j),1,
SAMRAI::pdat::SideIndex::Upper);
SAMRAI::pdat::SideIndex y(coarse*2);
if(y[0]>=gbox.lower(0) && y[0]<gbox.upper(0))
{
v(coarse)=(v_fine(y) + v_fine(y+ip))/2;
if(have_faults() && !is_residual)
v(coarse)+=((*dv_mixed)(y,0) + (*dv_mixed)(y+ip,1))/2;
}
}
else if(location_index==3)
{
SAMRAI::pdat::SideIndex coarse(SAMRAI::hier::Index(i,j),1,
SAMRAI::pdat::SideIndex::Lower);
SAMRAI::pdat::SideIndex y(coarse*2);
if(y[0]>=gbox.lower(0) && y[0]<gbox.upper(0))
{
v(coarse)=(v_fine(y) + v_fine(y+ip))/2;
if(have_faults() && !is_residual)
v(coarse)+=((*dv_mixed)(y,0) + (*dv_mixed)(y+ip,1))/2;
}
}
else
{
abort();
}
}
}
}
