// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain();
}
void kmain (void)
{
cpu = &cpus[0];
uart_init (P2V(UART0));
init_vmm ();
kpt_freerange (align_up(&end, PT_SZ), P2V_WO(INIT_KERNMAP));
paging_init (INIT_KERNMAP, PHYSTOP);
kmem_init ();
kmem_init2(P2V(INIT_KERNMAP), P2V(PHYSTOP));
trap_init (); // vector table and stacks for models
gic_init(P2V(VIC_BASE)); // arm v2 gic init
uart_enable_rx (); // interrupt for uart
consoleinit (); // console
pinit (); // process (locks)
binit (); // buffer cache
fileinit (); // file table
iinit (); // inode cache
ideinit (); // ide (memory block device)
#ifdef INCLUDE_REMOVED
timer_init (HZ); // the timer (ticker)
#endif
sti ();
userinit(); // first user process
scheduler(); // start running processes
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // detect other processors
lapicinit(); // interrupt controller
seginit(); // segment descriptors
cprintf("\ncpu%d: starting xv6\n\n", cpunum());
picinit(); // another interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // console hardware
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain(); // finish this processor's setup
init_semaphores_on_boot();
}
// Bootstrap processor starts running C code here.
int
main(int memsize)
{
mpinit(); // collect info about this machine
lapicinit(mpbcpu());
ksegment();
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
cprintf("cpus %p cpu %p\n", cpus, cpu);
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
cprintf("mem: %d kb\n", memsize);
kinit(memsize); // physical memory allocator
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
pageinit(); // enable paging
userinit(); // first user process
bootothers(); // start other processors
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator // kmem. freelist added
cprintf("%x \n", end);
kvmalloc(); // kernel page table
#ifdef CONFIG_MULTI_PROCESS
mpinit(); // collect info about this machine
#endif
lapicinit();
seginit(); // set up segments
picinit(); // interrupt controller: Programmable Interrupt Controller
#ifdef CONFIG_MULTI_PROCESS
ioapicinit(); // another interrupt controller
#endif
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
#ifdef CONFIG_MULTI_PROCESS
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
#endif
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
unsigned char FB[]="MESSAGE WRITTEN THROUGH FRAMEBUFFER!!";
fb_init(); // initialize framebuffer device (2015.11.02)
cprintf("\nUsing Framebuffer still presents some problems :(\n\n");
cprintf("\nSuggestion: review the way it is used in console.c\n\n");
fb_write(FB, sizeof(FB)); // Framebuffer maybe could be used before this moment (2015.11.02)
see_mylock(MYLOCK);
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit(mpbcpu());
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors (must come before kinit)
kinit(); // initialize memory allocator
userinit(); // first user process (must come after kinit)
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
monitor_clear ();
// Print basic system information.
cprintf ("Ensidia\n\n");
cprintf ("Copyright (c) 2013-2014 Fotis Koutoulakis\n");
cprintf ("Based on xv6 by Russ Cox et al, at MIT CSAIL\n");
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xng kernel\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
/*int main(void){*/
void kmain(void){
// vga_init();
// puts((uint8_t*)"Hello kernel world!\n");
/*do some work here, like initialize timer or paging*/
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
// gdt_descriptor();
// puts((uint8_t*)"GDT initialized...\n");
// idt_descriptor();
// puts((uint8_t*)"IDT initialized...\n");
// cprintf("IDT initialized...\n");
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
initGraphMode();
initDom();
tryOnce();
toggleOn();
pinit(); // process table
toggleOn();
tvinit(); // trap vectors
toggleOn();
binit(); // buffer cache
toggleOn();
fileinit(); // file table
toggleOn();
iinit(); // inode cache
toggleOn();
ideinit(); // disk
toggleOn();
if(!ismp)
timerinit(); // uniprocessor timer
toggleOn();
startothers(); // start other processors
toggleOn();
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
toggleOn();
txt_initLock();
mouseEnable();
initProcessMsgMap();
userinit(); // first user process
toggleOn();
endToggle();
// Finish setting up this processor in mpmain.
mpmain();
}
// Os procedimentos de inicialização começam a executar o
// código .C a partir daqui.
