int main(int argc, char *argv[])
{
#include "setRootCase.H"
#include "createTime.H"
#include "createMesh.H"
#include "readGravitationalAcceleration.H"
#include "createFields.H"
#include "createMRFZones.H"
#include "createFvOptions.H"
#include "initContinuityErrs.H"
#include "readTimeControls.H"
#include "CourantNos.H"
#include "setInitialDeltaT.H"
pimpleControl pimple(mesh);
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Info<< "\nStarting time loop\n" << endl;
while (runTime.run())
{
#include "readTimeControls.H"
#include "CourantNos.H"
#include "setDeltaT.H"
runTime++;
Info<< "Time = " << runTime.timeName() << nl << endl;
// --- Pressure-velocity PIMPLE corrector loop
while (pimple.loop())
{
fluid.solve();
fluid.correct();
volScalarField contErr1
(
fvc::ddt(alpha1, rho1) + fvc::div(alphaRhoPhi1)
- (fvOptions(alpha1, rho1)&rho1)
);
volScalarField contErr2
(
fvc::ddt(alpha2, rho2) + fvc::div(alphaRhoPhi2)
- (fvOptions(alpha2, rho2)&rho2)
);
#include "UEqns.H"
//~ #include "EEqns.H"
thermo1.correct();
thermo2.correct();
// --- Pressure corrector loop
while (pimple.correct())
{
#include "pEqn.H"
}
#include "DDtU.H"
if (pimple.turbCorr())
{
fluid.correctTurbulence();
}
}
#include "write.H"
Info<< "ExecutionTime = "
<< runTime.elapsedCpuTime()
<< " s\n\n" << endl;
}
Info<< "End\n" << endl;
return 0;
}
int main(int argc, char *argv[])
{
#include "setRootCase.H"
#include "createTime.H"
#include "createMesh.H"
#include "readGravitationalAcceleration.H"
#include "createFields.H"
#include "createMRFZones.H"
#include "createFvOptions.H"
#include "initContinuityErrs.H"
#include "readTimeControls.H"
#include "CourantNos.H"
#include "setInitialDeltaT.H"
//for testing only with a constant interpahse mass transfer term
dimensionedScalar gamma_LV
("gamma_LV",
dimensionSet (1,-3,-1,0,0,0,0),
scalar(0.000));
dimensionedScalar gamma_VL
("gamma_LV",
dimensionSet (1,-3,-1,0,0,0,0),
scalar(0.000));
// pipeline dimension
dimensionedScalar Dh
("Dh",
dimensionSet (0,1,0,0,0,0,0),
scalar(0.233));
// initial wall temperature
dimensionedScalar TwallInit
("TwallInit",
dimensionSet (0,0,0,1,0,0,0),
scalar(289.43));
// friction factor
scalar frictionFactor = 0.005;
//my volScalarField declaration
#include "myVolScalar.H"
//quasi-one-dimensional flow setup
#include "changeArea.H"
//load refprop thermodynamic library
#include "refpropLibLoading.H"
//initialise the wall temperature
Twall = TwallInit;
//dummy vector
vector unity(1,0,0);
//start of the loop
pimpleControl pimple(mesh);
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Info<< "\nStarting time loop\n" << endl;
while (runTime.run())
{
#include "readTimeControls.H"
#include "CourantNos.H"
#include "setDeltaT.H"
// interface mass and heat transfer
#include "massAndEnergyTransfer.H"
// update boundary conditions (NSCBC)
#include "NSCBCpuncture.H"
// update wall flux (heat transfer to the vapour phase from the wall)
#include "transportProperties.H"
// runtime time output
runTime++;
Info<< "Time = " << runTime.timeName() << nl << endl;
// --- Pressure-velocity PIMPLE corrector loop
while (pimple.loop())
{
fluid.solve();
fluid.correct();
// interface mass and heat transfer
//#include "massAndEnergyTransfer.H"
// update boundary conditions
p.boundaryField()[patchID] == p_ghost_update2;
U1.boundaryField()[patchID] == vector(U_ghost_update2,0,0);
U2.boundaryField()[patchID] == vector(U_ghost_update2,0,0);
//thermo1.T().boundaryField()[patchID] == T_ghost_update;
//thermo2.T().boundaryField()[patchID] == T_ghost_update;
//alpha1.boundaryField()[patchID] == alpha1_ghost_update;
//alpha2.boundaryField()[patchID] == 1.0 - alpha1_ghost_update;
U_bulk = mag(alpha1*U1+alpha2*U2);
rho_bulk = alpha1*rho1+alpha2*rho2;
psi_bulk =1.0/(alpha1/thermo1.psi()+alpha2/thermo2.psi());
volScalarField contErr1
(
fvc::ddt(alpha1, rho1) + fvc::div(alphaRhoPhi1)
- (fvOptions(alpha1, rho1)&rho1) // fvOptions are the runtime semi-implicit source term
+ alpha1*rho1*mag(U1)*areaSource
- gammaV
);
volScalarField contErr2
(
fvc::ddt(alpha2, rho2) + fvc::div(alphaRhoPhi2)
- (fvOptions(alpha2, rho2)&rho2)
+ alpha2*rho2*mag(U2)*areaSource
- gammaL
);
// update friction source term
Fv = - scalar(2)*frictionFactor*alpha1*rho1*mag(U1)*mag(U1)/Dh;
Fl = - scalar(2)*frictionFactor*alpha2*rho2*mag(U2)*mag(U2)/Dh;
#include "UEqns.H"
// update friction source term for energy balance
U_bulk = mag(alpha1*U1+alpha2*U2);
FvU_bulk = U_bulk*Fv;
FlU_bulk = U_bulk*Fl;
#include "EEqns.H"
// --- Pressure corrector loop
while (pimple.correct())
{
#include "pEqn.H"
}
#include "DDtU.H"
if (pimple.turbCorr())
{
fluid.correctTurbulence();
}
}
#include "write.H"
//const volScalarField& test = alpha1_.db().lookupObject<volScalarField>("flowAreaGrad");
//loop over all cells:
//forAll(mesh.C(), cellI)
//{
//Info << "******* CellID: " << cellI << "*******"<< endl;
//Getting list of all faces of current cell
//const labelList& faces = mesh.cells()[cellI];
//loop over all faces of current cell
//forAll( faces, faceI )
//{
//if (mesh.isInternalFace(faces[faceI]))
//{
//Info << "internal faceI: " << faceI << " mesh.Sf()[faceI]: " << -mesh.Sf()[faceI] << " mesh.magSf()[faceI]: " << mesh.magSf()[faceI] << endl;
//}
//else
//{
//Info << "boundary faceI: " << faceI << " mesh.Sf()[faceI]: " << -mesh.Sf()[faceI] << " mesh.magSf()[faceI]: " << mesh.magSf()[faceI] << endl;
//}
//} //move on to next face
//Info << " " << endl;
//}//move on to next cell
Info<< "ExecutionTime = "
<< runTime.elapsedCpuTime()
<< " s\n\n" << endl;
}
Info<< "End\n" << endl;
return 0;
}