// Aloca uma pilha real e troca para ela, primeiro fazendo
// algumas configurações necessárias par o alocador de memória funcionar.
int main(void) {
kinit1(end, P2V(4*1024*1024)); // alocador de páginas de memória física
kvmalloc(); // tabela de páginas do kernel
mpinit(); // detecta outros processadores
lapicinit(); // controlador de interrupções
seginit(); // descritores de segmentos
picinit(); // desabilita pic
ioapicinit(); // outro controlador de interrupções
consoleinit(); // console hardware
uartinit(); // porta serial
pinit(); // tabela de processos
tvinit(); // vetores trap
binit(); // buffer cache
fileinit(); // tabela de arquivo
ideinit(); // disco
startothers(); // inicia outros processadores
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // deve vir após startothers()
userinit(); // primeiro processo no modo usuário
mpmain(); // encerra esta configuração de processadores
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // detect other processors
lapicinit(); // interrupt controller
seginit(); // segment descriptors
picinit(); // disable pic
ioapicinit(); // another interrupt controller
consoleinit(); // console hardware
uartinit(); // serial port
pinit(); // process table
shminit(); // shared memory
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain(); // finish this processor's setup
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
monitor_clear();
xylos_logo();
kinit1(end, P2V(4 * 1024 * 1024)); // phys page allocator, 16MB for kernel
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("Initializing interrupts... ");
init_generic_irq_table();
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Initializing console and serial... ");
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Setting up swap space disk... ");
swapinit();
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Initializing tasking... ");
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Initializing pipe IPC... ");
init_pipe_ipc_system();
if(pipe_ipc_sanitycheck() == 0) {
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
cprintf("Initializing direct IPC... ");
init_direct_ipc_table();
if(direct_ipc_sanitycheck() == 0) {
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
cprintf("Mounting root filesystem... ");
fileinit(); // file table
ideinit(); // disk
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
if(!ismp) {
cprintf("Starting up uniprocessor CPU... ");
timerinit(); // uniprocessor timer
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
if(ismp) {
if(ncpu > 1) {
cprintf("Starting up %d CPU cores... ", ncpu);
} else {
cprintf("Starting up %d CPU core... ", ncpu);
}
}
startothers(); // start other processors
kinit2(P2V(4 * 1024 * 1024), P2V(PHYSTOP)); // 16MB to PHYSTOP [234MB]
if(ismp) {
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
// detects and starts km drivers
auto_enable_nic();
// first user process
userinit();
// Finish setting up this processor in mpmain.
mpmain();
}
int main(int _argc, char **_argv) {
int framecount=0;
int sramcount=0;
argc=_argc, argv=_argv;
defaultExceptionHandler();
fifoSendValue32(FIFO_USER_06, (u32)ipc_region);
DS_init(); //DS init.
#ifndef ROM_EMBEDED
active_interface = fatInitDefault(); //init file operations to your external card.
initNiFi();
#endif
EMU_Init(); //emulation init.
irqSet(IRQ_VBLANK, vblankinterrupt);
irqEnable(IRQ_HBLANK);
//fifoSetValue32Handler(FIFO_USER_06, aliveinterrupt, 0);
//fifoSetValue32Handler(FIFO_USER_05, reg4015interrupt, 0);
IPC_ALIVE = 0;
IPC_APUIRQ = 0;
IPC_REG4015 = 0;
consoleinit(); //init subscreen to show chars.
crcinit(); //init the crc table.
//pre-alocate memory....
//IPC_FILES = malloc(MAXFILES * 256 + MAXFILES * 4);
//IPC_ROM = malloc(ROM_MAX_SIZE);
#ifndef ROM_EMBEDED
if(!bootext()) {
//chdir("/");
do_rommenu(); //show a menu selecting rom files.
}
#else
do_romebd();
#endif
//__emuflags |= PALSYNC;
while(1) { // main loop to do the emulation
framecount++;
if(__emuflags & PALTIMING && global_playcount == 0) {
framecount--;
}
if(debuginfo[VBLS]>59) {
debuginfo[VBLS]-=60;
debuginfo[1] = debuginfo[0];
debuginfo[0] = 0;
debuginfo[FPS]=framecount;
framecount=0;
}
scanKeys();
IPC_KEYS = keysCurrent();
//change nsf states
if(__emuflags & NSFFILE) {
static int oldkey = 0;
int keydown = IPC_KEYS & (~oldkey);
oldkey = IPC_KEYS;
if(keydown & KEY_LEFT) {
if(__nsfsongno == 0) {
__nsfsongno = nsfheader.TotalSong-1;
} else {
__nsfsongno--;
}
}
if(keydown & KEY_RIGHT) {
if(++__nsfsongno > nsfheader.TotalSong-1) {
__nsfsongno = 0;
}
}
if(keydown & KEY_UP) {
__nsfplay = 1;
__nsfinit = 1;
}
if(keydown & KEY_DOWN) {
__nsfplay = 0;
Sound_reset();
}
}
do_shortcuts();
if((__emuflags & AUTOSRAM)) {
if(__emuflags & NEEDSRAM) {
sramcount = 1;
__emuflags&=~NEEDSRAM;
}
if(sramcount > 0)
sramcount++;
if(sramcount > 120) { //need auto save for sram.
sramcount = 0;
save_sram();
}
}
touch_update(); // do menu functions.
do_menu(); //do control menu.
do_multi();
if(nifi_stat == 0 || nifi_stat >= 5)
play(); //emulate a frame of the NES game.
else
swiWaitForVBlank();
}
}